Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

M&E Technical Manager (Electrical/ Mechanical)

• Working Day: 5Day | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio
• Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Job scope

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis to support our client's project, to start in 2025.

*Work Location: Tuas (company shuttle bus is provided)

*Working days: 5.5 days

About the role:

• The T&C Manager will represent the Owner’s Engineer (OE) and supervise all testing and commissioning activities of the Contractors. This includes coordinating testing and commissioning efforts related to the project.
• The T&C Manager will lead the OE’s testing and commissioning team, collaborating closely with the Resident Site Supervision (RSS) Team, the OE’s design team, and the Contractors. This collaboration will focus on reviewing and refining the Contractors' testing and commissioning plans to ensure timely achievement of project milestones for the EPC Contracts.
• The T&C Manager will oversee all aspects of the Contractors' testing and commissioning activities, managing the interfaces between EPC Package 1 and EPC Package 2 as necessary. This oversight will cover the entire process from dry/cold commissioning to hot commissioning, culminating in a successful completion of the commissioning process and trial run, including optimization of plant operations with the Contractors and Operations & Maintenance teams.
• The role involves direct communication with the Client’s Technical Directors and Project General Managers (PGMs).
• Attendance at Client Monthly Project Steering/Working Committee Meetings, chaired by the Deputy CEO, and any other relevant high-level meetings as requested by the Client, Project Director, or Site Officer is also required.

About you:

• The T&C Manager shall have at least 15 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.

• The T&C Manager shall have a relevant engineering degree or certification.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Responsibilities

• Responsible for sourcing, evaluation and purchasing of materials
• Negotiate with vendors for competitive prices and quality
• Prepare purchasing document, quotation, tender, agreement and contracts
• Monitor and ensure on time delivery to ensure customer fulfilment
• Ensure compliance on quality standards, procurement policies and procedures
• Identify new and potential suppliers to expand supplier based to improve sourcing capabilities
• Any other duties as assigned

Requirements

• Bachelor or Diploma in Supply Chain Management or Business Administration or equivalent
• At least 3 - 5 years of procurement/ buyer experience, preferbaly from M&E industry

Interested candidates who wish to apply for the advertised position, please send in your updated resume to [email protected]

EA License No: 13C6305

Reg. No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Develops and manages new designs in accordance with project requirements and objectives, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Proficiency in CAD software for 3D modeling and technical drawings, SolidWorks knowledge will be preferred.
• Strong understanding of materials and manufacturing processes. Knowledge in machining, metal forming, heat treatment and casting are preferred.
• Knowledgeable in design principles, such as springs, bearings and hydraulics, and in theoretical calculations related to the field of statics, dynamics and kinematics.
• Keen interest and experience in a hands on approach towards the construction of prototypes and testing.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

M&E Technical Manager (Electrical/ Mechanical)

• Working Day: 5 Days | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio, Singapore
• Salary: S$ 6,000 - 9,000 + Bonus
• Singapore M&E Service Providers

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Job scope

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Product area

The Data Center team designs and operates some of the most sophisticated electrical and HVAC systems in the world. We are a diverse, upbeat, creative, team-oriented group of engineers committed to building and operating powerful data centers.

Job description

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components).

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Additional job description

As a Facilities Technician, you will operate, monitor, and support physical facilities conditions for our data centers.

Qualifications

Job responsibilities

• Be responsible for the uptime, maintenance, and troubleshooting of water pumps and treatment systems, Heating Ventilating and Air Conditioning (HVAC), and Control and Monitoring Systems.
• Operate, monitor, maintain, and respond to abnormal conditions in the data center facilities systems and equipment. Provide tracking and trending operational characteristics.
• Support startup, commissioning, and integration of new equipment and systems into facilities infrastructure. Direct the execution of starting-up, commissioning, documentation, and full facilities turnover on assigned projects.
• Provide operational and maintenance insights into the design review process.
• Produce standards and templates for global control/monitoring system analysis, diagnostic, preventive maintenance, and trend logs for data center critical facilities systems.

Minimum qualifications

• Associate's degree, trade school certification, or other certified training in a related technical field, or equivalent practical experience.
• 5 years of experience in operating and maintaining mission critical facilities (data centers, hospitals, pharma, refineries, power plants, industrial, etc.).
• Commissioning experience of HVAC and mechanical distribution systems (chillers, air handling units, etc.) to include air and water side systems.

