Tunnel Engineer

Required to be experienced in operations of TBM machine, excavation and ring building.

• Prepare method statements, safe work procedures, risk registers, tunnel progress reports, and other tunnel-related documentation.
• Prepare and carry out the presentation of tunneling works prior to the commencement of works.
• Plan and monitor and track site progress, manpower mobilization, and equipment deployment.
• Conduct daily site inspection and supervision of bored tunneling works.
• Supervision work on a TBM machine controlling the tunnel labor in excavation and ring build.
• Maintain site records of excavated volumes, grouting records, and other construction work.
• Liaise with authorities, consultants, and subcontractors.
• Providing technical advice and suggestions for improvement on tunnel projects.
• Diagnosing and troubleshooting equipment as required.
• Resolve any unexpected technical difficulties and other problems that may arise.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser for tunnel projects.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Oversee quality control and health and safety matters for tunnel project.
• Prepare reports as required.

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• UBI

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibility :

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Check and assess temporary works and ERSS by the contractors to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations;

Qualification:

• Minimum six (6) years of relevant experience as a mechanical and electrical engineer, of which at least 3 years shall be in supervision of works similar in nature to the Works, i.e. in particular major construction works in buildings, services laying and testing and commissioning;
• Possess a Mechanical and/or Electrical engineering degree recognized by the Professional Engineers Board of Singapore;
• Lead M&E site staff to monitor, supervise and inspect works as directed by CAG, QP(S), QP(Geo), SRE and/or, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;
• Possess strong supervision and leadership skills.

Role:

Production Engineer (Mechanical / Manufacturing)

• Singapore Based (Senoko, Sembawang area, company transport provided)
• 5 Days work per week (8am to 5.30pm)
• Salary: Up to $3100 + Allowance + AWS + VB
• Degree in Mechanical/Manufacturing Engineering or equivalent + 1 year with relevant experience is an added advantage.
• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.
• Require putting on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary. + Willing to work overtime when needed
• Career Progression Opportunities

Responsibilities

• Responsible for production operation activities to ensure smooth and efficient manufacturing process.
• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.
• Handle audit in accordance with TS/IATF & ISO and OHSAS requirements

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

• Mentorship, guidance, and training will 100% be provided
• Great for fresh grads who want to start out in the engineering field

• Responsibilities:
• Design, prepare shop drawing, methods statements, quality installation, inspection, testing and commissioning, documentation works for BMS system.
• Site coordination, project schedule planning, coordinate site works
• Design and deploy BMS controlling and building automation system.
• Project Management and attend project meeting.
• Provide training to customers.
• Provide testing and commissioning services

Requirements:

• Min Diploma / Degree in Engineering (Mechanical / Electrical Engineering / Construction / Building related)
• Able to define BMS project work scope, requirements and specifications, and identify, allocate resources for executing the project from start to completion.

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Scope:

• Provide technical support and troubleshooting for mechanical products
• Assist in product integration and customer site applications
• Collaborate with sales teams to deliver tailored solutionsX`
• Liaise with R&D to provide customer feedback and insights
• Prepare technical documentation and user training materials
• Conduct product demonstrations and training for clients
• Ensure optimal product performance and customer satisfaction
• Participate in product testing and validation
• Stay updated on industry trends and new technologies

Requirements:

• ITE or Diploma in Mechanical Engineering (or equivalent)
• Strong hands-on skills with small mechanical parts
• Proficiency in English and/or Chinese; Japanese is a plus
• Familiarity with AutoCAD 2000, R14, and SolidWorks is advantageous

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

As a Facilities Mechanical Engineer, you will be leading engineering and maintenance works in the fields of Mechanical equipment and system on site, to achieve continual improvement to system robustness, reliability and efficiency with the necessary guidance and direction from Facilities organization, to achieve facilities department, site, facilities corporate and company goals.

