Job description:

• Dealing with Excavator, Prime Mover, Reach stacker, & forklift problems and repair
• Troubleshooting electrical & mechanical components & inspecting vehicle engine
• Replacing & repairing malfunction parts & potential leaking
• Understanding vehicle diagnostic systems & functions
• Repair experience in excavator, forklift & prime mover, etc

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Responsibilities / Job Description

• Inspect, troubleshoot and fix running equipment as necessary;
• Supervision during tunnelling and dismantling
• Responsible for on-site technical and engineering matters
• Control/monitoring work progress
• Ensure compliance to WSHA, safe work procedure and maintain good house-keeping
• Duties assigned by the M&E Superintendent
• Assist the Mechanical/ Electrical and Operations Staff to target minimal downtime of the TBM

Requirements

• Able to work shift work, 6 day work week
• Preferably 5 years or more experience in LTA Tunnelling project
• 10 years of relevant working experience in the construction field
• Possess relevant trade foreman certificate, NCC, BCSS etc

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

The Mechanical Engineer will be responsible for overseeing the maintenance, repair, and optimization of mechanical systems, machinery, and tools in industrial plants across multiple countries in the Asia-Pacific (APAC) region, including Singapore, Malaysia, Philippines, Taiwan, Japan, and Korea. This role requires supporting local teams, ensuring operational continuity, driving maintenance excellence, and supporting cross-regional projects to enhance plant performance, reliability, and safety.

Key Responsibilities:

Team Coordination and Support:

• Supervise and support mechanical maintenance teams across Singapore, Malaysia, Philippines, Taiwan, Japan, and Korea.
• Provide remote and on-site support, guiding local teams on best practices, troubleshooting, and maintenance techniques.
• Facilitate collaboration across teams in different countries to ensure effective communication and efficient operations.Assist with training sessions and workshops to enhance technical skills across regional team

Standardization of Maintenance Practices:

• Implement standardized maintenance procedures across all plants in the APAC region, ensuring uniformity in operations.
  • Ensure maintenance strategies align with company-wide objectives, KPIs, and global best practices.
  • Support local teams in adhering to global safety, compliance, and quality standards.

Maintenance Strategy and Optimization:

• Plan and execute preventive, predictive, and corrective maintenance across the APAC plants.
  • Monitor maintenance schedules to minimize downtime and increase machinery reliability across all plants.
  • Identify regional opportunities for efficiency improvements and cost reductions in maintenance operations.
  • Analyze plant performance data to drive continuous improvement initiatives and optimize machinery efficiency.

Cross-Regional Troubleshooting and Support:

• Provide expert guidance and troubleshooting support to local maintenance teams in the event of mechanical failures or emergencies.
  • Travel to various APAC countries as needed to provide on-site support for critical mechanical issues or large-scale plant projects.
  • Monitor plant performance across the region, identifying trends and potential issues before they lead to downtime.

Project Support and Regional Coordination:

• Support the execution of large-scale projects, including machinery upgrades, installations, and major repairs in the APAC plants.
  • Coordinate with local teams, contractors, suppliers, and internal stakeholders to ensure smooth project execution.
  • Ensure that projects are completed on time, within budget, and meet the region’s specific needs and safety regulations.

Health, Safety, and Compliance:

• Ensure all maintenance operations comply with local health, safety, and environmental regulations.
  • Support safety audits and risk assessments across all APAC plants, ensuring teams are well-trained in safety protocols.
  • Promote a culture of safety within all plants, ensuring maintenance practices follow industry-leading safety standards.

Documentation,Reporting, and Regional Performance:

• Maintain accurate and timely documentation of all maintenance activities, repairs, inspections, and project updates across the region.
  • Provide regular reports to senior management on maintenance team performance, plant uptime, and cost management.
  • Track downtime, maintenance costs, and equipment performance metrics, providing insights for regional improvements.

Vendor and Supplier Management:

• Manage relationships with key suppliers, contractors, and external service providers across the APAC region.
  • Negotiate contracts, monitor supplier performance, and ensure the timely delivery of high-quality parts and services.
  • Evaluate regional vendors for cost-effectiveness, quality, and reliability.

Responsibilities:

- Produce CNC design solutions for customize specification. Preferably with good technical design and engineering background.
- Produce design for automation
- Make drawings (2D & 3D) in CATIA
- Make parts explosion / BOM list using ENOVIA
- Documentation for fabrication
- Evaluation for design solutions
- Support production for machine modification design
- Do engineering presentations

Requirements:

- Diploma/ Degree in Mechanical Engineering
- Minimum 3 years related work experience
- 2D & 3D CAD operations; strong in CATIA
- Proficient in Microsoft ( Excel / words / power point )
- Independent and is a sound decision maker

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Basic: $2,400 - $2,800
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities

· Establishing and maintaining good working relationships with the

· Customer, ensuring that the customer’s issues and requirements are clearly understood and addressed in an effective and timely manner.

· Responding to and resolving Customer and internal stakeholder technical requests concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of product technical knowledge, technical know-how of system, components, and analytical skills while adhering to sound engineering principles, standards, practices and procedures.

· Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.

· Proactively identifying potential failures, assessing and controlling operational risks on the Power Train with support from the 24/7 remote monitoring hub and expert support

· Proactively advising and assisting the Customer in planning, coordination with MPW for the execution of relevant inspection and maintenance activities.

· Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance.

· Collaborating with and supporting the technical communications between the Customer, various MPW group resources (E.g. LTSA Program Manager, Technical Advisors dispatched by MPW, Field Services, Engineering) and Local Vendors (E.g. Labour, Onsite Machining, Workshop and other Third Party Services) during each Planned or Unplanned Maintenance.

· Supporting the achievement of MPW’s common goals with the Customer including but not limiting to health and safety, environmental protection, customer satisfaction, unit availability, reliability, performance and emissions.

· Presenting and discussing with the Customer the scope and planning of Planned/ Unplanned Maintenance.

· Actively contributing to maintenance planning meetings, pre-outage and post-outage meetings between the Customer and MPW, confirming repair status with Repair Facilities.

· Supporting the Customer in the selection of spare parts to be kept on stock, aiming to increase the timely availability of necessary spare parts while optimizing inventory costs.

· Helping the Customer in selecting tools and equipment required for maintenance of the Covered Equipment.

· Coordinating and supporting the efficient dispatch of Parts and Technical Advisory Services.

Requirements

· Diploma/Degree in a relevant engineering or technical field

· 8 years of proven related work experience, preferably in the Power or Process Industries.

· Previous site work experience in Long Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or industrial plants rotating equipment is preferable.

· Previous customer facing experience where there is regular interaction with plant personnel to provide troubleshooting support and to resolve problems.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Technologies (S) Pte Ltd’s PDPA and e2i’s PDPA.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Assistant Project Engineer

• Basic: S$ 2,400 - 2,800
• Working Hours: 5 Days Mon-Fri (830am to 530pm)
• Location: Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

[Order Number: 707232-R]

Responsibilities

• Act as the main point of contact between customers and internal teams, ensuring effective communication and timely resolution of technical and maintenance issues.
• Provide hands-on troubleshooting and maintenance for power plant systems, including root cause analysis and resolution of operational and mechanical issues.
• Plan and oversee scheduled and unscheduled maintenance activities, coordinating with customers, technical advisors, and vendors to ensure efficient execution.
• Monitor and report key performance metrics, including reliability, availability, and maintainability (RAM), and present findings and recommendations to customers.
• Identify and mitigate operational risks, support system improvements, and collaborate with remote monitoring hubs and technical support teams to enhance system reliability.

Requirements

• More than 3 years of experience as a Mechanical Maintenance Engineer in the petrochemical or chemical industry.
• Previous site work experience in Long-Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or rotating equipment in industrial plants is preferred.
• Strong troubleshooting skills, with expertise in mechanical systems and components, instrumentation, controls, and plant operational aspects.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Job Descriptions:

• Identify and source suppliers for both direct and indirect materials/services to expand the supplier base and meet new project and production requirements.
• Obtain quotes from newly identified suppliers to determine costs and explore opportunities for cost reduction.
• Lead negotiations with suppliers on a regular basis to ensure competitive pricing for materials and services.
• Participate in supplier qualification audits to ensure compliance with company standards and requirements.
• Evaluate and approve suppliers for inclusion in the approved vendor list.
• Conduct regular performance reviews of suppliers to monitor quality and assess capabilities.
• Maintain and update standard operating procedures for the procurement department to ensure consistent workflow processes.
• Develop and negotiate favorable supply agreements with suppliers to optimize procurement processes.
• Collaborate with other departments and suppliers to establish efficient supply chain models with minimal inventory holdings.
• Work with engineering and warehouse departments to ensure adherence to quality standards for supplied items.
• Provide the sales department with periodic quotation templates for standard products and generate quotations based on customer requirements.
• Complete any additional tasks or projects assigned by management.

