Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets.
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc.
• Develop the work schedule and coordination of the project works to ensure project is on schedule.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Prepare all relevant checklist for Installation and Testing & Commissioning Works.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works.

Requirements

• Degree in Mechanical Engineering.
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage.
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office.
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc.
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client.
• Good technical knowledge in understanding the Mechanical System.
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time on project site.

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Company Write Up:

Durapower is 15 years in operations and is company identified by Enterprise Singapore to scale up for growth as well. We have projects in Netherlands, Singapore, Thailand and Southeast Asia regions, production is in China as a manufacturing plant. There is no manufacturing here, but we have R&D team here liaising with China as well to execute trade of cells, battery modular systems packs enabling green industry applications. Our expansion is also enhanced by the stakes and investment in us through Banpu Next (Banpu Group) which is listed on the Thailand Stock Exchange.

You may refer to the news here: https://en.prnasia.com/releases/apac/durapower-to-advance-global-expansion-plan-after-us-70-million-investment-from-banpu-next-394762.shtml

Video by Management on Durapower:

https://www.linkedin.com/posts/activity-6945009405591465984-ew1t?utm_source=linkedin_share&utm_medium=member_desktop_web

This position will be supported by Enterprise Singapore on the Singapore Global Executive Programme (Companies) (enterprisesg.gov.sg).

You may read up on Durapower's Management Associate Programme - Durapower-management-associate-programme – Durapower Group.

Job Description: Mechanical Engineer (ESG-SGEP)

The specialization of this job role will enable mechanical & structural design initiatives.

Responsibilities

· Serve as local design lead for customized design and pre-sales proposal, platform design, design-changes, trials, and root-cause analysis.

· Own mechanical and structural analysis using CAE tools.

· Own basic on-site component and system level testing to support design and specification changes, coordinate validation testing for changes with global team.

· Organize Root-Cause & Corrective Analysis for design issues

· Collaborate directly with Manufacturing, Process, and Quality to solve yield barriers and scrap issues

Requirements

· Degree with less than 3 years of experience in Mechanical Engineering

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Ensure all monitoring system of the building management faciities are in good operating condition (error free) and feedback on all alarms and errors generated form BMS.
• Perform scheduling of facilities and building management services to facilitate events and arising requirement.
• Reporting and compilation of daily, feedback, building management facilities faults and activities.
• Operate the plant at the most efficient operating condition and ensure all abnormities are reported for corrective actions
• Validate all facilities & Building management maintenance work carried out by the contractors and ensure compliance to the prescribed standards
• Perform routine building management facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, ACMV outages.
• Analyse data and identify trends with facility issues to determine root cause and take appropriate action.
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects M&E operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 activities to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Maintain compliance with local workplace safety & health (WSH) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP) and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participates in the building management maintenance of all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Participates in cross functional coordination

• Higher Nitec / Diploma / Degree in Mechanical or equivalent.
• Minimum 3 years' of practical electrical and mechanical engineering experience in managing and implementing electrical & mechanical systems for critical building management facilities for telecom, broadcast or data centre buildings.
• Respect, Teamwork and Drive.
• Hands on Troubleshooting
• Stay contactable 24 x 7
• Perform rotation Shift duties

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

C2D Solutions Pte Ltd is Hiring!!!

Only Singaporean and SPR need to apply!

Web: www.c2d.com.sg

Tel: +65 6392 2949

Job Description: Mechanical & Electrical Engineer

Company Overview

• C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimisation.
• We were established in 2012 and operates as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions.
• We have a team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers to ensure first-rate engineering solutions for our clients.
• We have grown over the years and are continuously increasing our market presence and are seeking like-minded individuals to join our team as a Mechanical & Electrical Engineer.

Job Responsibilities:

• Design and commissioning of building mechanical & electrical systems including, fire protection, air-conditioning & mechanical ventilation, smoke control systems, power distribution systems, lighting systems, etc.
• Perform Computational Fluid Dynamics simulations to design & optimize ventilation, pollution control and fire & smoke control systems.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements.
• Participate in Testing & Commissioning phase of completed mechanical & electrical installations.
• Appointed engineers will be attached to Senior Engineers who will provide Internal Training and Supervision.

