1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Responsibilities

· Carry out Electrical, Instrumentation, Control and Automation (EICA) design for water and wastewater treatment projects.

· Manage the procurement, costing and delivery of electrical software and hardware required

· Make automation programming according to clients’ technical specifications

· Arrange control panel assembly, testing, and installation at construction site

· Modification and Integration of new equipment / system with existing automation system

· Update of SCADA/HMI graphic to reflect new instruments/equipment and mapping these graphics to the corresponding field signals

· Attend to EICA breakdowns with diagnosis and solutions

· Attend meetings with subcontractors and clients for technical clarifications and arrangements.

· Coordinate with Project Managers to ensure deliverables are within the schedule.

· Keep records of EICA design, drawings, and document systematically

· Provide support and assistance to Sales Department and Maintenance Team

· Guide and educate junior EICA personnel.

· Other ad-hoc assignments.

Requirements

· Bachelor's Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

· Minimum 3 years working experience at membrane base water treatment plant, preferably

· Proficient with Schneider / Siemens / Allen-bradley software

· Well-versed with SCADA and HMI

· Excellent communication skill

· Good personality and team spirit

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours：

Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

The Solutions Engineer is responsible for the installation, technical support and maintenance of software applications that help customers manage their manufacturing processes and improve production efficiency. He/She should have a deep understanding of the application's functionality and backend. He/She is responsible for interacting with the application users and setting up, and onboarding of the users. He/She collaborates with the sales team to promote products and services to meet customers needs and requirements. He/She is also familiar with the relevant software platforms on which the solutions are deployed and uses critical thinking skills to identify and solve problems. The job requires being on standby with on-call availability and travelling to overseas customer sites.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description & Responsibilities:

Reporting directly to the Assistant Project Manager, Project Manager, Senior Project Engineer is responsible for the following:

• Lead and manage project supervisors to ensure the successful completion of projects.
• Ensure adherence to project budgets, schedules, and scope of work, while deploying appropriate staff resources.
• Review and assess project drawings, plans, specifications, and other relevant documents.
• Identify and troubleshoot issues arising during project execution and implement timely resolutions.
• Conduct and actively participate in weekly site meetings to monitor project progress.
• Collaborate with the Safety Officer to ensure compliance with quality standards and health & safety regulations.
• Monitor site staff to ensure strict adherence to all safety regulations.
• Strong analytical and problem-solving skills, resourceful and meticulous;
• Highly motivated and pro-active with the ability to work both independently as well as in a team;
• Perform night work based on project needs.
• Prepare and submit project reports in a timely manner.
• Develop project drawings, including as-built drawings and shop drawings, as required.
• Perform any other tasks as assigned by the Assistant Project Manager, Project Manager.

Knowledge/ Skills/ Abilities:

• Knowledge of building and structural details, working drawings and local construction practices.
• Knowledge of local regulations and engineering standards.
• Good verbal and written communication skills.
• Good organizational and interpersonal skills.
• Able to work independently and as a team.
• Good time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.
• Familiar with tender and bidding processes.
• Familiar with local regulations pertaining to building, construction and safety.

Requirements:

· Diploma/Bachelor’s degree in Electrical Engineering or related field.

• Proficient in Microsoft Office (Outlook, Word, Excel and PowerPoint) for Windows.
• Ability to work with flexibility to work long hours when necessary.

· Minimum 5 years of experience in electrical engineering, in Residential/Industrial/Commercial and/ and other types of buildings and/or construction.

• Certification in BCSS (Building Construction Supervisor Safety) or higher safety certification.

· Proficiency in electrical design software (AutoCAD, Revit, Navisworks,BIM360, ACC), strong knowledge of electrical codes and standards, excellent problem-solving and communication skills.

• STM - MCU Programming Development.

• Firmware/Hardware Support and Development.

• Manual soldering/desoldering SMT/Throughhole components.

• General production support.

• Handling general maintenance and repairs.

• Any other duties as assigned by Supervisor / Management.

• Responsible for QA, QC.

