The Mechanical Technician performs mechanical completion, pre-commissioning and
commissioning activities.

In order to complete Mechanical Completion, Pre-commissioning and Commissioning activities in accordance with the project completion plan and schedule, he should:

• Understand his roles and responsibilities and to be compliant with.
• Understand the project completion execution plan from the Discipline Lead Technician.
• Understand Notification of Energization (NOE) Flow Chart.
• Understand System Drawings and Walk Down procedure;
• Complete a Daily Report to ensure clear visibility to the Discipline Lead Technician.
• Attend the Daily Discipline Tool Box Talk to understand the daily activities;
• Perform the Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team in compliance with the project drawings and specifications.
• Perform the Pre-commissioning Activities (‘B’ Scope ITRs) in compliance with the vendor
  documentations and specifications.
• Support the Operation Test Procedure (OTP) under the supervision of the discipline Lead
  Technician.
• Utilize specific tools and test equipment for the system commissioning in safety and with
  quality.
• Assist field service vendor to conduct the system commissioning
• Comply with the HSSE requirements of the site. Ensure the safety and security of project personnel.
• Assess job related hazards during the development of safe working procedures and pursue
  opportunities to eliminate exposure.
• Attend the specified HSSE training and ensure direct reports are trained.
• Know how HSSE risks are managed and ensure that the HSSE controls for the activities/tasks are communicated. Supervise the safe execution of work and the implementation of controls.
• Communicate and practice in emergency response.
• Engage with team members and contractor staff on HSSE in meetings, pre-job briefings, during toolbox talks and attend key HSSE events. Communicate a consistent safety message, resolve unsafe situations, engage and intervene on unsafe behaviour and reward good safety behaviour.
• Liaise with HSSE department for support.

Requirement:

• Technical College diploma in Mechanical discipline or equivalent
• A minimum of 4 years’ construction or commissioning experiences in Oil & Gas Industry;
  especially for Offshore products and systems.
• Preferably gained within FPSO experience will be a strong selection criteria.
• Completions Tools (ECOM) including documentations
• PTW and JSA

Brunel International S.E.A Pte. Ltd.
UEN No: 199603098R
EA License No: 16S8067
Reza Johannes - R1871121

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Mechanical Engineering Manager

Description

• Lead, coach and develop the engineering team
• Provide technical guidance and support in TCP/IP, USB, BLE, Modem, Wi-Fi and Serial communications experience and developed low powered embedded systems
• Good at Tolerance Analysis/FACA for camera module, Wi-Fi, Zigbee, and Bluetooth
• Hands-on skills of TCP/IP, USB, BLE, Modem, Wi-Fi and Serial communications experience and developed low powered embedded systems
• Continuously evaluate and improve engineering processes and workflows.
• Implement best practices, advanced manufacturing techniques and methodologies. Stay updated with the latest technologies and industry trends.
• Ensure compliance with medical device industry standards and regulations.
• Coordinate with other departments to align project goals and requirements.
• Manage resources and prioritizing tasks to meet project deadlines.
• Communicate effectively with stakeholders, clients, and team members.

Education

• Bachelor’s degree in mechanical engineering or equivalent.

Experience

• Minimum 10 years’ of relevant working experience out of which 5 years should be in a lead or Manager’s role.
• Good knowledge in milling tooling and machining process.
• Experienced in R&D experience is a must

Skills

• Strong experience working with machine vision, 2D/3D camera module, embedded Linux drivers, kernel builds, etc
• In-depth experience in Linux and embedded firmware development especially in networking, Wi-Fi / Zigbee / Bluetooth / KNX RF wireless, IoT or LED Lighting products
• 5+ years of experience working with machine vision, 2D/3D camera module, embedded Linux drivers, kernel builds, etc
• Leadership skill.
• Project Management skills.
• Listening and Communication skills.
• Problem-solving and decision-making skills.

