The Senior Mechanical Engineer is a leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g. software, mechanical, electronics, system, testing etc) to enable development of baselined and software designs that support the product development and product goals of EOS DS.

The Senior Mechanical Engineer exercises in-depth engineering technical knowledge within or across specialist disciplines and the ability to enable strategic alignment. Adherence to governance and standards and mobilising people to achieve business outcomes with the appropriate levels of integrity, safety and ethics is critical to the role.

The Senior Mechanical Engineer exercises initiative and judgement in the interpretation and application of policy and procedures. The Senior Mechanical Engineer may lead a small team and are responsible for managing, developing and guiding staff to achieve their full potential. They provide a high level of support to their team, in consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

Primary Duties:

Specific Functions & Tasks

• Lead and support a multi-disciplinary team to ensure the timely and professional delivery of project outcomes.
• Produce mechanical designs that enable and satisfy defined requirements in the specified time frames.
• Work with systems engineers to ensure that all requirements are identified, captured and analysed.
• Work with project engineers to ensure design solutions are delivered on time and on budget and meet identified requirements.
• Produce mechanical designs that satisfy defined requirements in the specified time frames.
• Develop, review, update, modify, and approve mechanical design plans and work schedules.
• Prepare and review all documentation required to support designs.
• Perform conceptual design, models and drawings of complex mechanical assemblies.
• Perform FEA of models.
• Document designs including calculations, design options and decisions.
• Conduct design reviews with the view to endorse mechanical design.
• Perform test, evaluation, characterisation, verification & validation of mechanical assembles in collaboration with Test Engineers.
• Prototype mechanical assemblies and systems.
• Work closely with other engineering disciplines to ensure cohesive and complete system designs.
• Apply DFX principles (manufacturability, testability, excellence).
• Outline and assign work, review work for technical accuracy and adequacy and provide guidance and mentorship the Mechanical Engineers.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and communicate strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and enable a high level of leadership and deep industry, defence system knowledge, and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence stakeholders through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Champion the assessment and use of rigorous development and problem-solving methods to enable safe, secure, and reliable solutions to engineering problems.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation and verification activities on integrated system designs and prototypes (including formal check points) to verify and provide recommendations for sign-off of all design requirements to the lead engineer and design authorities based on relevant legislative requirements, standards and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to enable and ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Technology Officer.
• Enable EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide deep engineering judgement for progress and the advancement of sound engineering solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Technology Officer, Chief Engineers and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder.
• Uses experience for sound judgements

RESPONSIBILITIES

• Prepare and review key project documentation in executing the complete scope of piping engineering work as per the project requirements.
• Familiar with offshore piping materials, stress engineering, platforms and FPSO layout design, material handling and pipe support design.
• Conduct 3d Model reviews as per project requirements.
• Experience in piping standards, creating MTOs.
• Ensure that technical compliance with all design requirements is met.
• Prepare and review detailed calculations, analysis, and solutions to deliver safe, secure, and fully functional facilities.
• Interface with Client’s Engineering team to resolve the technical issues.
• Effectively manage design changes and provide optimized solutions during project executions.
• Review and management of project general specifications, engineering procedures and policies.
• Provide work progress reports.
• Accountable for the quality engineering deliverables.
• Provide engineering guidance to Contractors wherever required.
• Achieve safety standards as defined in Project requirements.
• To achieve project completion to the project specifications on schedule.
• Support project planning as necessary.
• Field Engineering support during construction phase of the project.
• Coordinate with class for surveys and reviews related to shipyard work.
• Coordinate with internal and external parties for monitoring and controls.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Minimum educational requirements of a Bachelor’s and/or Masters’ degree in mechanical/materials engineering.
• Direct experience as a lead piping engineer working on FPSO projects.
• Minimum 15 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as a Senior or Lead Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Shall be skilled with commonly used business software applications such MS Office, MS project and drafting software such as AutoCad and ed modelling software such as PDMS.
• Shall be capable of supporting the development and implementing recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke, Gas, Fire and Explosion Risk Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies.

