Description of Responsibilities

• To carry out mechanical installation of Automated Materials Handling System (ASML) in cleanroom environment
• Ability to obey, follow, execute, and follow up on instructions by higher management, independently or as part of a team.
• Timely delivery of projects or tasks at hand
• Escalate and highlight any discrepancies, issues, or problems during job progress.
• Create, maintains, and signs off Proof of Delivery (POD) for submission to relevant departments.
• Able to put in compensated extra hours when requested and required due to the unforeseen work environment and schedule.

Key Performance Indicators (but not limited to)

• Timely delivery of projects or tasks at hand
• Punctuality
• Attendance

Career Prospects:

Candidates can aspire to take on leadership role in other areas of work within Build It department

Critical Skills/Knowledge:

• Effective Interpersonal and Communication Skills
• Air-con repairing / mechanic experience will be advantage

Education:

• O'Level and above

Other Considerations:

• Comfortable to work at heights and tight spaces

As a Mechanical Architect you will be the driving force for the development of high-tech, highly complex systems for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. Starting during the pre-concept phase, you act as a counterpart for the Project Manager within T&D for scoping the project and challenging our customer. While going through the different design phases, you will be the driving force who challenges the feasibility and cost-effectiveness of the proposed design solutions, bringing together the multidisciplinary team on a technical level while acting as a technical counterpart on system level with our customers.

Your responsibilities include:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer.
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of (mechanical) concepts.
• Definition Phase: develop Description of System Design Requirements and Specifications and discuss them with internal/external stakeholders.
• System Design Phase: generation of system design concepts and reviews:
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications.
• Make use of your creativity and helicopter view to find solutions in case of conflicts
• Detail Phase: supervise the creation of 3-D models and drawings, ensuring (sub)module interfaces meet their respective requirements.
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production.
• Production release: release the design for production.

Requirements:

• Master’s Degree or PhD in Mechanical or Mechatronic Engineering, preferably with a focus on construction / precision mechanics.
• At least 10 years of relevant working experience (semicon, precision mechanics, or similar).
• Extensive knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness.
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation.
• Experienced in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems in both the static and dynamic domain.
• User of 3D design tools (e.g. NX or SolidWorks).
• User of product lifecycle management systems (e.g. TeamCenter or EPDM).

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description & Requirements

• Assist in coordinating and supervising maintenance and overhauling jobs
• Monitor and update job status daily.
• Supervise mechanical works (Remove/re-installation and Overhauling works of Motors, Generators and Pumps).
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Project Sales Engineer (Mechanical Engineering)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Interested applicants can send your resume to 8739 9469 Janie and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

#SCR-jiajia-fun

Fun Jia Jia (Janie) | Reg No: R22107945
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis to support our client's project, to start in 2025.

*Work Location: Tuas (company shuttle bus is provided)

*Working days: 5.5 days

About the role:

• The T&C Lead Engineer will assist the T&C Manager in overseeing all testing and commissioning activities of the Contractors, including coordinating related activities that interface with the project.
• The T&C Lead Engineer will help lead the OE’s testing and commissioning team and coordinate with the Resident Site Supervision (RSS) Team, the OE’s design team, and the Contractors. This collaboration will focus on reviewing the development and execution of the Contractors' testing and commissioning plans to ensure the achievement of project milestones for each EPC Contract.
• The T&C Lead Engineer will support the T&C Manager in overseeing all aspects of the Contractors' testing and commissioning activities, including managing interfaces between EPC Package 1 and EPC Package 2. This oversight will encompass the entire process from dry/cold commissioning to hot commissioning, culminating in successfully completing the commissioning process and trial run, including optimization of plant operations with the Contractors and Operations & Maintenance teams.
• The role includes participation in regular T&C Coordination Meetings with the Contractor and/or other Contractors on adjacent sites, which may also include Client representatives.
• The T&C Lead Engineer will handle any other tasks delegated by the T&C Manager as needed.

About you:

• The T&C Lead Engineers shall have at least 5 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.

