Job Description:

• Possess the skills to inspect, diagnose, repair, and maintain trucks
• 检查及维修卡车
• General troubleshooting of vehicle according to complain
• 跟据顾客要求检查及解决汽车故障
• Ability to pinpoint parts to be purchased and understand the part list
• 清楚的指出须要更换的零件
• Maintain proper service records on job done and read job orders
• 记录汽车维修及读工作单
• Perform diagnostics and repairs on trucks (mechanical, electrical, and electronic & aircon system replacement).
• 对卡车进行诊断和维修（机械、电气和电子,空调维修）。
• Overhaul power steering, engines, ESCOT gearboxes, rear axles, and emission systems.
• 检修动力转向系统、发动机、ESCOT 变速箱、后轴和排放系统。

Job Qualification (Skills & Requirements):

• Minimum 3 years’ experience 至少3年经验
• Able to understand basic English基本英文
• Able to multitask, prioritize and manage repair job efficiently
• 能够高效地执行多任务、确定优先级并管理维修工作
• Detail-oriented with a strong commitment to providing high-quality work
• 注重细节，坚定致力于提供高质量的工作
• Ability to work both independently and as part of a team 能够独立工作和团队合作
• Physical capability to lift up to 20kg and perform tasks associated with automotive repair
• 具备举起 20 公斤重物并执行与汽车维修相关的任务的身体能力
• At least a Professional Certificate/Nitec in Automotive Technology or a former NTC 2/3 in Motor Vehicle Mechanics.
• 至少拥有汽车技术专业证书/Nitec 或机动车机械师前 NTC 2/3

We are looking for a Mechanical Engineerto assist in site supervision and coordination of ACMV systems for a construction project. Key duties include overseeing project execution, managing progress, coordinating with stakeholders, and ensuring quality control.

Responsibilities:

• Assist in ACMV system installation and commissioning.
• Coordinate project planning, materials, and manpower.
• Supervise subcontractors and monitor work progress.
• Conduct site inspections and ensure compliance with standards.
• Prepare reports and documentation as required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 1-5 years of relevant experience in construction projects (ACMV systems preferred).
• Good communication skills and project management knowledge.
• Experience in wafer fabs or pharmaceuticals is a plus.

Hold a valid, trade appropriate certificate or suitable experience or working knowledge of either Mechanical, Hydraulic, Electrical and Marine systems.

• Be diligent and only use the correct parts and tools when conducting maintenance.

• Maintain a neat and clean working area and workshop.

• Meet all the relevant requirements of IMCA D 001 and hold an up to date Logbook.

• Valid First Aid Certificate.

• Valid in-date Basic Offshore Safety Course, at a recognised training centre.

• Ability to meet deadlines and to prioritise and multi-task.

• Ability to work within a Team and be a trustworthy team member.

• Initiative-taking attitude with high attention to detail.

• Be fluent in spoken and written English.

• Demonstrated good safety record and knowledge of Workplace Health & Safety.

• Successfully complete the Shelf Subsea IMCA-based Competency Assurance and Assessment Program. • Ability to represent the Company in a professional manner.

• Ability to stop the work when witnessing an unsafe act or condition.

Requirements

• Proven experience as Supervisor or similar role
• Organizational and leadership abilities
• Communication and interpersonal skills
• Self-motivated with a results-driven approach
• Problem-solving skills
• Able to work longer hours with prolonged period of standing.
• Must work on weekends/PH.

Responsibilities

• Assessing Vehicle Damage: Evaluating the extent of damage to a vehicle’s body panels, frames, and structures.
• Repairing or Replacing Panels: Fixing dents, scratches, and structural damage by repairing or replacing damaged panels (doors, roofs, bumpers, etc.).
• Welding and Shaping: Using tools to weld, cut, and reshape metal to restore the vehicle's original shape.
• Sanding and Smoothing: Preparing surfaces by sanding and smoothing them for painting.
• Fitting and Aligning Parts: Ensuring that repaired panels and parts are properly aligned and fitted.
• Painting: Sometimes applying primer and working with spray painters to repaint the repaired areas.
• Set daily/weekly/monthly objectives and communicate them to employees
• Organize workflow by assigning responsibilities and preparing schedules
• Oversee and coach employees
• Identify issues in efficiency and suggest improvements
• Enforce strict safety guidelines and company standards

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities / Job Description

• Inspect, troubleshoot and fix running equipment as necessary;
• Supervision during tunnelling and dismantling
• Responsible for on-site technical and engineering matters
• Control/monitoring work progress
• Ensure compliance to WSHA, safe work procedure and maintain good house-keeping
• Duties assigned by the M&E Superintendent
• Assist the Mechanical/ Electrical and Operations Staff to target minimal downtime of the TBM

Requirements

• Able to work shift work, 6 day work week
• Preferably 5 years or more experience in LTA Tunnelling project
• 10 years of relevant working experience in the construction field
• Possess relevant trade foreman certificate, NCC, BCSS etc

Job description:

• Dealing with Excavator, Prime Mover, Reach stacker, & forklift problems and repair
• Troubleshooting electrical & mechanical components & inspecting vehicle engine
• Replacing & repairing malfunction parts & potential leaking
• Understanding vehicle diagnostic systems & functions
• Repair experience in excavator, forklift & prime mover, etc

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Assistant Project Engineer

• Basic: S$ 2,400 - 2,800
• Working Hours: 5 Days Mon-Fri (830am to 530pm)
• Location: Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Taking the conceptual design through to implementation and handover.
• Ensuring sustainability targets are incorporated into the design.
• Producing the tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates.
• Progressing the design following the Design Checklist.
• Chairing Sub-contractor progress meetings.
• Chairing Mechanical Department Client weekly Meetings.
• Liaising with Quality Assurance / Quality Compliance Engineers to ensure they are aligned with the requirements of the specification.
• Mentoring an Engineer with the intent of securing properly trained personnel to ensure the continual expansion of the company.
• Ensuring each System Supervisor is provided with the current and applicable shop and space management drawings.

Qualifications:

• Bachelor of Science or Bachelor of Engineering (Hons.) Degree in Mechanical Engineering or an appropriate field
• Having 6 - 8 years of relevant experience with design experience desired
• Experience with design and construction preferably in industrial buildings.
• Technically competent across the full range of Mechanical Systems.
• Experience in Industrial projects such as microelectronics, pharmaceuticals, and semiconductors is an added advantage.
• Building servicing system – plumbing and sanitary, fire protection (sprinkler, hose reel, hydrant), ACMV, HVAC systems.

Job Scope:

1. Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

1. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them
2. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.
3. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Qualification:

1. Strong knowledge of M&E details, working drawings and local construction practices
2. Conversant with local codes and regulations
3. Is a good team player and is analytical and a problem solver
4. Excellent in communication skills, both verbal and writing skills, with a high level of attention to detail
5. Strong interpersonal skills, ability to develop relationships and communicate with all levels of management
6. Proficient Microsoft Office and other IT software

Roles & Responsobilities:

The executive engineer is responsible for the design, diagnostic, testing as well as repair and overhaul of mechanical, electrical and electronic components of the chillers and other related systems in support of our overall chiller manufacturing process. The engineer shall be required to independently plan, schedule, coordinate and optimize on-site and workshop activities and coordinate with the sales and marketing team where required.

Key Responsibilities:

Design, diagnose, test as well as repair and overhaul mechanical, electrical and electronic components of the chillers and other related systems

Spearhead digitization of existing chillers through selection, adoption and/or redesign of PCB & PLCs

Coordinate and liaise with internal production, sales & marketing team as well as external end customers, contractors and consultants on-site

Supervise and check suppliers’ works and/ or end customer requirements according to design drawings, specifications and regulation (local codes or relevant international design codes)

Check and ensure the equipment and material offered in compliance with the specification and drawings.

Generate engineering & electrical drawings with Autocad software

Perform all other duties as assigned and required.

Requirements:

Candidate must possess at least Diploma in Engineering (Electrical/Mechanical) or equivalent.

At least 2 -3 year(s) of working experience in Electrical/Mechanical related fields is required for this position

Required Skill(s): Autocad, Microsoft Office

Licensed Electrical Engineer OR Licensed Electrical Technician is a bonus

Required Spoken and Written Language(s): English, Mandarin

Preferably with class 3 driving license

Working Hours : Mon to Fri (8.00 am to 5.00pm) & Sat (8.00am to 3.00pm)

If you are keen to join Group of Weeseng, contact us at 6245 2712 or email to

finance@ weeseng.com

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning and follow up all new and retrofit projects of Sterile filling for the manufacturing site

· Responsible for development of SOPs, quality standard, development, and execution of Qualification protocols with following site QMS procedures.

· Responsible for managing a team of vendors / contractors.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensuring best available technologies are incorporated by design.

· Delivering the project within the budget and timeline approved.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure to maintain the highest standards for cGMP requirements for the manufacturing site.

· Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready all the time.

· Achieve financial objectives through efficient project management.
Qualifications

Education:

· Bachelor’s / master’s degree in mechanical engineering or equivalent.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Responsibilities

• Develop and design mechanical systems and components for machine automation projects.
• Utilize CAD software to create 3D models, assemblies, and detailed drawings.
• Work with the team to ensure designs meet project requirements and standards.
• Assist on various projects consisting of the design, fabrication, and modification of components.
• Coordinate with fabrication house and component suppliers.
• Assist in assembling, installing, and completing the design work in which you were involved.
• Involve in design reviews, troubleshooting, and continuous improvement efforts.
• Perform all given tasks within given time.
• Be committed and responsible.
• Any other duties as assigned.

Requirements / Qualifications

• Diploma / Degree in Mechanical/Mechatronics Engineering or relevant technical discipline.
• Fresh graduates are welcome to apply (Must be willing to learn).
• Candidates with automation background only.
• Proficient in designing and drafting using 3D CAD software.
• Proficient with Microsoft Office.
• Good communication skills.
• Able to start immediately.

Responsibilities:

• Liaise and work closely with the consultant, clients and subcontractors on the progress of M&E work to meet the project schedule.
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Prepare correspondence reports, suggesting corrective actions or value added recommendations according to best practice when applicable,
• Responsible for keeping daily work record, including additional work claim to the clients and from the subcontracts.
• Other ad-hoc duties when assigned

Requirements:

• Min Diploma / Degree in Mechanical Engineering with ACMV, Electrical, Plumbing/Sanitary Services, Fire Protection background.
• Min 3 years working experienced and equipped with knowledge in M&E Services (Especially Machanical, ACMV, Electrical, Plumbing/Sanitary Services, Fire Protection) in the related field is required for this position.
• Knowledge of BIM or AutoCAD added Advantage
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines.

Job Responsibilities

• To support the construction team for M&E engineering works.
• Planning/scheduling and coordination of M&E works.
• Project coordination, supervision, and monitoring of the progress of site work.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Ensure quality work in order to achieve CONQUAS and/or QM requirements
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree in Mechanical & Electrical Engineering or related fields. PE Board recognized degree is preferred.
• Minimum 8 years of relevant experience in the construction industry for senior role.
• Proficient in Autodesk Revit or BIM software.

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Mechanical system assembly, electrical wiring, I/O test and site installation.

· Provide basic operation training to customer

· Assist in machine repair, service, maintenance & troubleshooting.

· Update progress of given tasks to department head.

· Ensure given tasks complete within given timeline.

· Liase with suppliers, contractors and customers on site installation job.

Requirement

· Minimum Nitec in engineering or equivalent

· Willing to learn and responsible

· Team player who is able to work independently when required.

Basic knowledge in mechanical, electrical system is preferred

• Ensure machines are prepared, set up, and qualified before crating for shipment from the factory to customers.
• Provide occasional on-site service within Singapore and internationally as needed.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• Liaise and work closely with the Main contractors on the planning and progress of M&E work to meet the project schedule.
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Prepare correspondence reports, suggesting corrective actions or value-added recommendations according to best practice when applicable,
• Responsible for keeping daily work record, including additional work claim to the clients.
• Other ad-hoc duties when assigned

Requirements:

• Background in M&E works. Diploma or degree in Civil/Mechanical Engineering is a plus.
• Min 10 years working experience and equipped with knowledge in M&E in a construction industry
• Be able to work independently and in a team
• 6 days work week and shift work during critical phase.

Job Scope:

• Design and develop mechanical and electrical systems for buildings and infrastructure
• Conduct feasibility studies and cost estimates for M&E projects
• Collaborate with architects, engineers, and contractors to ensure project alignment
• Prepare technical specifications and project documentation
• Supervise installation, testing, and commissioning of M&E systems
• Ensure compliance with relevant codes, standards, and regulations
• Perform site inspections and quality assurance checks
• Troubleshoot and resolve technical issues during the project lifecycle
• Monitor project progress and manage budgets effectively

Requirements:

• Possess Diploma/Degree/ in Electrical/Mechanical or equivalent professional qualification
• Proficient in BIM software and AUTOCAD will be an added advantage
• Good interpersonal and communication skills
• Capable of leading CSD/SEM coordination, design interface, coordination for construction of transit project, chair and lead coordination meeting.
• Minimum 5 years’ experience and at least 1 LTA MRT underground projects after tertiary education in related fields for construction supervision of similar scale and complexity.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.