· Ensure thorough understanding of project terms and requirements.

· Review detailed drawings, and provide technical advice on practical design and construction.

· Prepare, schedule, coordinate and monitor the assigned projects.

· Prepare, update and maintain document summary or the necessary documents for projects.

· Prepare and submit the required engineering reports, documents, and drawings to the relevant authorities for approval.

· Update, manage and compile schedules of assigned projects with accurate data and report to the manager.

· Interact with clients to interpret their needs and requirements.

· Cooperate and communicate effectively with the project participants to provide assistance and support, to meet delivery timeline, optimize cost efficiency and meet customer specification.

· Feedback on workflow issues to manager in order to enhance efficiency and productivity.

· Manage all expected / unexpected change orders or deviations during project execution.

· Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

· Any other job as assigned by the Management from time to time.

Responsibilities:

• Keep abreast of progress and provide instructions to ensure work is carried out as planned.
• Able to manage budgets and procure and manage materials and equipment appropriately.
• To formulate plans, check progress and control quality.
• To check Ship design drawings and technical specifications
• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Able to prepare progress reports and reports to head office.
• Maintain appropriate technical drawings, specifications, and reports.
• Identifying and resolving problems occurring in the field and proposing improvements to increase efficiency and quality.
• Facilitate coordination with relevant parties (shipyards, classification societies, manufacturers, etc.) to ensure smooth operations.
• Manage work teams, liaise with other departments, and coordinate effectively with clients.
• Communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Requirements:

• Minimum 12 years of ship maintenance management experience with a degree in Mechanical Engineering or a recognised degree in the relevant field subject to the acceptance of the engineer.
• Proven track record in the ship of maintenance management

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Experience in large size of dredging & reclamation project sites over SGD 500M
• Experience in design, calculation, planning and modification of ships and ships equipment.

⮚ Jack-up Vessel

⮚ Cutter Suction Dredger

⮚ Trailing Suction Hopper Dredger

⮚ Anchor Handling Vessel

• Good knowledge of marine engineering and structural mechanics
• Experience in planning large-size crane equipment.
• Good knowledge of the ClassNK survey
• Well-versed in ship maintenance requirements
• Good written and interpersonal skills
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting / finding the root cause.

• Possess a recognized degree/diploma in Mechanical/Electrical Engineering with at least five years of relevant experience in building projects.
• Provide technical and engineering support to the Project Team.
• Good knowledge of applicable codes/regulations and Authorities’ requirements relating to M&E services, building construction and safety.
• Provide the M&E schedule to tie with the Master Schedule.
• Supervise and coordinate all M&E works.
• Coordinate for RI(M&E) Inspection and TOP.
• Liaise with consultants, NSCs, DSCs and authorities on M&E matters.
• Ensure safe work procedures are implemented to control risks.
• Produce the coordinated services drawings (CSD).

Job Description & Requirements

· To carry out wire rope replacement for port cranes.

· Perform other related duties and responsibility as assigned by superior.

Requirements

· Physically fit.

· Positive working attitude and team work.

Work Location

. PSA Terminals (e.g Brani, Keppel, Pasir Panjang, Tuas)

A Mechanical Construction Manager in the Bio-Pharma industry oversees the planning, execution, and delivery of mechanical systems in pharmaceutical facilities. This role demands a deep understanding of the industry's regulatory standards and specialized systems.

Roles:

Project Leadership:

• Manage all mechanical construction activities to ensure timely project completion.
• Act as a liaison between project stakeholders, including clients, engineers, and contractors.

Regulatory Compliance:

• Ensure mechanical systems comply with bio-pharma industry standards such as GMP, FDA, and ISO requirements.

Technical Expertise:

• Provide guidance on specialized systems such as HVAC, cleanrooms, utility systems, and process piping.

Resource Management:

• Oversee the allocation of manpower, materials, and equipment to optimize efficiency.

