Responsibilities :-

- To supervise & ensure works are in accordance to the contract drawings & specifications

- To inspect & ensure that the ACMV installation works are executed within acceptable standard of workmanship

- To monitor the installation progress as well as coordination with Client, Consultants & vendors to ensure efficient & timely delivery of assignment

- Prepare & submit site progress reports & other necessary project documentation

- Assist in the preparation of progress payment claims & variation orders where required

- Responsible for testing & commissioning of ACMV systems

- Attend safety, technical & daily site progress meetings

- Conduct site inspection with relevant parties to resolve technical/site issues

- Ensure timely handover of project

- Other project-related tasks as deemed necessary

Requirements :-

- Diploma/Degree in Mechanical Engineering or equivalent

- Min.2 years of working experience in construction industry

- Having experience in Wafer fab or pharmaceutical will be an added advantage

- In-depth knowledge of project management principles

- Able to work independently with minimal supervision

- Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking site workers, subcons/vendors

- Singaporean or Singapore PR preferred

Job Description

• Review project specifications and technical clarifications
• Prepare method statements and check drawing discrepancies
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Supervise the M&E works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Coordinate with other trades to ensure smooth work progress
• Ensure all M&E works are compliance with all necessary standards, code of practice and safety regulations
• Attend all the meeting as and when required
• Temporary M&E works (eg: site office, trial holes, temp power supply etc)
• Any other duties assigned by the Management

Job Requirement

• Diploma/Degree in Mechanical or Electrical Engineering or equivalent
• Min 5 years experience in Construction Industry
• Good communication skills and ability to work independently
• AutoCAD & Revit Certificate

Roles & Responsibilities

The responsibility of this position is to lead the project assigned to successful completion within the project schedule & scope as well as obtain the targeted profit and achieve high customer satisfaction.

The incumbent shall carry out the following responsibilities, but not limited to:

• Resolve complex issues with clients & consultants, JV partners, and/or sub-contractors which are not able to be handled by subordinates.
• Direct project team members to achieve targets of safety, quality, profit and timely completion of the project. To monitor the progress of the project according to the targets set.
• Identify key staff to lead the project and delegate responsibilities. Provide guidance and direction to staff for them to work towards the targets set.
• Personnel management and development.
• Oversee the tender works including providing directions on planning, construction technique, quality of tender submission documents, risk and issue management, tender price negotiation with suppliers and subcons for finalization.

Requirements:

• Candidate must possess at least a Bachelor's Degree majored in Civil Engineering recognised
• Minimum 6 years of local experience in construction industry
• Experience in Road Works / Building Works Project will be preferred
• Proven working experience in project management
• Excellent client-facing and internal communication skills
• Independent and organised with positive work attitude
• Possess strong written
• Good decision maker and team player
• Auto Cad designing
• Class 4 with Forklift licence

Responsibilities:

• Analyse project/business needs and necessary technical requirements, activities and employees, monitor planning continuously and take corrective measures if necessary.
• Coordinate the different technical activities (conceptual design, built, mobilisation, commission, maintenance and repair) in own focus area.
• Prepare and request budget for technical activities (based on detailed specifications), manage actuals and present views.
• Ensure conceptual, basic and detailed design is executed according to needs defined and in accordance with compliance regulations.
• Write technical specifications to workshops/shipyards, suppliers and service providers for technical asset production, repair and/or maintenance, evaluate proposals and decide on parties, in accordance with Technical Specifications and in agreement with Technical Manager, draft contract/PO and ensure execution/delivery according to these agreements.
• Have relevant expertise in the technical field, keep up with relevant developments in the own area and related areas of expertise and contribute to the (technical) field by developing new, state of the art knowledge and exchanging knowledge with colleagues.

Requirements:

• Relevant tertiary qualifications/Degree/Diploma/Master in Science or Engineering (or equivalent knowledge and experience)
• With minimum 7 years of relevant work experience
• Meticulous, organised and attentive to details in the midst of a fast-paced environment
• Analytical and problem-solving skills
• Excellent verbal and written communication skills in English
• Proficiency in MS Excel and IT skills

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Job Summary:

We are seeking an Assistant Project Manager with a background in mechanical engineering and project management, preferably from the contractor industry, to join our team for an LTA project. The role involves assisting the Project Manager in overseeing project execution, ensuring technical accuracy, maintaining schedules, and delivering high-quality outcomes within budget.