Job Responsibilities

• Plan and implement preventive and corrective maintenance programs for Facilities mechanical systems including HVAC, exhaust systems, scrubbers, process cooling water, chillers, boilers, cooling towers, compressed air systems, Fire protection system and cleanroom air systems to ensure maximum equipment uptime and reliability.
• Plan, design and lead mechanical system expansion projects to facilitate tool utilities demand of future technology of manufacturing equipment.
• Plan, design and lead mechanical engineering projects includes new construction, system upgrading and quality improvement.
• Respond and problem solving of system issues and production interruptions to mechanical related systems.
• Perform capacity tracking and planning for mechanical systems.
• Enforce to company’s environmental safety health policy and procedure, standard operating procedure with risk assessment, good housekeeping standard and quality policy when performing work.
• Apply computer base software to document and analyses records of maintenance work order, equipment history and project tracking.
• Maintain maintenance record for system fault history traceability.
• Proficient in quality tool such as 8D & 5 WHY analysis for troubleshooting or incidents.
• Initiate and lead energy savings & sustainability projects.

Job Requirements

• Bachelor’s degree in Mechanical engineering.
• Design and Engineering background of mechanical system such as HVAC system and Exhaust system will be of good advantage.
• Ability to understand and use schematic, single-line drawing and related equipment and system documentation.
• Ability to work in a team environment with various professional level.
• Considerable knowledge and application of problem solving and data analysis methodology.
• Considerable knowledge of maintenance practices and procedure and installation work.

Our Client:

• Construction Industry [MNC]
• Havelock
• Mon – Fri, 8.30am – 5.15pm
• UP $3,500 Basic + VB + Mobile Allowance

Job Description:

• Assist the QS Manager in calculating quantities and costs for tender assignments, ensuring supplier proposals meet all requirements.
• Understand general contracts and various tender documents.
• Provide budget estimates as instructed.
• Liaise with suppliers for product and service presentations.
• Find solutions to technical issues during the tender process.
• Communicate with other departments regarding documents and issues.
• Coordinate with suppliers/contractors for follow-up on bills and quantities.
• Evaluate market rates for materials and labor monthly or quarterly.
• Hand over all tender documents and costing to the project team once awarded.
• Attend site visits for interested tenders.
• Respond to tender clarifications and prepare for interviews and presentations.

Requirements:

• Min. Diploma in Mechanical & Electrical Engineering or equivalent.
• Min. 1 year of mechanical engineering working experience as a Quantity Surveyor in Sub-Contractor environment.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Deidrie Chiam Rui-Xuan | EA Reg No: R23116361

RS Recruitment Agency LLP | EA Lic No: 17C8809

Job Description

• Perform mechanical & thermal analysis and characterization of advanced IC packages
• Build up new mechanical & thermal capabilities with latest simulation and characterization technologies
• Design advanced packages for customers to meet their reliability and manufacturability specifications & needs
• Assess the feasibility of new packaging assembly and process technologies with respect to mechanical and reliability performance
• Conduct IC packaging technology development together with other teams
• Carry out mechanical, thermal and reliability test and correlate with mechanical & thermal simulation for validation

Requirements

• Degree / Master in Mechanical Engineering or related field
• Solid knowledge on FEM & mechanics of material
• Mechanical modeling experience for IC package’s stress & warpage, board-level reliability such as drop test & TCOB using simulation software such as Ansys or Abaqus is a must
• Thermo-mechanical modeling experience for IC assembly molding process, die stress/shifting in WLCSP, and wire bonding using simulation software such as Ansys & Abaqus is preferable
• Mechanical and reliability test experience such as drop test, TCOB test, warpage measurement, bending test, material strength test is highly desirable
• Thermal Modeling experience using CFD software such as Flotherm / Icepak is highly desirable
• Team player with good interpersonal and communication skills
• Keen for R&D activities in IC packaging technology development, package’s mechanical & thermal analysis/ design/ optimization/ characterization

Responsibilities

· Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements

· Preparing and submitting the Weekly & Monthly Quality reports.

· Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.

· Maintaining the RIN Register and follow up with QPS for closing.

· Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.

· To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.

· To be physically present during asphalt pavement work for road diversion work.

· Study shop drawing and liaise with design department on the design issue that may cause difficulty in production.

· Conduct mould inspection for every new mould and mould in use.

