JOB DESCRIPTION

• All Contracts administration works

• Preparation of plans, contracts, budgets and other documentation

• Quantity take off, cost estimate, contract administrations and support in tender exercise

• Documents preparation for sourcing of quotations for both pre and post tender stages

• Preparation of tender evaluation, conduct negotiation with subcontractors & suppliers

• Liaise with the Procurement Department to ensure that all material are procured in accordance with the project schedule

• To monitor and keep track of the project expenses and try to optimize the project profit.

• To attend progress meetings, technical meetings, material submission meetings and etc to capture all variation claims and potential variation works and time implication

• Responsible for preparation and timely submission of claims, variation orders, budget & cost control and settlement of final account.

• To ensure a timely closure of all main contract and subcontract final accounts.

• Risk analysis evaluation

• Feasibility studies

• Any other adhoc duties when required.

Requirements :

• Possess degree/diploma (Mechanical Engineering / Electrical Engineering /Building/ Quantity Surveying) or similar

• Minimum 2 to 3 years of work experience in Construction industry

• Good written communication skills

• Good track record

• Able to work on multiple projects, within simultaneous timeline

• Maintenance and Troubleshooting: Perform routine maintenance and troubleshooting on electrical systems, equipment, and machinery to ensure optimal performance.
• Installation: Install, test, and commission electrical equipment and wiring as per the company’s standards and technical specifications.
• Electrical Repairs: Diagnose and repair faults in electrical systems, components, and circuits, using a variety of testing equipment.
• Safety Compliance: Ensure compliance with all electrical safety regulations, codes, and company safety protocols at all times.
• Preventative Maintenance: Implement and maintain a preventative maintenance schedule to minimize equipment downtime and extend the life of electrical systems.
• System Upgrades: Assist in the upgrading or replacement of obsolete electrical components and systems to improve efficiency and performance.
• Documentation: Maintain accurate records of inspections, repairs, and maintenance work done, as well as any changes to system designs or installations.
• Night Shift Coverage: Provide support during night shifts as needed, ensuring that electrical systems are operational during off-hours.
• Emergency Response: Be on-call to respond to emergency breakdowns or electrical faults during nights or weekends, ensuring minimal downtime.
• Team Collaboration: Work closely with engineers, maintenance teams, and other departments to identify and resolve electrical issues and ensure seamless operations.

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure the timely completion of given tender assignment

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Able to work a under tight timeline
• Must be team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Role:

• Lead on all Mechanical or Electrical related matters (team & projects)
• Preferably able to perform role as to manage clientele and business development
• Any other areas where candidate can contribute
• Lead a team

Requirements:

• Preferably Professional Engineer (Electrical); LEW(Grade 9) or Professional Engineer (Mechanical)
• More than 8 years of working experiences, preferably in M&E Consultancy firm.

Role:

• Lead on all Mechanical or Electrical related matters (team & projects)
• Preferably able to perform role as to manage clientele and business development
• Any other areas where candidate can contribute
• Lead a team

Requirements:

• Preferably Professional Engineer (Electrical); LEW(Grade 9) or Professional Engineer (Mechanical)
• More than 8 years of working experiences, preferably in M&E Consultancy firm.

机电经理（M&E Manager）

Job responsibilities（工作职责）：

(1) Lead and oversee all M&E engineering activities in construction projects, ensuring adherence to design specifications, approved drawings, and project timelines.

(2) Manage the planning, scheduling, coordination, and integration of M&E systems installation and commissioning.

(3) Supervise M&E subcontractors and vendors, ensuring quality work, safety, and compliance with contractual obligations.

(4) Monitor and track the progress of M&E works, providing regular updates to senior management and stakeholders.

(5) Coordinate with architects, engineers, project managers, and other departments to resolve technical issues, discrepancies, and ensure seamless integration of M&E systems with other building components.

(6) Ensure compliance with regulatory standards, building codes, and quality assurance requirements (e.g., CONQUAS, QM).