Key Responsibilities:

• Assist in managing mechanical engineering projects of varying sizes and complexities.
• Analyze customer design proposals and specifications to determine cost-effective solutions.
• Ensure professional quality standards across all facets of project work.
• Support the Project Manager in leading project teams to ensure technical accuracy and adherence to timelines.
• Oversee the allocation of resources, documentation, and activities throughout the project lifecycle.
• Collaborate with clients to deliver high-quality project outcomes.
• Prepare and review project specifications and concept reports.
• Maintain and strengthen client relationships while identifying opportunities for business growth.
• Mentor technical staff and assign duties as required.
• Monitor quality and cost control during the design and construction phases.
• Track project schedules, budget status, and resource utilization.
• Identify and escalate the need for additional services and fees when necessary.
• Review and approve shop drawings and other project deliverables.

Requirements:

• Degree in Mechanical Engineering or related field.
• Proven experience in mechanical engineering projects, with a preference for candidates from the contractor industry.
• Strong project management skills with the ability to multitask and meet deadlines.
• Excellent client-facing skills and the ability to maintain professional relationships.
• Familiarity with LTA projects and requirements is an advantage.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with

Responsibilities:

• Responsible to lead a team of M&E personnels.
• Acquire approval scope of works and ensuring compliance with regulations and project requirements.
• Oversee and manage all aspects of the construction M&E works process.
• In-depth understanding of project specifications, technical details and construction drawings.
• Monitor and ensure that site progress is in accordance with the master program with no delay in works and proper work sequencing.
• Attend site meetings with the client and all sub-contractors to review project progress.
• Monitor and report project details including progress, risks and resolve MEP-related issues in a timely manner.
• Define clear roles & responsibilities and deliverable requirements in terms of both scope and schedule to all project personnel.
• Lead and supervise project personnel on site to ensure construction activities are carry out effectively and timely.
• Assist to the Project Director and any other job-related ad hoc duties.

Requirements:

• Candidate must possess at least Diploma/Degree in Mechanical Engineering or equivalent.
• Proficient technical knowledge - measurement, cost estimating, construction technology, contracts and law.
• Understand and be competent with professional practice and contract administration processes.
• Required language(s): English
• At least 3 Year(s) of working experience in the related field is required for this position.
• Self-motivated with good team player and positive attitude.
  

Employer questions
Your application will include the following questions:

• Which of the following statements best describes your right to work in Singapore?
• What's your expected monthly basic salary?
• How many years' experience do you have as an Electrical Project Manager?
• Which of the following Microsoft Office products are you experienced with?
• How many years' experience do you have in the construction industry?
• Which of the following languages are you fluent in?
• Are you available to work on weekends or public holidays?

• To assist the Professional Engineers and Mechanical Engineers to design and draft in 2D/3D or AutoCAD/BIM M&E systems of buildings (Electrical, Fire Protection, ACMV, Pumbling & Sanitary systems).
• Identify and resolve coordination/interface issues with project engineers, subconsultants, contractors and clients.
• Experience with AutoCAD, and Revit MEP.

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 10 years working experience on related sites

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

KEY ROLES AND RESPONSIBILITIES

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources.
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure.
• Plan and review the budget for the Cost Centers assigned to them
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all stakeholders in the maintenance work.
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements.
• Assist in maintenance related projects to improve workflow and maintenance processes
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

QUALIFICATIONS & EXPERIENCE

• Degree in Mechanical engineering
• Minimum 3 to 5 years’ experience in a Power Plant environment or oil & gas industry.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Salary: $3,400 - $3,800

Location: Ang Mo Kio/Yio Chu Kang

Key Responsibilities:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects and contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Key Requirement:

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• 3 - 5 years experienced
• Experienced in ACMV & LTA/SMRT
• Soft skills including a positive attitude, flexibility and conflict resolution

WhatsApp me wa.me/6585125305 for a prompt response to your enquiry!