• The T&C Lead Engineer to have a relevant engineering degree or certification.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

• Working Location: Jurong Island
• Working Hours: Weekdays, 8am to 430pm
• Transport from Jurong East MRT
• Basic Salary: $4500 - $5500

Objective:
To ensure the safe, efficient, and reliable operation of mechanical systems by overseeing maintenance activities, improving maintenance management systems, and optimizing equipment performance to support operational goals.

Job Scope:

• Oversee and supervise in-house and external contractors for mechanical maintenance activities.
• Manage daily, transition, turnaround, and upgrading maintenance projects.
• Ensure compliance with HSEQ standards, statutory requirements, and industry best practices.
• Establish and improve maintenance management systems to ensure equipment reliability.
• Maintain accurate maintenance records for analysis and troubleshooting.
• Conduct root cause analysis and implement corrective/preventive actions.
• Optimize and manage spare parts inventory for critical and non-critical equipment.

Requirements:

• Bachelor’s Degree in Mechanical Engineering.
• Minimum 3 years of experience in a chemical process plant.
• Familiarity with static and rotating equipment.
• Strong analytical and problem-solving skills.
• Ability to work well under pressure and collaborate across functions.

We regret that only shortlisted candidates will be notified.

Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu

Registration Number: R24124814

EA License Number: 02C4944

People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705

http://www.peopleprofilers.com

• Ensure that the construction works are done according to drawings and within specified requirements.
• Check thoroughly drawings and instructions received and also highlight their discrepancies and work changes to the Project Manager.
• Prepares and submits method statements and alternative proposals as and when required.
• Liaise closely with the client’s representative and other work changes.
• Prepares site records of variation work and other work changes
• Liaise with sub-contractors/suppliers of different trades pertaining to sub-contract activities to be executed on-site
• Report any problems, discrepancies or changes that affect the quality of the works.
• Assist to enforce the Quality Management System on-site, including safety management.
• Assist to ensure that all construction activities comply with the Authority.
• Collate information from Supervisor/Foremen of the different trades to compile and prepare the Site Daily Report including the progress report.
• Assist the Quality Surveyor in preparing the monthly progress claims, VO claims and verifies suppliers and sub-contractors claims.
• Candidates with sound knowledge of Plumbing & Sanitary.
• More than 6 years experience in Singapore

• Ensure that the construction works are done according to drawings and within specified requirements.
• Check thoroughly drawings and instructions received and also highlight their discrepancies and work changes to the Project Manager.
• Prepares and submits method statements and alternative proposals as and when required.
• Liaise closely with the client’s representative and other work changes.
• Prepares site records of variation work and other work changes
• Liaise with sub-contractors/suppliers of different trades pertaining to sub-contract activities to be executed on-site
• Report any problems, discrepancies or changes that affect the quality of the works.
• Assist to enforce the Quality Management System on-site, including safety management.
• Assist to ensure that all construction activities comply with the Authority.
• Collate information from Supervisor/Foremen of the different trades to compile and prepare the Site Daily Report including the progress report.
• Assist the Quality Surveyor in preparing the monthly progress claims, VO claims and verifies suppliers and sub-contractors claims.
• Candidates with sound knowledge of Plumbing & Sanitary.
• More than 6 years experience in Singapore

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

This is a newly created role and we are looking for candidate who has start-up experience in Ship Repair Mechanical functions.

Job responsibilities

• Leading the team of mechanical technicians and common contractors workers
• Oversees and support the execution of ship repair mechanical projects
• Set up and train the mechanical team of technicians to establish an effective,flexible and reliable support base

Job requirements

• GCE 'O' level or at least 5years of supervisory with start-up experience in Ship Repair industry
• Must be comfortable to work in shipyard environment
• Candidate with relevant working experience will be preferred

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description

• To drive maintenance activities to maintain high efficiency of the equipment and minimise machine downtime as per KPI.
• To lead troubleshooting and root cause analysis of machine delays especially on mechanical faults.
• To develop and implement maintenance plans on all equipment to minimise downtime.
• To monitor cost as per KPI, maintain inventory of spares, liase with vendors and partners and to coordinate activities with other departments to ensure efficient operation.
• To develop, plan and implement automation projects to improve machine safety, reduce human intervention and maximise productivity.

Job Requirements

• Bachelor Degree in Mechanical / Electrical Engineering or equivalent studies
• Minimum 2 years in the maintenance field
• Experienced in automation, mechanical & electrical maintenance in a manufactoring environment
• Safety conscious
• Able to work in a hot and dusty environment

Job Responsibilities:

• Liaise with the Main contractors on the planning and progress of M&E work to meet the project schedule
• Supervise M&E works to ensure it adhere to specifications, are completed on schedule, within budget, and accurately documented.
• Undertake additional tasks as required to support operational needs and project requirements.

Requirements:

• Background in M&E works. Diploma in Civil/Mechanical Engineering/ relevant on-job experience is a plus.
• Minimum 5 years of working experience in similar role within the construction industry
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• 6 day workweek. Shift work might be required during critical phase.
• Willing to work on-site

Role Responsibilities

• Responsible for the running of small, medium and large size projects in Singapore and throughout Asia Pacific
• Undertakes a client facing role in the development, design and coordination of engineering project services for mechanical designs, installations, systems, equipment and facilities
• Actively involved in the production of drawings, calculations, schedules and specifications for all related mechanical/electrical systems
• Significant focus on the design of Mission Critical Data Centre Mechanical services including all equipment, systems and interfaces. For mechanical services including cooling, AC, ventilation, generator fuel delivery systems, associated hydraulic systems, public health & plumbing, fire protection
• Carries out feasibility, due diligence, condition/dilapidation and other types of surveys and tests on new & existing sites and facilities in respect of mechanical services
• Visits sites regularly and carries out inspections during construction stage of projects to ensure that the designs produced are realized practically and accurately
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress, ongoing requirements for deliverables against detail and programme and direct liaison with and advice to clients
• Represents Company at technical meetings with clients, stake holders, professional and contractors teams
• Ensures engineering deliverables, including drawings, calculations, schedules and specifications meet required robust industry and legal standards
• Leads on the coordination of engineering services internally between MEP disciplines and externally between MEP and all other relevant designs
• Takes a holistic view in the selection and application of engineering concepts and solutions
• Based in Singapore but may be required to travel through out the region and between offices

Role Requirements

• At least 8 years overall experience with 3 years Data Centre design experience
• Broad design experience across Commercial, High Rise, Hotels & Leisure would be beneficial
• Degree or higher in appropriate engineering discipline or have sufficient equivalent experience
• Singapore Professional Engineer registration or progress towards beneficial
• Significant experience in production of drawings, calculations, schedules & specifications for a range of building types
• Sound knowledge of key Health and Safety issues and legislation including Singapore DfS
• Knowledge of MS Office applications Outlook, word, excel, PowerPoint etc
• Knowledge of AutoCAD/Revit/Hevacomp/IES/Amtec etc BIM/CAD calculation software
• Good understanding of Singapore and, preferably, Asia regional standards/Regulations/Codes
• Be a motivated, highly dependable individual
• Strong engineering fundamentals, including design principles, machine elements, materials, and fabrication methods
• Ability to prioritize own workload
• Ability to work to deadlines
• Managerial skills, projects and resources focused
• Presentation skills
• The ability to perform complex project / business case analysis to justify technical decisions and present the justification to management in a high level review

Descriptions

• Plan, execute and supervise all M&E related work services.
• Manage M&E works and services for effective and efficient M&E facilities performance.
• Coordinate and supervise the M&E installation and building maintenance work.
• Working closely with the client, sub-contractors, and the project team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
• Involve in the preparation of the method statement, work progress, drawings and other relevant documents related to M&E works.
• Assist in planning, controlling and coordinating of mechanical, electrical and building works.
• Schedule, monitor and supervise the progress of works .
• Prepare and follow- up closely on the client inquiries and quotations.
• Follow the company internal work processes and documentation.
• Involve in conducting toolbox meeting and coordination meeting.
• Coordinate, liaise and communicate with people of all levels
• Build and maintain good client relationships and uphold high quality standards.

Requirements

• Minimum Diploma / Degree in Engineering or Facilities Management related qualifications.
• M&E Facilities operations background with at least 3 years of experience will be an added advantage. Advantage to have Fire Safety Protection Certification.
• Candidates looking for Electrical Engineer position or currently working as M&E / Electrical Engineer (For Facilities Maintenance / Management industry) are welcome to apply.

Tan Choon Hau

Senior Talent Acquisition Consultant

EA Licence No:18C9251

EA Reg ID: R1988835

About our client: Our client is a leading international chemical manufacturing company.

Work Location: Jurong Island (company transport provided)

About the role:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:

(a) daily maintenance [preventive, corrective, & breakdown maintenance],

(b) transition maintenance,

(c) turnaround maintenance and

(d) upgrading and improvement related to maintenance

• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s
• HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability
• objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

About you:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.
• An aptitude for and interest in chemical process
• Analytical skills
• Ability to work well under pressure
• Good communication skill and able to collaborate with different functions
• Problem-solving skills

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Role:

Project Sales Engineer (Mechanical / Engineering Design)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Job Responsibilities:

• To perform mechanical fitting job, machine assembly and maintenance, which requires knowledge of machine fits and tolerances
• To lead a team of technicians in preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of machinery and equipment having assigned and allocated resources to meet targets through planned and scheduled annual maintenance activities
• To carry out metal working for hot works
• To execute welding work
• To operate heavy machinery and perform lifting works
• To read mechanical drawing

Job Requirements:

• Candidate must possess at least secondary school education/ NITEC
• Past experiences in heavy industry/ metal fabrication shops/ machine maintenance will be preferred
• Candidate should possess basic knowledge of computer and data entry, and basic command of English (ability to read, write and speak)
• Able to work rotation shift and weekends

Job Description

Perform mechnical & piping design review, technical agreement review and other engineering related matters for new building and conversion projects

Job Requirements or Responsibilities

• To support project in addresings engineering issues involving designers and classifications.
• To perform TA review in accordance with the contractual requirement and review schedule.
• To conduct an integration meeting involving pertinent parties for the purpose of design integration.
• To scrutinize all drawings received from supplier and designers, and provide comment as per contractual requirements, rules & regulations and operational practice

We are involved in robotics and automation solutions.

We need part time mechantronics technician to support us from time to time.

Work includes assembling parts into a device, testing the device, checking the quantity, assisting in wiring and paper work.

This is a part time work and is also ad-hoc. Flexible working hours.

Location is in Woodlands and/or other places.

Responsibilities:

• Prepare Product / Architectural / Mechanical drawings with AutoCAD / Solidworks.
• Work within stated procedures to ensure that design records/controls are maintained.
• Provide product technical support to customers / suppliers.
• Ensure Supplier’s Quality meet our Quality Standard.
• To Initiate / propose / participate in Quality Improvement.
• Take part in new product development.
• Other ad-hoc job assigned by the supervisor.

Requirements:

• Min Degree in Mechanical/Engineering or equivalent.
• Good understanding of Precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Ironmongery industry.
• Minimum 3 to 4 years experience in mechanical field or Ironmongery industry.
• Required language(s): English, Mandarin (to liaise with 90% Mandarin speaking customers - majority, and suppliers in regard to technical support).
• Well verse in Solidworks & AutoCAD Software.
• Responsible, mature, independent with a positive attitude and willingness to learn.

Additional Information

• Office Location: 141 Woodlands Industrial Park E 5, Woodland E-Terrace Singapore 757507.
• Working Hours: Mondays to Fridays (8:30am to 5:30pm), Alternative Saturdays (8:30am to 1:30pm)

For immediate consideration, please indicate the following information in your resume:

(a) Current and expected salary

(b) Earliest available date to commence work

Please note that qualified applicants who are immediately available will be given priority, and we regret that only shortlisted applicants will be notified.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781