Why you should apply:

1. We are a progressive company that place equal emphasis on personal and professional growth.
2. Appointed engineers with interest and potential will beoffered sponsorship to continue professional upgrading tofurther their engineering career development.
3. Career development includes the opportunity to register as aProfessional Engineer (PE) and/or Fire Safety Engineer (FSE).
4. Opportunities to work on dynamic and impactful buildingprojects
5. Our projects’ portfolio includes pharmaceutical & semi-conductor manufacturing facilities, air & land infra-structurefacilities, hospitality & conventions facilities, etc.

C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimization. We were establishedin 2012 and operate as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions. Our team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers ensure first-rate engineering solutions for our clients. Since 2012 we have grown exponentially and are continuously increasing our market presence and are seeking like-minded individuals with mechanical engineering or building services degrees to join our team as a Mechanical & Electrical Engineer.

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

Job Position:

Mechanical Engineer

Job Description:
We would like to recruit a Mechanical Engineer to aid our team in the development of a custom 3D printer. The machine would require a complex tool swapping system for custom built extruders. Furthermore, it will require automation mechanisms to increase production volume and efficiency
• Design and develop a 3D printer, including the kinematics, electronics, and thermal components. Generating a BOM of all parts required based on knowledge of 3D printing systems.
• Generate a detailed CAD model that shows the assembly process of the machine, to be provided to suppliers for the purchasing of parts.
• Generate custom G-Code to accommodate for the tool changing
• Generate custom G-Code for the automation mechanisms
• Include safety precautions for the multiple extruders and build plate
• Optimise the design as the project progresses through troubleshooting design flaws during testing, allowing for a more reliable printer.

Required/Preferred Skills:

• CAD Profiency
• Product Design and Design for Manufacturing & Assembly
• Electrical wiring and Electronics
• Problem-Solving
• Testing and Validation
• Project Management
• Familiarity and experience assembling and upgrading FDM systems
• Enthusiasm in building and problem solving

Required/Preferred Qualifications:

Bachelor’s or master’s degree in mechanical engineering, Mechatronics, or a related field.

Experiences:

3+ years of experience in mechanical design, preferably with building customised 3d printer experience and related AM skills

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Deliver technical design of CNC solutions for customize specification.
• Produce 2D&3D engineering drawings using Solidwork and CATIA.
• Analyze existing systems and improve designs.
• Conduct technical design review and evaluation to ensure compliance to standards.
• Documenting the design process, iterations for fabrication.
• Perform other duties as assigned.

Job Requirement:

• Good interpersonal and communication skill
• Proficiency with engineering design programs such as AutoCAD, Solidworks
• Knowledge of design and engineering principles
• Attentive to detail and critically minded
• Welcoming fresh graduate from mechanical engineering

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Purpose:
To independently define concepts, critical deliverables, lead, plan, manage and control engineering deliverables required for the assigned small-middle scale projects effectively and to efficiently determine requisitions for packages for mechanical components and / or equipment, execute, deliver the packages on time in compliance with company specifications, procedures and to independently deal with all stakeholders and resolve all issues of the assigned packages, and provide guidance to the assigned team

Responsibilities:

• Conversant with specifications and requirements for mechanical rotating equipment (such as Process gas Compressors, Screw compressor packages, Reciprocating compressors, Gas Turbines, Sea Water Injection Pumps, etc.,) and requirements of Industry Codes and Standards, Classification Society rules and all relevant Regulatory.
• Responsible for the design and selection of rotating equipment on EPC projects through the various engineering work phases (i.e. Feasibility / FEED studies, and detailed engineering for Offshore, FPSO Projects)
• Plans and directs technical specifications/standards and Requisitions for engineers. Ensures all technical requirements incorporated in engineering deliverables. Reviews them and validates with the Section head, Project Management Team and client.
• Independently evaluates the technical aspects of bids received from suppliers and concludes technical assessment. Generally, Lead Engineers are assigned with complex packages and / or high-risk equipment.
• Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakes holders.
• Oversees the technical and administrative management of the project mechanical team and ensures quality/schedule of deliverables from the team.
• Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site.
• Independently resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post-delivery.
• Ensures business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements:

• Bachelor Degree in Engineering
• Minimum 15 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in FPSO, off-shore application
• Possess relevant experience working on EPC projects
• Shall be conversant with design standards and International Industry Codes such as ASME, API, etc.