• Reports to Construction Manager
• Preparation of detailed schedule and monitoring the progress closely to ensure on-time completion
• Prepare detailed method statements and relevant documents
• Coordinate between client, sub-contractor(vendors), suppliers and internal team
• Attend the meeting with the stakeholders
• Generate and handle company reports, meetings, and documents required
• Propose alternative work method or other way to increase productivity
• Handle technical and engineering issue
• Ensure the activities comply with the quality, environment, health & safety requirements

Job requirements:

• Bachelor’s Degree in Civil engineering or equivalent
• At least 2 years’ experience in the construction & supervision of vehicular structures and road projects preferably with LTA infrastructure projects
• Attained technical expertise and knowledge in Civil Engineering Construction especially in foundation, structural, ERSS and viaduct
• Proficient in Microsoft Office and AutoCAD
• Attained CSCPM/BCSS, Work At Height, confined space certification would be an advantage
• Good interpersonal skills
• Hardworking and willing to learn
• Willing to commit 5.5 working days each week and occasional night works when required
• Project : Viaducts
• Location : Woodlands

• Manage & develop new customers based for service sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• To identifying and developing sales & marketing strategies to exhaust opportunities in the local market as well as to exploit overseas markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with the construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly:

[email protected]

Digify is a cloud-based document security and data room software that allows customers to control, protect and track important documents after sharing them. Companies use Digify to protect confidential information for fundraising and due diligence, secure intellectual property, and protect sensitive communications.

Digify is used in 138 countries today. We have more than 600,000 users worldwide.

The Role

Digify is seeking a talented and motivated Full Stack Developer to join our team. You will play a vital role in developing and maintaining end-to-end solutions that drive the success of our products and services. The ideal candidate is passionate about coding, eager to learn, and ready to contribute to the development of innovative document security solutions. You will work closely with cross-functional teams to design, develop, and maintain applications that meet business requirements and delight users.

WHAT YOU WILL BE DOING

• Front-End Development:
  • Develop responsive web interfaces using modern frameworks such as React and Angular.
  • Ensure seamless user experiences by integrating front-end designs with back-end systems.
• Back-End Development:
  • Build and maintain APIs, microservices, and integrations
  • Design and manage databases, such as DynamoDB and PostgreSQL, to ensure efficient data storage and retrieval.
• Collaboration & Problem Solving:
  • Work closely with UI/UX designers, product managers, and other developers to implement new features.
  • Debug and optimize code for performance, scalability, and reliability.
• Testing & Deployment:
  • Write and maintain unit, integration, and end-to-end tests.
  • Assist with deployment and maintenance of applications in cloud environments such as AWS

WHAT YOU NEED TO HAVE

• Bachelor’s degree in Computer Science, Software Engineering, or a related field, with 3 to 5 years of professional experience as a Full Stack Developer.
• Basic understanding of cloud platforms, such as AWS and GoogleCloud, and serverless architecture
• Proficiency in front-end technologies: HTML5, CSS3, SASS and one modern framework (e.g., React, Angular).
• Proficiency in back-end development using languages like NodeJS, .Net, Python
• Familiarity with database management systems such as DynamoDB, MySQL and PostgreSQL
• Good understanding of Design Patterns and Data Integration Patterns
• Good understanding of application performance, scalability, security engineering
• Knowledge of version control systems, particularly Git.
• Strong problem-solving and troubleshooting skills
• Experience with providing third level support of production environments
• Strong sense of ownership
• Good communication skills and the ability to work collaboratively in a team environment.
• Utilize and integrate with tools like Jira & Confluence, Bitbucket and any kinds of code analysis tools like Codacy.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Education:

Diploma/Degree in Electrical Engineering, Computer Engineering, Computer Science

or with experience of at least 3 years and above
or both.

Programming Competency:

Competent in programming languages C++, C#, SQL database and .Net Framework 2.0 and above environment.

Competent in PLC and inverter systems preferred

Other Requirements

Only S’pore citizens/PRs need to apply.

Able to lead a small team in projects.

Need to communicate with project/site managers regarding project requirements.

Proficiency in English essential as submission of site reports is required.

Preferred

Competent in PLC and inverter systems preferred

Knowledge and experience in port and warehouse cranes, preferred.

Able to use Autodesk electrical CAD with hands on electrical experience, preferred.

Candidates with class 3 driving license are preferred.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job description

1. Responsible for project planning, scheduling & co-ordination
2. Responsible for monitoring work progress to ensure timely completion of projects
3. Responsible for liaising with clients and the team on project requirements
4. Responsible for supervising all the construction on site
5. Conduct site inspections and supervision to ensure works carry out comply with quality standards, drawings and project specification
6. Ensure timely and smooth progress of works
7. To perform QA/QC role on area assigned and to ensure safety regulations are being compiled on site.
8. Prepare Progress report, project handover report and claim report
9. Any ad-hoc tasks assigned.

Job Requirement

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• Required skill(s): MS Office, AutoCad.
• Preferably with 5 years HDB precast experience

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts