WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Working Day: 5 Day | Mon – Fri 8.30am – 6pm

Location: Ang Mo Kio

Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical (ACMV) services.
• Good knowledge in Mechanical works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for Mechanical (ACMV) services is preferred

Job scope

• Preparation and submission of Mechanical tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on Mechanical QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis to support our client's project, to start in 2025.

*Work Location: Tuas (company shuttle bus is provided)

*Working days: 5.5 days

About the role:

• The T&C Manager will represent the Owner’s Engineer (OE) and supervise all testing and commissioning activities of the Contractors. This includes coordinating testing and commissioning efforts related to the project.
• The T&C Manager will lead the OE’s testing and commissioning team, collaborating closely with the Resident Site Supervision (RSS) Team, the OE’s design team, and the Contractors. This collaboration will focus on reviewing and refining the Contractors' testing and commissioning plans to ensure timely achievement of project milestones for the EPC Contracts.
• The T&C Manager will oversee all aspects of the Contractors' testing and commissioning activities, managing the interfaces between EPC Package 1 and EPC Package 2 as necessary. This oversight will cover the entire process from dry/cold commissioning to hot commissioning, culminating in a successful completion of the commissioning process and trial run, including optimization of plant operations with the Contractors and Operations & Maintenance teams.
• The role involves direct communication with the Client’s Technical Directors and Project General Managers (PGMs).
• Attendance at Client Monthly Project Steering/Working Committee Meetings, chaired by the Deputy CEO, and any other relevant high-level meetings as requested by the Client, Project Director, or Site Officer is also required.

About you:

• The T&C Manager shall have at least 15 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.

• The T&C Manager shall have a relevant engineering degree or certification.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

• Able to perform corrective Mechanical Maintenance for all Power Plant Stationary and Rotary Equipment located in Banyan CCP3 and BWWT as assigned by Mechanical Engineer /Supervisor.

Key Roles and Responsibilities

• Carry out inspections as per daily maintenance schedule; attend defects, breakdowns, including the repairing and calibration of Mechanical Equipment.
• Conduct disassembling and assembling of Mechanical Equipment and of Gas turbine, Steam Turbine, HRSG, BOP and BWWT for repairs/rehabilitation.
• Hands on experience of valves, pumps, compressors, piping, safety valves, control & shutoff valves etc
• Assist the Maintenance Mechanical Engineers to troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure.
• Assist the Maintenance Mechanical Engineers to develop Risk Assessment and mitigation measures for every Maintenance job in the plant
• Apply for Permit to Work (PTW) as the Competent Person (CP) for every Maintenance work in the plant
• Supervise contractors and liaise with other maintenance crafts and operations technicians to execute maintenance activities
• Withdraw and prepare spares from warehouse for job execution.
• Prepare daily updates on Maintenance activities for the day to all stakeholders (operations)
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

Qualification, Skills and Experience

• Min ITE in engineering field
• Preferably minimum 3 years of experience in the relevant maintenance fields in a power plant / petrochemical industry

Behaviour/ Traits:

• Organized, detail oriented and ability to multi task.
• Good team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Independent with initiatives, resourceful and positive attitude.
• Possess good leadership skills

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

· Institution-first Mindset – Put the interest of the Group ahead of individual interests.

· Collaboration – Deliver through collaborating across markets, businesses and functions.

· Accountability – Hold team and self accountable to deliver on our commitments.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.

Job Description

To conduct laboratory tests (using e.g. electrodynamic shaker and temperature/humidity chambers) in accordance with the test procedure.

To direct the test operator on the operation of test equipment (e.g. electrodynamic shaker and temperature/humidity chambers) to meeting the test requirement [NOTE: There are several laboratories which the AE is required to make (approximately 10 trips) to these laboratories every quarter.]

To liaise with equipment designers by coordinating the date/time to perform functional checks on Product Under Test.

To perform visual inspections of Product Under Test before and after tests in accordance with visual inspection checklist.

To inform customer on any test anomaly to discuss on follow-up action required.

To provide records of test and visual inspection results.

To perform mechanical assembly work.

Requirements

• Higher NITEC / Diploma in Mechanical Engineering

• ESS/PDU xperience will be advantageous but not essential

• Able to work independently with minimum supervision

Working Hours

The working hours are as follows:

Mondays to Thursdays: 8:30am to 6:00pm

Fridays: 8:30am to 5:30pm

Lunch: 1 hour

Supervise building construction works (M & E)

Familiar with air-con ducting fabrication and installation

Work experience in clean room is highly advantageous

Familiar with construction site WSH rules and regulation

Able to communicate simple english

Possess Building Construction Supervisor Safety (BCSS) certificate is an advantage

Class 3 driving license will be an added advantage

Work at height supervisor (WAH) certificate preferred

Scissors lift/ boom lift certificate an advantage

Willing to involve hands on when required

Able to join ASAP

Singaporean/ SPR preferred

Responsibilities

• Responsible for sourcing, evaluation and purchasing of materials
• Negotiate with vendors for competitive prices and quality
• Prepare purchasing document, quotation, tender, agreement and contracts
• Monitor and ensure on time delivery to ensure customer fulfilment
• Ensure compliance on quality standards, procurement policies and procedures
• Identify new and potential suppliers to expand supplier based to improve sourcing capabilities
• Any other duties as assigned

Requirements

• Bachelor or Diploma in Supply Chain Management or Business Administration or equivalent
• At least 3 - 5 years of procurement/ buyer experience, preferbaly from M&E industry

Interested candidates who wish to apply for the advertised position, please send in your updated resume to [email protected]

EA License No: 13C6305

Reg. No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP).

This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement. Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP. AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure. You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP.

You can apply here: https://aces.aceplp.com.sg/apply/nt/

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

The Mechanical Engineer is responsible for the engineering and delivery of mechanical and structural aspects of construction under direction from the Construction Manager. Their activities will involve coordinating design and construction efforts, resolving on site engineering issues and planning and tracking productivity targets.

Key responsibilities and accountabilities

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attends meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensures that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provides written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

Safety

• Undertake all responsibilities in a safe manner.
• Ensure a safe working condition is present for all employees, contractors and visitors.
• Participate in daily pre-start meetings.
• Use appropriate personal protective equipment and safety systems such as job safety analysis, pre-work checklists and risk assessments.
• Comply and have input into safe working procedures.
• Report hazards, incidents and accidents within company guidelines.
• Assist with safety sections for reports, tenders and proposals.
• Actively participate in safety training.

Other

• Prepare and implement Workpacks, including ITPs
• Detailed planning and engineering of works
• Procurement of suppliers and subcontractors
• Subcontractor and Supplier Management
• Monitor, control and update program and productivity metrics
• Enthusiastically and co-operatively undertake all site inductions as requested by the client.
• Proactively continuously monitor and evaluation systems and procedures specific to site works to ensure that they are up to date, compliant and up-to-date in line with best practice.
• Actively participate in regular learning and development programs to continually enhance and further develop skills and continuously improve capabilities and performance.
• Portray a professional approach at all times through attitude and appearance.
• Ensure that work space is well managed, tidy, organised and safe.
• Comply with all UGL systems and processes and expected behaviours and standards.

Qualifications and Education Requirements

• Mechanical Engineering Qualification.
• Minimum 5 years’ experience in project related disciplines.
• Significant engineering experience throughout, design, construction and commissioning on Brownfields and Greenfields projects.
• Technical experience includes; rotating equipment, static equipment, GE equipment, materials selection, hydraulic systems, pipelines and piping components
• Strong communication skills (oral & written) including strong negotiation and influencing skills and the ability to establish effective working relationships with a variety of people at different levels both internally and externally.
• Demonstrated ability to work independently to organise and prioritise demands, handle multiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast paced environment with multiple and competing demands
• Proficient skills in computers: MS Word, Excel, Access, Outlook
• Leadership ability

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines