• Ensure that the construction works are done according to drawings and within specified requirements.
• Check thoroughly drawings and instructions received and also highlight their discrepancies and work changes to the Project Manager.
• Prepares and submits method statements and alternative proposals as and when required.
• Liaise closely with the client’s representative and other work changes.
• Prepares site records of variation work and other work changes
• Liaise with sub-contractors/suppliers of different trades pertaining to sub-contract activities to be executed on-site
• Report any problems, discrepancies or changes that affect the quality of the works.
• Assist to enforce the Quality Management System on-site, including safety management.
• Assist to ensure that all construction activities comply with the Authority.
• Collate information from Supervisor/Foremen of the different trades to compile and prepare the Site Daily Report including the progress report.
• Assist the Quality Surveyor in preparing the monthly progress claims, VO claims and verifies suppliers and sub-contractors claims.
• Candidates with sound knowledge of Plumbing & Sanitary.
• More than 6 years experience in Singapore

Responsibilities:

Plan, design and administer contract/project of mechanical and electrical engineering works for building service including

• Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Minimum 3 years of relevant experience. Fresh Graduates are welcomed.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Requirements

• Bachelor Degree in Mechanical Engineering
• At least 7 years of design experience in an engineering consultancy firm
• Must have design experience in hospital, residential, commercial or mixed development projects
• Familiar with any or more of the following services: ACMV/FIRE PROTECTION/ HYDRAULIC /PLUMBING AND SANITARY for large scale building projects
• Registered PE will be favourably considered

Responsibilities

• Set design criteria, check design calculation and drawings
• Produce sketch drawings
• Assist in fee proposals
• Ensure documentation complies with Design Criteria / Client Brief / Approved Concept / Standards
• Attend design, clients, architects and site meetings
• Resolve technical problems during the project design and construction stages
• Lead projects and supervise a team of engineers
• Assist the Team Leader and Job Captain in the performance of their duties

Job Description:

• Coordinate and supervise the work schedule of SWC, sub-contractors and work closely with site operations staff to ensure project completion timely within scheduled, cost and quality
• Prepare method statements and identify drawing discrepancies
• Prepare and submit material submissions and sample submissions
• Communicate effectively with clients, consultants, sub-contractors, project team and other stakeholders on project progress
• Provide technical advice to resolve M&E related technical issues
• Conduct inspections to ensure work are carried out according to contract specification, codes of practices and safety regulations
• To coordinate with SWC for the related to structure and civil work.
• Carry out the inspection with RTO/RE as per specifications and approved drawing.

Job Requirements:

• Possess Diploma/Degree in Electrical/Mechanical or equivalent professional qualification
• Minimum 5 years’ experience and at least 1 LTA MRT underground projects in related fields for construction supervision of similar scale and complexity.
• Proficiency in BIM software and AUTOCAD will be advantageous
• Good interpersonal and communication skills
• Capable of leading CSD/SEM coordination, design interface, coordination for construction of transit project, chair and lead coordination meeting.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Mechanical Engineer

Our client is a MNC chemical manufacturer company. They are currently seeking for Mechanical Engineer to improve the production technology of the site.

The role of the Mechanical Engineer includes:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance [preventive, corrective, & breakdown maintenance], transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance.
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

Job Requirement:

• Degree in Bachelor of Mechanical Engineering.
• Familiar with Static and Rotating equipment.
• Minimum 3 years of experience in Chemical Process Plant.

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to improper submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