· Materials ordering

· Arrange production based on Daily Production Planning from planning department.

· Responsible for achieving the daily planned volume/productivity.

· Prep our inspection together with production supervisor and RTO

Requirements

· Degree in any Engineering discipline

· Minimum 5 years experience in QA/QC works in construction industry

· Experience in structural steel works or precast RC works

Designing, maintaining, implementing, or improving electrical cooling products and facilities.

Performing a wide range of engineering tasks by operating computer assisted engineering software.

Conferring with customers, engineers, and others to discuss existing or potential engineering products or project.

Ensuring compliance with specifications, codes or customer requirements by directing or coordinating installation.

Writing reports and compilling data regarding existing and potential electrical engineering projects and studies.

Preparing specifications for purchase of electrical equipments and materials.

Estimating material, labour, or project costs for budget preparation.

Supervising or training project team members.

Maintaining electrical equipment.

Working with a variety of technicians

The Rapid Response Damage Assessment (RRDA) program is seeking an Engineer or a Senior Engineer to assist with the modeling and analysis of vessel stability and hull strength for ships and offshore floating structures and verify their compliance with applicable Rules and Regulations.

· The RRDA program provides 24/7 technical assistance to ship and offshore floating structure related emergencies such as grounding and collision. When activated, RRDA is an extension of the vessel management team’s own response capability, focusing on the measure of changes occurring to hull strength, stability and the extent to which risk of pollution can be mitigated. This new position is expected to work along with a group of experienced engineers to respond to client service requests when emergencies occur or participate in routine vessel emergency response drills.

The RRDA work by nature of its complexity and difficulty require the fully competent application of conventional knowledge in a particular field of engineering or science. Through broader and more technically challenging work assignments, the ideal candidate will develop a thorough understanding of policies, methods and procedures.

What You Will Do:

• Under the supervision of an experienced engineer or the RRDA manager, develop analysis models and perform detailed engineering analyses to assess vessel stability and hull strength and verify their compliance with applicable Rules and Regulations.
• Perform work which involves conventional engineering practices but may include complex problems such as the resolution of limited information provided by the client, conflicting client requirements, or time constraints.
• Develop technically accurate and timely reports, and responses to client phone calls, emails and other forms of communication for review by an experienced engineer or the RRDA manager.
• Prepare accurate and timely weekly reports and billing on all work performed.
• Communicate the status of the current workload to all appropriate members of the team to meet the needs of clients.
• Standby for and respond to client service requests on the rotating shift
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Work as a team member within the RRDA response team. May work autonomously, once trained, with limited supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Naval Architecture, Ocean Engineering, Civil or Structural Engineering, or other related disciplines.
• Experience (coursework, research, or industry experience) with vessel stability calculations and ship and/or offshore floating structures is preferred
• Experience with stability software and/or salvage software such as Hecsalv, GHS, or NAPA is a plus.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others and sometimes within tight schedules

Overview

As a Production Engineer, you are to assist the Production Manager in overseeing the production operation and work out schedules and plans, monitor progress, forecast demand of resources, and manage all the technical activities aiming at assuring smooth project delivery and optimization of production performance from conception to completion. You are to adhere to company's Integrated Management System (IMS) and compliance to applicable Singapore Standards and Regulations in the Industry.

Responsibilities

1. Plan, manage and coordinate projects to ensure that the projects are completed on time, within budget and of highest quality.
2. Work closely with clients, suppliers, consultants, contractors, and relevant authorities in projects managed.
3. Plan, develop, execute, monitor project schedule, resource plan and budget.
4. Monitor compliance to applicable codes, practices, QA / QC policies, performance standards and specifications.
5. Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status.
6. Supervise team of Supervisors, foreman and workers in the production operations to ensure quality, productivity, and safety.
7. Set daily/ weekly/ monthly objectives and communicate them to production team.
8. Cooperate and communicate effectively with project stakeholders to provide assistance and technical support.
9. Review engineering deliverables and initiate appropriate corrective actions.