• We are seeking for service Engineers with hands-on mechanical expertise for commissioning, troubleshooting, repair and overhaul of ship's propulsion systems.
• Well verse with broad range of engineering aspect such as mechanical, hydraulics, electronic control systems and industrial automation are involved
• Good understanding of automation and mechanical systems involved.
• Interest in shipbuilding and heavy machinery as well as in industrial control and automation technology is required.

Requirements

• Possess at least a Diploma or Bachelor’s Degree in Mechanical, Mechatronics, Electrical Engineering and adequate work experience with marine propulsion systems.
• Able to travel overseas and work at irregular work hours when required.
• Able to work with minimal supervision.
• Possesses good communication skills

Kindly understand that only shortlisted candidates will be notified.

WeLead Solutions Pte Ltd

Poon Wai Soon, Bernard

Reg. No: R2197713

EA License No.: 23C1882

1. Design and Development:

• Conceptualize, design, and develop mechanical components and systems for Maxiton's refuse compactors and related equipment.
• Conduct structural and functional analysis to ensure designs meet performance, safety, and regulatory standards.
• Collaborate with cross-functional teams (electrical, software, and manufacturing) to integrate smart technologies into mechanical systems.

2. Prototyping and Testing:

• Create and refine prototypes, ensuring alignment with technical specifications.
• Plan and execute testing protocols for durability, efficiency, and safety of mechanical systems.
• Analyze test data and implement design improvements to optimize product performance.

3. Manufacturing Support:

• Provide technical expertise to production teams to ensure seamless manufacturing processes.
• Develop and maintain detailed engineering documentation, including CAD models, drawings, and BOMs.
• Identify and resolve design-related manufacturing issues promptly.

4. Maintenance and Troubleshooting:

• Assist after-sales and customer service teams in diagnosing and resolving mechanical issues in the field.
• Recommend and implement design updates to improve reliability and reduce maintenance requirements.

5. Innovation and Research:

• Stay updated on industry trends, materials, and technologies to enhance product offerings.
• Contribute to the development of next-generation solutions, such as energy-efficient systems and IoT-enabled equipment.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering or related field.
• Experience: 2+ years in mechanical design, preferably in waste management, heavy equipment, or hydraulics.
• Technical Skills:Proficient in CAD software (e.g., SolidWorks, AutoCAD).
  Strong understanding of hydraulics, structural mechanics, and material properties.
  Familiarity with IoT or sensor integration is an advantage.
  
• Soft Skills: Excellent problem-solving, communication, and project management skills.

• Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability
• Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
• Ensure no down time due to unavailability of spare parts.
• Service used equipment’s and components and ensure ready to use all time.
• Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
• Manage in-house contractors to execute maintenance timely and effectively.
• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
• Update long-term maintenance plan for facilities and utility equipment’s.
• Ensure all maintenance activities comply with EHS policies.
• Be familiar with the operations of the following equipment : Pumps, compressors, blowers, boilers, chillers, conveyors
• Experience in Plant & facilities in chemical plant.

• Take instruction from/assist reporting to superior.
• Produce sketch drawings.
• Set design criteria , check design calculation and drawings.
• Assist in technical proposals.
• Check documentation complies with design criteria/Client brief/Approved concept/Standard.
• Liaise/attend clients, architects and site meetings.
• Maintain and check for completeness record, etc.
• Resolve any technical problems faced during the project design and/or construction stages.
• Other ad-hoc assigned by Director.
• At least 5 years of working experience in the construction industry.
• Candidate must possess a least bachelor's degree/post graduate diplima/professional degree in Engineering Mechanical or equvalent.
• Relevant project experience in HVAC/ACMV/MEP system both in design and project management.
• Strong knowledge of M&E installation, current practices, code and authorities requirement.
• Knowledge in ACMV product R&D preferred.
• Knowledge in Auto Cad and BIM preferred.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

Construction company requries mechanical engineer.

• Lead a team of mechanical supervisors and contractors in performing all the plant maintenance, modification, and construction activities to ensure work are carried timely, safely and with good maintenance practices with no disruption to plant operations.
• Coordinate with plant operators and other maintenance groups in the execution of plant maintenance and modifications works with no compromise to safety of workers and integrity of facilities.
• Carry out mechanical study and modification of plant facilities according to technical specification and business requirements.
• Performs technical investigation on plant equipment troubles, evaluation of findings and recommend countermeasures to effectively prevent recurrences of similar problems
• Conduct and arrange training for staff and contractor to enhance their skill and competency levels.
• Respond to plant emergency calls and resolve mechanical troubles within tight schedule.
• Implement management systems based on standards stipulated under ISO 9001, ISO 14001, ISO 450001 and SS651.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Taking the conceptual design through to implementation and handover.
• Ensuring sustainability targets are incorporated into the design.
• Producing the tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates.
• Progressing the design following the Design Checklist.
• Chairing Sub-contractor progress meetings.
• Chairing Mechanical Department Client weekly Meetings.
• Liaising with Quality Assurance / Quality Compliance Engineers to ensure they are aligned with the requirements of the specification.
• Mentoring an Engineer with the intent of securing properly trained personnel to ensure the continual expansion of the company.
• Ensuring each System Supervisor is provided with the current and applicable shop and space management drawings.

Qualifications:

• Bachelor of Science or Bachelor of Engineering (Hons.) Degree in Mechanical Engineering or an appropriate field
• Having 6 - 8 years of relevant experience with design experience desired
• Experience with design and construction preferably in industrial buildings.
• Technically competent across the full range of Mechanical Systems.
• Experience in Industrial projects such as microelectronics, pharmaceuticals, and semiconductors is an added advantage.
• Building servicing system – plumbing and sanitary, fire protection (sprinkler, hose reel, hydrant), ACMV, HVAC systems.

Job Scope:

1. Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

1. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them
2. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.
3. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Qualification:

1. Strong knowledge of M&E details, working drawings and local construction practices
2. Conversant with local codes and regulations
3. Is a good team player and is analytical and a problem solver
4. Excellent in communication skills, both verbal and writing skills, with a high level of attention to detail
5. Strong interpersonal skills, ability to develop relationships and communicate with all levels of management
6. Proficient Microsoft Office and other IT software

Roles & Responsobilities:

The executive engineer is responsible for the design, diagnostic, testing as well as repair and overhaul of mechanical, electrical and electronic components of the chillers and other related systems in support of our overall chiller manufacturing process. The engineer shall be required to independently plan, schedule, coordinate and optimize on-site and workshop activities and coordinate with the sales and marketing team where required.

Key Responsibilities:

Design, diagnose, test as well as repair and overhaul mechanical, electrical and electronic components of the chillers and other related systems

Spearhead digitization of existing chillers through selection, adoption and/or redesign of PCB & PLCs

Coordinate and liaise with internal production, sales & marketing team as well as external end customers, contractors and consultants on-site

Supervise and check suppliers’ works and/ or end customer requirements according to design drawings, specifications and regulation (local codes or relevant international design codes)

Check and ensure the equipment and material offered in compliance with the specification and drawings.

Generate engineering & electrical drawings with Autocad software

Perform all other duties as assigned and required.

Requirements:

Candidate must possess at least Diploma in Engineering (Electrical/Mechanical) or equivalent.

At least 2 -3 year(s) of working experience in Electrical/Mechanical related fields is required for this position

Required Skill(s): Autocad, Microsoft Office

Licensed Electrical Engineer OR Licensed Electrical Technician is a bonus

Required Spoken and Written Language(s): English, Mandarin

Preferably with class 3 driving license

Working Hours : Mon to Fri (8.00 am to 5.00pm) & Sat (8.00am to 3.00pm)

If you are keen to join Group of Weeseng, contact us at 6245 2712 or email to

finance@ weeseng.com

Responsibilities

• Develop and design mechanical systems and components for machine automation projects.
• Utilize CAD software to create 3D models, assemblies, and detailed drawings.
• Work with the team to ensure designs meet project requirements and standards.
• Assist on various projects consisting of the design, fabrication, and modification of components.
• Coordinate with fabrication house and component suppliers.
• Assist in assembling, installing, and completing the design work in which you were involved.
• Involve in design reviews, troubleshooting, and continuous improvement efforts.
• Perform all given tasks within given time.
• Be committed and responsible.
• Any other duties as assigned.

Requirements / Qualifications

• Diploma / Degree in Mechanical/Mechatronics Engineering or relevant technical discipline.
• Fresh graduates are welcome to apply (Must be willing to learn).
• Candidates with automation background only.
• Proficient in designing and drafting using 3D CAD software.
• Proficient with Microsoft Office.
• Good communication skills.
• Able to start immediately.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning and follow up all new and retrofit projects of Sterile filling for the manufacturing site

· Responsible for development of SOPs, quality standard, development, and execution of Qualification protocols with following site QMS procedures.

· Responsible for managing a team of vendors / contractors.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensuring best available technologies are incorporated by design.

· Delivering the project within the budget and timeline approved.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure to maintain the highest standards for cGMP requirements for the manufacturing site.

· Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready all the time.

· Achieve financial objectives through efficient project management.
Qualifications

Education:

· Bachelor’s / master’s degree in mechanical engineering or equivalent.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Job Description & Requirements

• Plan, conceptualize, and create mechanical designs for new products
• Develop testing processes, and perform testing and validation of new designs
• Generate working prototypes for beta testing and customer demonstration
• Perform engineering calculations to support design work
• Create and review technical drawings, plans, and specifications using computer software
• Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and project stays within budget

Responsibilities:

• Liaise and work closely with the Main contractors on the planning and progress of M&E work to meet the project schedule.
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Prepare correspondence reports, suggesting corrective actions or value-added recommendations according to best practice when applicable,
• Responsible for keeping daily work record, including additional work claim to the clients.
• Other ad-hoc duties when assigned

Requirements:

• Background in M&E works. Diploma or degree in Civil/Mechanical Engineering is a plus.
• Min 10 years working experience and equipped with knowledge in M&E in a construction industry
• Be able to work independently and in a team
• 6 days work week and shift work during critical phase.

Job Scope:

• Design and develop mechanical and electrical systems for buildings and infrastructure
• Conduct feasibility studies and cost estimates for M&E projects
• Collaborate with architects, engineers, and contractors to ensure project alignment
• Prepare technical specifications and project documentation
• Supervise installation, testing, and commissioning of M&E systems
• Ensure compliance with relevant codes, standards, and regulations
• Perform site inspections and quality assurance checks
• Troubleshoot and resolve technical issues during the project lifecycle
• Monitor project progress and manage budgets effectively

Requirements:

• Possess Diploma/Degree/ in Electrical/Mechanical or equivalent professional qualification
• Proficient in BIM software and AUTOCAD will be an added advantage
• Good interpersonal and communication skills
• Capable of leading CSD/SEM coordination, design interface, coordination for construction of transit project, chair and lead coordination meeting.
• Minimum 5 years’ experience and at least 1 LTA MRT underground projects after tertiary education in related fields for construction supervision of similar scale and complexity.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Key Responsibilities:

• Preventive and corrective maintenance for DRUPS (Dynamic Rotating UPS) at customers sites.
• Perform schedule preventive maintenance program at various customers’ sites.
• Attend trouble shooting and corrective repair on site
• Identify issues and potential issues from PM activities, provide feedback and possible solution to back office for issue resolution discussion with customers.
• Generate and maintain lean and clear documentation like service report from every service activity.
• Others maybe be needed for customer services.

Requirements:

• Diploma or Degree and above with M&E Engineering background.
• 2-3 years Relevant M&E engineering service or project management experience.
• Good knowledge on electrical system, mechanical, electrical rotating machine functionality, and service methodologies.
• Ability to handle high reliability service demand with technical solution.

1 Able to read and produce mechanical drawings, electrical drawings and electronics schematic diagrams/ wiring diagrams；

2 Coordinate, schedule and supervise work assignments together with workshop supervisor;

3 Good team player, work closely with the project team to ensure specifications are met;

4 Liaising with sub-contractors and suppliers and inter department personnel;

5 Submission of final costing to Finance Department;

6 Perform other ad-hoc duties as assigned by superiors

Job Description & Requirements

Duties & Responsibilities

• Assist the Team Leader and Job Captain in the performance of their duties
• Supervise the other design drafting team
• Ensure quality and accuracy of designs
• Ensure compliance with project Design Criteria/Client Brief/Approved Concept
• Ensure compliance with relevant design standards and office standards
• Attend and participate in design meetings
• Ensure compliance with ISO Quality Procedure Manual