(7) Liaise with clients, consultants, relevant authorities, and subcontractors regarding M&E issues, ensuring effective communication and problem resolution.

(8) Ensure M&E works comply with Safe Work Procedures and safety regulations throughout the installation and commissioning process.

(9) Prepare and submit M&E-related documentation, reports, and progress updates as required by the project schedule.

(10) Handle any other ad-hoc duties or tasks as assigned by management.

Requirements（要求）：

(1) Degree in Mechanical & Electrical Engineering or related fields; PE Board recognized degree is preferred.

(2) Minimum 8 years of relevant experience in the construction industry, with strong M&E project management expertise and at least one completed project cycle.

(3) Possess Green Mark Accredited Professional (GMAP) certification is a plus.

(4) Experience with MOHH or HDB projects is a plus.

(5) Proficient in Autodesk Revit, BIM software, or other M&E design tools.

(6) Strong leadership, organizational, and project management skills, with the ability to supervise teams and manage multiple tasks effectively.

(7) In-depth knowledge of M&E systems, installation methods, and industry standards.

(8) Good speaking and writing in both English and Chinese.

(9) With a actual experience of large-scale public building renovation and good relationship with the authorities will be preferred.

Responsibilities:

• To keep track of all tender documents, drawings and corrigendum base on the document control process
• To verify tender drawings/details and prepare tender enquiry
• To assist in quotations, selection of qualified subcontractors/vendors and distribution of relevant tender documents
• Perform quantity take-off for tender projects based on timeline
• Assist with tender evaluation and preparation of tender documents for submission
• Ensure all documentary evidences and contemporary records are documented, filed and complied for substantiation purposes
• Able to read M&E drawings
• Site verifications of variations and taking records for submissions of claims
• Assist project manager/designated staff to evaluate and certify completed work
• Assist in verifying sub-contractor’s claims
• Monitor and report on balance amount

Requirements:

• Candidate must possess at least a Diploma/Advanced/higher/Graduate Diploma in Quantity Survey or Mechanical Engineering or equivalent
• Minimum 3 years QS experiences
• Knowledge & experience in M&E system requirements
• Able to work under pressure and meet tight deadline
• Able to work independently with minimum supervision
• Good knowledge and skill set in Microsoft Office
• Fast learner and willingness to explore new skill sets/technologies

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Abie to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Responsible for all project execution, engineering and operational activities, including resource

management and personnel; drive continuous improvement across the operational management

system, processes and best practices; ensure all projects are performed to the highest safety standards

and quality control.

Reporting to the Regional General Manager, some of your key responsibilities will be;

• Project Management – overseeing the scheduling and resourcing of offshore projects, ensuring all project risk is considered, recorded and communicated to the end client.
• Supply Chain - creating a supply chain in the Singapore/Malaysia that can support operations in the region & partner with operations and warehouse teams globally to source and allocate the equipment as required, ensuring the safe, efficient & on-time mobilization of project equipmentfrom the workshop locally.
• Facility & Equipment Management –fitting out a new facility if there is such requirement, co-ordinating the workspace/facility requirements and equipment resources as required.
• Resourcing & Recruitment – Overseeing the recruitment of all operational personnel, ensuring they are competent and fully trained for their role. You will also manage the technician resources and ensure all projects are delivered with competent personnel.
• Client Management - Ensuring operational technical support matters are dealt with promptly and professionally, making this aspect a key attribute of the Ashtead Technology brand.
• Financial management – you will provide input towards budgeting, reporting and business planning activities and hold responsibility for the project budget and forecasting, including working on CAPEX, and adopting a ‘no surprises’ approach to reporting and communication.

MINIMUM QUALIFICATIONS/EXPERIENCE/SKILLS:

The APAC region is a key growth area for Ashtead Technology and this is a great opportunity to join us at

a pivotal time for the region and organisation as a whole.

What will help you to be successful in this role?

