Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair

Description of Responsibilities

• To carry out mechanical installation of Automated Materials Handling System (ASML) in cleanroom environment
• Ability to obey, follow, execute, and follow up on instructions by higher management, independently or as part of a team.
• Timely delivery of projects or tasks at hand
• Escalate and highlight any discrepancies, issues, or problems during job progress.
• Create, maintains, and signs off Proof of Delivery (POD) for submission to relevant departments.
• Able to put in compensated extra hours when requested and required due to the unforeseen work environment and schedule.

Key Performance Indicators (but not limited to)

• Timely delivery of projects or tasks at hand
• Punctuality
• Attendance

Career Prospects:

Candidates can aspire to take on leadership role in other areas of work within Build It department

Critical Skills/Knowledge:

• Effective Interpersonal and Communication Skills
• Air-con repairing / mechanic experience will be advantage

Education:

• O'Level and above

Other Considerations:

• Comfortable to work at heights and tight spaces

Job Title: Mechanical Engineering Technician (Motors and Engines)

Responsibilities and Duties:

• Inspect and troubleshoot equipment, machinery, and operating systems, identifying and correcting issues as needed.
• Maintain high standards in mechanical operations, ensuring systems meet operational and safety requirements.
• Diagnose and resolve mechanical issues with motors, pumps, conveyors, hydraulic systems, and other related equipment.
• Provide expert-level technical support and guidance to junior technicians when necessary.
• Perform both independently and as part of a team to ensure timely completion of tasks.
• Adhere strictly to company safety guidelines, procedures, and industry standards.
• Conduct regular preventive maintenance on machinery as per established protocols.

Technical Skills:

• Use a variety of hand tools, power tools, and rigging equipment for daily tasks.
• Perform welding using cutting torches as needed for repairs and maintenance.
• Operate and maintain heavy industrial equipment, including forklifts, scissor lifts, basket trucks, and bobcats.

Compliance and Reporting:

• Ensure compliance with both company and customer regulations, as well as policies.
• Maintain and manage personal tools, including keeping an up-to-date, documented personal tool inventory.
• Accurately manage time records and complete work orders in a timely manner.
• Foster positive relationships with both customers and team members through effective communication and professionalism.

• Assist engineers in producing detailed and construction drawings.
• Min. 2-3 years of working experience in mechanical engineering field
• Design and drafting of mechanical arrangement, assembly and details
• Able to work under pressure and meet datelines
• AutoCAD skills and Microsoft Office
• Support the engineering manager on projects as required

As a Mechanical Architect you will be the driving force for the development of high-tech, highly complex systems for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. Starting during the pre-concept phase, you act as a counterpart for the Project Manager within T&D for scoping the project and challenging our customer. While going through the different design phases, you will be the driving force who challenges the feasibility and cost-effectiveness of the proposed design solutions, bringing together the multidisciplinary team on a technical level while acting as a technical counterpart on system level with our customers.

Your responsibilities include:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer.
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of (mechanical) concepts.
• Definition Phase: develop Description of System Design Requirements and Specifications and discuss them with internal/external stakeholders.
• System Design Phase: generation of system design concepts and reviews:
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications.
• Make use of your creativity and helicopter view to find solutions in case of conflicts
• Detail Phase: supervise the creation of 3-D models and drawings, ensuring (sub)module interfaces meet their respective requirements.
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production.
• Production release: release the design for production.

Requirements:

• Master’s Degree or PhD in Mechanical or Mechatronic Engineering, preferably with a focus on construction / precision mechanics.
• At least 10 years of relevant working experience (semicon, precision mechanics, or similar).
• Extensive knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness.
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation.
• Experienced in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems in both the static and dynamic domain.
• User of 3D design tools (e.g. NX or SolidWorks).
• User of product lifecycle management systems (e.g. TeamCenter or EPDM).

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Degree/Diploma in Mechanical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

Benefits:

• 14 days of annual leave per year. Prorated based on join date.
• Variable bonus.
• Meal allowance.
• Annual health screening.
• Dental reimbursement.
• Hospitalisation insurance.
• Specialist treatment coverage.
• Annual allocated training hours for each employee.

Responsibilities:

• To adhere to prevailing Company SOPs including service KPIs.
• To carry out indoor and outdoor service jobs (commission, repair, troubleshoot, inspection, modification, warranty checks).
• To investigate customer complaints (product defects, failures or non-conformance) and recommend solutions.
• To issue customer outdoor and indoor service reports.
• To disassemble cancelled units for stock return.
• To provide service and maintenance training sessions on product usage for customers.
• To perform routine maintenance and repair work on inverters and gear motors.
• To report discrepancies if any.

Requirements:

• ITE (Mechanical Engineering) with 1 year of relevant work experience.
• Basic proficiency in English (both written and spoken) is mandatory.

Work Conditions:

• Must be comfortable working outdoors in order to repair and service inverters and gear motors.
• Must be willing to be on standby for after office hours for service activiation, with OT payment.
• Must be willing to commute to clients' site for servicing. Transport reimbursement is provided for commute between the office and client sites.
• Work-at-height is required at some clients' sites.
• Must be open to occasional overseas work on adhoc activation basis.

• Support projects from the Mechanical Engineering/Design perspective of Buildings (Industrial/High-Tech, Data-Centre) from initial scoping through detailed design, commissioning, and final handover, including preparing technical specifications, reports, and cost estimates.
• Collaborate with respective departments to develop client proposals and tenders, aiming to achieve profitable business outcomes. This involves bid planning, facilitation, cost estimation, writing, technical input, and necessary approvals.
• Serve as a technical authority, providing mentorship and guidance to other electrical engineers in the team while ensuring technical excellence in all aspects of project execution.
• Foster strong client relationships by contributing to client plans and maintaining a positive rapport while supporting the development and motivation of team members and junior engineers.

Requirements

• Bachelor's Degree in Mechanical with a minimal of 3-10 years of prior functional experience with Engineering Consultants, Design Practices or Professional Services
• Buildings (Industrial/High-Tech, Data-Centre)
• Good knowledge of working drawings and construction practices
• Conversant with local codes & regulations
• Competency in authority requirements and submission procedures

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367

Descriptions

• Plan, execute and supervise all M&E related work services.
• Manage M&E works and services for effective and efficient M&E facilities performance.
• Coordinate and supervise the M&E installation and building maintenance work.
• Working closely with the client, sub-contractors, and the project team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
• Involve in the preparation of the method statement, work progress, drawings and other relevant documents related to M&E works.
• Assist in planning, controlling and coordinating of mechanical, electrical and building works.
• Schedule, monitor and supervise the progress of works .
• Prepare and follow- up closely on the client inquiries and quotations.
• Follow the company internal work processes and documentation.
• Involve in conducting toolbox meeting and coordination meeting.
• Coordinate, liaise and communicate with people of all levels
• Build and maintain good client relationships and uphold high quality standards.

Requirements

• Minimum Diploma / Degree in Engineering or Facilities Management related qualifications.
• M&E Facilities operations background with at least 3 years of experience will be an added advantage. Advantage to have Fire Safety Protection Certification.
• Candidates looking for Electrical Engineer position or currently working as M&E / Electrical Engineer (For Facilities Maintenance / Management industry) are welcome to apply.

Tan Choon Hau

Senior Talent Acquisition Consultant

EA Licence No:18C9251

EA Reg ID: R1988835

Job Description:

Create 3D solid model of components and/or assembly based on sketches or physical parts;

Provide mechanical engineering drafting support to project teams;

Modify and update mechanical engineering drawings.

Job Requirements:

Higher NITEC in Mechanical Engineering Drawing & Design or its equivalent;

Min 2 years' experiences in related field;

Proficient in modeling and creating fabrication drawings;

Proficient in drafting standards, ISO, ANSI Y 14.5;

Knowledge in Solid Edge modeling & drafting software will be an added advantage;

Knowledge in MS office application;

Able to work independently with minimum supervision.

NOTE: Open to Singaporeans only.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Your new company

My client (West area) is a leading provider of comprehensive utility solutions and value-enhanced energy services, delivering innovative and integrated offerings to their customers.

Your new role

Here is a summary of the role you are applying for;

They are seeking an experienced Mechanical Maintenance Team Lead to join their team. As a key member of the maintenance team, you will be responsible for ensuring the effective maintenance of plant and equipment to achieve high reliability and availability. You will lead a team of maintenance professionals, coordinate maintenance programs, and optimize planned maintenance activities. Additionally, you will troubleshoot faults, perform failure analysis, and implement plant improvement projects to enhance overall plant performance.

Below are some of the key responsibilities for the role;

• Lead and manage a team of maintenance professionals to ensure effective maintenance of plant and equipment
• Coordinate and optimize planned maintenance activities, including scheduled plant inspections and maintenance programs
• Ensure compliance with statutory, regulatory, and safety requirements
• Troubleshoot faults, perform failure analysis, and recommend corrective actions
• Implement plant improvement projects to enhance plant reliability, availability, and performance
• Supervise maintenance contract works and prepare technical specifications for equipment parts and services
• Manage procurement and track expenditure against approved department budget
• Develop and maintain a safety mindset and display good workplace safety behaviour

What you'll need to succeed

The successful candidate, should have;

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries
• Sound Mechanical engineering maintenance knowledge
• Good knowledge of safety and statutory requirements
• Self-motivated team player with analytical mind, strong planning, and problem-solving skills
• Ability to work effectively in a team and lead day-to-day activities
• Willingness to be part of the CERT team and participate in emergency responses as required

What you'll get in return

• Joining a company that is at the forefront of our industry
• Being part of a collaborative and progressive team
• Contributing to a company committed to making a positive impact on the environment and society

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Role Responsibilities

• Responsible for the running of small projects. Researches, develops, designs and assumes responsibility for coordination and monitoring of engineering project services for Mechanical installations, systems, equipment, facilities etc.
• Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes
• Surveys tests and reports on existing mechanical installations
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Represents Company at technical meetings with customers, professional teams and contractors teams
• Preparation of specification modifications (word or excel)
• Ensure engineering calculations and drawings meet required robust industry and legal standards
• According to the seniority, responsible for validation of Intermediate & Graduate Engineer input into designs

• Licensed or degree qualified or equivalent experience and have sufficient experience with international Consulting Engineering.
• Working towards or have achieved MCIBSE/MIEE/Professional/Chartered Engineer or equivalent status
• Experience of specification design/drawing for at least one building type
• Sound knowledge of key Health and Safety issues and legislation
• Knowledge of MS Office apple excel etc
• Ability to use IT based calculation and spreadsheet software
• Good understanding of BS SC standards and international design codes and standards
• Ability to prioritise own workload
• Ability to work to deadlines
• Act in an ethical manner and follows the principles of the Ethics Charter and Ethics in Practice Guidelines
• Background in consulting or construction preferred.
• Good understanding of international working and business operations of a global consultancy.
• Act in an ethical manner and follow the principles of the Ethics Charter and Ethics in Practice Guidelines of the Group

Job Description

· Responsible for ensuring that assigned projects meet customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practiced and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 2 years of working experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.

• APAC engineering support
• To design refrigeration system for enquiries/ tenders received from sales team
• To select major equipment and enquire prices
• To provide costing for the project
• To fill in tender pricing, energy calculations and drawings
• To prepare quotation and forward to sales tea
• To design piping drawings and select components
• To prepare purchase acquisition for major equipment
• To draw project schedule and workshop drawings and prepare as-built drawing / operation manual
• To submit progress billings with documentation and arranging for shipment (for overseas projects)
• To design refrigeration system for enquiries/ tenders received from sales team
• Technical support

Requirements

• Degree in engineering
• Familiar with AutoCAD and design software
• At least 2-3 relevant experience in commercial air-conditioning or refrigeration

Working in fab enviroment, doing troubleshooting and maintenance for the machining. (Scrubber machining), provide solutions for customer in the event machine is alarm or down.

At least a diploma in mechanical, electrical or mechatronic engineering field.

- able to work in a hot enviroment

- Able to support after office hours if needed

-Midnight standby is needed (transport allowance provided)

-Able to wear jumbsuit if needed

-Prefer multilingual in Singapore context with good communication skill

-Only singaporean

Job Description & Requirement

• Assist and provide technical inputs/support in our R&D in establishing a quality product from concept stage to prototype completion including conducting tests, interpreting data, finding high-quality materials to use, and conducting research on various parts.
• Responsible for design & development of commercial vehicles focus on technical specification and performance of the vehicles and powertrain components as well as software used in the vehicles.
• Liaise with OEMs on technical issues and raise Technical Reports, Prepare Technical Instructions to address technical issues on our product.
• Prepare Assembly work instructions, Quality control instruction and Operation Manual of our product.
• Create & maintain accurate Manufacturing Bill of Materials, develop cost- estimates for manufacturing process hours.
• Prepare new product specifications and provide support on component installation as required.
• Manage workload with a positive attitude as a team player in a collaborative work environment.
• Manage Product costing & provide support to sales.
• Qualification and Experience
• Min Diploma/Bachelor in Mechanical Engineering.
• Minimum 4 years’ experience working in an Automotive, Manufacturing, Machine shop, assembly environment or similiar environment
• A thorough understanding of engineering design principles and material processing
• Experience in Bill of Materials from either the Automotive, Aerospace or Rail industries
• If you have considerable experience of the automotive industry in an engineering Release & Change environment is an advantage
• If you understand automotive terminology, familiar with vehicle systems & components and the sequence of build of a vehicle is an advantage
• Proficient with Microsoft Word, Excel, PowerPoint
• Familiar with ISO 9001 or TS 16949 Quality Management System
• Experience in ERP applications will be an added advantage.
• Familiar with Lean Manufacturing principles, including Continuous Improvements
• Good communication skills, highly efficient, passion for engineering.

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Mentoring of Mechanical Designers with the intent of securing properly trained personnel for the continual expansion of the company;
• Ensuring the System Supervisor is provided with the current shop and space management drawings, specifications, approved technical submittals and all approved changes in scope;
• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation;
• Evaluating technical submittals for specification and client requirement compliance;
• Approving Test Packs at each step of construction through to completion;
• Forwarding testing and commission passing criteria to the System Supervisor;
• Evaluating progress claims against work complete;
• Evaluating contractor variation quantity claimed is accurate.

Requirements:

• Degree in Mechanical Engineering
• At least 3 years of design experience

Angela Teh Ling Wei (CEI No.R1104464)

Contact Number:67860100

Email Address:[email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted