• Lead a team of mechanical supervisors and contractors in performing all the plant maintenance, modification, and construction activities to ensure work are carried timely, safely and with good maintenance practices with no disruption to plant operations.
• Coordinate with plant operators and other maintenance groups in the execution of plant maintenance and modifications works with no compromise to safety of workers and integrity of facilities.
• Carry out mechanical study and modification of plant facilities according to technical specification and business requirements.
• Performs technical investigation on plant equipment troubles, evaluation of findings and recommend countermeasures to effectively prevent recurrences of similar problems
• Conduct and arrange training for staff and contractor to enhance their skill and competency levels.
• Respond to plant emergency calls and resolve mechanical troubles within tight schedule.
• Implement management systems based on standards stipulated under ISO 9001, ISO 14001, ISO 450001 and SS651.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning and follow up all new and retrofit projects of Sterile filling for the manufacturing site

· Responsible for development of SOPs, quality standard, development, and execution of Qualification protocols with following site QMS procedures.

· Responsible for managing a team of vendors / contractors.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensuring best available technologies are incorporated by design.

· Delivering the project within the budget and timeline approved.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure to maintain the highest standards for cGMP requirements for the manufacturing site.

· Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready all the time.

· Achieve financial objectives through efficient project management.
Qualifications

Education:

· Bachelor’s / master’s degree in mechanical engineering or equivalent.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Responsibilities

• Develop and design mechanical systems and components for machine automation projects.
• Utilize CAD software to create 3D models, assemblies, and detailed drawings.
• Work with the team to ensure designs meet project requirements and standards.
• Assist on various projects consisting of the design, fabrication, and modification of components.
• Coordinate with fabrication house and component suppliers.
• Assist in assembling, installing, and completing the design work in which you were involved.
• Involve in design reviews, troubleshooting, and continuous improvement efforts.
• Perform all given tasks within given time.
• Be committed and responsible.
• Any other duties as assigned.

Requirements / Qualifications

• Diploma / Degree in Mechanical/Mechatronics Engineering or relevant technical discipline.
• Fresh graduates are welcome to apply (Must be willing to learn).
• Candidates with automation background only.
• Proficient in designing and drafting using 3D CAD software.
• Proficient with Microsoft Office.
• Good communication skills.
• Able to start immediately.

Responsibilities:

• Liaise and work closely with the Main contractors on the planning and progress of M&E work to meet the project schedule.
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Prepare correspondence reports, suggesting corrective actions or value-added recommendations according to best practice when applicable,
• Responsible for keeping daily work record, including additional work claim to the clients.
• Other ad-hoc duties when assigned

Requirements:

• Background in M&E works. Diploma or degree in Civil/Mechanical Engineering is a plus.
• Min 10 years working experience and equipped with knowledge in M&E in a construction industry
• Be able to work independently and in a team
• 6 days work week and shift work during critical phase.

Job Scope:

• Design and develop mechanical and electrical systems for buildings and infrastructure
• Conduct feasibility studies and cost estimates for M&E projects
• Collaborate with architects, engineers, and contractors to ensure project alignment
• Prepare technical specifications and project documentation
• Supervise installation, testing, and commissioning of M&E systems
• Ensure compliance with relevant codes, standards, and regulations
• Perform site inspections and quality assurance checks
• Troubleshoot and resolve technical issues during the project lifecycle
• Monitor project progress and manage budgets effectively

Requirements:

• Possess Diploma/Degree/ in Electrical/Mechanical or equivalent professional qualification
• Proficient in BIM software and AUTOCAD will be an added advantage
• Good interpersonal and communication skills
• Capable of leading CSD/SEM coordination, design interface, coordination for construction of transit project, chair and lead coordination meeting.
• Minimum 5 years’ experience and at least 1 LTA MRT underground projects after tertiary education in related fields for construction supervision of similar scale and complexity.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Key Responsibilities:

• Preventive and corrective maintenance for DRUPS (Dynamic Rotating UPS) at customers sites.
• Perform schedule preventive maintenance program at various customers’ sites.
• Attend trouble shooting and corrective repair on site
• Identify issues and potential issues from PM activities, provide feedback and possible solution to back office for issue resolution discussion with customers.
• Generate and maintain lean and clear documentation like service report from every service activity.
• Others maybe be needed for customer services.

Requirements:

• Diploma or Degree and above with M&E Engineering background.
• 2-3 years Relevant M&E engineering service or project management experience.
• Good knowledge on electrical system, mechanical, electrical rotating machine functionality, and service methodologies.
• Ability to handle high reliability service demand with technical solution.