Preferred qualifications

• Experience with maintenance on mechanical or Mechanical, Electric and Plumbing (MEP) systems, and capable of independently resolving common system failures.
• Experience with operations in a data center and troubleshooting for mechanical/HVAC systems.
• Ability to work with varying outdoor temperature conditions, perform material handling (lifting/shifting) and work on platforms, ladders, and under raised floors.
• Ability to learn quickly and address issues as they arise during normal operations or during emergency conditions.
• Ability to work non-standard 12 hour shifts including weekends and holidays on-call rotation.

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (1 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Job Description:

• Collaborate with consultants to manage and coordinate M&E design works for MRT projects.
• Oversee and develop CCSM and M&E designs in consultation with LTA, SWCs, and relevant authorities.
• Review specifications, ensure compliance with terms and conditions, interpret drawings, obtain budget approvals, and manage related documentation.
• Plan and technically coordinate the installation of M&E services.
• Supervise and work closely with consultants, sub-contractors, and site operations teams to ensure smooth on-site installation processes.
• Liaise with relevant authorities to secure design approvals and work permits.
• Coordinate sub-contractors' M&E activities, monitor schedules, and ensure high-quality deliverables throughout the project.
• Ensure compliance with construction procedures and safety standards, guaranteeing quality workmanship that meets stringent requirements during site tests and inspections.

Job Requirements:

• Bachelor's Degree in Mechanical or Electrical Engineering or a related field.
• Minimum of 10 years of relevant experience, including supervision of at least two LTA MRT underground projects of similar scale and complexity.
• Proficiency in BIM software and AutoCAD is highly advantageous.
• Experience in drafting tender specifications is preferred.
• Strong communication, analytical, and writing skills.

Interested applicants please click apply now!

Hey Rocket Pte. Ltd. (EA 21C0816)
Tan Zi Jian (R23116456)

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

We are representing our client, a well-established international mechanical and engineering consulting company that specializes in providing building services engineering across multiple sectors, including Industrial, Healthcare, Residential, Commercial, Hospitality, and Retail. We are seeking suitable candidates for the role of Mechanical and Electrical Executive Engineer/Project Engineer.

MECHANICAL AND ELECTRICAL EXECUTIVE ENGINEER/PROJECT ENGINEER

Responsibility

· Design and manage mechanical and electrical engineering systems (e.g., MVAC, Electrical, Lifts, Fire Protection, Plumbing, and Sanitary) for projects across sectors such as residential, office, commercial, healthcare, and institutional.

· Perform design work for greenfield projects, ensuring alignment with project objectives and technical requirements.

· Ensure all engineering activities comply with relevant drawings, project specifications, and regulatory standards.

· Oversee site operations, including supervising M&E personnel, tracking progress, verifying drawings and materials, and managing method statement submissions and approvals to ensure quality and timely completion.

· Maintain accurate records of M&E activities, including tests, defect rectifications, inspections, work progress, materials, equipment, and safety compliance.

· Monitor the installation of M&E systems, coordinating with contractors on-site, and addressing technical issues promptly.

· Conduct system testing and inspections with consultants to ensure compliance with project requirements and standards.

· Prepare and submit regular reports to the project manager detailing project progress, delays, defects, and any necessary rectification measures.

· Attend consultant meetings and manage the relevant M&E aspects of construction activities.

Requirements

· Bachelor's Degree in Mechanical or Electrical Engineering, or equivalent.

· At least 8 years of experience in M&E design and implementation.

· A minimum of 5 years of relevant experience in the construction industry, preferably with a focus on Civil Engineering projects.

· Proven experience in the construction industry is essential.

· Ability to multitask and thrive in a fast-paced environment.

· Demonstrated initiative, self-drive, and the ability to work independently.

· Strong problem-solving skills with high attention to detail.

· Excellent communication and teamwork skills.

We regret that only shortlisted candidates will be notified.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (3 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Responsibilities

· Assist, plan and execute or draft Mechanical / Electrical / Fire / Plumbing & Sanitary (MEPL) project in compliance with safety, quality, and schedule

· Create process flow diagrams, general arrangement drawings, piping & instrumentation diagrams, and isometrics.

