1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

Benefits:

• Basic Salary up to $3,900 with yearly increment based on performance.
• 5 days (Monday to Friday) | 8.15am to 6pm
• Our company emphasises on good career progression.

Job Description:

This is a full time role for a Mechanical Engineer located in Sin Ming Ln. Our clients are doing Engine Servicing, Alternator Servicing, Control Panel Supply and Installation. You will be responsible for repairing and servicing various equipment and engines (Cummins, Volvo, Perkins, Man, Caterpillar, and Deutz) as scheduled by the Service Manager. The individual will troubleshoot and diagnose electrical and electronic circuits, including generators and control panels, and identify necessary parts for quotations. Testing and commissioning of engines and generators are also required. They should be able to read electrical and electronic drawings and conduct equipment surveys to determine the scope of repairs or services needed. Additionally, the role involves troubleshooting and repairing engine wiring harnesses and alternator wirings, constructing or modifying control panels (AC/DC) for engines and generators, and maintaining machinery, tools, and the service area.

Qualifications:

• 1 year relevant experience

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Mechanical Engineer (Assembly)
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assemble, debug, and test-run customized modular machines.
• Handle the commissioning of these machines.
• Provide technical support at customer locations to ensure proper equipment operation.
• Implement design improvements to simplify designs, reduce parts, and use cost-effective alternatives, while maintaining or enhancing product performance.
• Procure or assist in procuring necessary items to perform the above duties effectively.
• Write and maintain all required documentation, including work and assembly instructions, as well as manufacturing and test procedures.

APPLY NOW!!!

• Nitec, Higher Nitec, or Diploma in Mechanical Engineering with 2 to 3 years of relevant industry experience.
• Knowledge of industrial automation, jigs, fixture design, FMEA, SPC, and CAD as well as experience in machine design are added advantages.
• Ability to work independently with minimal supervision.
• Willingness to travel as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67302 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Field Service Engineer

5 Days (Mon-Fri)
830am-5pm
$2,800-$3,800 + $120 Transport Allowance
Sembawang

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Benefits:

• Basic Salary up to $3,900 with yearly increment based on performance.
• 5 days (Monday to Friday) | 8.15am to 6pm
• Our company emphasises on good career progression.

Job Description:

This is a full time role for a Mechanical Engineer located in Sin Ming Ln. Our clients are doing Engine Servicing, Alternator Servicing, Control Panel Supply and Installation. You will be responsible for repairing and servicing various equipment and engines (Cummins, Volvo, Perkins, Man, Caterpillar, and Deutz) as scheduled by the Service Manager. The individual will troubleshoot and diagnose electrical and electronic circuits, including generators and control panels, and identify necessary parts for quotations. Testing and commissioning of engines and generators are also required. They should be able to read electrical and electronic drawings and conduct equipment surveys to determine the scope of repairs or services needed. Additionally, the role involves troubleshooting and repairing engine wiring harnesses and alternator wirings, constructing or modifying control panels (AC/DC) for engines and generators, and maintaining machinery, tools, and the service area.

Qualifications:

• 1 year relevant experience

Senior Mechanical Manager

Working Hours: 5days (Mon-Fri), 8 am to 4.30 pm.

Work location: Jurong Island (Transport provided at Jurong East)

Salary: $8,000 to $9,500

Responsibilities：

• Management of annual/specific Project and Maintenance activities/budgets (both Mechanical and E&I) throughout fiscal year to achieve department goals.
• Ensuring that the relevant maintenance strategies as well as industry best practices are applied to the activities for maintenance and modifications in the plant to achieve reliability and availability of plant equipment of the highest level.
• Ensures all plant and equipment is maintained to the highest level of safety for work to avoid lost time accidents, with immediate response and thorough investigations and corrective actions for all hazardous occurrences and accidents.
• Ensure all Mechanical and E&I maintenance activities are carried out in accordance with the Company’s HSEQ Standards, statutory requirements, Company Maintenance & Management System, and best industry maintenance practices.
• Ensuring that there are adequate procedures and systems put in place for maintenance activities conducted within the process plant.
• Oversee all facilities planning and operations/functions including the maintenance, modification control of equipment, space allocation, move and construction.
• Works with counterparts in parent and subsidiary companies on technology transfers to raise maintenance performance standards.
• Line management responsibility for Maintenance team members.
• Approval of all work requests for equipment maintenance and modifications related to improvements and safety of process and plant.
• Approval of requisition for new equipment and maintenance spares.
• Approval of Contractors’ daily timesheets.
• Approval of the daily maintenance activities and modifications in the plant.
• Approval of grade change maintenance activities, in consultation with production department
• Planning and managing the shutdown maintenance.
• Provide training needs of Maintenance team members to ensure that they have the necessary skills and competencies to carry out their work in an efficient manner.
• Assessment and review of in-house contractors’ performance and the contract.
• Undertakes special assignments or projects as directed by the Manufacturing Director

Requirements:

• Degree in related discipline.
• Experiences in the chemical industry Singapore as Manager or Assistant manager.
• Experiences and knowledge about maintenance of mechanical rotating equipment and static facilities.
• Experiences as E&I Process/Maintenance Engineer at chemical plant or manufacturing facility.
• Knowledge about and to be familiar with high voltage power supply/MCC, control panel and/or DCS design and system to manage establishment will be an advantage.