Responsibilities:

1. Planning and Coordination:

• Develop detailed schedules and workflows for mechanical construction activities.
• Coordinate with cross-functional teams, including civil, electrical, and process engineers.

2. Supervision and Execution:

• Oversee the installation of critical systems such as:
  • HVAC for temperature and humidity control.
  • Process Piping for clean utilities like water for injection (WFI) and clean steam.
  • Compressed Air Systems and other mechanical utilities.
• Ensure cleanroom mechanical installations align with industry cleanliness classifications.

3. Quality Assurance and Testing:

• Conduct inspections and supervise the testing and validation of mechanical systems.
• Ensure adherence to design specifications, quality standards, and regulatory requirements.

4. Compliance and Safety:

• Ensure all activities follow safety regulations and risk management protocols.
• Maintain compliance with bio-pharma industry standards and certifications.

5. Budget and Resource Management:

• Monitor project budgets, cost estimations, and resource allocations.
• Manage procurement and delivery schedules for mechanical equipment and materials.

6. Troubleshooting and Problem-Solving:

• Identify and resolve issues related to mechanical construction, design discrepancies, or on-site challenges.
• Provide quick and effective solutions to minimize delays.

7. Documentation and Reporting:

• Prepare and maintain accurate records, including:
  • As-built drawings.
  • Commissioning and validation reports.
  • Progress updates for stakeholders.

8. Team Leadership:

• Supervise and mentor on-site mechanical teams and contractors.
• Conduct training sessions on bio-pharma-specific mechanical systems and best practices.

9. Project Handover:

• Ensure mechanical systems are fully functional and validated before project handover.
• Collaborate with operations teams to transition systems for facility use.

Prepare costing for new project
- Prepare shop/As built drawing for submission to authorities using Autocad software
- Prepare documents for the submission of drawings to relevant authorities
- Going out to sites for checking and inspection
- Any other related work assigned by the Company
- NITEC/Higher NITEC in Mechanical or related field
- Familiar with Autocad software/Microsoft Office
- Do not mind travelling to sites
- With working experience prefered
- Able to work and communicate with people from many other countries

58 RECRUITMENT PTE. LTD

12C5922

67026282

Job Description: •

*Handle daily warehouse operations such as packing, receiving, loading, and unloading of goods.

*Ensure goods are correctly prepared for delivery.

* Fulfil all assigned deliveries on time, as per schedule.

* Upkeep and maintain good housekeeping of the warehouse.

*Perform any other duties as and when assignedRequirement.

*Candidate must possess a valid Class 3 driving license with good driving record •

*Requires to handle heavy loads/ items

*Good team player who is able to work independently when required. •

* Well-organised and possess a positive, keen-to-learn attitude.

* Lorry mechanical knowlege will be prefered

* Lorry need to clean everyday and makig as new lorry.

*After driving need to go marketting for manpower sites

* Collecting payments friom client office, wokers pick up from sites morning and evening.

* Minimun work everyday 8hrs, if sunday any urgent work must be present.

• Main Contractor for Oil & Gas projects
• 5 Days | Jurong Island
• Candidates handling Mechanical QS duties is highly preferred

Our Client is a leading Civil Contractor that provides engineering & construction for Civil & Infrastructure projects. With increasing projects in the pipeline locally & overseas, they are seeking experienced and professional individuals to join their local team.

Responsibilities

• Manage contract and subcontract administration, including preparing progress claims, handling variation orders, and verifying claims from subcontractors and suppliers

Requirements

• Diploma or Degree in Quantity Surveying or Mechanical Engineering, with at least 7 years of experience as an M&E Quantity Surveyor.
• Strong technical expertise in measurement, cost estimation, construction technology, contracts, and legal aspects.
• Proficient in professional practice and contract administration processes.
• Capable of independently managing QS functions within a project and demonstrating strong teamwork skills.
  

OTHER INFORMATION:
• Location : Jurong Island/West Side
• Working days : 5 Days
• Salary : up to S$6,500 / Negotiable + VB (salary will commensurate according to experience & qualifications).

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) by clicking the ‘Apply link’ /

or call 6590 9957 or 9178 0355 for a confidential discussion.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at

https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resume provided to us does not contain your full NRIC number and full home address during your job application.

Responsibilities:

• Responsible to lead a team of M&E personnels.
• Acquire approval scope of works and ensuring compliance with regulations and project requirements.
• Oversee and manage all aspects of the construction M&E works process.
• In-depth understanding of project specifications, technical details and construction drawings.
• Monitor and ensure that site progress is in accordance with the master program with no delay in works and proper work sequencing.
• Attend site meetings with the client and all sub-contractors to review project progress.
• Monitor and report project details including progress, risks and resolve MEP-related issues in a timely manner.
• Define clear roles & responsibilities and deliverable requirements in terms of both scope and schedule to all project personnel.
• Lead and supervise project personnel on site to ensure construction activities are carry out effectively and timely.
• Assist to the Project Director and any other job-related ad hoc duties.

Requirements:

• Candidate must possess at least Diploma/Degree in Mechanical Engineering or equivalent.
• Proficient technical knowledge - measurement, cost estimating, construction technology, contracts and law.
• Understand and be competent with professional practice and contract administration processes.
• Required language(s): English
• At least 3 Year(s) of working experience in the related field is required for this position.
• Self-motivated with good team player and positive attitude.
  

Employer questions
Your application will include the following questions:

• Which of the following statements best describes your right to work in Singapore?
• What's your expected monthly basic salary?
• How many years' experience do you have as an Electrical Project Manager?
• Which of the following Microsoft Office products are you experienced with?
• How many years' experience do you have in the construction industry?
• Which of the following languages are you fluent in?
• Are you available to work on weekends or public holidays?

Candidates are expected to:-

• Carry out repair, maintenance, and troubleshooting of machinery onboard PSA Marine harbour crafts
• Liaise with Fleet Operations team on breakdown reports and harbour crafts status
• Perform lathe machining, basic gas welding, and cutting works to facilitate repair to machinery
• Assist in lifting activities, forklift operation, confined space assessment
• Perform proper disposal of used oils and chemicals

The ideal candidate should preferably:-

• Possess at least a Nitec in Marine Technology, Electrical Engineering, or Mechanical Engineering
• Be proficient in Microsoft Office applications
• Possess a valid Class 3 driving license and MOM accredited certifications such as SSIC, Safety Supervisor, Lifting Supervisor, Forklift Driving
• Prior experience in performing mechanical fitment, basic gas and TIG welding, hydraulic and pneumatic system troubleshooting will be considered favourably
• Candidates with relevant experience may be considered for a senior position

*New hires may be eligible for a sign-on bonus of up to S$3,000. Terms and conditions apply.

Familiar with Shanghai Purlux ZXJD45025 Perfect Binder Machine.

- At least 3 years of relevant experience.

- To maintain the said machine and be responsible for quality assurance.

- Training new employees to handle and operate equipments/ machineries.

- Organised with an ability to multitask efficiently in a deadline driven environment.

- Self- motivated with good interpersonal and communication skills.

- Daily reporting on jobs related matters.

• Main Contractor
• 5 Days | West
• Candidates handling Mechanical QS duties is highly preferred

Our Client is a leading Civil Contractor that provides engineering & construction for Civil & Infrastructure projects. With increasing projects in the pipeline locally & overseas, they are seeking experienced and professional individuals to join their local team.

Responsibilities

• Manage contract and subcontract administration, including preparing progress claims, handling variation orders, and verifying claims from subcontractors and suppliers

Requirements

• Diploma or Degree in Quantity Surveying or Mechanical Engineering, with at least 5 years of experience as an M&E Quantity Surveyor.
• Strong technical expertise in measurement, cost estimation, construction technology, contracts, and legal aspects.
• Proficient in professional practice and contract administration processes.
• Capable of independently managing QS functions within a project and demonstrating strong teamwork skills.
  

OTHER INFORMATION:
• Location : West
• Working days : 5 Days
• Salary : up to S$6,500 / Negotiable + VB (salary will commensurate according to experience & qualifications).

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) by clicking the ‘Apply link’ /

or call 6590 9958 for a confidential discussion.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at

https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resume provided to us does not contain your full NRIC number and full home address during your job application.

Job Description:

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Requirements:

• Degree / Diploma in Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred.
• Proficient in MS Excels, Words, Power Point, etc.
• Excellent communication and coordination skills.
• Be a self-motivated, confident individual, confident in interacting with senior team members, clients and consultants.

• Location: Penjuru

• Working day: 5.5 days

Job Scope:

• Utilize diagnostic tools and equipment to accurately identify mechanical, electrical, and hydraulic issues in forklifts.

• Analyze and resolve operational issues by identifying root causes and implementing effective solutions.

• Perform repairs and preventative maintenance tasks, including replacing defective parts, lubricating components, adjusting brakes, and ensuring all forklifts operate efficiently and safely.

• Source, order, and install replacement parts, coordinating with suppliers to ensure components meet quality standards.

• Conduct thorough safety checks on forklifts, inspecting brakes, steering systems, lights, and other critical safety features to ensure compliance with regulatory standards.

• Maintain accurate records of all maintenance and repair activities, ensuring compliance with maintenance schedules and tracking each forklift's service history.

Requirements:

• Good to have technical and mechanical knowledge

• Must have Electrical knowledge

• Training is provided.

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Our culture believes in Powering Your Potential . We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems.

We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about.

We are looking for a talented Lead Technician - Mechanical to join our team based in Tuas, Singapore. This is an Onsite role reporting to the Service operation Manager. This role will also require travelling within Singapore. Reporting to the Service Supervisor, this role provides support for all Cummins products, primarily in Automotive, Industrial and Marine applications, in a combination of workshop and field work. You will respond to engine breakdowns and provide technical analysis of failure, warranty support and troubleshooting engineering issues. Previous experience in a similar Service role, and knowledge of High-Speed Diesel engines, is essential.

This position offers a long-term career with a global organisation in the power industry and could be the next step in your successful Service career.

In this role, you will make an impact in the following ways:

Responsibilities:

• Establishes and continually develops productive customer relations and ensures prompt and efficient attention to customer needs.
• Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete complex repairs at customer site.
• Performs preventative maintenance activities as per documented schedules and standards on engines and related components in the field.
• Escalates unresolved issues to product specialists or supervisor.
• Coaches and develops technicians and/or apprentices and transfers knowledge and experience to others; may provide work direction; may review repair plans, parts lists, etc.
• Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.
• Identifies additional sales and service opportunities with customer. Completes training in line with skill and business requirements.
• Maintains service vehicle and tools for cleanliness and proper operation.
• Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor.

RESPONSIBILITIES

To be successful in this role you will need the following:

• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Customer focus - Building strong customer relationships and delivering customer-centric solutions.
• Develops talent - Developing people to meet both their career goals and the organization’s goals.
• Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.
• Manages conflict - Handling conflict situations effectively, with a minimum of noise.
• Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
• Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
• Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
• Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
• Engine Systems Interactions - Interprets and analyzes the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.
• Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
• Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
• Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
• Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

QUALIFICATIONS

Education, Licenses, Certifications:

• Trained Engine Technician (Preferred)
• Vocational diploma from relevant technical institution
• Locally valid driving permit, Class 3 and above This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

• Significant field service work experience
• Expert level knowledge of and/or experience with engine products
• Customer service experience
• Experience providing technical advice and coaching to more junior technicians (preferred)
• Able to write and speak in English language
• Preferably with experience in internal combustion engines
• Experience in Marine environment will be advantageous
• No cross-border relocation provided.
• Team leading experience, 3+ years required.

