Responsibility

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

1. Create simple lighting designs for external Design offices/Clients and Sales representative/Sales manager. Lighting designs may include:

• request analyses (availability of all necessary input parameters, if request is in accordance with norms, suggest alternative proposals in accordance with good lighting practise)   
• lighting calculations performed within in house or external lighting software,
• luminaire specifications and descriptions
• elaboration of alternative proposals
• technical application notes (technical reports),
• drawings with luminaire disposition and all necessary details and/or visualizations.

1. Provide simple lighting calculations according to the requirements:

• inputs parameters analyses
• perform lighting calculations and analyses with alternative proposals and/or competitor analyses.

1. Provide necessary support in creation of city lighting reconstruction studies:

• inputs parameters analyses (road geometry, existing lighting installation, road categorization),
• on-site data collection
• determination of typical street profiles in accordance with road geometry and lighting class
• perform lighting calculations and analyses with alternative proposals and/or competitor analyses.

Prepare street lighting categorization proposal, perform lighting calculations and analyses with alternative proposals in cooperation with direct Manager / responsible Sales rep/ Sales manager.

1. Consideration and application of the relevant lighting standards.

1. Develops, implements and/or delivers product training / presentations for Clients (e.g. Ulysse, training, ...).

1. Organize and perform on-site lighting trials and provides after-sales technical support in fine- tuning (e.g. decorative illumination).

Purpose

The Sales Engineer is responsible for driving revenue growth by leveraging technical expertise and sales acumen to promote and sell the company’s products and solutions. This role focuses on identifying customer needs, providing tailored technical solutions, and fostering strong customer relationships. The Sales Engineer acts as a bridge between the company’s technical capabilities and the customer’s requirements, ensuring customer satisfaction while achieving or exceeding sales targets. This position is open to candidates with a range of experience, from junior to senior levels, and may involve managerial responsibilities for more experienced candidates.

Job Duties:

Primary Responsibilities:

• Sales Strategy Execution: Implement and execute sales strategies to meet or exceed assigned revenue and profitability goals.
• Customer Acquisition: Proactively identify and pursue new customer accounts to expand the customer base.
• Sales Presentations & Negotiations: Conduct presentations to customers, negotiate sales contracts, and close deals effectively.
• Market Intelligence: Track market trends, competitor activities, pricing, and new product developments. Provide feedback to the Product Management team.
• Customer Enquiries & Proposals: Address customer inquiries promptly, prepare tailored proposals, and provide quotations.
• Relationship Management: Build, develop, and maintain strong business relationships with customers to ensure repeat business.
• Complaint Resolution: Work with the QA Team to resolve customer complaints and ensure customer satisfaction.
• Market Research & Analysis: Continuously monitor market developments and technological advancements to stay ahead of competition.

Secondary Responsibilities:

• Internal Collaboration: Work closely with the Product Management team to generate RFQs, convert quotations into sales orders, and ensure smooth project execution.
• Sales Reporting: Prepare regular sales reports and track progress against sales targets.
• Team Management (if applicable): Oversee and guide Sales and Customer Service teams to ensure effective sales execution.
• Travel: Willingness to travel internationally for customer visits and business development.
• Industry Knowledge: Maintain awareness of the optics manufacturing industry, its technologies, and market trends.

Experience:

· Proven track record in technical sales with strong communication, presentation, and negotiation skills.

· At least 2-5 years of relevant sales experience. Candidates with 5+ years of experience and demonstrated leadership/managerial skills may be considered for a managerial position.

· Experience in optics or engineering-related fields is a plus.

· Familiarity with market research and the ability to analyse customer needs and translate them into product solutions.

· Proficiency in Microsoft Suite (Excel, Word, PowerPoint) for reporting and communication.

· Ability to work independently and driven to meet sales targets.

· Experience in customer-facing roles and a customer-oriented mindset.

· Factory experience is advantageous.

Qualifications:

• Bachelor’s Degree or Professional Degree/Diploma in Engineering or a related field is required. Candidates with a Master’s or PhD are welcome to apply.
• Experience in industry sales is preferred; experience in precision optics is an advantage.
• A background in engineering is preferred, particularly with knowledge of optics or related technologies.