Roles & Responsibilities

- Prepare drawing for submission to authorities using Autocad software

- Prepare documents for the submission of drawings to relevant authorities

- Going out to sites for checking and inspection

- Any other related work assigned by the Company

- Familiar with Autocad software/SOLID WORKS

- Do not mind travelling to sites

- With working experience prefered

- Able to work and communicate with people from many other countries

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure the timely completion of given tender assignment

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Able to work a under tight timeline
• Must be team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

• Maintenance and Troubleshooting: Perform routine maintenance and troubleshooting on electrical systems, equipment, and machinery to ensure optimal performance.
• Installation: Install, test, and commission electrical equipment and wiring as per the company’s standards and technical specifications.
• Electrical Repairs: Diagnose and repair faults in electrical systems, components, and circuits, using a variety of testing equipment.
• Safety Compliance: Ensure compliance with all electrical safety regulations, codes, and company safety protocols at all times.
• Preventative Maintenance: Implement and maintain a preventative maintenance schedule to minimize equipment downtime and extend the life of electrical systems.
• System Upgrades: Assist in the upgrading or replacement of obsolete electrical components and systems to improve efficiency and performance.
• Documentation: Maintain accurate records of inspections, repairs, and maintenance work done, as well as any changes to system designs or installations.
• Night Shift Coverage: Provide support during night shifts as needed, ensuring that electrical systems are operational during off-hours.
• Emergency Response: Be on-call to respond to emergency breakdowns or electrical faults during nights or weekends, ensuring minimal downtime.
• Team Collaboration: Work closely with engineers, maintenance teams, and other departments to identify and resolve electrical issues and ensure seamless operations.

机电经理（M&E Manager）

Job responsibilities（工作职责）：

(1) Lead and oversee all M&E engineering activities in construction projects, ensuring adherence to design specifications, approved drawings, and project timelines.

(2) Manage the planning, scheduling, coordination, and integration of M&E systems installation and commissioning.

(3) Supervise M&E subcontractors and vendors, ensuring quality work, safety, and compliance with contractual obligations.

(4) Monitor and track the progress of M&E works, providing regular updates to senior management and stakeholders.

(5) Coordinate with architects, engineers, project managers, and other departments to resolve technical issues, discrepancies, and ensure seamless integration of M&E systems with other building components.

(6) Ensure compliance with regulatory standards, building codes, and quality assurance requirements (e.g., CONQUAS, QM).

(7) Liaise with clients, consultants, relevant authorities, and subcontractors regarding M&E issues, ensuring effective communication and problem resolution.

(8) Ensure M&E works comply with Safe Work Procedures and safety regulations throughout the installation and commissioning process.

(9) Prepare and submit M&E-related documentation, reports, and progress updates as required by the project schedule.

(10) Handle any other ad-hoc duties or tasks as assigned by management.

Requirements（要求）：

(1) Degree in Mechanical & Electrical Engineering or related fields; PE Board recognized degree is preferred.

(2) Minimum 8 years of relevant experience in the construction industry, with strong M&E project management expertise and at least one completed project cycle.

(3) Possess Green Mark Accredited Professional (GMAP) certification is a plus.

(4) Experience with MOHH or HDB projects is a plus.

(5) Proficient in Autodesk Revit, BIM software, or other M&E design tools.

(6) Strong leadership, organizational, and project management skills, with the ability to supervise teams and manage multiple tasks effectively.

(7) In-depth knowledge of M&E systems, installation methods, and industry standards.

(8) Good speaking and writing in both English and Chinese.

(9) With a actual experience of large-scale public building renovation and good relationship with the authorities will be preferred.

Responsibilities:

• Carrying out all routine and defect-based maintenance duties in accordance with maintenance plans
• Assisting with the monitoring of contractors involved in maintenance on site
• Contributing to the development of asset maintenance plans
• To properly document the maintenance jobs done.
• To ensure compliance of regulatory requirements, code of practices as applicable to the workplace
• To identify, plan and initiate action to procure and maintain spares required for the reliability and availability of the assets within the allotted budget.
• Support the operation of plant as required in a safe, efficient and timely manner in accordance with operational guidelines and to meet output requirements
• Responsible for ensuring that assets are operated and maintained to meet performance requirements and providing support for Operations and Maintenance.
• Assist in ensuring that the following maintenance guidelines are followed.