1 Able to read and produce mechanical drawings, electrical drawings and electronics schematic diagrams/ wiring diagrams；

2 Coordinate, schedule and supervise work assignments together with workshop supervisor;

3 Good team player, work closely with the project team to ensure specifications are met;

4 Liaising with sub-contractors and suppliers and inter department personnel;

5 Submission of final costing to Finance Department;

6 Perform other ad-hoc duties as assigned by superiors

Job Description & Requirements

Duties & Responsibilities

• Assist the Team Leader and Job Captain in the performance of their duties
• Supervise the other design drafting team
• Ensure quality and accuracy of designs
• Ensure compliance with project Design Criteria/Client Brief/Approved Concept
• Ensure compliance with relevant design standards and office standards
• Attend and participate in design meetings
• Ensure compliance with ISO Quality Procedure Manual

Requirements

• A bachelor’s degree in mechanical engineering recognised by Professional Engineers Board.
• Entry level with some consultancy internship experience are welcome to apply
• 1-2 years of design experience in consultancy firm would be advantageous
• Must have prior hands-on design experience in the design of ACMV, Fire and Hydraulic services for large scale building projects
• Experience in Rail and infrastructure projects and data centre an advantage

Additional Requirements:

• Good interpersonal and communication skills
• Must be fully familiar with local and international codes
• Hands-on experience with relevant engineering software and BIM
• Must be able to work independently
• Must have a good understanding of unit costs of the MEP services in various types of projects

The Company
Our client, a global leader in the chemical industry, is seeking a Mechanical Engineer to join their chemical manufacturing team. This role reports directly to the Head of Engineering.

The Role
As a Mechanical Engineer, your key responsibilities will include:

• Planning, executing, and optimizing preventive, predictive, and corrective maintenance activities using FMEA and RCM methodologies.
• Diagnosing and resolving mechanical issues to minimize downtime and enhance equipment efficiency.
• Monitoring equipment performance metrics and recommending upgrades or modifications where necessary.
• Incorporating sustainable practices into maintenance operations, with a focus on energy efficiency and waste reduction.

QUALIFICATIONS

• A Bachelor’s degree in Mechanical Engineering or a related discipline.
• At least 3 years of experience in mechanical or maintenance engineering, preferably within the chemical, petrochemical, or manufacturing sectors.

If you are interested to explore this opportunity, you may send your updated CV to me at [email protected].

We thank you for your interest in this position. Due to the anticipated overwhelming responses, we regret that only successfully shortlisted applicants will be contacted.

Heny Lim
EA Registration No.: R22105263
Hudson Global Resources (Singapore) Pte Ltd
EA Licence: 23C2056

Company Write Up:

Durapower is 15 years in operations and is company identified by Enterprise Singapore to scale up for growth as well. We have projects in Netherlands, Singapore, Thailand and Southeast Asia regions, production is in China as a manufacturing plant. There is no manufacturing here, but we have R&D team here liaising with China as well to execute trade of cells, battery modular systems packs enabling green industry applications. Our expansion is also enhanced by the stakes and investment in us through Banpu Next (Banpu Group) which is listed on the Thailand Stock Exchange.

You may refer to the news here: https://en.prnasia.com/releases/apac/durapower-to-advance-global-expansion-plan-after-us-70-million-investment-from-banpu-next-394762.shtml

Video by Management on Durapower:

https://www.linkedin.com/posts/activity-6945009405591465984-ew1t?utm_source=linkedin_share&utm_medium=member_desktop_web

This position will be supported by Enterprise Singapore on the Singapore Global Executive Programme (Companies) (enterprisesg.gov.sg).

You may read up on Durapower's Management Associate Programme - Durapower-management-associate-programme – Durapower Group.

Job Description: Mechanical Engineer (ESG-SGEP)

The specialization of this job role will enable mechanical & structural design initiatives.

Responsibilities

· Serve as local design lead for customized design and pre-sales proposal, platform design, design-changes, trials, and root-cause analysis.

· Own mechanical and structural analysis using CAE tools.

· Own basic on-site component and system level testing to support design and specification changes, coordinate validation testing for changes with global team.

· Organize Root-Cause & Corrective Analysis for design issues

· Collaborate directly with Manufacturing, Process, and Quality to solve yield barriers and scrap issues

Requirements

· Degree with less than 3 years of experience in Mechanical Engineering

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Responsibilities

· Assist, plan and execute or draft Mechanical / Electrical / Fire / Plumbing & Sanitary (MEPL) project in compliance with safety, quality, and schedule

· Create process flow diagrams, general arrangement drawings, piping & instrumentation diagrams, and isometrics.

· Draft and prepare Shop drawing / as-built drawing of the given MEPL service with (CAD) software.

· Ensure all drawings are in accordance with the standards set by company’s quality.

· Perform file management on a regular basis.

· Participate in continual quality check and improvement of work activities.

· Complies with company safety regulations and ethics.

· Ability to work under pressure.

· Assist to propose value engineering methods with the clients to interpret their requirements and represent them in the field.

· Provide technical submission of proposal / drawings / MOS / RA etc

· Able to travel for site survey/study to better understand conditions/limitations onsite and attend site meetings and necessary site walk

· Cooperate and communicate effectively with internal and external stake holder.

· Review engineering deliverable and initiate appropriate corrective actions

· Any other duties as assigned and comply to ISO / OSHA standards

Requirements:

· 2-3 Year(s) of working experience in managing Additional and Alteration services in Commercial / Industrial / Plants sectors MEPL services

· Candidate must possess at least Bachelor's Degree/ Diploma in Engineering or drafter / mechanical experience.

· Proficient in Good software usage in Autocad / Solidwork / Revit / BIM etc software.

· Able to work independently and yet a team player with leadership.

· Ability to handle multiple projects and task with a high attention to detail.

· Pleasant, mature, meticulous with good interpersonal skills.

· Proficient in MS Excels/words/PowerPoint/Project.

· Preferred skill sets: good leadership skill, self-Driven, resourceful, problem-solving nature, strong business acumen, project management and good conversational/writing skills in English

Job Description:

• Update and control of Mechanical Engineering specification,procedure and drawings in CMMS (Computerized maintenance management system).
• Register, control and maintenance of assets management in CMMS.
• Material Management including consumables,parts and spare units in CMMS.
• Respond to breakdowns, diagnosing faults, record and report in CMMS.
• Review and approve of service, repair and overhaul equipment, record and report.
• Managing staff “shift or on-call' work as necessary.
• Planning and supervising scheduled maintenance, improvement and investment works.
• Contract and evaluation of cost including technical proposal on improvement and investment works.
• Managing vendors, suppliers and contractors including performance appraisal.
• Managing staff KPI (Key Performance Indicator), appraisal and training plan.
• Ensuring compliance with machinery and equipment statutory requirements.
• Ensuring compliance with QEHS (Quality, Environment, Health and Safety) legislation.
• Managing routine 5S at the maintenance workshop, store and work area at site.
• Provide training to Supervisors and Technicians if needed.
• Responsible for maintaining and improving availability of rotating equipment across the Plant.
• Develop and ensure data quality for documents uploaded in the CMMS.
• Develop Mean Time Between Failure, Mean Time to Repair, Failure Mode Effect Analysis template for rotating equipment and implement it.
• Develop and monitor the performance of the rotating equipment.
• Deliver quick and effective technical solutions and proactively interface with other discipline leads for resolving issues.
• Identify bad actors in the plant and reliability improvement.
• Initiate the engineering management of change and execute the changes for plant improvement and modification work.
• Develop and maintain Standard Operating Procedures and Risk Assessments for the maintenance of rotating equipment.
• Planning and execution of all rotating equipment preventive and corrective maintenance.
• Condition monitoring of rotating equipment through online and offline vibration analysis, oil analysis and other techniques.
• Develop training plans for Operations & Maintenance Teams.
• Prepare estimates and budgets for rotating equipment.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group

Job Requirements:

• Degree or Diploma in Mechanical Engineering or Maintenance Reliability Engineering field.
• At least 6 years of working experience in engineering with EPC/EPCM contractors or in Operation & Maintenance in the Oil, Petrol or Chemical plant or similar.
• Knowledge in Refractory repair work is an advantage.
• Strong desire to work in a leading edge industrial environment with a strong focus on reliability and efficiency.
• Strong Verbal and written communication skills.
• Proficient in Computer Skills such as Microsoft Office, Microsoft Project, Auto Cad, CMMS, etc.
• Able to work independently and in a team to achieve departmental goal of lean production.
• Knowledge of Maintenance and Asset Management is an advantage.
• Good knowledge of industrial standards such as API, ASME etc.
• 
  

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Working Hours: Mon to Fri 8.30am-5.15pm
Work Location: Tuas Crescent (Company transport available from Marsiling and Jurong East)

Responsibilities:

• Source and identify suppliers for direct/ indirect materials/ services to expand supplier base and for new project/production needs.
• Obtain quotes from new sources to provide costing information and cost reduction
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/ services.
• Be part of team to conduct supplier qualification audit as well as parts qualification to ensure suppliers can meet company needs.
• Qualify suppliers once suppliers are selected in order to add suppliers into the Approved Vendor List.
• Conduct supplier performance review on a regular basis to manage supplier qualification and updates on supplier capabilities.
• Maintain standard operating procedures applicable to the Procurement department to ensure work flow process are consistence.
• Develop and negotiate favorable supply agreement with suppliers.