You are an established operations management professional and will have excelled in client facing roles · You will have specific experience with subsea mechanical tooling OR hydraulic drum winches and linear pull winches · You have previous experience setting up and managing operations internationally · You have a track record of delivering projects successfully, with a tenacious and energetic attitude from project initiation through to delivery.

PERSONAL QUALITIES:

• Enthusiastic, focused, insightful, intuitive and efficient
• Can manage changing priorities in order to meet deadlines
• Keen to take on additional responsibility and lend a hand when needed

Responsibilities:

• Inspect, troubleshoot and fix running equipment as necessary.

• Identify operating problems and perform emergency repair.

• Perform routine maintenance work on TBM equipment.

• Responsible for the installation of TBM parts including repair and replace damaged/worn out parts;

• Supervision during TBM assembly, tunnelling, and dismantling.

• Testing of TBM equipment to ensure smooth running.

• Oversee the daily activities at work site to meet project progress.

Requirements:

• Possess Certificate/Diploma/Degree in Mechanical Engineering

• Min. 8yrs experience in tunneling industry

• Experience with Tunnel Boring Machine (TBM), Vertical Sinking Machine (VSM) and Pipe Jacking Machine

• Good oral & written English

Responsibilities:

• Attends and conducts daily toolbox briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Ensures sub-contractors carry out the work as planned.
• Evaluates project to identify issues and opportunities to improve performance
• Ensures good co-ordination and communication between stakeholders.
• Maintains System & Sub System Mark-up Drawings.
• Ensures to follow-up Overall Commissioning and Completion Documentation.
• Creates Punch List, Updating and closing in PIMS.
• Prepares & follow up for signing Mechanical Completion Dossier (MC), signing (By Client) System Completion Dossier (SCD).
• Coordinates and arranges Tri Party Walk down, Discipline Completion Walk down (DCC) & Mechanical Completion Walk down (MC Walk down).
• Follow ups of completion hand over certificates

Requirements:

• Bachelor’s degree in mechanical engineering or related engineering disciplines, Diploma holders with relevant experience are welcome to apply
• 5 years of relevant working experience in construction of offshore platform industry
• Knowledge in PIMS – Omega365 and ProCo System
• A pass in shipyard supervisor safety course
• Must be a team player & be able to work closely with other discipline supervisors
• Willing to work late hours and rotating day or night shifts

Our Addresses:

Seatrium - Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job scope:

• Dealing with all related stakeholders for the M&E projects
• Understanding market price trends
• Capable of administrate on ACMV/Electrical tender and tendering procedures
• Controlling, planning for strategy of all tendering duties
• List the scope of work and commercial requirements in order to determine the risks of the projects
• Preparing and follow up on the Request For Quotations to suppliers/sub-cons in order to ensure tender costing and technical data to be submitted on time
• Taking off Bill of Quantities from the ACMV Drawings, Points of Schedules and Architectural drawings
• Collating price comparison, costing summary and technical proposal in order to prepare tender submission
• Studying the addendum and/or corrigendum documents and update costing summary with technical proposal accordingly
• Diploma/Degree in any engineering related field
• Quantity surveyor experience from M&E construction field
• Salary up to $4000

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Descriptions (OnSite)

• Ensure all plant & equipment on site are well maintained as per the individual maintenance schedules
• Plan, supervise, and coordinate mechanical work activities to ensure smooth execution. Manage and lead a team of mechanical fitters, technicians, and subcontractors to meet project objectives.Attend to repairs or breakdowns promptly and resolve in a safe manner to ensure downtime and delays to the project are minimized
• Oversee the installation, alignment, and maintenance of mechanical equipment, including pumps, valves, compressors, and piping systems.
• Review and verify technical drawings, specifications, and blueprints to ensure accuracy during execution.
• Inspect completed work to ensure compliance with industry standards, project specifications, and client requirements.
• Address and resolve any quality-related issues promptly
• Prepare and submit daily progress reports, manpower records, and inspection checklists.
• Communicate effectively with project managers, clients, and stakeholders to provide updates and resolve concerns.
• Liaise with the electricians to resolve issues jointly
• Co-ordinate and plan for the correct tools to be available required for the task
• Any ad-hoc duties assigned by the department manager

Skills:

• Strong knowledge of mechanical systems, equipment, and tools.
• Proficiency in interpreting technical drawings, schematics, and manuals.
• Excellent leadership, communication, and organizational skills.
• Ability to troubleshoot and resolve complex mechanical issues efficiently.
• Familiarity with industry codes and standards, such as ASME, API, and ISO.

Job Requirement

• Bachelor Degree in Mechanical Engineering or related certifications
• Mechanical Trade certificates or short courses
• Total Relevant Work Experience: 7-8 Years
• Mechanical understanding relating to infrastrcuture
• Good understanding in reading and interpreting shop drawings
• Can do attitute and able to organise the contractors

Job Descriptions

• Attends and conducts daily toolbox briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Ensures sub-contractors carry out the work as planned.
• Evaluate project to identify issues and opportunities to improve performance
• Ensures good co-ordination and communication between stakeholders.
• Maintains System & Sub System Mark-up Drawings.
• Ensures to follow-up Overall Commissioning and Completion Documentation.
• Creates Punch List, Updating and closing in PIMS.
• Prepares & follow up for signing Mechanical Completion Dossier (MC), signing (By Client) System Completion Dossier (SCD).
• Coordinates and arranges Tri Party Walk down, Discipline Completion Walk down (DCC) & Mechanical Completion Walk down (MC Walk down).
• Follow ups of completion hand over certificates

Requirements

• Bachelor’s degree in mechanical engineering or related engineering disciplines, Diploma holders with relevant experience are welcomed to apply
• 5 years of relevant working experience in construction of offshore platform industry
• Knowledge in PIMS – Omega365 and ProCo System
• Able to read P&ID and Test Pack Limits.
• A pass in shipyard supervisor safety course
• Must be a team player & be able to work closely with other discipline supervisors
• Willing to work late hours and rotating day or night shifts

Duties & Responsibility

• Assembling and Dismantling of TBM and STP
• Able to troubleshoot and follow up on STP operating systems
• Supervise the daily maintenance activities in TBM and STP
• Commissioning of mechanical systems of TBM and STP
• Able to resolve water and slurry system at site
• Maintaining TBM, STS and STP check sheet
• Other ad hoc duties as assigned by the Immediate Supervisor/ Management

Requirements:

• Diploma / Degree in Engineering or related field
• Possess certificate in Building Construction Supervisor Safety Course
• Minimum 5 years of experience in operating slurry TBM in tunneling works
• Candidate must have experience in handling STP Plant and centrifuge systems

Summary:

• The Mechanical QP will be responsible for ensuring that all mechanical engineering designs and installations comply with regulatory standards and project specifications. This role requires a minimum of 10 years of experience in mechanical engineering and a proven track record of working on large-scale developments.

Responsibilities:

• Review, approve, and endorse mechanical designs to ensure compliance with local building codes and regulations.
• Oversee and certify mechanical installations and construction works.
• Provide technical guidance and mentorship to the engineering team.
• Liaise with clients, regulatory authorities, and project stakeholders to address compliance and safety matters.
• Conduct site inspections and audits to ensure adherence to approved designs and safety standards.
• Stay updated on regulatory changes and ensure that all project activities align with current standards.

Requirement:

• Bachelor’s Degree in Mechanical Engineering or a related field.
• Certified as a Qualified Person (QP) with a minimum of 10 years of relevant experience.
• Strong knowledge of local building codes, regulations, and industry standards.
• Excellent problem-solving, communication, and project management skills.
• Experience working on large-scale residential and commercial projects.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Responsibilities:

• Support and assist the SRE / RE / RA in duties, review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site
• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, drawings
• Report to the supervising Qualified Persons any work that are not constructed according to the building approved plans, project drawings including shop drawings;
• Report to project manager and/or project consultants any work that are not constructed according to the specifications and drawings;
• liaise with the supervising Qualified Persons and their engineers/architects / specialists on the review and approval of revised designs, amended drawings, specialist drawings, sketches, etc.
• Assist in the review of contractor’s method statements and working procedures, and to ensure that they are followed on site;
• verify progress payment claims, all other claims and reports submitted by the contractors;
• keep and review records of works including materials, samples, site equipment, inspections, test reports and ensure proper documentation, keep track of all records and forms
• oversee the maintenance of the site office, its cleanliness and orderliness, proper filing systems, plans

Requirements

• Diploma in Mechanical Engineering or equivalent from Singapore Polytechnic or other tertiary institutions of equivalent standing; and
• Possess at least 5 years of relevant and practical experience on site.

Roles & Responsibilities

- Prepare drawing for submission to authorities using Autocad software

- Prepare documents for the submission of drawings to relevant authorities

- Going out to sites for checking and inspection

- Any other related work assigned by the Company

- Familiar with Autocad software/SOLID WORKS

- Do not mind travelling to sites

- With working experience prefered

- Able to work and communicate with people from many other countries

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

• Engineering Construction Company
• Competitive Benefits
• Candidates who have completed semiconductor projects will be preferred.

Our client is a Engineering and construction company that specializes designing and delivering mega and significant projects. They are looking for an experienced Senior Mechanical Engineer for their expanding business.

RESPONSIBILITIES

• Expertise in M&E systems, testing, commissioning, and familiarity with construction processes, project management, BIM, and Green Mark 2021 requirements.
• Manage engineering teams, coordinate with stakeholders, and oversee M&E aspects of construction projects.
• Strong analytical, problem-solving, and decision-making abilities for technical issue resolution and goal achievement.
• Knowledge of quality control, industry standards, and safety regulations to ensure compliance and maintain a safe work environment.
• Financial skills to assist in budgeting, reporting, and implementing cost-control measures

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Responsibilities:

• Attends or conducts daily tool box briefing, weekly briefing and to participate in meetings.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations
• Responsible for day-to-day project supervision for new construction platform on site.
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirement.
• Liaises with client's Mechanical Supervisor for inspection.
• Ensures quality check with on sub-contractors on daily basic.
• Ensures good co-ordination and communication between team members, SRM, Engineers and clients.
• Assists with commissioning activities/troubleshooting on site.
• Ensures equipment and vendor package preservation to follow up approved Production planning and control of day to day activities.

Requirements:

• Diploma in Engineering or related engineering disciplines
• Minimum 3 years of relevant experience preferably in the construction offshore platform industry
• Able to multi-task and work in a fast-paced environment
• Good in planning, organising, interpersonal skills and able to work independently
• Willing to work late hours and shift work

Our Addresses:

Seatrium - Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients, consultants, and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), and Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications.
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for the placement of students and younger engineers

APPLY NOW!!!

• Degree in Mechanical Engineering recognized by PEB Singapore
• Min. 2 years of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage.
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67061 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com.

Purpose and Scope

Responsible for M&E works such as ACMV, Electrical, Plumbing and Sanitary etc

Responsibilities:

• Review project specifications and technical clarifications
• Responsible for M&E works such as ACMV, Electrical, Plumbing and Sanitary etc
• Coordinate with Engineers and Architects, and perform site supervision and co-ordination of M&E works
• Review all M&E shop drawings from design team and submit to consultant

Requirements:

• NTC/Nitec/Diploma in Electrical Engineering or its equivalent
• Minimum 3 years’ relevant experience in construction industry
• Possess M&E Coordination Certificate or CoreTrade Supervisor for M&E
• Experienced in Electrical/Mechanical Construction Works
• Candidate must be able to hands-on whenever project requires.
• Due to the sensitive work nature, only Singaporean applicants will be considered.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses, and functions.

Accountability – Hold team and self-accountable to deliver on our commitments.