• To provide maintenance service of all equipment, buildings and facilities.
• Ensure that plant equipment and utilities are operating smoothly with good performance.
• Carry out planned maintenance and breakdown maintenance as instructed by Line Manager.
• Lead repairs, improvement projects implementation and liaise with vendors/contractors on scope of work.
• Provide emergency / unscheduled repairs of production equipment. Perform redesign and improvements to equipment for better capability, performance and ensure compliance to management of change process.
• Keep track of spare part and inventory usage to maintain spare part / inventory control.
• Lead Root Cause Failure Analysis and ensure action follow-up to prevent recurrence of breakdowns.
• To prepare Safety Risk Assessment (SRA), Work Instruction (WI) and Troubleshooting Know-How and other training materials when needed.
• To identify opportunity and drive continuous improvements in cost saving, quality and yield.
• Ensure compliance of company QHSE policy & local EHSS Legislations.
• Participate actively in Quality Health Safety & Environment (QHSE) activities (E.g. Trainings, Concern Reporting, Safety Risk Assessment (SRA) Review, correction of QHSE hazards and unsafe conditions).
• Plan and perform preventive maintenance on all production equipment according to company’s ISO, GMP, HACCP and QHSE requirements.
• Conduct housekeeping in work area and ensure compliance of site safety regulations to prevent accidents.
• Any other duties and responsibilities as assigned to you from time to time.
• Experience in a process plant maintenance.
• Experienced in Rotating equipment, centrifugal, pumps, agitators, compressors, statics, vessel, pressure, tanks, preventive, predictive, major repair & major overhaul.
• Advantages Skills/Certifications : Work At Height(WAH), Confined Space, Vibration, Welding, Forklift, SAP Plant Maintenance(PM) Module, spare parts inventory warehouse management & Risk assessment,

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Technician
• Working Location: Ang Mo Kio
• Working Hours: 5 Days/ 6 Days per week, 9am – 6pm
• Salary Package: Basic Salary + OT + AWS
• Duration: Permanent

Key Responsibilities

• Install, maintain and repair electrical machines.
• Identify and diagnose issues with machinery to perform timely repairs.
• Perform routine maintenance and inspections to ensure optimal performance.
• Assist with the development of existing or new machines.
• Helps in the sourcing of machine parts and liaise with vendors when required.
• Other ad hoc duties as assigned.

APPLY NOW!!!

• Proven experience in the electrical and machinery fields.
• With good understanding of electrical systems.
• Technical drawing knowledge is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Provide routine, preventive and corrective maintenance, troubleshooting and overhaul on process equipment such as piping, pressure vessel, pump, compressor, etc.

• Diploma or NITEC in a relevant Engineering discipline
• At least 3 years' relevant experience in an oil refinery/petrochemical plant
• Candidates without relevant experience may be considered for entry-level positions.

The ideal candidate should have expertise in mechanical and electrical systems, facilities management, and safety protocols. He should lead technical teams, coordinate vendor services, and manage equipment maintenance, ensuring compliance with Environmental Health and Safety (EHS) standards for smooth operations. If you are seeking to further your career in a dynamic environment, we encourage you to apply!

The Job

• Assist the General Manager in overseeing day-to-day mall operations, ensuring all systems and facilities are functioning efficiently.
• Coordinate and execute maintenance programs to maintain optimal operational levels.
• Prepare and manage the annual maintenance budget.
• Administer and oversee maintenance contracts, ensuring adherence to budgetary guidelines and cost efficiency.
• Manage the cyclical replacement and enhancement of equipment within the mall, coordinating with the procurement team.
• Address feedback, service requests, and operational needs in a timely manner.
• Lead technicians and manage vendor services, ensuring professional standards are met in daily operations.
• Participate in the Company Emergency Response Team as a Site Incident Controller or First Aider.
• Collaborate with the Environmental Health and Safety (EHS) team for the review and approval of work permits (PTWs), risk assessments, and safety audits.

The Talent

• Degree or Diploma in Engineering (Mechanical/Electrical), Real Estate, Facilities, Building, or Estate Management.
• