Role:

Technical Manager (Mechanical / ACMV)

• Working Day: 5 Day | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio
• Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical (ACMV) services.
• Good knowledge in Mechanical works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for Mechanical (ACMV) services is preferred

Job scope

• Preparation and submission of Mechanical tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on Mechanical QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Summary:

• Construction industry
• Junior role up to $4000
• Senior role up to $5000
• Performance bonus on a yearly basis
• Location: AMK / YCK / Central
• 5 days work week
• Experienced in ACMV & LTA / SMRT

Key Responsibilities:

• Perform engineering design, calculations, planning, and tender preparation / evaluations
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaise with clients, project managers, architects, contractors about the projects
• Assist in resolving any technical problems faced during project design and / or construction stages
• Any other ad-hoc tasks required by the Project Team

Key Requirements:

• At least 3 years experience in relevant field
• Must have ACMV, LTA / SMRT experience

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Requirement

• Diploma/Degree in Information Technology/Computer Science or any related study
• At least 3 years of relevant experience
• Skills on SDLC, CI/CD, Agile

Responsibilities

• Develop, maintain and administer tools which will automate operational activities and improve engineering productivity
• Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.
• Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.
• Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.
• Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.
• Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.
• Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.

Interested applicants, Please send your updated resume in Word format to [email protected]

Please indicate Job Code 109 on email subject

We regret that only shortlisted candidates will be notified.

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1104129

Please visit www.itcspl.com to learn more information about ITC

Responsibilities:

• Oversee the construction activities and progress, plan, implement, and monitor work
• Schedule following the master and detailed work program
• Liaise with a Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle technical and engineering problems
• Guide supervisors about construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep the site safer and neat
• Supervise ongoing site activities closely

Requirements:

• Diploma in Civil Engineering or equivalent
• must have Lifting Engineer Certification for a Senior role
• Experienced in Singapore underground project, D/wall, and other structural works
• Minimum 2 years of relevant experience in LTA Project is preferred
• willing to work 6 days and/or 5.5 days per week

• Support Project Manager in planning and execution.
• Coordinate construction tasks per schedules and standards.
• Prepare and submit project documents and reports.
• Liaise with clients, consultants, and subcontractors effectively.
• Supervise site work to ensure quality compliance.

Requirements:

• Minimum Dip/Deg in Electrical Electronics Engineering with at 4 years of relevant working experience.
• Proficient in basic programming software such as VB, C, C++, Java, C# etc is advantageous.

Interested candidates please send in your resume to:

Yvonne Suan Ying Zhen

CEI No: R24122857

Email: [email protected]

EA License No: 99C4599

*All information will be treated with strictest confidence. We regret that only short-listed applicants will be notified.

Responsibilities:

· Coordinate and Supervise project work on various site

· Manage project schedule efficiently

· Review M & E Drawings

· Follow up on drawing discrepancies

· Implement project planning, design, material requisition, cost control and documentation

· Ensure smooth progress of works on site and timely completion

· Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

· ITE/Poly/Diploma/Degree in Electrical in any engineering field

· Prior experience in interior fit out works would be an added advantage

· Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)

· Fluent in English, both written & spoken

· Independent, resourceful, pro-active and team player

· Possess good organization, planning and project management skills

· Ability to work under tight deadlines

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with General Manager to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 5 years in marine industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components MRO.

Additional Information:

• 5 days’ work week
• Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Job Description :

• Responsible for all the handshake tests, writeup creation, demo arrangement, sample graphic submission, ICONICS license handling, server arrangement.
• Responsible for Writeup and GUI preparation, Backend development monitoring, server arrangement.
• Designing network architecture, VLAN, network switches and firewall selection, server selection, procurement on network devices, IP assignment, rack assignment, rack power calculation and UPS selection, port assignment
• Monitoring project progress, attending to technical discussions, providing technical support, arranging Software requirement (EMS and MMS), implementing Smart solution
• Getting quotations, PR arranging, PI arranging with BM team, product delivering, attending technical discussions, project progress monitoring, resolving issues
• Selection of licenses, getting quotation from HQ, approving PR, optimizing license requirements, distributing license keys, holding all the license details for past and current projects
• Contacting ICONICS support team, raising tickets to clarify issues, updating status of the issues, arranging monthly meeting with ICONICS, meeting minutes creating and sharing, distributing details of critical fixes, testing new requirements
• Referring technical specs, providing server and license requirement, attending to tender meetings
• Creating and amending technical guidelines for ICONICS, G5, third party integration, graphic creation, project management, D&A, network designing, license selection, server selection, training manual

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Knowledge of C++/ Phyton/ PLC is needed
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage

We regret that only shortlisted candidate(s) will be contacted.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Job Description: •

*Handle daily warehouse operations such as packing, receiving, loading, and unloading of goods.

*Ensure goods are correctly prepared for delivery.

* Fulfil all assigned deliveries on time, as per schedule.

* Upkeep and maintain good housekeeping of the warehouse.

*Perform any other duties as and when assignedRequirement.

*Candidate must possess a valid Class 3 driving license with good driving record •

*Requires to handle heavy loads/ items

*Good team player who is able to work independently when required. •

* Well-organised and possess a positive, keen-to-learn attitude.

* Lorry mechanical knowlege will be prefered

* Lorry need to clean everyday and makig as new lorry.

*After driving need to go marketting for manpower sites

* Collecting payments friom client office, wokers pick up from sites morning and evening.

* Minimun work everyday 8hrs, if sunday any urgent work must be present.

Prepare costing for new project
- Prepare shop/As built drawing for submission to authorities using Autocad software
- Prepare documents for the submission of drawings to relevant authorities
- Going out to sites for checking and inspection
- Any other related work assigned by the Company
- NITEC/Higher NITEC in Mechanical or related field
- Familiar with Autocad software/Microsoft Office
- Do not mind travelling to sites
- With working experience prefered
- Able to work and communicate with people from many other countries

58 RECRUITMENT PTE. LTD

12C5922

67026282

• Able to read and understand construction drawings and detect discrepancies for combined services.
• Responsible for the smooth and timely completion of projects
• Maintain all operational documentations and records
• Monitor and review performance of mechanics and draughtman
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Prepare and issue of weekly and Monthly QA/QC reports.
• Manage projects or project components, budgets, schedules, quality assurance and client feedback and ensuring effective communication of any changes/modifications to ensure cost control, maintain project timeline, manage manpower resources for the project.
• Undertake ad-hoc responsibilities assigned by sale manager / director

Requirements

• Degree in Mechanical Engineering
• At least 2 years experiences, preferably in the building & construction.
• Ability to work under pressure and to tight deadlines.
• Ability to communicate complex concepts
• Able to work independently and in a team
• Good interpersonal, analytical and problem-solving skills
• Required to travel to construction sites and analyze the deployed machineries' repair status when the need arises.
• Good understanding of local regulatory and code requirements.