Requirements

• A bachelor’s degree in mechanical engineering recognised by Professional Engineers Board.
• Entry level with some consultancy internship experience are welcome to apply
• 1-2 years of design experience in consultancy firm would be advantageous
• Must have prior hands-on design experience in the design of ACMV, Fire and Hydraulic services for large scale building projects
• Experience in Rail and infrastructure projects and data centre an advantage

Additional Requirements:

• Good interpersonal and communication skills
• Must be fully familiar with local and international codes
• Hands-on experience with relevant engineering software and BIM
• Must be able to work independently
• Must have a good understanding of unit costs of the MEP services in various types of projects

Job Description

• Develops and manages new designs in accordance with project requirements and objectives, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Proficiency in CAD software for 3D modeling and technical drawings, SolidWorks knowledge will be preferred.
• Strong understanding of materials and manufacturing processes. Knowledge in machining, metal forming, heat treatment and casting are preferred.
• Knowledgeable in design principles, such as springs, bearings and hydraulics, and in theoretical calculations related to the field of statics, dynamics and kinematics.
• Keen interest and experience in a hands on approach towards the construction of prototypes and testing.

Company Write Up:

Durapower is 15 years in operations and is company identified by Enterprise Singapore to scale up for growth as well. We have projects in Netherlands, Singapore, Thailand and Southeast Asia regions, production is in China as a manufacturing plant. There is no manufacturing here, but we have R&D team here liaising with China as well to execute trade of cells, battery modular systems packs enabling green industry applications. Our expansion is also enhanced by the stakes and investment in us through Banpu Next (Banpu Group) which is listed on the Thailand Stock Exchange.

You may refer to the news here: https://en.prnasia.com/releases/apac/durapower-to-advance-global-expansion-plan-after-us-70-million-investment-from-banpu-next-394762.shtml

Video by Management on Durapower:

https://www.linkedin.com/posts/activity-6945009405591465984-ew1t?utm_source=linkedin_share&utm_medium=member_desktop_web

This position will be supported by Enterprise Singapore on the Singapore Global Executive Programme (Companies) (enterprisesg.gov.sg).

You may read up on Durapower's Management Associate Programme - Durapower-management-associate-programme – Durapower Group.

Job Description: Mechanical Engineer (ESG-SGEP)

The specialization of this job role will enable mechanical & structural design initiatives.

Responsibilities

· Serve as local design lead for customized design and pre-sales proposal, platform design, design-changes, trials, and root-cause analysis.

· Own mechanical and structural analysis using CAE tools.

· Own basic on-site component and system level testing to support design and specification changes, coordinate validation testing for changes with global team.

· Organize Root-Cause & Corrective Analysis for design issues

· Collaborate directly with Manufacturing, Process, and Quality to solve yield barriers and scrap issues

Requirements

· Degree with less than 3 years of experience in Mechanical Engineering

The Company
Our client, a global leader in the chemical industry, is seeking a Mechanical Engineer to join their chemical manufacturing team. This role reports directly to the Head of Engineering.

The Role
As a Mechanical Engineer, your key responsibilities will include:

• Planning, executing, and optimizing preventive, predictive, and corrective maintenance activities using FMEA and RCM methodologies.
• Diagnosing and resolving mechanical issues to minimize downtime and enhance equipment efficiency.
• Monitoring equipment performance metrics and recommending upgrades or modifications where necessary.
• Incorporating sustainable practices into maintenance operations, with a focus on energy efficiency and waste reduction.

QUALIFICATIONS

• A Bachelor’s degree in Mechanical Engineering or a related discipline.
• At least 3 years of experience in mechanical or maintenance engineering, preferably within the chemical, petrochemical, or manufacturing sectors.

If you are interested to explore this opportunity, you may send your updated CV to me at [email protected].

We thank you for your interest in this position. Due to the anticipated overwhelming responses, we regret that only successfully shortlisted applicants will be contacted.

Heny Lim
EA Registration No.: R22105263
Hudson Global Resources (Singapore) Pte Ltd
EA Licence: 23C2056

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP).

This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement. Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP. AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure. You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP.

You can apply here: https://aces.aceplp.com.sg/apply/nt/