Other Requirements:

· Fluency in Englishand Mandarin (spoken and written) to communicate with customers in Asia, Europe, and the USA.

· Willingness to work across multiple time zones (Asia, Europe, USA).

· Overseas travel is a must.

KEY COMPETENCIES REQUIRED FOR THE JOB: (Core & Behavioural)

Core Competencies:

• Technical Knowledge: Strong understanding of the company’s product offerings and how they can meet customer needs.
• Sales Excellence: Demonstrated ability to drive sales and achieve targets through effective negotiations and customer relationship management.
• Market Awareness: Ability to track market trends, technological advancements, and competitor activities.

Behavioural Competencies:

• Proactive & Results-Oriented: Demonstrates initiative, works independently, and focuses on achieving business objectives.
• Problem Solving: Quickly resolves customer complaints and issues, ensuring positive outcomes.
• Team Collaboration: Effectively works with internal teams (e.g., Product Management, QA, Customer Service) to meet customer needs and close deals.
• Adaptability: Ability to adapt to changing market conditions and customer demands.
• Strong Work Ethic: Self-motivated, dependable, and committed to achieving personal and team sales goals.

We are representing our client who is a leading provider of power system solutions to customers from various industries not limited to industrial, medical, information technology etc in search of

Electrical Engineer

Responsibilities

• Leading product testing and failure analysis efforts to ensure quality and reliability.

• Conducting hands-on tests on switch mode power supply (SWPS) products, circuits, and components.

• Developing test plans and procedures.

• Designing test systems with software and hardware to achieve test automation.

• Collecting test data, generating test reports, and maintaining good documentation practices.

• Conducting FMEA to identify critical and high-risk electronic designs.

• Performing evaluation tests and risk mitigation.

• Conducting root cause analysis to identify failure mechanisms and derive countermeasures.

• Collaborating with cross-functional teams to sustain the product lifecycle.

Requirement

• Minimum Degree in Electronics/Electrical Engineering or equivalents.

• 5+ years of experience in developing, sustaining, manufacturing, or testing on electronic products, especially power electronics.

• Fundamental knowledge of switch mode power supply – topology, characterization, testing, simulation, safety, and compliance regulations.

• Able to interpret schematics and circuits, understand component functions and analyze their electrical stresses.

• Experienced in qualifying electronic components and systems, understand common processes and methods in electronics design and manufacturing.

• Hand-on skills in environmental testing and test automation, lab equipment and instruments.

• Conversant with EDA tools with Altium highly desirable.

Interested applicants, kindly forward a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required by current employer.

Join us on Telegram here: https://t.me/Searchstaffingjobs

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Assistant Operations Supervisor

Salary: $2, 500 - $3, 500
Working Days: Mon - Friday, 8.30am – 5.15pm
Location: Office - Kwong Min Road (Boon Lay) | Travel to site if required

Operational Support:

• Coordinate and prioritize team activities to ensure smooth operations and timely issue resolution.
• Optimize resource utilization including manpower, equipment, and energy to enhance operational efficiency.
• Prepare comprehensive reports on Preventive Maintenance completion, including details on equipment lifecycle, recommended parts replacement.
• Document any parts that were replaced during PM or on Ad-Hoc Basis
• Update the equipment list monthly during the execution of Preventive Maintenance activities
• Ensure that end-end process of procurement of require Parts for maintenance is ordered.

Customer Relationship Management:

• Assist in maintaining strong relationships with customers, dealers, and distributors.
• Collaborate with the Account Manager in addressing key customer complaints and conducting satisfaction investigations to implement improvement plans.
• Conduct training sessions for technicians, customers, and dealers/distributors on the operation and maintenance of Commercial Kitchen Equipment.

Team Management:

• Assist in training technicians as necessary to meet workload demands and quality standards.
• Supervise and manage a team of service technicians and in-house subcontractors.