R1552011

Peak Ocean EA License No. 18C9336

Job Description:

• Conduct equipment design & development work according to customers and internal specifications.
• Act as project lead to plan, organize and co-ordinate their respective project’s meetings to review design and ensure projects are kept to schedule.
• Maintain and control relevant documents related to R & D activities per requirements.
• Maintain, keep track and ensure Billed Materials is updated.
• Generate detailed 2D/3D drawings.
• Raise ECN for update of changes to design and drawings and follow up on approval and ECN flow.
• Provide technical support to process & production, supply chain & QA for review and trouble-shooting of design and drawings.

Requirements:

• Bachelor’s degree or master’s degree in mechanical engineering or relevant disciplines.
• At least a minimum 4 years of relevant experience in semiconductor or automation equipment design. Candidate with more years of relevant experience would be considered for Senior position.
• Proficient in Microsoft Office applications (Words, Excel, Powerpoint) are required.
• Strong understanding of mechanical engineering principles and engineering techniques are required.
• Plentiful experience of mechanical designs using Solidworks is preferred. Candidate with Autodesk/Auto CAD Software will be an advantage.
• Solid knowledge and experience in material properties are required for Senior position.
• Good communication, time management, problem-solving and decision-making skills are required for Senior position.
• Willing to travel for overseas projects if required.
• Basic salary commensurate with experience.

We regret to inform that only shortlisted candidate(s) will be notified.

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Mechanical Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Mechanical Design Engineer

Responsibilities:

Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers. Main duties involve

• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Requirements:

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:

1. Ultra High Precision machine design
2. High Speed Pick and Place mechanism design
3. Structural, kinematics and dynamic analysis and FEA simulation
4. Geometrical tolerance and dimensional analysis (e.g. stack up error)
5. Engineering material selection
6. Design troubleshooting
7. Application of analysis tools like FMEA, DOE

· Ensure thorough understanding of project terms and requirements.

· Review detailed drawings, and provide technical advice on practical design and construction.

· Prepare, schedule, coordinate and monitor the assigned projects.

· Prepare, update and maintain document summary or the necessary documents for projects.

· Prepare and submit the required engineering reports, documents, and drawings to the relevant authorities for approval.

· Update, manage and compile schedules of assigned projects with accurate data and report to the manager.

· Interact with clients to interpret their needs and requirements.

· Cooperate and communicate effectively with the project participants to provide assistance and support, to meet delivery timeline, optimize cost efficiency and meet customer specification.

· Feedback on workflow issues to manager in order to enhance efficiency and productivity.

· Manage all expected / unexpected change orders or deviations during project execution.

· Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

· Any other job as assigned by the Management from time to time.

Are you a Mechanical Engineer with expertise seeking to make a valuable contribution to the success of a product?

Super Tomato is a company that offers a comprehensive range of automation services, including design, fabrication, and assembly, for our corporate clients. Our expertise lies in automation and robotics.

We are currently looking for a motivated and competent Mechanical Engineer to design our upcoming product.

As a Mechanical Design Engineer at Super Tomato, you will play a crucial role in designing our next product. You will be responsible for every stage of the process, from ideation and prototyping to design validation, manufacturing, and reliability testing.

Your task will be to solve a given problem statement and conduct research to 3D print, test, and eventually bring it for fabrication and final assembly.

Your experience with mechanisms will be critical as it is required in significant part of our projects.

This product will have a significant impact on the public, as it will be deployed in high-traffic areas. You will be able to build a robust portfolio and showcase your skills.

If you are shortlisted, we will invite you to our office for a physical viewing of the product.

Responsibilities

• Hands-on assembly
• Designing products from scratch
• Sizing of components
• Communicating effectively with the vendor
• Conduct thorough testing of designs
• Cost-down

Qualifications

Having prior experience in designing mechanisms is highly desirable for this position. In addition, if you possess experience working with systems that are involved in food handling, that would be a great advantage.

- Provide top-tier technical support and quality information to car manufacturers, distributors, and Service Dealers (SD) to drive continuous product quality improvement.
- Support the establishment and management of SD network expansion in responsible territories, ensuring a seamless service experience for our customers.
- Conduct engaging onsite and virtual technical training and audits to SD, guaranteeing that repair capabilities meet and exceed company standards.
- Maintain and ensure the operational readiness of all repair equipment and diagnostic tools, enabling efficient service delivery.
- Offer ad-hoc support to automotive sales and related departments, contributing to the overall success of our automotive business.

Roles & Responsibilities

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Procurement of materials and consumables required to carry out the fabrication work
• Work closely with clients during project execution with regards to schedule, determination of hold points (for testing and inspection) and project close up
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Carry out daily meeting with the supervisors to plan, prioritize, review and update status of projects
• Prepare Risk Assessment for Clients review and approval prior to work start
• Update project status during the project weekly meeting
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure D.Os, Job Completion forms and invoices are in place (signed, submitted and filed promptly) within 1 week of project close up
• Maintain accountability to the individual client site based on sales records, quality control and safety records
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Carry out at least one Monthly safety Audit using the Audit Checklist
• Attend and participate all Safety Meetings organized by Clients

As a Senior Quality Engineer – Mechanical Parts & Complex Assemblies at MKS Instruments Manufacturing operation located in Kaki-Bukit, Singapore you will be responsible for leading the quality assurance of mechanical components and complex mechanical assemblies used in our laser-based systems. This role involves developing and executing inspection and testing protocols, managing inspection systems, and performing failure analysis activities. The ideal candidate will possess a strong background in dimensional inspection, troubleshooting complex mechanical parts and assemblies, and extensive ISO-9001 quality systems expertise. This role involves ensuring product quality, resolving issues related to mechanical components & sub-systems and driving continuous improvement initiatives.

Key Responsibilities:

Quality Assurance & Inspection:

• Develop detailed dimensional inspection plans for mechanical components and assemblies using tools such as CMM, and optical comparators.
• Develop and maintain inspection protocols and test plans for mechanical parts and assemblies.
• Interpret technical drawings, GD&T (Geometric Dimensioning and Tolerancing) and engineering specifications to ensure compliance.
• Failure analysis & Troubleshooting: Investigate failures in mechanical parts and assemblies, identifying root cause using techniques such as metallurgical analysis, fractural analysis and FMEA.
• Utilize statistical methods to define appropriate sample sizes based on part criticality, lot size and supplier performance.
• Validate cleaning processes for incoming parts and verify their compliance with cleanliness requirements.
• Conduct first article inspections (FAI) for new parts to validate conformance to design specifications.

Quality Management System (QMS):

• Implement and maintain QMS processes in compliance with ISO 9001 and other relevant standards.
• Support internal and external audits, including preparation, execution, and follow up actions.

Supplier Quality Improvements:

• Evaluate and qualify suppliers for mechanical components, ensuring adherence to quality standards and specifications.
• Collaborate with supplier to investigate and resolve non-conformances and drive quality improvement.

Data Analysis & Reporting

• Analyze quality data to identify trends, drive decision-making, and recommend process improvements.
• Create reports and dashboards to communicate quality performance metrics to stakeholders.

Continuous Improvement:

• Lead initiatives to improve product quality and manufacturing processes.
• Provide recommendations for process improvements based on data analysis and best practices.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost effectiveness.

Requirements:

• Bachelor’s/Master’s degree in Mechanical Engineering, Quality Engineering, or a related field.
• 5+ years of experience in mechanical parts inspection, quality engineering, failure analysis, preferably in laser, systems, or manufacturing environments.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Strong background in mechanical parts inspection, including dimensional inspection tools & GD&T.
• Proficiency in CAD software for drawing interpretation (e.g Solidworks, Autocad).
• Experience with Quality Software such as Minitab, SPC tools, SAP ERP & Agile PLM.
• Experience in failure analysis techniques, Optical Microscopy, Stereo Microscopy, Material property analysis, Surface roughness measurements etc.
• Strong knowledge of QMS and ISO 9001 standards.
• Experience with supplier audits and managing vendor relationships.
• Familiarity with fabrication and cleaning processes for mechanical parts.
• Excellent problem solving, analytical, and communication skills.
• Experience with lean manufacturing and continuous improvement methodologies.
• Hands on experience with laser or systems manufacturing is a plus.

Responsibilities

· Assist, plan and execute or draft Mechanical / Electrical / Fire / Plumbing & Sanitary (MEPL) project in compliance with safety, quality, and schedule

· Create process flow diagrams, general arrangement drawings, piping & instrumentation diagrams, and isometrics.

· Draft and prepare Shop drawing / as-built drawing of the given MEPL service with (CAD) software.

· Ensure all drawings are in accordance with the standards set by company’s quality.

· Perform file management on a regular basis.

· Participate in continual quality check and improvement of work activities.

· Complies with company safety regulations and ethics.

· Ability to work under pressure.

· Assist to propose value engineering methods with the clients to interpret their requirements and represent them in the field.

· Provide technical submission of proposal / drawings / MOS / RA etc

· Able to travel for site survey/study to better understand conditions/limitations onsite and attend site meetings and necessary site walk

· Cooperate and communicate effectively with internal and external stake holder.