Requirements:

• Diploma in Mechanical Engineering, or equivalent qualifications
• At least 3 years of relevant experience in Power Plants or related industries
• Candidates should ideally have good knowledge of plant processes and operations, with relevant experience in Power Plants or related industries
• Self-motivated, independent, and possess sound analytical and communication skills, and is a team player.
• A team player who can collaborate effectively with cross-functional teams.
• Ability to work under pressure and meet tight deadlines.
• Hands-on experience in the maintenance, troubleshooting, and repair of rotating equipment (e.g., pumps, compressors, fans, blowers, gearboxes). Experience in the inspection, maintenance, and repair of static equipment such as heat exchangers, boilers, pressure vessels, storage tanks, and piping systems .
• Ability to perform gasket replacements, flange management, and bolt torquing to ensure leak-free joints
• Knowledge on Gas/Steam turbines, HRSG, water treatment plant equipment will be an added advantage .
• Familiarity with Condition Monitoring techniques and Predictive Maintenance tools
• Basic understanding of Electrical and Instrumentation (E&I) interfaces with mechanical systems.

Others:

• Working location in Jurong Island
• Scheduled company transport is provided, to/from Jurong East MRT

Interested applicants, please forward your detailed resume including your last drawn salary, expected salary and date of availability to:

[email protected]

Please indicate the position that you are applying on the subject.

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates will be notified)

By submitting your personal data and/or resume to PacificLight (“us”) or to [email protected], you shall be deemed to have given consent to us collecting, using, and disclosing your personal data for the purpose of assessing your job application. Information collected may also be disclosed to PacificLight Group of Companies (“PacificLight”) which includes PacificLight Power Pte. Ltd and PacificLight Energy Pte. Ltd. for this purpose. Please read our privacy policy here.

Job scope:

• Dealing with all related stakeholders for the M&E projects
• Understanding market price trends
• Capable of administrate on ACMV/Electrical tender and tendering procedures
• Controlling, planning for strategy of all tendering duties
• List the scope of work and commercial requirements in order to determine the risks of the projects
• Preparing and follow up on the Request For Quotations to suppliers/sub-cons in order to ensure tender costing and technical data to be submitted on time
• Taking off Bill of Quantities from the ACMV Drawings, Points of Schedules and
• Architectural drawings
• Collating price comparison, costing summary and technical proposal in order to prepare tender submission
• Studying the addendum and/or corrigendum documents and update costing summary with technical proposal accordingly
• Diploma/Degree in any engineering related field
• Quantity surveyor experience from M&E construction field
• Salary up to $5000

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Responsibilities:

• To keep track of all tender documents, drawings and corrigendum base on the document control process
• To verify tender drawings/details and prepare tender enquiry
• To assist in quotations, selection of qualified subcontractors/vendors and distribution of relevant tender documents
• Perform quantity take-off for tender projects based on timeline
• Assist with tender evaluation and preparation of tender documents for submission
• Ensure all documentary evidences and contemporary records are documented, filed and complied for substantiation purposes
• Able to read M&E drawings
• Site verifications of variations and taking records for submissions of claims
• Assist project manager/designated staff to evaluate and certify completed work
• Assist in verifying sub-contractor’s claims
• Monitor and report on balance amount

Requirements:

• Candidate must possess at least a Diploma/Advanced/higher/Graduate Diploma in Quantity Survey or Mechanical Engineering or equivalent
• Minimum 3 years QS experiences
• Knowledge & experience in M&E system requirements
• Able to work under pressure and meet tight deadline
• Able to work independently with minimum supervision
• Good knowledge and skill set in Microsoft Office
• Fast learner and willingness to explore new skill sets/technologies

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Abie to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

• Main Contractor
• 5 Days | West
• Candidates handling Mechanical QS duties is highly preferred

Our Client is a leading Civil Contractor that provides engineering & construction for Civil & Infrastructure projects. With increasing projects in the pipeline locally & overseas, they are seeking experienced and professional individuals to join their local team.

Responsibilities

• Manage contract and subcontract administration, including preparing progress claims, handling variation orders, and verifying claims from subcontractors and suppliers

Requirements

• Diploma or Degree in Quantity Surveying or Mechanical Engineering, with at least 5 years of experience as an M&E Quantity Surveyor.
• Strong technical expertise in measurement, cost estimation, construction technology, contracts, and legal aspects.
• Proficient in professional practice and contract administration processes.
• Capable of independently managing QS functions within a project and demonstrating strong teamwork skills.
  

OTHER INFORMATION:
• Location : West
• Working days : 5 Days
• Salary : up to S$6,500 / Negotiable + VB (salary will commensurate according to experience & qualifications).

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) by clicking the ‘Apply link’ /

or call 6590 9958 for a confidential discussion.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at

https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resume provided to us does not contain your full NRIC number and full home address during your job application.

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

They are seeking an experienced Mechanical Maintenance Team Lead to join their team. As a key member of the maintenance team, you will be responsible for ensuring the effective maintenance of plant and equipment to achieve high reliability and availability. You will lead a team of maintenance professionals, coordinate maintenance programs, and optimize planned maintenance activities. Additionally, you will troubleshoot faults, perform failure analysis, and implement plant improvement projects to enhance overall plant performance.

Below are some of the key responsibilities for the role;

• Lead and manage a team of maintenance professionals to ensure effective maintenance of plant and equipment
• Coordinate and optimize planned maintenance activities, including scheduled plant inspections and maintenance programs
• Ensure compliance with statutory, regulatory, and safety requirements
• Troubleshoot faults, perform failure analysis, and recommend corrective actions
• Implement plant improvement projects to enhance plant reliability, availability, and performance
• Supervise maintenance contract works and prepare technical specifications for equipment parts and services
• Manage procurement and track expenditure against approved department budget
• Develop and maintain a safety mindset and display good workplace safety behaviour

What you'll need to succeed

The successful candidate, should have;

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries
• Sound Mechanical engineering maintenance knowledge
• Good knowledge of safety and statutory requirements
• Self-motivated team player with analytical mind, strong planning, and problem-solving skills
• Ability to work effectively in a team and lead day-to-day activities
• Willingness to be part of the CERT team and participate in emergency responses as required

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Responsibilities:

• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• To formulate plans, check progress and control quality.
• To check Ship design drawings and technical specifications
• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Able to prepare progress reports and reports to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Minimum 12 years of ship maintenance management experience with a degree in Mechanical Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Proven track record in the ship of maintenance management

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Experience in large size of dredging & reclamation project sites over SGD 500M
• Experience in design, calculation, planning and modification of ships and ships equipment.

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Good knowledge of marine engineering and structural mechanics
• Experience in planning large-size crane equipment.
• Good knowledge of the ClassNK survey
• Well-versed in ship maintenance requirements
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting / finding the root cause.

• Possess a recognized degree/diploma in Mechanical/Electrical Engineering with at least five years of relevant experience in building projects.
• Provide technical and engineering support to the Project Team.
• Good knowledge of applicable codes/regulations and Authorities’ requirements relating to M&E services, building construction and safety.
• Provide the M&E schedule to tie with the Master Schedule.
• Supervise and coordinate all M&E works.
• Coordinate for RI(M&E) Inspection and TOP.
• Liaise with consultants, NSCs, DSCs and authorities on M&E matters.
• Ensure safe work procedures are implemented to control risks.
• Produce the coordinated services drawings (CSD).

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

Role Responsibilities

• Responsible for the running of small projects. Researches, develops, designs and assumes responsibility for coordination and monitoring of engineering project services for Mechanical installations, systems, equipment, facilities etc.
• Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes
• Surveys tests and reports on existing mechanical installations
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Represents Company at technical meetings with customers, professional teams and contractors teams
• Preparation of specification modifications (word or excel)
• Ensure engineering calculations and drawings meet required robust industry and legal standards
• According to the seniority, responsible for validation of Intermediate & Graduate Engineer input into designs

• Licensed or degree qualified or equivalent experience and have sufficient experience with international Consulting Engineering.
• Working towards or have achieved MCIBSE/MIEE/Professional/Chartered Engineer or equivalent status
• Experience of specification design/drawing for at least one building type
• Sound knowledge of key Health and Safety issues and legislation
• Knowledge of MS Office apple excel etc
• Ability to use IT based calculation and spreadsheet software
• Good understanding of BS SC standards and international design codes and standards
• Ability to prioritise own workload
• Ability to work to deadlines
• Act in an ethical manner and follows the principles of the Ethics Charter and Ethics in Practice Guidelines
• Background in consulting or construction preferred.
• Good understanding of international working and business operations of a global consultancy.
• Act in an ethical manner and follow the principles of the Ethics Charter and Ethics in Practice Guidelines of the Group

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

· Responsible for ensuring that assigned projects meet customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practiced and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 2 years of working experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.