• Singapore Based (City Hall, may need work at site)
• 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
• Minimum of 5 years of relevant site / building construction experience.
• Career Progression Opportunities

Requirements

• Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Roles:

-Interpretation and analyze of production drawings & documents. -Implementing best fabrication / machining practices and techniques to develop and maintain efficient processes to achieve productivity, quality and safety.

-Planning of project and management of the project team to keep project on schedule and budget.

-Handle all day-to-day issues and troubleshooting problems as they arises finding efficient and effective solutions.

-Estimate costs for quotation preparation.

-Coordinate and work closely with management, customers, contractors and suppliers.

-Maintain good customer relationship.

-Perform other duties as assigned to ensure success of project and company objectives.

Requirements:

-NItec / Diploma in Mechanical / Manufacturing Engineering or related.

-At least 5 years experience in metal fabrication and machine shop activities.

-Self-motivated and result-driven mindset

-Great communication and interpersonal skills

• Develop new customers while managing our existing customer base
• Pre-sales preparation (preparing project budgetary prices, quotations, costings, completion of technical specifications, delivering catalogues and engineering data to customers)
• Provide technical and engineering support to customers, whenever necessary.
• Electrical & mechanical products knowledge

System Engineer

Role and Responsibilities

• Staff should have experience in server and storage Hardware design and deployment. Implementation skills starting from racking, cabling, start-up, OS installation, patching. This applies for any server brand and model. Troubleshooting skills for post setup.

• Experienced in enterprise backup software implementation, starting from infra design, installation, and configuration.

• Knowledge in Software deployment and patch management procedures including server patching with virtualization

• Experienced in virtualization platform like VMWare & HyperV

• Vendor management and project handling skills

Additional experience/tasks:

• Methodical approach to problem solving and resolution.

• Self-driven and resourceful to achieve goals independently as well as work well in groups.

• Flexibility to adjust to changing requirements, schedules, and priorities.

• The ability to socialize ideas, make recommendations and gather team consensus to move forward.

• Must be effective in communication both orally and in writing to technical and non-technical audiences at all levels in an organization; develop procedural documentation; develop and conduct effective presentations.

• Related Technical Certification, with at least 3 years relevant experience

• Able to work under stress and irregular hours

• May require to be at customer site assignment (scheduled days of the week)

Requirements

• Diploma/Degree in IT or relevant field.

• Minimum three (3) years of IT experience, with two (2) years of server, storage &backup infrastructure deployment, troubleshooting or administration experience.

• Equipped with Microsoft Cloud Certification and AWS/Google experience

• Experienced infrastructure project implementation & troubleshooting.

We are seeking a highly skilled Service Engineer to join our dynamic team. The Service Engineer will be responsible for providing technical support and expertise to our in-house production team in Singapore and globally, and ensuring our products operate efficiently and effectively. This role requires a strong understanding of TIG automatic cladding machines, manual welding machines (E.g. Fronius Brand)

Key Responsibilities:

• Install, maintain, and repair automatic and manual welding machines and/or CNC Machining
• Diagnose mechanical, electrical, and software-related issues and propose appropriate solutions.
• Conduct preventive maintenance and calibration of equipment to ensure optimal performance.
• Resolve production technical concerns and requirements.
• Provide in-house training on the proper use and maintenance of equipment.
• Create and maintain detailed service reports and documentation.
• Work closely with the sales and engineering teams to support product development and improvement initiatives.
• Stay updated on new technologies and industry trends to provide proactive support and recommendations.

Requirements:

• Proven experience as a Service Engineer or similar role in the O&G industry
• Strong problem-solving skills and ability to think analytically.
• Excellent communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• Willingness to travel frequently to Philippines and Malaysia as needed.

Location: Singapore / Philippines

Application Process:

Interested candidates should submit a resume and cover letter outlining their qualifications and interest in the position to [email protected]

Ø organize and manage the electrical department as necessary, from receiving tenders to completing final accounts.