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Electrical Engineer (Marine offshore)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at City Hall, may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities
To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
To ensure that the related documentations are updated and ready for ISO audit.
To cooperate with the safety department and carry out the assigned duties within the safety framework.
Assist site management team in project Planning & coordination.
Plan and schedule work sequences for construction operation.
Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
To study tender / construction drawings, specifications, and contracts to understand project requirements.
Understanding of critical project criteria related to schedule & productivity.
Able to provide guidance to new staff / junior staff.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Assist in the day-to-day project management to ensure compliance to regulatory requirements.
• Planning, organizing, coordinating and communicating aspects of project work activities on site from conception to completion.
• Overall overseeing all activities on the project to ensure they are executed in accordance with contract documents, in compliance with system plans, and work procedures for the Project, and will culminate in a validatable facility.
• Coordination / schedule meetings on the daily progress of works on site.
• One of the primary contact throughout the project
• Ensuring that the project stays on schedule, meets safety objectives, and the design will result in a cost-effective facility.
• Evaluating proposals submitted by vendors for the package; followed by tender interviews / clarifications and evaluate re-submissions by vendors.
• Review documentations submitted by vendor and ensure that all comments are incorporated to meet the requirement / specification of the project.
• Review contractors design documentations and coordinate with related stakeholders on process related issues.
• Prevent compliance issues by collaborating with other project teams; reviewing design data; identifying and resolving engineering design issues; identifying short-term and long-range issues; researching and identifying applicable regulatory and industry compliance standards and codes; developing compliance policies.

Requirements

• Degree in Mechanical Engineering
• Assist the Project Manager to manage project multidiscipline teams,
• Minimum 10 years of project management in construction industry.
• PMP Certification would be an added advantage
• Willingness to work at Tuas area. Transportation is provided from nearest MRT station to site office

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• To involve in the planning and design of mechanical engineering works for building services.
• To prepare tender documents, design and technical specifications for tenders, as well as supervise the installation and commissioning of mechanical works.
• Able to liaise both end user customers and vendor and supplier for project coordination.
• Onsite support upon customer request if necessary to have first-hand look for project requirement.
• Responsible for all on-site technical and engineering matters
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems
• To read and draw technical drawing
• Well versed in Autocad
• Material Procurement
• Assist Manager in Project Integration

Strong analytical, Problem solving & Decision Making Skill

• To involve in the planning and design of mechanical engineering works for building services.
• To prepare tender documents, design and technical specifications for tenders, as well as supervise the installation and commissioning of mechanical works.
• Able to liaise both end user customers and vendor and supplier for project coordination.
• Onsite support upon customer request if necessary to have first-hand look for project requirement.
• Responsible for all on-site technical and engineering matters
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems
• To read and draw technical drawing
• Well versed in Autocad
• Material Procurement
• Assist Manager in Project Integration
• Strong analytical, Problem solving & Decision Making Skill

Job Description

Thermo Fisher Scientific Inc. is a global leader in science, with annual revenue over $40 billion. Our mission is to help customers improve health, cleanliness, and safety worldwide. We provide support for life sciences research, analytical challenges, diagnostics, therapies, and laboratory efficiency. With our industry-leading brands like Thermo Scientific, Applied Biosystems, and Fisher Scientific, our team of 100,000+ colleagues offers innovative technologies and pharmaceutical services. Learn more at www.thermofisher.com.

The Position

In this crucial position, you will have direct accountability for the mechanical crafting of laboratory equipment produced at our Singapore facility. You will collaborate closely with outstanding marketing experts and gain valuable insights from a diverse range of backgrounds within project management, operations, multi-functional engineering, and scientific teams.

Key Responsibilities

• Develop high-tech plastic/Sheetmetal designs with cost, specifications, and timing in mind
• Design for service, manufacturability, and reliability
• Support, steer, and empower internal and external mechanical designers (suppliers)
• Define and specify new designs and drive them to results
• Conduct FMEA and Safety Risk Assessments
• Define test plans and strategies
• Assume a hands-on role in pursuit of testing plans and problem-solving test and reliability work
• Maintain and ensure systems and procedures are in compliance with ISO and regulatory requirements

Requirements

• Degree in Mechanical Engineering or equivalent experience with a minimum of 5 years of meaningful work experience
• Experience in 3-D solid modeling: SolidWorks, Pro/Engineer; direct experience with SolidWorks preferred
• Familiarity with various engineering materials (primarily plastics and metals) and the manufacturing processes employed in making products using these materials (e.g., casting, molding, machining, injection molding)
• Experience in conceptualizing innovative and creative designs using strong analytical and problem-solving skills
• Proven track record to deliver high-quality product designs with a focus on DFM and DFS
• Experienced in providing technical leadership
• Experience in developing requirements, verification and validation plans, and risk analysis
• Ability to understand and solve sophisticated design challenges both independently and as part of a design team
• Understanding of CE and product safety regulatory standards
• Excellent communication, organization, follow-up, and documentation skills
• Knowledge and experience working to engineering and ISO standards, including ISO 9001: Quality System

We seek candidates who take initiative, self-confident, and conceptual problem solvers. You are someone who combines excellent communication skills with strong collaboration skills, easily switching between thinking on a high/conceptual level and to a detail level.