Requirements:

• Welcome Degree Holders in Mechanical Engineering without any working experience to apply
• Training provided

To Apply:

Please attach your resume in WORD with the following information :

• Reason for leaving last/ current employment
• Last drawn salary
• Expected salary
• Notice period

(We regret that only shortlisted candidates will be notified)

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are seeking a skilled and motivated Mechanical Engineer to join our dynamic team. In this role, you will play a pivotal part in supporting the mechanical engineering aspects of our technical operations, from designing mechanical parts to collaborating with vendors and ensuring product quality.

This position offers an exciting opportunity to work in a hands-on environment, contributing to the development and enhancement of our products while ensuring seamless cross-departmental integration.

If you are passionate about mechanical design, adept in CAD software, and thrive in a collaborative and international setting, we invite you to bring your expertise to our innovative organization.

Responsibilities Breakdown:

1. Technical Support: Offer expertise on mechanical engineering aspects across all technical operations.
2. Design and Drafting: Create precise mechanical designs and technical specifications for parts or products, leveraging CAD tools.
3. Vendor Management: Source and coordinate with vendors for fabricating mechanical components, ensuring adherence to designs and conducting quality checks upon receipt.
4. Cross-Functional Collaboration: Support production, repair, and customer service teams to address technical queries, resolve issues, and handle product returns.
5. Compliance and Quality: Follow and fulfill the roles detailed in the company’s QEHS (Quality, Environment, Health, and Safety) framework.

Requirements Analysis:

1. Educational Background: A degree in Mechanical or Mechatronics Engineering ensures a solid foundation in design, systems, and manufacturing.
2. Hands-on Experience: At least 4 years in manufacturing or workshop settings provides practical expertise, essential for effective problem-solving and process improvement.
3. Assembly Skills: Proficiency in mechanical assembly reflects the role’s practical application aspects.
4. Software Proficiency: Familiarity with tools like SolidWorks, Creo Parametric, and AutoCAD Inventor indicates the need for expertise in 3D modeling and drafting.
5. Soft Skills: Teamwork, responsibility, and effective communication in a diverse environment highlight the importance of collaboration and adaptability.

Job Scope:

• Provide technical support and troubleshooting for mechanical products
• Assist in product integration and customer site applications
• Collaborate with sales teams to deliver tailored solutionsX`
• Liaise with R&D to provide customer feedback and insights
• Prepare technical documentation and user training materials
• Conduct product demonstrations and training for clients
• Ensure optimal product performance and customer satisfaction
• Participate in product testing and validation
• Stay updated on industry trends and new technologies

Requirements:

• ITE or Diploma in Mechanical Engineering (or equivalent)
• Strong hands-on skills with small mechanical parts
• Familiarity with AutoCAD 2000, R14, and SolidWorks is advantageous

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

JOB RESPONSIBILITIES

• Perform basic drafting

• Prepare design drawings / calculations / schematic diagrams / reports for;

o Mechanical ventilation system

o Fire protection system

• Perform prescriptive / performance-based submissions to Fire Safety Department (FSD)

• Attend meetings with clients, consultants, inspectors and authorities

• Perform basic report writing (optional)

• Perform CFD simulations (optional)

• Perform occupants evacuation simulations (optional)

REQUIREMENTS

• Basic numerical and communication skills (written and verbal)

• Able to work in teams

• Attention to detail and iterations

• Candidate is expected to be autonomous under supervision and guidance

• Basic familiarity with Fire Code 2018, local code of practices and standards

• Familiarity with software (Mandatory)

o CAD

o Microsoft Word

o Microsoft Excel

o Microsoft Powerpoint

• Familiarity with software (Optional as training will be provided)

o Corenet

o Pyrosim

o Fire Dynamic Simulator

o Pathfinder

ACADEMIC QUALIFICATIONS

• Minimum B.Eng. (Mechanical) from a recognised institution.

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 8 years’ experience

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP).

This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement. Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP. AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure. You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP.

You can apply here: https://aces.aceplp.com.sg/apply/nt/

Responsibilities:

• Plan, design and administer contract/project of mechanical and electrical engineering works for building service including Schematic / concept and detailed design.
• Preparation of tender drawing/specifications & cost estimates.
• Attend project meetings, site meetings & site inspections.
• Review of shop drawings and technical submissions.
• Contract administration.
• Testing and commissioning of electrical and mechanical systems.

Requirements:

• Degree in Mechanical / Electrical / Building Services Engineering.
• Good interpersonal and communication skills.
• Able to work independently, self-motivated and resourceful.

Salary:

• Commensurate with qualification and experience.

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines