Responsibilities:

Plan, design and administer contract/project of mechanical and electrical engineering works for building service including

• Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Minimum 3 years of relevant experience. Fresh Graduates are welcomed.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Job Summary

• This role is responsible for designing portions of engineering solutions, developing and implementing parameters and test plans, and conducting feasibility studies.
• The role applies intermediate level of subject matter knowledge to design, analyze, build, and test mechanical components.
• The role participates in project teams with internal and outsourced partners to develop reliable, cost-effective, and high-quality solutions.
• The role manages relationships with partners and suppliers, oversees design engineering change processes, and drives value engineering projects.

Responsibilities

• Designs portions of engineering solutions for mechanical and thermal hardware, electronics enclosures, and production tooling based on established engineering principles and in accordance with development technology practices and guidelines.
  Develops and implements parameters and test plans for existing designs, including validation of tolerances, form/fit/function, shock and vibration, electromagnetic interference, safety, reliability, developing fan curves, system power measurements & acoustics.
  Conducts feasibility studies, design margin and validation analyses and empirical testing on new and modified designs.
• Performs root cause analysis of defects, propose, evaluate and implement solutions.
  Works in a collaborative environment to design, analyze, build and test mechanical components, devices, structures and assemblies, including mechanical ground support equipment.
  Participates as a member of project team of other mechanical hardware engineers and internal and outsourced development partners to develop reliable, cost effective and high quality solutions for low to moderate to complex products.
  Manages relationships with outsourced partners and suppliers, on mechanical and thermal design and development, including setting expectations regarding deliverables, product quality, schedules, and costs.
  Manages design engineering change notifications/engineering change approval request processes, qualification tests, and schedule.
  Manages value engineering project proposals, schedule, tests, and communication.

Education & Experience Recommended

• Four-year or Graduate Degree in Electrical Engineering, Computer Engineering, Computer Science, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 2-4 years of work experience, preferably in engineering design and solutions, implementation across hardware development lifecycle, or a related field or an advanced degree with little or no work experience.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients, consultants, and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), and Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications.
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for the placement of students and younger engineers

APPLY NOW!!!

• Degree in Mechanical Engineering recognized by PEB Singapore
• Min. 2 years of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage.
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67061 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

· Interpretation of construction designs

· Project planning and analysis

· Attend meetings and go onsite walks

· Keeping records

· Inspection of materials

· Problem solving role

· Timely completion of projects

· Making plans using detailed drawings

· Preparing estimates and budgets

· Completing regulatory documents concerning safety issues

· Creating accurate project specifications

Job Descriptions

• Attends and conducts daily toolbox briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Ensures sub-contractors carry out the work as planned.
• Evaluate project to identify issues and opportunities to improve performance
• Ensures good co-ordination and communication between stakeholders.
• Maintains System & Sub System Mark-up Drawings.
• Ensures to follow-up Overall Commissioning and Completion Documentation.
• Creates Punch List, Updating and closing in PIMS.
• Prepares & follow up for signing Mechanical Completion Dossier (MC), signing (By Client) System Completion Dossier (SCD).
• Coordinates and arranges Tri Party Walk down, Discipline Completion Walk down (DCC) & Mechanical Completion Walk down (MC Walk down).
• Follow ups of completion hand over certificates

Requirements

• Bachelor’s degree in mechanical engineering or related engineering disciplines, Diploma holders with relevant experience are welcomed to apply
• 5 years of relevant working experience in construction of offshore platform industry
• Knowledge in PIMS – Omega365 and ProCo System
• Able to read P&ID and Test Pack Limits.
• A pass in shipyard supervisor safety course
• Must be a team player & be able to work closely with other discipline supervisors
• Willing to work late hours and rotating day or night shifts

Responsibilities:

The core responsibilities of this position:

• Support all development phases including design, design refinement, validation, and pilot production of mechanical parts
• Work closely with the R&D teams to determine battery design and mechanical characteristics
• Work with production team to develop processes/tooling for pilot scale manufacturing and optimizing new production methods
• Coordinate and execute product development trials. Summarize and present respective results, with conclusions, and recommendations.
• Develop assembly instructions and specifications, along with other engineering documents.
• Generate drawings, BOMs and follow Document Control methods
• Determine the best practices and most efficient method of achieving a consistent design/drawing package while maintaining configuration control.
• Perform tolerance stack-ups and while calculating dimensions, weight limitations and requirements in materials.
• Work integrally with both the electrical design and mechanical hardware to communicate technical ideas for accomplishing environmental testing involving vibration, shock, altitude, acceleration and temperature/humidity testing.
• Participate in the resolution of hardware problems or process non-compliances working with supervisors of Quality, Engineering and Production.

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Join our dynamic team at Makino Asia, where you'll be at the forefront of cutting-edge technology, driving innovation and excellence in the realm of CNC Milling Machines and Automation.

As a valued member of our Research & Development department, your responsibilities will include:

• Developing New Products and introducing Innovative Designs for our existing Series Products.
• Crafting Customized Machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating pneumatic, hydraulic, servo-electric, and sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

To excel in this role and contribute significantly to our Research & Development team, we seek candidates with the following qualifications:

• Minimum Degree in Mechanical Engineering from a reputable university, demonstrating a solid academic foundation.
• Proven track record of at least 3 years in mechanical design, preferably in a production environment, showcasing your expertise in developing cutting-edge solutions.
• A genuine passion for product design, understanding its pivotal role in driving innovation and bringing forth revolutionary products.
• Unleash your creativity to envision novel and inventive solutions that push the boundaries of what's possible.
• Exceptional analytical skills to tackle complex challenges, delivering reliable and efficient problem-solving.
• Proficiency in industry-standard design tools and software, allowing you to materialize your ideas with precision and finesse.
• Strong teamwork and communication abilities, enabling effective collaboration across multiple departments.
• An enthusiastic learner, always seeking opportunities to stay abreast of the latest trends and advancements in the field of mechanical engineering.

If you are passionate about cutting-edge technology, enjoy creative problem-solving, and thrive in a collaborative environment, this is the ideal opportunity for you to make your mark in the world of advanced manufacturing and automation. We eagerly await your application to join our progressive and innovative team at Makino Asia.

Come be a part of our extraordinary journey at Makino Asia and together, let's shape the future of manufacturing technology!

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Abie to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Responsibilities:

• Coach jobs, counsel on career and develop team members
• Develop needed infrastructure to ensure Mechanical Engineering Competency
• Support pre & post technical support to sales.
• Conduct technical presentations & training to customers
• Works with Clients’ engineers to establish company products in consumer products

Requirement:

• Degree or Diploma in Mechanical Engineering or relevant
• Possess at least 2 years of working experience either in application engineering or supporting engineering roles or related experiences in Mechanical or Fastening hardware industry.
• Bilingual in English & Chinese to liaise with Chinese speaking counterparts.

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Mechanical Engineering Manager

Description

• Lead, coach and develop the engineering team
• Provide technical guidance and support in TCP/IP, USB, BLE, Modem, Wi-Fi and Serial communications experience and developed low powered embedded systems
• Good at Tolerance Analysis/FACA for camera module, Wi-Fi, Zigbee, and Bluetooth
• Hands-on skills of TCP/IP, USB, BLE, Modem, Wi-Fi and Serial communications experience and developed low powered embedded systems
• Continuously evaluate and improve engineering processes and workflows.
• Implement best practices, advanced manufacturing techniques and methodologies. Stay updated with the latest technologies and industry trends.
• Ensure compliance with medical device industry standards and regulations.
• Coordinate with other departments to align project goals and requirements.
• Manage resources and prioritizing tasks to meet project deadlines.
• Communicate effectively with stakeholders, clients, and team members.

Education

• Bachelor’s degree in mechanical engineering or equivalent.

Experience

• Minimum 10 years’ of relevant working experience out of which 5 years should be in a lead or Manager’s role.
• Good knowledge in milling tooling and machining process.
• Experienced in R&D experience is a must

Skills

• Strong experience working with machine vision, 2D/3D camera module, embedded Linux drivers, kernel builds, etc
• In-depth experience in Linux and embedded firmware development especially in networking, Wi-Fi / Zigbee / Bluetooth / KNX RF wireless, IoT or LED Lighting products
• 5+ years of experience working with machine vision, 2D/3D camera module, embedded Linux drivers, kernel builds, etc
• Leadership skill.
• Project Management skills.
• Listening and Communication skills.
• Problem-solving and decision-making skills.

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Work under tight timeline
• Must be team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Responsibilities:

• Support and assist the SRE / RE / RA in duties, review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site
• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, drawings
• Report to the supervising Qualified Persons any work that are not constructed according to the building approved plans, project drawings including shop drawings;
• Report to project manager and/or project consultants any work that are not constructed according to the specifications and drawings;
• liaise with the supervising Qualified Persons and their engineers/architects / specialists on the review and approval of revised designs, amended drawings, specialist drawings, sketches, etc.
• Assist in the review of contractor’s method statements and working procedures, and to ensure that they are followed on site;
• verify progress payment claims, all other claims and reports submitted by the contractors;
• keep and review records of works including materials, samples, site equipment, inspections, test reports and ensure proper documentation, keep track of all records and forms
• oversee the maintenance of the site office, its cleanliness and orderliness, proper filing systems, plans

Requirements

• Diploma in Mechanical Engineering or equivalent from Singapore Polytechnic or other tertiary institutions of equivalent standing; and
• Possess at least 5 years of relevant and practical experience on site.

• Design & model 3D skid system, skid structure, piping GA and other not mentioned shop drawing (cutting plan) for fabrication purpose.
• Maintain proper record for drawings and information.
• Proficient in operating CAD drawings software and drawing construction detailed design.
• Create drawings and models from written and verbal specifications obtained from Engineer.
• Reviewing and checking sketches and drawings for errors before being sent to productions, vendors, engineers, etc.
• Review drawings for completeness and accuracy.
• Systematically saving sketches and drawings on CAD library, keeping the server organized; updating files as jobs progress and revisions are made.
• Continually create, edit, and update standard details for use in projects.
• Complete task assigned by superior and performing other relevant duties when needed.

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

The Mechanical Technician performs mechanical completion, pre-commissioning and
commissioning activities.

In order to complete Mechanical Completion, Pre-commissioning and Commissioning activities in accordance with the project completion plan and schedule, he should:

• Understand his roles and responsibilities and to be compliant with.
• Understand the project completion execution plan from the Discipline Lead Technician.
• Understand Notification of Energization (NOE) Flow Chart.
• Understand System Drawings and Walk Down procedure;
• Complete a Daily Report to ensure clear visibility to the Discipline Lead Technician.
• Attend the Daily Discipline Tool Box Talk to understand the daily activities;
• Perform the Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team in compliance with the project drawings and specifications.
• Perform the Pre-commissioning Activities (‘B’ Scope ITRs) in compliance with the vendor
  documentations and specifications.
• Support the Operation Test Procedure (OTP) under the supervision of the discipline Lead
  Technician.
• Utilize specific tools and test equipment for the system commissioning in safety and with
  quality.
• Assist field service vendor to conduct the system commissioning
• Comply with the HSSE requirements of the site. Ensure the safety and security of project personnel.
• Assess job related hazards during the development of safe working procedures and pursue
  opportunities to eliminate exposure.
• Attend the specified HSSE training and ensure direct reports are trained.
• Know how HSSE risks are managed and ensure that the HSSE controls for the activities/tasks are communicated. Supervise the safe execution of work and the implementation of controls.
• Communicate and practice in emergency response.
• Engage with team members and contractor staff on HSSE in meetings, pre-job briefings, during toolbox talks and attend key HSSE events. Communicate a consistent safety message, resolve unsafe situations, engage and intervene on unsafe behaviour and reward good safety behaviour.
• Liaise with HSSE department for support.

Requirement:

• Technical College diploma in Mechanical discipline or equivalent
• A minimum of 4 years’ construction or commissioning experiences in Oil & Gas Industry;
  especially for Offshore products and systems.
• Preferably gained within FPSO experience will be a strong selection criteria.
• Completions Tools (ECOM) including documentations
• PTW and JSA

Brunel International S.E.A Pte. Ltd.
UEN No: 199603098R
EA License No: 16S8067
Reza Johannes - R1871121

• Efficient project management, including project scheduling, leading, and coordinating the project team (supervisors, foreman, workers, and subcontractors)
• Liaise with clients, architects, consultants, and main contractors to resolve site issues and ensure timely project execution
• Coordinate workers on site and make accurate, decisive, and prompt decisions related to work matters
• Prepare, check, and submit shop drawings and as-built drawings, ensuring conformance to regulations and client requirements
• Produce detailed manufacturing drawings to implement design solutions to all relevant engineering and quality standards by using SolidWorks and other AUTOCAD software

Responsibilities:

• To keep track of all tender documents, drawings and corrigendum base on the document control process
• To verify tender drawings/details and prepare tender enquiry
• To assist in quotations, selection of qualified subcontractors/vendors and distribution of relevant tender documents
• Perform quantity take-off for tender projects based on timeline
• Assist with tender evaluation and preparation of tender documents for submission
• Ensure all documentary evidences and contemporary records are documented, filed and complied for substantiation purposes
• Able to read M&E drawings
• Site verifications of variations and taking records for submissions of claims
• Assist project manager/designated staff to evaluate and certify completed work
• Assist in verifying sub-contractor’s claims
• Monitor and report on balance amount

Requirements:

• Candidate must possess at least a Diploma/Advanced/higher/Graduate Diploma in Quantity Survey or Mechanical Engineering or equivalent
• Minimum 3 years QS experiences
• Knowledge & experience in M&E system requirements
• Able to work under pressure and meet tight deadline
• Able to work independently with minimum supervision
• Good knowledge and skill set in Microsoft Office
• Fast learner and willingness to explore new skill sets/technologies

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Abie to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Roles & Responsibilities

- Prepare drawing for submission to authorities using Autocad software

- Prepare documents for the submission of drawings to relevant authorities

- Going out to sites for checking and inspection

- Any other related work assigned by the Company

- Familiar with Autocad software/SOLID WORKS

- Do not mind travelling to sites

- With working experience prefered

- Able to work and communicate with people from many other countries

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure the timely completion of given tender assignment

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Able to work a under tight timeline
• Must be team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

• Maintenance and Troubleshooting: Perform routine maintenance and troubleshooting on electrical systems, equipment, and machinery to ensure optimal performance.
• Installation: Install, test, and commission electrical equipment and wiring as per the company’s standards and technical specifications.
• Electrical Repairs: Diagnose and repair faults in electrical systems, components, and circuits, using a variety of testing equipment.
• Safety Compliance: Ensure compliance with all electrical safety regulations, codes, and company safety protocols at all times.
• Preventative Maintenance: Implement and maintain a preventative maintenance schedule to minimize equipment downtime and extend the life of electrical systems.
• System Upgrades: Assist in the upgrading or replacement of obsolete electrical components and systems to improve efficiency and performance.
• Documentation: Maintain accurate records of inspections, repairs, and maintenance work done, as well as any changes to system designs or installations.
• Night Shift Coverage: Provide support during night shifts as needed, ensuring that electrical systems are operational during off-hours.
• Emergency Response: Be on-call to respond to emergency breakdowns or electrical faults during nights or weekends, ensuring minimal downtime.
• Team Collaboration: Work closely with engineers, maintenance teams, and other departments to identify and resolve electrical issues and ensure seamless operations.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.