Key Responsibilities

Perform engineering analysis under general supervision

Design or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of moderate scope under general supervision

Perform and document engineering tests under general supervision

Generate related alpha/gamma documentation for product release under general supervision

Coordinate the procurement and assembly of mechanical components/equipment and identify sources of critical parts and subsystems to resolve moderately complex technical issues

Troubleshoot a variety of mechanical problems of moderate difficultly under general supervision

Implement concepts of moderate product issues and mechanical solutions of moderate difficulty

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations

As a Mechanical Architect you will be the driving force for the development of high-tech, highly complex systems for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. Starting during the pre-concept phase, you act as a counterpart for the Project Manager within T&D for scoping the project and challenging our customer. While going through the different design phases, you will be the driving force who challenges the feasibility and cost-effectiveness of the proposed design solutions, bringing together the multidisciplinary team on a technical level while acting as a technical counterpart on system level with our customers.

Your responsibilities include:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer.
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of (mechanical) concepts.
• Definition Phase: develop Description of System Design Requirements and Specifications and discuss them with internal/external stakeholders.
• System Design Phase: generation of system design concepts and reviews:
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications.
• Make use of your creativity and helicopter view to find solutions in case of conflicts
• Detail Phase: supervise the creation of 3-D models and drawings, ensuring (sub)module interfaces meet their respective requirements.
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production.
• Production release: release the design for production.

Requirements:

• Master’s Degree or PhD in Mechanical or Mechatronic Engineering, preferably with a focus on construction / precision mechanics.
• At least 10 years of relevant working experience (semicon, precision mechanics, or similar).
• Extensive knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness.
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation.
• Experienced in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems in both the static and dynamic domain.
• User of 3D design tools (e.g. NX or SolidWorks).
• User of product lifecycle management systems (e.g. TeamCenter or EPDM).

• Taking the conceptual design through to implementation and handover;
• Progressing all elements of design in-line with the Design Checklist;
• Production of tender specifications and ensuring these align with contractual obligations;
• Mentoring of Mechanical Designers with the intent of securing properly trained personnel for the continual expansion of the company;
• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;
• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;
• Evaluating technical submittals for specification and client requirement compliance;
• Approving Test Packs at each step of construction through to completion;
• Forwarding testing and commission passing criteria to the System Supervisor;
• Evaluating progress claims against work complete;
• Evaluating contractor variation quantity claimed is accurate.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Lead a project team in the following for Mechanical (M&E) services for building projects:

• Concept designed.

• Detail design development.

• Contract documentation.

• Authority submission.

• Site administration to project completion.

Requirements:

• Singaporean / PR.

• At least 2 years of working experience in the related Building Consultancy/Project Management field.

• Degree in Mechanical or related discipline.

• Good inter-personal skills.

• Self driven and able to work independently.

• Basic Proficiency in AutoCAD and BIM.

• Salary $2,500 to $3,500

Job Description

Key Responsibilities

Problem identification and troubleshooting a variety of difficult mechanical problems with limited supervision

Define, coordinate, perform, and document engineering test reports with limited supervision

Develop, design, or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of difficult scope

Perform engineering analysis of difficult scope with limited supervision

Technically lead and/or execute engineering projects, including development of key suppliers. Generate mechanical product specifications.

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle. Establishes standards across all operational processes

Specify and review engineering documentation

Implements concepts for variety of complex product issues and mechanical solutions

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• sponsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• · Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs

Requirements:

• Degree in Mechanical Engineering
• At least 8 years in mechanical maintenance
• Experience in power plant or related process plant experience
• Leadership experience will be a plus

Account Manager:

Kerwin Tan Kai Bin (R1331624)

[email protected]

EA16S8107

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description & Requirements

• Assist in coordinating and supervising maintenance and overhauling jobs
• Monitor and update job status daily.
• Supervise mechanical works (Remove/re-installation and Overhauling works of Motors, Generators and Pumps).
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Job Description

• Prepare and review the design of the Mechanical Works, such as piping & equipment drawings, calculation and data sheets.
• Involve in daily coordination with internal C&S and BIM team to resolve all the clashes, penetration etc.
• Develop the work schedule and coordination of the project works to ensure project is on schedule.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of mechanical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Prepare all relevant checklist for Installation and Testing & Commissioning Works.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Collaborate with internal stakeholders, clients, consultants, vendors and contractors.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all Mechanical Works related design, installation and Testing & Commissioning Works.

Requirements

• Degree in Mechanical Engineering.
• 5 to 8 years of relevant experience in the construction industry. Working experience in water or wastewater industry will be an advantage.
• Familiar with Auto CAD, Mechanical, Structure drawings and Microsoft Office.
• Experience in design, installation, testing and commissioning of the mechanical works e.g. pipings, pumps etc.
• Experience in Project Execution, Project Coordination, Supervising and Coordination with sub-contractors, consultant, and Client.
• Good technical knowledge in understanding the Mechanical System.
• Well versed in BIM software i.e. Bentley and Navisworks
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time on project site.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Responsibilities:

• Liaise with the Main contractors, Site Supervisor on the planning and progress of M&E works to meet the project schedule.
• Supervise M&E works to ensure it adhere to specifications, are completed on schedule, within budget and accurately documented.
• Undertake ad-hoc duties as assigned to support operational need and project requirements.

Requirements:

• Diploma in Construction Engineering / related field.
• Knowledge in design and building project of M&E works and relevant code of pratice.
• Willing to work on-site.
• 5.5days work a week. (Shift work might be required during critical phase).
• Entry Level are welcome to apply. Training will be provided

Project Sales Engineer (Mechanical Engineering)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Interested applicants can send your resume to 8739 9469 Janie and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

#SCR-jiajia-fun

Fun Jia Jia (Janie) | Reg No: R22107945
The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis to support our client's project, to start in 2025.