· Draft and prepare Shop drawing / as-built drawing of the given MEPL service with (CAD) software.

· Ensure all drawings are in accordance with the standards set by company’s quality.

· Perform file management on a regular basis.

· Participate in continual quality check and improvement of work activities.

· Complies with company safety regulations and ethics.

· Ability to work under pressure.

· Assist to propose value engineering methods with the clients to interpret their requirements and represent them in the field.

· Provide technical submission of proposal / drawings / MOS / RA etc

· Able to travel for site survey/study to better understand conditions/limitations onsite and attend site meetings and necessary site walk

· Cooperate and communicate effectively with internal and external stake holder.

· Review engineering deliverable and initiate appropriate corrective actions

· Any other duties as assigned and comply to ISO / OSHA standards

Requirements:

· 2-3 Year(s) of working experience in managing Additional and Alteration services in Commercial / Industrial / Plants sectors MEPL services

· Candidate must possess at least Bachelor's Degree/ Diploma in Engineering or drafter / mechanical experience.

· Proficient in Good software usage in Autocad / Solidwork / Revit / BIM etc software.

· Able to work independently and yet a team player with leadership.

· Ability to handle multiple projects and task with a high attention to detail.

· Pleasant, mature, meticulous with good interpersonal skills.

· Proficient in MS Excels/words/PowerPoint/Project.

· Preferred skill sets: good leadership skill, self-Driven, resourceful, problem-solving nature, strong business acumen, project management and good conversational/writing skills in English

Job Description:

• Update and control of Mechanical Engineering specification,procedure and drawings in CMMS (Computerized maintenance management system).
• Register, control and maintenance of assets management in CMMS.
• Material Management including consumables,parts and spare units in CMMS.
• Respond to breakdowns, diagnosing faults, record and report in CMMS.
• Review and approve of service, repair and overhaul equipment, record and report.
• Managing staff “shift or on-call' work as necessary.
• Planning and supervising scheduled maintenance, improvement and investment works.
• Contract and evaluation of cost including technical proposal on improvement and investment works.
• Managing vendors, suppliers and contractors including performance appraisal.
• Managing staff KPI (Key Performance Indicator), appraisal and training plan.
• Ensuring compliance with machinery and equipment statutory requirements.
• Ensuring compliance with QEHS (Quality, Environment, Health and Safety) legislation.
• Managing routine 5S at the maintenance workshop, store and work area at site.
• Provide training to Supervisors and Technicians if needed.
• Responsible for maintaining and improving availability of rotating equipment across the Plant.
• Develop and ensure data quality for documents uploaded in the CMMS.
• Develop Mean Time Between Failure, Mean Time to Repair, Failure Mode Effect Analysis template for rotating equipment and implement it.
• Develop and monitor the performance of the rotating equipment.
• Deliver quick and effective technical solutions and proactively interface with other discipline leads for resolving issues.
• Identify bad actors in the plant and reliability improvement.
• Initiate the engineering management of change and execute the changes for plant improvement and modification work.
• Develop and maintain Standard Operating Procedures and Risk Assessments for the maintenance of rotating equipment.
• Planning and execution of all rotating equipment preventive and corrective maintenance.
• Condition monitoring of rotating equipment through online and offline vibration analysis, oil analysis and other techniques.
• Develop training plans for Operations & Maintenance Teams.
• Prepare estimates and budgets for rotating equipment.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group

Job Requirements:

• Degree or Diploma in Mechanical Engineering or Maintenance Reliability Engineering field.
• At least 6 years of working experience in engineering with EPC/EPCM contractors or in Operation & Maintenance in the Oil, Petrol or Chemical plant or similar.
• Knowledge in Refractory repair work is an advantage.
• Strong desire to work in a leading edge industrial environment with a strong focus on reliability and efficiency.
• Strong Verbal and written communication skills.
• Proficient in Computer Skills such as Microsoft Office, Microsoft Project, Auto Cad, CMMS, etc.
• Able to work independently and in a team to achieve departmental goal of lean production.
• Knowledge of Maintenance and Asset Management is an advantage.
• Good knowledge of industrial standards such as API, ASME etc.
• 
  

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.