Ø To ensure sub-contractors are supervised and their standard of work is acceptable and in compliance with recognized safety practices and specifications

Ø To control and effectively manage department operations through regular site visits as necessary, to assess progress, safety, and quality, and to give instruction and advice

Ø To liaise with departmental staff, clients, contractors, and suppliers in matters relating to work

Ø To attend meetings, training workshops, and other work-related issues, as required, which may involve working outside normal hours

Ø To liaise with specialists and consultants to obtain assistance and advice

Ø To supervise staff including allocation and control of work

Ø To prepare method statements in conjunction with the Safety officer

Ø To liaise with the Safety Officer in arranging safety inspections

Ø To check and authorize orders and invoices, ensuring correct procedures are followed

Ø To liaise with Human Resources in matters relating to development and training courses for electrical staff

Ø To attend management meetings as required

Ø To undertake specific projects and prepare reports for the Technical Director as required

Ø To adhere to existing working practices, methods, and procedures, undertake relevant training and development activities, and respond positively to new and alternative systems

Ø Undertake any additional duties as and when required by the line manager/business

Ø Ensuring adherence to all company policies & procedures.

Ø To identify system weaknesses and suggest new/efficient procedures to strengthen it

Ø Promote health and safety and ensure adherence to health and safety policies and procedures.

Ø Undertake any additional duties as and when required by the business.

Ø Ensuring adherence to all company policies & procedures.

Ø To identify system weaknesses and suggest new/efficient procedures to strengthen it

Ø Promote health and safety and ensure adherence to health and safety policies and procedures

Ø Accountable for creating a safe working environment, managing risks reducing exposure to hazards to levels practically achievable, and ensuring implementation of QHSE Policy.

Ø Complying with all IMS Procedures, and QA/QC standards as applicable to deliver work safely and maintain the highest quality standards with minimal environmental impacts.

Ø Wear appropriate safety or protective equipment as identified required through risk assessments or as specified, at all times.

Ø Contributing to enhancing quality, health, safety, and environment within the organization.

In addition to the above, all supervisors and managers have a duty of care to ensure that a safe place of work is maintained and that appropriate welfare facilities are provided. Also, to ensure that all hazardous situations and possible hazardous conditions are identified and avoided. Workers must be briefed on the hazards likely to be presented, with the knowledge that the risks have been calculated, and must be informed of the controls required to mitigate those risks.

Minimum Qualification:

Ø BE or B-Tech in Electrical Engineering

Ø Proficient in the use of MS Word, excel, outlook, and other electrical software

Minimum Experience:

Ø Proven working experience as an Electrical Engineer

Ø Excellent knowledge and understanding of both marine and land-based electrical systems, procedures, and legislation

Ø Ability to ensure that labor, materials, plant, and equipment are used effectively and efficiently

Ø Ability to organize and direct electrical and associated staff, determining priorities to maximize the use of resources in achieving prescribed objectives

Job Specific Skills:

Ø Product & business knowledge

Ø Attention to detail is essential

Ø Able to manage workload

General Skills:

Ø Good team player with good organization skills

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

• Managing the planning and design stages of construction projects.
• Contributing technical expertise to project drawings and designs.
• Performing cost calculations and preparing financial projections.
• Preparing work schedules in collaboration with the project manager.
• Liaising between contractors, subcontractors, vendors, and suppliers.
• Overseeing construction engineering processes.
• Performing regular tests on materials and procedures to ensure compliance with industry regulations.
• Ensuring that the construction project is completed on time and within budget.
• Documenting processes and keeping detailed construction logs.
• Presenting construction project progress updates to clients and senior manangement

Support the Quality Manager and teams; follow up Daily schedule and prepare the Quality control and Quality assurance inspection documents.

• Ensure the proper implementation of the quality programmes for internal audits

• Carry out different type of track work Test and Inspection for Electrical testing, Concreting, Toe Load test, Turnouts, Thermit and Flash Butt Welding .

• Coordinate with client for material standards and method statement relating matters

• Attend laboratory testing for different type of materials (Proving test as well as routine test)

• Maintain all project quality records, quality audit plans and technical documents relative to site quality control

• Overseas FAT Inspections and respective report submissions

Requirements:

• Degree/ Diploma in Engineering or equivalent

• Minimum 5 year(s) of experience in Construction project

• Familiar with Singapore MOM safety rules.

.