Contract Management:

• Support in managing contract commitment in terms of KPI (Critical Equipment Reliability; CM Completion Rate; PM Completion Rate, Emergency Response SLA; Hygiene Audit; Compliance to Fire Safety, WSH, GRA and Security Access Requirement; Service Quality Survey).

Health, Safety, and Compliance:

• Drive EH&S initiatives, promote EHS awareness, and monitor compliance within the team.

Performance Metrics:

• Collaborate with the Account Manager to track and improve KPIs such as productivity, field expenses, and Aftermarket Service Sales revenue/margins.

Job Requirements:

• Diploma in Mechanical/Electrical/Electronic Engineering or equivalent practical experience.
• With experience in a similar supervisory role within Aftermarket Service Industry
• Proficiency in Microsoft Business Central or similar tools.
• With understanding of EH&S standards and practices.
• With experience in conducting training sessions for technicians, customers, and dealers/distributors on Commercial Kitchen Equipment

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Drafter

• Woodlands
• Mondays to Fridays (8:30am to 5:30pm), Alternative Saturdays (8:30am to 1:30pm)
• $3000 - $3500

Responsibilities:

• Prepare Product / Architectural / Mechanical drawings with AutoCAD / Solidworks.
• Work within stated procedures to ensure that design records/controls are maintained.
• Provide product technical support to customers / suppliers.
• Ensure Supplier’s Quality meet our Quality Standard.
• To Initiate / propose / participate in Quality Improvement.
• Take part in new product development.
• Other ad-hoc job assigned by the supervisor.

Requirements:

• Min Degree in Mechanical/Engineering or equivalent.
• Good understanding of Precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Ironmongery industry.
• Minimum 3 to 4 years experience in mechanical field or Ironmongery industry.
• Well verse in Solidworks & AutoCAD Software.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

JOB DESCRIPTION:

• Hands on experience in design, implementation of Splunk architecture.
• Experience on Linux and Windows administration
• Able to do data onboarding, fields extraction according to Splunk best practices.
• Able to provide Splunk guide and Splunk operation document
• Able to setup forwarders and onboard new data sources into the environment.
• Able to troubleshoot and identify Splunk issue relating to performance and searches.
• Able to fine tune Splunk use cases (rule) and optimize searches performance.
• Able to create new dashboard to enhance the visualization of the data and create Splunk use cases for alerts/reports.
• Knowledge on index segregation and user restriction setup
• Knowledge on using Splunk Enterprise Security
• Able to do Common Informational Model for Enterprise Security.
• Good in communication and able to understand the requirements.

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

n the broadest sense, project managers (PMs) are responsible for planning, organizing, and directing the completion of specific projects for an organization while ensuring these projects are on time, on budget, and within scope.

By overseeing complex projects from inception to completion, project managers have the potential to shape an organization’s trajectory, helping to reduce costs, maximize company efficiencies, and increase revenue.

The exact duties of a project manager will depend on their industry, organization, and the types of projects that a PM is tasked with overseeing. But across the board, all project managers share responsibilities across what’s commonly referred to as the “project life cycle,” which consists of five phases (or processes):

• Initiating
• Planning
• Executing
• Monitoring and Controlling
• Closing

• Perform preparation of design specifications
• Incorporate special features which relate to the project at hand into specifications. These include order of work, physical conditions at the site, construction work schedules, method of payment and measurement, construction procedures and special methods, and coordination with contractors and other stakeholders
• Perform technical review on specifications to ensure clarity, completeness, and exactness, and to remove restrictive descriptions so as to ensure competitive bidding
• Prepare project for advertisement by compiling contract specification into Electronic Bid Set (EBS)
• Visit proposed project site to obtain necessary information for use in creating project specification. This include condition and location of project site, location of storage and staging areas, and character and scope of work
• Provide guidance and technical advice to various persons and departments, including engineering personnel, Branch Chief, Section Chief, Engineering and Construction Department, and Architect-Engineer firms where necessary to develop basic specification procedure and policies to cover new types of projects and structures, and to make clearer various phases of the construction work
• Communicate with higher authorities on issues concerning specifications, engineering interpretations and explanations, supply of items, and items of work, and offer recommendations on reviewing specifications.

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

• AUTO CAD Drafting for building & Steel Plate NESTING.
• Have a good knowledge in CAD MATIC.
• Preparing Engineering Drawings and steel weight checking.
• QA / QC Document controller.
• Have a good knowledge in M.S OFFICE.
• Material taking off for fabrication.(MTO)
• -Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and specifications.

• Coordinate with the clients for whatever revision on drawings and in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with Project

Team for smoothing the work progress.

.Office Administrator works

Responsibilities

- To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labourforce and the work of any subcontractors

- Liaising with local authorities, client's representatives, sub-contractors and consultants.

- Checking and ensuring all plans and work are as per specifications

- Resolving any technical difficulties and problem that may arise on site.

Requirements

- Degree holder in Construction/Building or related discipline.

- Minimum 2years experience from Contruction background.

- Positive personality and good team player.

- Meticulous and responsible.

- Able to multi task and work in tight schedules.

- Able to start with short notice would be an advantage,

Main duties:

• Instrumentation team profile selection.
• Instrumentation works follow-up, correcting deviations with respect to the foreseen schedule.
• Instrumentation progress reporting.
• Interface with the Client
• Identification and assessment of client requirements out of scope.
• Works assignment within the instrumentation team.
• Co-ordination with other design disciplines,scheduling, cost control, Procurement and TR project management.
• Meetings with suppliers.
• Revision and approval of all instrumentation documents.

Main requirements:

• At least 5 years of experience in the same position in oil and gas projects.
• Enforcing obedience to Safety and Environment regulations, reviewing safety and environment manuals. Ensuring operational readiness off all emergency equipment in the Contractor.
• Knowledge of drafting tools: AutoCAD, uStation
• Experience in Fieldbus design
• Experience in DCS/ESD/F&G specifications.
• Knowledge of Process design.
• Knowledge of up-to-date instrumentation technologies and suppliers
• Proven experience in detail engineering of industrial plants.
• Intools expert user.
• Experience and understanding the EHS requirements

Working Place: Jurong Island

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Coordinate with the engineering team and provide detailed drawings for installation

Updating layout, panel drawings for approval and as-built submissions.

Other ad-hoc duties that may be assigned from time to time

At least 5 years working experience in the construction industry （Electrical Works )

Basic knowledge on MEP construction works

Experienced with AutoCAD software

Chinese speaking preferred

JOB DESCRIPTION (ROLES AND RESPONSIBILITIES)

• Perform route mapping and navigation testing
• Assists in setting up the servers and other peripherals needed for robot operations
• Execute hardware and system upgrade or modification
• Provide technical support to the Service Team for Tier 3 - Software and System issues whenever necessary
• Conduct training to the Product Operators and Service Team for the newly setup system, equipping them with product operations and basic troubleshooting knowledge
• Coordinates with stakeholders, ensuring effective communication and providing regular progress reports
• Escalate higher level issue whenever necessary
• Prepare and submit relevant Operations documents as needed
• Execute ad hoc tasks on behalf of the Robotics Operations Team as needed

SKILLS AND QUALIFICATIONS

• Diploma, Bachelor’s or Associate’s degree in Mechanical/Electrical/Computer Engineering or other related fields
• Proven relevant work experience of at least 2 years
• Strong background in Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)
• Familiarity in mechanical/electrical hardware installation, setup and troubleshooting
• Familiarity in system/network installation, setup and troubleshooting
• Familiarity in AutoCAD, ElcoCAD and any other design and planning software
• Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage
• Ability to read and interpret mechanical / electrical prints and other related technical documentation
• Strong working knowledge of equipment, tools and components used in the industry
• Proficiency in using computers and basic applications such as MS Word, Excel and Powerpoint
• Ability to work independently and remain professional under pressure
• Ability to clearly communicate with colleagues and end users

ADDITIONAL REQUIREMENT

• Willing to travel locally in a short notice
• Comfortable to work overtime as needed
• Willing to be deployed overseas as needed

Work closely with project managers and stakeholders to coordinate project resources and information, ensuring that the project requirements are met. As a Project Engineer (PE) you will be responsible for working across multiple teams while executing project plans and revising as appropriate to meet changing needs and requirements.

Project Tasks

• Discipline in detailed documentation and reporting of projects plan, project status and issue logs.
• Identify and schedules customer-facing meetings to assure effective completion of projects Manages day-to-day operational aspects of a project schedule.
• To assist in install, setup, testing and provide technical support for the product installation team.
• Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Review technical documentation of projects and implementations as well as service deliverables.
• Manage customer relations by fostering productive and effective relationships with business users.
• Timely escalation of critical situations and any likely project risk that can impact project delivery scheduled to Manager.
• Effectively and accurately set client expectations and deliverables.
• Write documents describing functional specifications, protocols, test cases and maintenance guidelines for medical equipment.
• Keep documentation of implementation on all medical equipment.

Requirements

• At least 4 years of experience working in the IT industry, preferably involved in project delivery adopting SDL
• Familiar with Networking, Microsoft Operating System and SQL Server
• Relevant experience or interest in project management will be highly advantageous
• Excellent communication skills (both written and verbal) and interpersonal skills
• Great attention to details and results-oriented
• Ability to influence and present to the leadership team
• Committed to the values of integrity, accountability, transparency, scientific rigor and drive
• Good verbal and written communication skills

Job Description:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Good verbal and written communication and presentation skills.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Ability to analyse, solve problems and decision making.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Ding Xin Er

EA Personnel Reg No: R22106669

Key Duties:

• Assist Managers in Mechanical engineering projects of various sizes and complexity
• Assist Managers in managing a team to ensure cost effective, safe and timely completion of projects
• Co-manage project activities throughout lifecycle, including the allocation of adequate resources, documentation and other factors necessary for success
• Prepare and review specification and concept reports
• Utilising expertise to guide and train staff
• Provide quality and cost control during the design and construction process
• Maintain project schedules and project cost summaries to track work progress, budget status, and manpower resource utilization.
• Escalate and identify the need for additional services and fees.
• Assist with Shop drawing reviews as required.

Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Well Established Company
• Basic $5000 - $8000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working days: Monday to Friday
• Working hours: 8am to 5pm

Job Responsibilities:

• Develop and implement department procedures, ensuring compliance with safety regulations and standards
• Oversee and coordinate the daily engineering operations, including conducting routine inspections and maintenance of machinery
• Manage the maintenance budget, ensuring efficient allocation of resources
• Supervise engineering staff, including hiring, training, and performance management
• Prepare preventative and maintenance schedules
• Identify and address potential issues before they result in equipment failure or downtime
• Collaborate with other departments to prioritize maintenance needs and manage work orders
• Manage inventory of maintenance equipment
• Prepare and present reports on maintenance operations and costs
• Keep abreast of advancements in maintenance and repair technologies

Requirements:

• Bachelor’s degree in Mechanical Engineering
• Min 5 years of relevant working experience and knowledge
• Strong planning, people management, analytical and problem solving skills

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Reports to Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team

Job Responsibilities

• Assist and support Project Manager in handling and monitoring of smooth progress of project.
• Attending site walks, inspections, meetings and preparing of monthly reports and submissions.
• Coordinate and liaise with relevant parties to ensure smooth project implementation.
• To ensure and carried out site work in accordance to construction programme safely.
• Ensure supervisors and workers carry out daily site works accordingly with safety rules and regulations being observed.
• Must be familiar with all roads, drainage, sewers and all other infrastructure construction.
• To carry out all site works issues and ad-hoc duties when instructed.

Requirements

• Candidate must possess Bachelor’s degree in Civil Engineering (RE Recognised)
• Candidate to possess relevant certificates and Building Construction Supervisors Safety Course Certificate (BCSS)
• At least 3 years of working experience in the related field
• Preferably with Class 3 Driving Licence
• Good communication, self-initiative and interpersonal skills