Salary: $4.2k - $5k

Location: AMK / Yio Chu Kang / Central

Job Requirements:

● Min 5-8 years of relevant experience and above

● All Mechanical must have experienced in ACMV & LTA/SMRT

● Minimum Qualifications/ Experience/Skills

● Graduate in Mechanical Engineering.

● Advanced skills using company software

● Proven ability to communicate well in written and verbal communications

● Design thinking for product inventions and enhancements

● Motivation and commitment to providing interpersonal customer service

● Knowing and applying current industry standards and information

Job Descriptions:

● Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team.

● QA/QC documentation of engineering deliverables (DTS,MSS,RFI)

● Liaison with clients, project managers, architects, contractors

● Assist in resolving any technical problems faced during project design and/or construction stages

● Any other required duties as required by the Project Team.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

As a Mechanical Architect you will be the driving force for the development of high-tech, highly complex systems for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. Starting during the pre-concept phase, you act as a counterpart for the Project Manager within T&D for scoping the project and challenging our customer. While going through the different design phases, you will be the driving force who challenges the feasibility and cost-effectiveness of the proposed design solutions, bringing together the multidisciplinary team on a technical level while acting as a technical counterpart on system level with our customers.

Your responsibilities include:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer.
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of (mechanical) concepts.
• Definition Phase: develop Description of System Design Requirements and Specifications and discuss them with internal/external stakeholders.
• System Design Phase: generation of system design concepts and reviews:
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications.
• Make use of your creativity and helicopter view to find solutions in case of conflicts
• Detail Phase: supervise the creation of 3-D models and drawings, ensuring (sub)module interfaces meet their respective requirements.
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production.
• Production release: release the design for production.

Requirements:

• Master’s Degree or PhD in Mechanical or Mechatronic Engineering, preferably with a focus on construction / precision mechanics.
• At least 10 years of relevant working experience (semicon, precision mechanics, or similar).
• Extensive knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness.
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation.
• Experienced in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems in both the static and dynamic domain.
• User of 3D design tools (e.g. NX or SolidWorks).
• User of product lifecycle management systems (e.g. TeamCenter or EPDM).

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

JOB RESPONSIBILITIES

• Perform basic drafting

• Prepare design drawings / calculations / schematic diagrams / reports for;

o Mechanical ventilation system

o Fire protection system

• Perform prescriptive / performance-based submissions to Fire Safety Department (FSD)

• Attend meetings with clients, consultants, inspectors and authorities

• Perform basic report writing (optional)

• Perform CFD simulations (optional)

• Perform occupants evacuation simulations (optional)

REQUIREMENTS

• Basic numerical and communication skills (written and verbal)

• Able to work in teams

• Attention to detail and iterations

• Candidate is expected to be autonomous under supervision and guidance

• Basic familiarity with Fire Code 2018, local code of practices and standards

• Familiarity with software (Mandatory)

o CAD

o Microsoft Word

o Microsoft Excel

o Microsoft Powerpoint

• Familiarity with software (Optional as training will be provided)

o Corenet

o Pyrosim

o Fire Dynamic Simulator

o Pathfinder

ACADEMIC QUALIFICATIONS

• Minimum B.Eng. (Mechanical) from a recognised institution.

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical Engineering (ACMV, Fire Protection) or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Mechanical Service Engineer/Mechanical Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9 am – 5.30 pm (One Saturday per month, 9 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Perform engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• Conduct other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• Provide a service report with necessary recommendations & findings.
• Provide technical support for site engineers and customers whenever necessary.

APPLY NOW!!!

• Entry-level candidates with Higher Nitec, Diploma or Degree in Mechanical Engineering.
• Able to read and understand basic Mechanical diagrams.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66137 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Mechanical Engineer
• Working Location: Jurong East
• Working Hours: 5 days (Monday to Friday (9 AM - 6 PM)
• Salary Package: Basic Salary up to $7,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment design, hands-on assembly, testing, troubleshooting, and supporting projects related to jacket flooding systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the O&G industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66240 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities

• Daily Update of Project / Operation Progress to immediate superior.

• To have and maintain good daily attendance and punctuality.

• To update team member at least 2 working days in advance before going for leave , in order to minimize downtime.

• Ensure to know project scope of works and meet the client’s needs as per project standard and requirements.

• Supervise and oversee the sequential activities of Structural, Piping &

Mechanical Equipment (SMP) Installation such as Receiving, Locating in

the lay down, Preservation, Foundation and Structure, Receiving from

Main Contractor/Suppliers/Vendors, Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement, Touch up Painting and Hand Over.

• Must have working knowledge of all applicable piping and structure

standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.

• Managing project scope and change control with commercial or without commercial impact.

• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.

• To procure and requisition materials based on interpret construction and technical drawings.

• Communicate with Engineering/technical/quality requirement to team individuals.

• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance. Departments & Subcontractors and interfaces with other REL' s Business Units.

• Working closely with main contractor and client to ensure the project

meets the required needs.

• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.

• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g.

PTREI and Subcontractors).

• Preparation of method of statement, risk assessments for Piping,

Mechanical & Steel Structure Scopes.

• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.

• To liaise with clients representative on all project issues and

subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.

• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site.

• Communicating with Project Management Team / QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works.

• Assist with the management of internal and external third party interfaces.

• Monitoring and assist of site construction team for Installation, Testing and Pre-Commissioning works related to SMP Scopes.

• Liaise with respective functions or Bu's to prepare project planning,

contracts, procurement, progress reports and claims.

• Timely Setting out the target, plan and accurate achievement including manpower, materials and machineries as per scope and budget.

• To outsource the Shop-Prefab for Piping and Steel Structure Scope, Shop and Field Painting, Galvanising, Metal Roofing, Shop drawings (TEKLA),etc.

• Able to have understanding of systems and subsystems of the plant in order to expediously complete and handover to Client.

• To take note the Variation order (VO) and to take note of any Notice of Delay (NOD) during execution of the project.

• Nominating and training of supervisors, foremen, fitters, welders and

general workers to be capable of doing works well.

• To initiate and undertake action to prevent the occurrence of nonconformity.

• Promote best practice for Safety, Quality and Productivity.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to

eliminate and reduce HSE hazards, aspects and risks.

Requirements

• Preferably bachelor’s degree in engineering or relevant Pre-U/ A level/

College/ Diploma/ Advanced/ Higher/ Graduate Diploma/ Office Skill

Certificate or equivalent

• Preferably computer literate in MS Office Word, Excel and PowerPoint

• Preferably minimum 3 years’ experience of in oil and gas industry or related field

• Good oral and written communication skills in English

• Positive attitude with good interpersonal skills, excellent problem-solving skills backed by solid technical knowledge

• Ability to work in a dynamic and fast paced environment.

• Able to complete tasks with little or no supervision.

• Motivated Team player

Key Responsibilities:

• Perform maintenance, repairs, and troubleshooting on a variety of vehicles.
• Conduct inspections and ensure vehicles meet safety and operational standards.
• Assist in diagnosing mechanical issues and recommend solutions.
• Collaborate with engineers to implement improvements in vehicle performance.
• Maintain detailed records of repairs and services performed.

Requirements:

• Diploma or certification in Mechanical Engineering or a related field.
• Proven experience in vehicle maintenance and repair.
• Strong understanding of mechanical systems and tools.
• Attention to detail and problem-solving skills.
• Ability to work both independently and as part of a team.

Jobs Description & Requirements:

The Junior Technician is responsible for the diagnostic, testing as well as repair, production and overhaul of mechanical, electrical and electronic components of the chillers and other related systems in support of our overall chiller manufacturing process with fellow technicians.

Key Responsibilities:

· Manufacture industrial chillers in collaboration with other technicians encompassing sheet metal work, welding, assembly of refrigeration system, electrical wiring, temperature controller setup

· Evaluate final product’s overall performance, reliability and safety

· Diagnose, test as well as manufacture, repair and overhaul mechanical, electrical and electronic components of the chillers and other related systems in accordance to production BOM/ WO

· Delivery of chillers and components to end customers and setup on-site

· Generate 2D engineering & electrical drawings with Autocad software

· Perform all other duties as assigned and required.

Requirements:

· Candidate must possess at least a Diploma in Engineering (Electrical/Mechanical) or equivalent.

· At least 2 – 3 year(s) of working experience in HVAC/ Industrial Chiller fields

· Required Skill(s): 2D Autocad

· Required Spoken and Written Language(s): Basic English, Mandarin

· Singapore/SPR Only

· Preferably with class 3 driving license

· Salary will commensurate with qualifications and experience

· Working Hours : Mon to Fri (8.00 am to 5.00pm) & Sat (8.00am to 3.00pm)

If you are keen to join Group of Weeseng, contact us at 6245 2712 or email to

finance@ weeseng.com

Job Highlights:

• Successful candidates will be assigned to million dollars Hospital project.
• An M&E Contractor with 40 years of establishment.
• Good career path advancement with learning opportunities, and bonus entitlements.

A senior quantity surveyor in mechanical engineering manages the costs of a project, from the initial stages to completion. They also ensure that the project meets the client's needs and stays within budget.

Responsibilities

• Project management: Oversee projects from the tender stage to handover
• Cost estimation: Forecast capital requirements and monitor expenditure during construction
• Contract management: Study contract documents, handle progress claims, and variation orders
• Tendering: Design and prepare tender proposals, and analyze tender submissions
• Documentation: Collect data, prepare bills of quantities, and ensure documentation is well-prepared
• Site surveys: Attend and evaluate site surveys
• Collaboration: Work closely with the project team to submit progress reports and final accounts

Responsibilities:

• Degree in Quantity Surveying or Mechanical Engineering or equivalent.
• 3 to 5 years of relevant experience in the building/data centre/hospitality industry
• Ability to manage project costs and contractual agreements
• Ability to produce constructions that meet the client's needs

If you are shortlisted for the first round of screening, our Recruiter will contact you directly.

EA License No: 21C0571 | EA Reg No:21103634 (Johnny Wu)

机电协调员（M&E coordinator）

Job responsibilities（工作职责）：

(1) Review project specifications and technical clarifications.

(2) Supervise the M&E works and coordinate with client, consultants and sub-contractors.

(3) Understand contract requirements and M&E specifications in order to monitor progress, quality of workmanship and compliance with project requirements/construction schedule.

(4) Coordinate with in-house architectural & structural team to minimize discrepancies.

(5) Check and prepare material sample with shop drawing submission.

(6) Prepare M&E coordination drawings and liaise with Architectural Coordinators and Design Engineers for drawing issuance.

(7) Assess, prepare and submit progress claims for project consultants & subcontractors.

Requirements（要求）：

(1) Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.

(2) At least 5 Year(s) of working experience in main-con, preferably in large-scale public renovation project.

(3) With good relationship with the authorities will be preferred.

Job Description

• To be able read Hydraulic Circuit Drawings

• Experience in Heavy machinery related to hydraulics such as crane, winch & HPU tc..,

• Experience working in any Marine Vessel /Ships

• Has Knowledge in Instrumentation & Motor Control

Job Requirement

• ITE in Mechanical

• Able to write Service Report

• Able to follow the safety procedure

• Computer Literate

• Can work independently

• Willing to work overseas & accept offshore/onboard assignment

Job Benefits

• Positive and close knitted working environment

• Training Provided

• Onboard Allowances

• Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

- Able to read mechanical drawing

- At least 2 years working experiences with mechnical ducting, fire suppression, ACMV environment & Gas piping

- Team player

- Able to wor OT if required.

- Able to work 6 days

- Good communication skills

-Monitoring the daily progress of projects.

-Providing detailed updates to project managers or other stakeholders.

-Ensuring team members have the supplies and resources they need to complete their assigned tasks on time and within their budget limits

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Minimum Qualifications/ Experience/Skills

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• Proven ability to communicate well in written and verbal communications
• Design thinking for product inventions and enhancements
• Motivation and commitment to providing interpersonal customer service
• Knowing and applying current industry standards and information
• Soft skills including a positive attitude, flexibility and conflict resolution
• The ability to solve problems creatively on time
• Having up-to-date knowledge and technical skills

机电协调员（M&E coordinator）

Job responsibilities（工作职责）：

(1) Review project specifications and technical clarifications.

(2) Supervise the M&E works and coordinate with client, consultants and sub-contractors.

(3) Understand contract requirements and M&E specifications in order to monitor progress, quality of workmanship and compliance with project requirements/construction schedule.

(4) Coordinate with in-house architectural & structural team to minimize discrepancies.

(5) Check and prepare material sample with shop drawing submission.

(6) Prepare M&E coordination drawings and liaise with Architectural Coordinators and Design Engineers for drawing issuance.

(7) Assess, prepare and submit progress claims for project consultants & subcontractors.

Requirements（要求）：

(1) Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Master's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.

(2) At least 5 Year(s) of working experience in main-con, preferably in large-scale public renovation project.

(3) With good relationship with the authorities will be preferred.

Responsibilities:

• Inspect, troubleshoot and fix running equipment as necessary.

• Identify operating problems and perform emergency repair.

• Perform routine maintenance work on TBM equipment.

• Responsible for the installation of TBM parts including repair and replace damaged/worn out parts;

• Supervision during TBM assembly, tunnelling, and dismantling.

• Testing of TBM equipment to ensure smooth running.

• Oversee the daily activities at work site to meet project progress.

Requirements:

• Possess Certificate/Diploma/Degree in Mechanical Engineering

• Min. 8yrs experience in tunneling industry

• Experience with Tunnel Boring Machine (TBM), Vertical Sinking Machine (VSM) and Pipe Jacking Machine

• Good oral & written English

Responsibilities:

• Execute and complete scheduled operations and maintenance (O&M) tasks, along with ad-hoc maintenance activities, within set timelines and with the highest quality standards.
• Conduct routine inspections and checks of each equipment and process unit, accurately filling out and submitting checklists to the supervisor without delay.
• Perform scheduled preventive and predictive maintenance tasks, submitting maintenance records and checklists promptly to the supervisor.
• Address equipment breakdowns with corrective maintenance, ensuring all checklists and records are submitted to the supervisor.
• Report any equipment abnormalities or failures to the supervisor and assist in implementing rectification plans.
• Support operations activities as needed.
• Perform initial troubleshooting for equipment issues and report findings to the supervisor; assist in more advanced troubleshooting when required.
• Supervise maintenance contractors to ensure work is completed to standard.
• Promptly alert the supervisor to any unusual occurrences or potential damages.
• Maintain a safe and clean working environment by adhering to Environmental Health and Safety (EHS) procedures, rules, and regulations.
• Manage equipment, parts, and supplies inventories by monitoring stock levels and anticipating the need for spare parts.
• Undertake other tasks as assigned by the supervisor.

Requirements

• Diploma in engineering or Higher Nitec (mechanical, electrical, or industrial)
• Minimum of 3 years’ experience in facilities engineering or similar
• Strong communication skills with a positive mindset, hardworking, and capable of multi-tasking effectively.
• Customer Service oriented mindset
• Knowledge of fire alarm systems.
• Understanding of building regulations and health and safety.
• Excellent communication skills, including the ability to work well with non-engineering colleagues.
• Problem-solving skills and the ability to troubleshoot on the spot.

Duties & Responsibility

• Assembling and Dismantling of TBM and STP
• Able to troubleshoot and follow up on STP operating systems
• Supervise the daily maintenance activities in TBM and STP
• Commissioning of mechanical systems of TBM and STP
• Able to resolve water and slurry system at site
• Maintaining TBM, STS and STP check sheet
• Other ad hoc duties as assigned by the Immediate Supervisor/ Management

Requirements:

• Diploma / Degree in Engineering or related field
• Possess certificate in Building Construction Supervisor Safety Course
• Minimum 5 years of experience in operating slurry TBM in tunneling works
• Candidate must have experience in handling STP Plant and centrifuge systems

Summary:

• The Mechanical QP will be responsible for ensuring that all mechanical engineering designs and installations comply with regulatory standards and project specifications. This role requires a minimum of 10 years of experience in mechanical engineering and a proven track record of working on large-scale developments.

Responsibilities:

• Review, approve, and endorse mechanical designs to ensure compliance with local building codes and regulations.
• Oversee and certify mechanical installations and construction works.
• Provide technical guidance and mentorship to the engineering team.
• Liaise with clients, regulatory authorities, and project stakeholders to address compliance and safety matters.
• Conduct site inspections and audits to ensure adherence to approved designs and safety standards.
• Stay updated on regulatory changes and ensure that all project activities align with current standards.

Requirement:

• Bachelor’s Degree in Mechanical Engineering or a related field.
• Certified as a Qualified Person (QP) with a minimum of 10 years of relevant experience.
• Strong knowledge of local building codes, regulations, and industry standards.
• Excellent problem-solving, communication, and project management skills.
• Experience working on large-scale residential and commercial projects.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Responsibilities:

• Inspect, troubleshoot and fix running equipment as necessary.

• Identify operating problems and perform emergency repair.

• Perform routine maintenance work on TBM equipment.

• Responsible for the installation of TBM parts including repair and replace damaged/worn out parts;

• Supervision during TBM assembly, tunnelling, and dismantling.

• Testing of TBM equipment to ensure smooth running.

• Oversee the daily activities at work site to meet project progress.

Requirements:

• Possess Certificate/Diploma/Degree in Mechanical Engineering

• Min. 8yrs experience in tunneling industry

• Experience with Tunnel Boring Machine (TBM), Vertical Sinking Machine (VSM) and Pipe Jacking Machine

• Good oral & written English