Mechanical Engineer
Job Description

• Design mechanical and electro-mechanical components.
• Integrate mechanical and electro-mechanical components into subsystems and assemblies.
• Perform system packaging and high-level assembly modeling.
• Perform interference analysis, design, and review designs per safety codes.
• Analyse and respond to issues found at supplier or manufacturing sites during manufacturing assembly, integration, and test.
• Develop or modify parametric 3D models and 2D drawings of designs including any mechanical routings as required.
• Perform geometric dimensioning and tolerance with capabilities at a level1 certification level.
• Release drawings and modify drawings using CAD tools.
• Responsible for overseeing the design, development and implementation of manufacturing processes for contact manufacturers.
• Collaborate with cross-functional teams to ensure fabrication, assembly and testing meets quality standards, time lines and cost-effectiveness.
• Maintain accurate documentation records for manufacturing BOM, drawings revisions and procedures.
• Collaborate with product designers to ensure BOM and product drawings can be transferred to procurement and manufacturing efficiently and with high quality.
• Conduct feasibility studies and risk assessments for new manufacturing processes.
• Ensure product quality by implementing quality control measures and inspection procedures.
• Identify and resolve manufacturing issues in collaboration with contract manufacturers, ensuring minimal disruption to production"

SKILL REQUIREMENTS

• Strong understanding of manufacturing processes, quality control methodologies and lean manufacturing principles.
• Proficiency in CAD software and other engineering tools.
• Excellent problem-solving skills and the ability to work under pressure.
• Strong communication and interpersonal skills to collaborate effectively with diverse teams.

BASIC EDUCATIONAL REQUIREMENT

Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or a related field.
Freshie are welcomed to apply

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Job Scope:

The person will oversee the site work scope including supporting Mechanical and electrical, ensuring compliance with building regulations and specifications; and managing other resources.

The person will be working with site personnel, and site activities and be highly involved in the following aspects of the business but not limited to the below:

· Project management, site meetings, and coordination with any QA/QC mechanical or electrical works

· Technical study and identify variation works.

· Able to schedule, supervise, and control sub-contractors to carry out their work accurately and timely in accordance with the contract, and QA/QC specifications.

· Experience in study drawings, and preparing work permits/documentation.

· Undertake Adhoc duties as assigned.

Job Requirements:

· Good knowledge of various types of M&E systems with piping and cables used in factories, especially in Semiconductor factories.

· Experience in the Semiconductor industry, design/knowledge of general construction M&E works, is an advantage

· Independent individual with a drive to make things work.

· Highly communicative and Self-motivated individual

· Ability to communicate in English and work with tight deadlines.

· Able to communicate in Chinese is an advantage

· Possess relevant safety and work certificates (BCSS, WAH) is an advantage

· Applicants preferred to be in Singapore

Description:-

• Report to R&D Manager
• Design and prepare manufacturing drawings of electrical switchboards
• Assemble modular drawings base on the panel design
• Perform Weight, Heat loss calculations and Air Flow simulations as required
• Prepare Material Order List for Mechanical parts
• Liaise with vendors for Material enquires
• Work closely with Manufacturing & Production team
• Perform other duties as directed by supervisor

Requirements:-

• Minimum Diploma/Higher NITEC/NITEC in Mechanical Engineering
• Knowledge in BIM, VertexG4 and AutoCAD M&E 3D drawings
• Mechnical background with 2D and 3D drafting skills
• Able to read and interpret manufacturing blueprints and specifications, recognize and identify different types of materials/sheet metals used in switchboards
• Proficient in 3D software, flat pattern development, PC skills and able to learn new software applications quickly
• Attentive to details with capability of self-checking for accuracy

Responsibilities:

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• sponsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• · Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs

Requirements:

• Degree in Mechanical Engineering
• At least 8 years in mechanical maintenance
• Experience in power plant or related process plant experience
• Leadership experience will be a plus

Account Manager:

Kerwin Tan Kai Bin (R1331624)

[email protected]

EA16S8107

Our client is a leader in the Water Treatment industry in Singapore. Due to their current expansion plan, they are looking for a Mechanical Engineer to join their team, in hopes of developing the current high performing team. They are located in the East.

Responsibilities

• Review the process design provided by the proposal/sales team.
• Create detailed designs and P&IDs based on project requirements.
• Perform engineering calculations and equipment sizing.
• Ensure design compliance with customer specifications through thorough review.
• Prepare equipment datasheets (valve lists, equipment lists, piping schedules, instrument lists).
• Supervise and review complex 3D models of equipment skids for specification compliance.
• Oversee the creation of general arrangement, piping detail, and skid structure drawings.
• Work with EIA engineers to prepare project documentation and request price quotations from vendors.
• Assess vendor, fabricator, and subcontractor quotations for compliance.
• Review engineering deliverables from vendors and subcontractors to ensure specification adherence.
• Participate in design reviews, both internal and external.
• Support the testing and commissioning processes and prepare O&M manuals.
• Any ad-hoc duty as given

Requirement

• Min Degree in Environmental/Mechanical/Chemical Engineering;
• Min 4-year of experience in wastewater treatment or related field
• Experience in the oil and gas industry will be advantage
• Knowledge in designing of complex industrial water treatment systems
• Experience working on multiple projects will be added advantage

Proficiency using Microsoft Office and Microsoft Project, good report writing skills

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Responsibilities:

• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Define test requirements needed for all the designed products
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Bachelor’s degree in mechanical / industrial engineering with 2-3 years of relevant experience
• Good exposure in Plastic Injection molding parts design
• Knowledge of product design, engineering plastics behaviour, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem-solving skills with strong technical acumen

Interested candidates may send their CV to Caris (Reg No. R1109826) at [email protected] quoting the job title in the Subject line. We regret that only shortlisted candidates will be notified.

1) Qualifications

Degree in Mechanical Engineering recognized by PEB Singapore.

3 to 5 years of working experience in the consultancy firm and design of ACMV, Fire, and Hydraulic services. Working experience gathered as a contractor in project execution will be considered.

Experience on Energy Storage System (ESS) will be an advantage.

Capability in carbon, sustainability, green mark certification, resources conservation, renewables, etc. will be an added advantage.

Fresh graduates will be considered as well.
2) Business Development

Begin to build relationships with clients, consultants, contractors from other organizations.

3) Project Role

Carry out duties in accordance with company procedures and implement prescribed systems of work.

4) Engineering Function

Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders.

Responsible for the development and production of drawings/calculations/specifications/reports.

Carry out investigative and technical review works.

Perform engineering calculations with the aid of engineering software such as IESVE, Computational Fluid Dynamics (CFD), Full Hydraulic Calculation (FHC).

Be familiar with Architect, Structural/Service Engineers drawings/specifications etc.

5) Behavioral

Carry out tasks and duties assigned in a positive and dignified manner.

Enjoy serving our Clients with teamwork, constantly developing self and others.

Set an example for placement students and younger engineers.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

MAIN DUTIES AND RESPONSIBILITIES:

Design and develop high-precision semiconductor equipment to meet the processing and automation needs of customers. To succeed in this position, you need to:

· Understand the design specification given to you by the design lead.

· Understand the company’s design standards and best practices.

· Understand the constraints within which your design must work.

· Understand geometric tolerances and dimensional analyses.

· Choose components based on an understanding of function, reliability, and costs.

· Choose materials based on an understanding of materials science and engineering.

· Understand design for manufacturability/assembly.

· Work with the Electrical Engineer to choose drives and electrical components (if any).

· Discuss with the Software Engineer on any interlocking logic requirements.

· Lay the design concept down in the 3D CAD.

· Perform DFMEA during the design process.

· Submit the CAD module to the system integrator to check for interface issues.

· Review the design with the design lead.

· Put the part designs down on drawings, carefully specifying tolerances and specifications.

· Build the module BOM.

· Procure the module components.

· Review the assembly of the physical module.

· Perform design improvements where appropriate.

EDUCATION AND EXPERIENCE

· BE/BS Mechanical Engineering.

· 0-3 years experience in designing and developing automated equipment.

· 3D solid modeling, preferably Creo (others like Solidworks, NX are also acceptable).

· Electro-mechanical module conceptualization and design.

· Pneumatic/fluid circuit design.

· Detail fabrication drawings, assembly drawings and layout drawings.

· Selection and sizing of standard components available off the shelf.

Preferred experience

· Ultra high-precision machine design.

· High-speed pick and place mechanism design.

· Structural, kinematics and dynamic analyses and FEA simulations.

· Geometrical tolerancing and dimensional analyses.

· Engineering material selection.

· Manufacturing process selection.

· Application of analysis tools like FMEA, DOE.

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541