· Review engineering deliverable and initiate appropriate corrective actions

· Any other duties as assigned and comply to ISO / OSHA standards

Requirements:

· 2-3 Year(s) of working experience in managing Additional and Alteration services in Commercial / Industrial / Plants sectors MEPL services

· Candidate must possess at least Bachelor's Degree/ Diploma in Engineering or drafter / mechanical experience.

· Proficient in Good software usage in Autocad / Solidwork / Revit / BIM etc software.

· Able to work independently and yet a team player with leadership.

· Ability to handle multiple projects and task with a high attention to detail.

· Pleasant, mature, meticulous with good interpersonal skills.

· Proficient in MS Excels/words/PowerPoint/Project.

· Preferred skill sets: good leadership skill, self-Driven, resourceful, problem-solving nature, strong business acumen, project management and good conversational/writing skills in English

As a key member of the mechanical engineering team, you will work on cross-functional team projects to develop and deliver new and innovative technical solutions for a robotic surgical system. Specifically, you will provide mechanical and mechanism engineering expertise in the R&D of surgical instruments. You will be working on designing mechanisms, structures and integrating actuators, motion components, and sensors to achieve innovative product functionalities.

The challenge for you is to successfully design and develop the surgical instrument in collaboration with other engineering teams, to achieve an efficient operation, reliable and safe product for clinical applications.

Requirements

· Bachelor or Master in Mechanical engineering.

· 5 - 8 years’ experience in the design & development of surgical instrument.

· Experience at least one cycle of product development.

· Able to communicate and write documents in Chinese (preferred).

· Familiar with regulatory and compliance requirements for the development of medical product.

· Strong technical capability in mechanism design and fabrication of precision and micro instruments.

· Strong technical capability to understand designs for mechanical structure and electro-mechanical assemblies.

· Good knowledge of various materials (metal and plastic), coating and manufacturing processes for precision parts.

· Proficient in 3D CAD modelling and simulation software like SolidWorks.

· Good knowledge and experience in GD&T, tolerance stack-up analysis.

· Good knowledge and experience in performing FEA and motion analysis and technical review of mechanism design.

· Able to travel on short notice for short period.

Desirable Traits/Personality

· An analytical problem solver to identify root causes, devise/evaluate/recommend optimal solutions to prevent future issues.

· Strong interests in surgical robotic system and instruments for medical application.

· Able to communicate technical information and build interpersonal relationships with the team members.

· Able to work independently and driven to achieve high standards.

· Intellectual curiosity about new technologies and innovations.

· Creative with critical thinking ability.

· Last but not least, a fun person to work with.

Responsibilities

· Work with cross-functional teams on detailed mechanical design at system level, sub-systems, modules, and components level.

· Support and review critical technical development related to precision mechanical instruments.

· Resolve issues and improve product reliability.

· Ensure the design and functionalities meet user needs, able to meet cost target and quality specifications.

· Perform analytical studies, risk assessment, mechanical verification, and validation.

· Co-ordinate design and fabrication activities locally or with overseas partners.

· As a mentor to junior engineers and enhance their knowledge and skills.

Ensure proper documentation (Design History File) for mechanical design.

1) Qualifications

Degree in Mechanical Engineering recognized by PEB Singapore.

3 to 5 years of working experience in the consultancy firm and design of ACMV, Fire, and Hydraulic services. Working experience gathered as a contractor in project execution will be considered.

Experience on Energy Storage System (ESS) will be an advantage.

Capability in carbon, sustainability, green mark certification, resources conservation, renewables, etc. will be an added advantage.

Fresh graduates will be considered as well.
2) Business Development

Begin to build relationships with clients, consultants, contractors from other organizations.

3) Project Role

Carry out duties in accordance with company procedures and implement prescribed systems of work.

4) Engineering Function

Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders.

Responsible for the development and production of drawings/calculations/specifications/reports.

Carry out investigative and technical review works.

Perform engineering calculations with the aid of engineering software such as IESVE, Computational Fluid Dynamics (CFD), Full Hydraulic Calculation (FHC).

Be familiar with Architect, Structural/Service Engineers drawings/specifications etc.

5) Behavioral

Carry out tasks and duties assigned in a positive and dignified manner.

Enjoy serving our Clients with teamwork, constantly developing self and others.

Set an example for placement students and younger engineers.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781