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please by notified that only shortlisted candidates will be informed.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Diploma in Mechanical/Electrical Engineering
• Experience working in machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc)

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Be involved in the planning of civil engineering works.

· To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

· Any ad-hoc duties as assigned by the Manager.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

· The Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

. Flexible working hours

Engineer

Job Summary

Our growing company in Fire Protection Systems is seeking to hire an Engineer for our ongoing and upcoming projects.

This task involves the installation of Fire Protection System, arrangement of team members to complete the installation in accordance to approved drawings and ensuring that project deadlines are met in a timely manner.

Job Descriptions:

· Installation of Fire Alarm System equipment.

Requirements:

Candidate must possess Engineering Degree or equivalent

Proficient in Microsoft Office

Minimum 2 years experience

Ability to work effectively both independently and as part of a team. Ability to read, understand and execute work according to drawings. Ability to work on tight deadlines.

Be involved in the planning of civil engineering works.

· To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

· Any ad-hoc duties as assigned by the Manager.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

· The Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

. Flexible working hours

Job Description

Perform mechnical & piping design review, technical agreement review and other engineering related matters for new building and conversion projects

Job Requirements or Responsibilities

• To support project in addresings engineering issues involving designers and classifications.
• To perform TA review in accordance with the contractual requirement and review schedule.
• To conduct an integration meeting involving pertinent parties for the purpose of design integration.
• To scrutinize all drawings received from supplier and designers, and provide comment as per contractual requirements, rules & regulations and operational practice

Our culture believes in Powering Your Potential . We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems.

We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about.

We are looking for a talented Lead Technician - Mechanical to join our team based in Tuas, Singapore. This is an Onsite role reporting to the Service operation Manager. This role will also require travelling within Singapore. Reporting to the Service Supervisor, this role provides support for all Cummins products, primarily in Automotive, Industrial and Marine applications, in a combination of workshop and field work. You will respond to engine breakdowns and provide technical analysis of failure, warranty support and troubleshooting engineering issues. Previous experience in a similar Service role, and knowledge of High-Speed Diesel engines, is essential.

This position offers a long-term career with a global organisation in the power industry and could be the next step in your successful Service career.

In this role, you will make an impact in the following ways:

Responsibilities:

• Establishes and continually develops productive customer relations and ensures prompt and efficient attention to customer needs.
• Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete complex repairs at customer site.
• Performs preventative maintenance activities as per documented schedules and standards on engines and related components in the field.
• Escalates unresolved issues to product specialists or supervisor.
• Coaches and develops technicians and/or apprentices and transfers knowledge and experience to others; may provide work direction; may review repair plans, parts lists, etc.
• Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.
• Identifies additional sales and service opportunities with customer. Completes training in line with skill and business requirements.
• Maintains service vehicle and tools for cleanliness and proper operation.
• Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor.

RESPONSIBILITIES

To be successful in this role you will need the following:

• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Customer focus - Building strong customer relationships and delivering customer-centric solutions.
• Develops talent - Developing people to meet both their career goals and the organization’s goals.
• Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.
• Manages conflict - Handling conflict situations effectively, with a minimum of noise.
• Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
• Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
• Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
• Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
• Engine Systems Interactions - Interprets and analyzes the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.
• Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
• Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
• Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
• Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

QUALIFICATIONS

Education, Licenses, Certifications:

• Trained Engine Technician (Preferred)
• Vocational diploma from relevant technical institution
• Locally valid driving permit, Class 3 and above This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

• Significant field service work experience
• Expert level knowledge of and/or experience with engine products
• Customer service experience
• Experience providing technical advice and coaching to more junior technicians (preferred)
• Able to write and speak in English language
• Preferably with experience in internal combustion engines
• Experience in Marine environment will be advantageous
• No cross-border relocation provided.
• Team leading experience, 3+ years required.

Job Description:

We are seeking a highly motivated Mechanical & Electrical Coordinator to join our team, specializing in fire alarm and sprinkler systems. In this role, you will be responsible for coordinating all aspects of fire protection systems within mechanical and electrical projects.

Key responsibilities include:

Manage project documentation and ensure accurate records for fire alarm and sprinkler systems.

Create detailed AutoCAD drawings from scratch to completion, specific to fire protection systems.

Prepare cost estimates and manage budgets, ensuring project financials are aligned with company goals.

Conduct site inspections to monitor fire protection systems' installation, ensuring adherence to safety and compliance standards.

Coordinate both commercial and residential fire alarm and sprinkler projects, delivering high-quality service.

Assist with LEW (Licensed Electrical Worker) testing and ensure compliance with all regulatory requirements.

Understand client needs and clearly communicate project scope, especially in the context of fire protection systems.

Collaborate closely with project managers and engineers to guarantee seamless integration of fire protection systems within broader mechanical and electrical projects.

Ensure compliance with the Singapore BCA Code of Practice for Electrical and Mechanical systems.

Requirements:

Diploma/Degree in Mechanical or Electrical Engineering or a related field.

Proficiency in AutoCAD with a focus on fire alarm and sprinkler system designs.

Strong understanding of fire protection systems, along with general mechanical and electrical systems.

Experience in project costing and budget management, specifically for fire alarm and sprinkler systems.

Excellent communication skills to liaise with clients and project teams.

Ability to manage multiple projects and maintain strong organizational control.

Willingness to visit job sites regularly for inspections and coordination.

Class 3 driving license is an added advantage.

We will take 4 to 5 working days to evaluate the candidates. Only shortlisted candidates will be notified. If you do not receive a call or email within this time frame, we encourage you to explore other opportunities.
License No: R1102109 | Arasu

• Responsible for installing, maintaining, and repairing electrical equipment and systems to ensure proper operation.
• Conduct regular inspections of electrical systems, troubleshoot faults, and perform necessary repairs.
• Address technical issues related to electrical systems and equipment, providing on-site technical support.
• Identify root causes of failures, implement corrective actions, and ensure issues are fully resolved.
• Ensure all electrical services and installations comply with approved specifications, standards, design drawings, and safety regulations.
• Enforce strict quality control procedures to ensure project requirements are met.
• Coordinate day-to-day activities with other specialty contractors and construction teams to resolve site conflicts and issues.
• Participate in commissioning and testing of electrical systems to ensure equipment functions as intended.

Responsibilities

• Attends and conducts daily tool box briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Ensures sub-contractors carry out the work as planned.
• Evaluate project to identify issues and opportunities to improve performance
• Ensures good co-ordination and communication between stakeholders.
• Maintains System & Sub System Mark-up Drawings.
• Ensures to follow-up Overall Commissioning and Completion Documentation.
• Creates Punch List, Updating and closing in PIMS.
• Prepares & follow up for signing Mechanical Completion Dossier (MC),signing (By Client) System Completion Dossier (SCD).
• Coordinates and arranges Tri Party Walk down, Discipline Completion Walk down (DCC) & Mechanical Completion Walk down (MC Walk down).
• Follow ups of completion hand over certificates.

Requirements

• Knowledge in PIMS - Omega365 and ProCo System
• A pass in shipyard supervisor safety course.
• 5 years of relevant working experience in construction of offshore platform industry.
• Must be a team player & be able to work closely with other discipline supervisors.
• Willing to work late hours and rotating day or night shift

Our Address and Working Hours

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

We are seeking an experienced Mechanical Technician to perform technical maintenance and repair operations on marine vessels at Singapore Anchorage, PSA Terminal, shipyards, our workshop, and on overseas assignments when required.

Key Responsibilities:

• Carry out mechanical repairs and maintenance on vessels.
• Replace or repair mechanical spare parts as needed.
• Provide technical services, including equipment installation, troubleshooting, and system overhauls.
• Adhere to industry regulations and company procedures to ensure safety and compliance.
• Work independently to organize and complete assigned tasks.
• Prepare detailed service reports and recommendations following company guidelines.
• Assist with other technical duties and ad-hoc assignments as directed by supervisors.

Requirements:

• Diploma in Mechanical/Electrical Engineering (Fresh graduates are encouraged to apply, training provided).
• Flexibility to work on weekends and public holidays when required.
• Strong team player with the ability to work independently when needed.
• Valid Class 3 driving license is a plus.