Job Requirements:

• Possess a degree in Mechanical Engineering or a Diploma in Mechanical Engineering with 2-3 years of relevant experience.
• Diploma holders should have at least 2 years of experience in sourcing components and fabrication parts.
• Proficiency in Microsoft Word and Excel is essential.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Description:

• Possess the skills to inspect, diagnose, repair, and maintain trucks
• 检查及维修卡车
• General troubleshooting of vehicle according to complain
• 跟据顾客要求检查及解决汽车故障
• Ability to pinpoint parts to be purchased and understand the part list
• 清楚的指出须要更换的零件
• Maintain proper service records on job done and read job orders
• 记录汽车维修及读工作单
• Perform diagnostics and repairs on trucks (mechanical, electrical, and electronic & aircon system replacement).
• 对卡车进行诊断和维修（机械、电气和电子,空调维修）。
• Overhaul power steering, engines, ESCOT gearboxes, rear axles, and emission systems.
• 检修动力转向系统、发动机、ESCOT 变速箱、后轴和排放系统。

Job Qualification (Skills & Requirements):

• Minimum 3 years’ experience 至少3年经验
• Able to understand basic English基本英文
• Able to multitask, prioritize and manage repair job efficiently
• 能够高效地执行多任务、确定优先级并管理维修工作
• Detail-oriented with a strong commitment to providing high-quality work
• 注重细节，坚定致力于提供高质量的工作
• Ability to work both independently and as part of a team 能够独立工作和团队合作
• Physical capability to lift up to 20kg and perform tasks associated with automotive repair
• 具备举起 20 公斤重物并执行与汽车维修相关的任务的身体能力
• At least a Professional Certificate/Nitec in Automotive Technology or a former NTC 2/3 in Motor Vehicle Mechanics.
• 至少拥有汽车技术专业证书/Nitec 或机动车机械师前 NTC 2/3

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Hold a valid, trade appropriate certificate or suitable experience or working knowledge of either Mechanical, Hydraulic, Electrical and Marine systems.

• Be diligent and only use the correct parts and tools when conducting maintenance.

• Maintain a neat and clean working area and workshop.

• Meet all the relevant requirements of IMCA D 001 and hold an up to date Logbook.

• Valid First Aid Certificate.

• Valid in-date Basic Offshore Safety Course, at a recognised training centre.

• Ability to meet deadlines and to prioritise and multi-task.

• Ability to work within a Team and be a trustworthy team member.

• Initiative-taking attitude with high attention to detail.

• Be fluent in spoken and written English.

• Demonstrated good safety record and knowledge of Workplace Health & Safety.

• Successfully complete the Shelf Subsea IMCA-based Competency Assurance and Assessment Program. • Ability to represent the Company in a professional manner.

• Ability to stop the work when witnessing an unsafe act or condition.

Requirements

• Proven experience as Supervisor or similar role
• Organizational and leadership abilities
• Communication and interpersonal skills
• Self-motivated with a results-driven approach
• Problem-solving skills
• Able to work longer hours with prolonged period of standing.
• Must work on weekends/PH.

Responsibilities

• Assessing Vehicle Damage: Evaluating the extent of damage to a vehicle’s body panels, frames, and structures.
• Repairing or Replacing Panels: Fixing dents, scratches, and structural damage by repairing or replacing damaged panels (doors, roofs, bumpers, etc.).
• Welding and Shaping: Using tools to weld, cut, and reshape metal to restore the vehicle's original shape.
• Sanding and Smoothing: Preparing surfaces by sanding and smoothing them for painting.
• Fitting and Aligning Parts: Ensuring that repaired panels and parts are properly aligned and fitted.
• Painting: Sometimes applying primer and working with spray painters to repaint the repaired areas.
• Set daily/weekly/monthly objectives and communicate them to employees
• Organize workflow by assigning responsibilities and preparing schedules
• Oversee and coach employees
• Identify issues in efficiency and suggest improvements
• Enforce strict safety guidelines and company standards

Mechanical system assembly, electrical wiring, I/O test and site installation.

· Provide basic operation training to customer

· Assist in machine repair, service, maintenance & troubleshooting.

· Update progress of given tasks to department head.

· Ensure given tasks complete within given timeline.

· Liase with suppliers, contractors and customers on site installation job.

Requirement

· Minimum Nitec in engineering or equivalent

· Willing to learn and responsible

· Team player who is able to work independently when required.

Basic knowledge in mechanical, electrical system is preferred

Job Description & Requirements

• Plan, conceptualize, and create mechanical designs for new products
• Develop testing processes, and perform testing and validation of new designs
• Generate working prototypes for beta testing and customer demonstration
• Perform engineering calculations to support design work
• Create and review technical drawings, plans, and specifications using computer software
• Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and project stays within budget

• Ensure machines are prepared, set up, and qualified before crating for shipment from the factory to customers.
• Provide occasional on-site service within Singapore and internationally as needed.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996