*Work Location: Tuas (company shuttle bus is provided)

*Working days: 5.5 days

About the role:

• The T&C Lead Engineer will assist the T&C Manager in overseeing all testing and commissioning activities of the Contractors, including coordinating related activities that interface with the project.
• The T&C Lead Engineer will help lead the OE’s testing and commissioning team and coordinate with the Resident Site Supervision (RSS) Team, the OE’s design team, and the Contractors. This collaboration will focus on reviewing the development and execution of the Contractors' testing and commissioning plans to ensure the achievement of project milestones for each EPC Contract.
• The T&C Lead Engineer will support the T&C Manager in overseeing all aspects of the Contractors' testing and commissioning activities, including managing interfaces between EPC Package 1 and EPC Package 2. This oversight will encompass the entire process from dry/cold commissioning to hot commissioning, culminating in successfully completing the commissioning process and trial run, including optimization of plant operations with the Contractors and Operations & Maintenance teams.
• The role includes participation in regular T&C Coordination Meetings with the Contractor and/or other Contractors on adjacent sites, which may also include Client representatives.
• The T&C Lead Engineer will handle any other tasks delegated by the T&C Manager as needed.

About you:

• The T&C Lead Engineers shall have at least 5 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.

• The T&C Lead Engineer to have a relevant engineering degree or certification.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical / Environmental Sustainability to join our Building Services team in Singapore.

You will be joining our Centre of Excellence (CenEx) team, led by one of our Technical Director who was recently conferred the SGBC-BCA Professional Leadership in Sustainability Award.

Senior Engineer – Mechanical (ESD)

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Leading mechanical services design and environmental sustainability design for building projects.
• Assume responsibility and undertake engineering tasks of increasing scope and complexity.
• Carry out site condition assessment, feasibility studies, energy audits and technical due diligence.
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing.
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants.
• In charge of jobs control, planning, monitoring, progress and job cost reporting.
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job.
• Assist in assessment and review of designs prepared by others on behalf of the clients.
• Liaise with authorities on plans submission and compliance.

Pre-Requisites

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5-7 years relevant working experience in the design & supervision of building service projects and Fire Protection.
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Understanding of energy efficient mechanical systems and equipment with Green Building design experience and knowledge of Green Mark/ LEED is an added advantage.
• Competent user of relevant engineering software and simulation tools.
• Excellent written & spoken communication skills in English.
• Able to work independently & exercise initiative.
• Excellent delegation and communication skills, which sees you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

● Education background

● Work experiences

● Reason(s)for leaving

● Current and Expected salary

● Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Responsibilities:

• Attends or conducts daily tool box briefing, weekly briefing and to participate in meetings.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations
• Responsible for day-to-day project supervision for new construction platform on site.
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirement.
• Liaises with client's Mechanical Supervisor for inspection.
• Ensures quality check with on sub-contractors on daily basic.
• Ensures good co-ordination and communication between team members, SRM, Engineers and clients.
• Assists with commissioning activities/troubleshooting on site.
• Ensures equipment and vendor package preservation to follow up approved Production planning and control of day to day activities.

Requirements:

• Diploma in Engineering or related engineering disciplines
• Minimum 3 years of relevant experience preferably in the construction offshore platform industry
• Able to multi-task and work in a fast-paced environment
• Good in planning, organising, interpersonal skills and able to work independently
• Willing to work late hours and shift work

Our Addresses:

Seatrium - Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

* To provide mechanical engineering design expertise during the detailed design phase

* Will be involved in all aspects of the mechanical engineering design and installation supervision

* Engineering package development for cogeneration, flue gas treatment, pressurized equipment, pump, fan, piping etc.

* To prepare tender documents, b i d analysis, operating & maintenance procedures, mechanical drawings and piping layout.

* Assist in the assessment of construction costs, maintenance cost, and safety studies.

Responsibilities

• Reporting directly to top management, you will have the overall responsibility and authority for the effective management and timely execution of the construction projects
• To lead and manage a team of project engineers with responsibilities in the project management of infrastructure and facilities planning & development.
• Ensure that all aspects met the government regulations and standards, including safety of works, inspections and testing of equipment and machinery, training needs of staff.
• Control and monitor work progress and ensure work quality
• Oversee the effective management of project activities to assure timely delivery and low wastage
• Overall planning and controlling of the cost of project execution
• Manage and lead a group of engineers
• Overall co-ordination of the work progress of large and complex project
• Co-ordination with other departments on issues affecting project works
• Liaise with government/Statutory Authorities, consultants, clients, supplier and others
• Provide timely project progress reporting to management
• Detect Project problems and ensure effective corrective measures are executed
• Other ad-hoc duties as and when being assigned

Requirements

• Candidate must possess at least a Degree / Master in Engineering / Construction or equivalent, recognized universities under the BCA is a plus
• Minimum 5-10 years of experience in project management
• Working experience in local building/construction industry preferred
• Proficient in Microsoft Office, MS Project, Primavera and AutoCad
• Possess excellent interpersonal, people management, good communication and negotiation skills and possess strong leadership qualities
• Efficient, strong analytical skills and able to work independently
• Excellent team spirit and able to lead project team towards project completion on time
• Able to work under pressure to ensure smooth project timeline
• Able to start work immediately or within a short notice

Staff Benefits

1. AWS

2. Annual leave 17 days, up to a maximum of 22 days

3. Transportation reimbursement claims (2 ways from home to office/site)

4. VB – subjective

5. Medical/Dental benefits

6. Insurance – Hospital & Surgery, Personal Accident and Term Life

7. Annual heath screening up to $200

8. Mobile Claims up to $100

Working hour: 8.30am to 5.30pm (5 days’ work week)