You have perseverance, are determined and passionate about quality, cost, and time. You possess a strong analytical perspective and a practical approach, adapting easily in a complex product development setting. You prioritize value and are capable of setting and following through on priorities simultaneously.

Join Us

In addition to competitive benefits and compensation, we are seeking candidates who are enthusiastic about working in a diverse, multi-cultural, and innovative technology environment. Our company emphasizes personal growth and team collaboration as essential components of success. We value diversity in our teams as it contributes to a dynamic and stimulating work environment. We expect all community members to demonstrate integrity, intensity, innovation, and involvement.

Thermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other legally protected status.

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Technician
• Working Location: Ang Mo Kio
• Working Hours: 5 Days/ 6 Days per week, 9am – 6pm
• Salary Package: Basic Salary + OT + AWS
• Duration: Permanent

Key Responsibilities

• Install, maintain and repair electrical machines.
• Identify and diagnose issues with machinery to perform timely repairs.
• Perform routine maintenance and inspections to ensure optimal performance.
• Assist with the development of existing or new machines.
• Helps in the sourcing of machine parts and liaise with vendors when required.
• Other ad hoc duties as assigned.

APPLY NOW!!!

• Proven experience in the electrical and machinery fields.
• With good understanding of electrical systems.
• Technical drawing knowledge is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Well Established Company
• Basic $3000 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working day: Monday to Friday
• Working house: 8am to 5pm

Job Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day-to-day activities
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors
• To manage all Mechanical & electrical Instruments spare parts and tools

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Min 2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Benefits:
• $2600 - $3000 + Allowance
• 5 Days
• MNC with better career prospect
• Multiple locations hiring: West/ East Region

Job Scope
• Perform routine inspections, maintenance, and repairs on mechanical systems.
• Provide technical support for troubleshooting and resolving mechanical issues.
• Installing, setting up, and testing new equipment or systems.
• Conduct quality checks on mechanical components and systems.
• Assist in preparing inspection reports.
• Handle some aspects of sales quotations and order processing.
• Assist technician with additional projects as needed.

Job Requirements:
• Entry level is welcome to apply. On job training will be provided.
• Nitec/ Higher Nitec/ Diploma in any Engineering or equivalent.

To Apply, kindly click on the "APPLY NOW" button and job details.
We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

• To involve in the planning and design of mechanical engineering works for building services.
• To prepare tender documents, design and technical specifications for tenders, as well as supervise the installation and commissioning of mechanical works.
• Able to liaise both end user customers and vendor and supplier for project coordination.
• Onsite support upon customer request if necessary to have first-hand look for project requirement.
• Responsible for all on-site technical and engineering matters
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems
• To read and draw technical drawing
• Well versed in Autocad
• Material Procurement
• Assist Manager in Project Integration
• Strong analytical, Problem solving & Decision Making Skill

Job Description:

Handling of work orders (email and physical)

Arranging of repair works

a) Liaising with vendor and permit to work application

Minor repair and maintenance works

a) Replacement of cabinet door hinges

b) Replacement of electrical plugs

c) Replacement of light bulbs (low height)

d) Any other minor repair works

Routine servicing work

a) Cleaning of fan motor area for all chiller and freezer (3 times/store/year)

b) Cleaning of cables and plugs

Assist in project

Operating supplies control

a) Control of operating supplies inventory.

b) Issuing of operating supplies.

Requirements:

Basic knowledge of maintenance and repair.

Able to work on weekend and odd hours.

A willing to learn attitude.

Self reliant.

Must be able to lift heavy objects.

EA License 23C1570

EA Personnel R1547369

Recruitment Firm By VISI Intergroup Pte. Ltd.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Able to read and understand construction drawings and detect discrepancies for combined services.
• Responsible for the smooth and timely completion of projects
• Maintain all operational documentations and records
• Monitor and review performance of mechanics and draughtman
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Prepare and issue of weekly and Monthly QA/QC reports.
• Manage projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications to ensure cost control, maintain project timeline, manage manpower resources for the project.
• Undertake ad-hoc responsibilities assigned by sale manager / director

Requirements

• Degree in Mechanical Engineering
• At least 2 years experiences, preferably in the building & construction.
• Ability to work under pressure and to tight deadlines.
• Ability to communicate complex concepts
• Able to work independently and in a team
• Good interpersonal, analytical and problem-solving skills
• Required to travel to construction sites and analyze the deployed machineries' repair status when the need arises.
• Good understanding of local regulatory and code requirements.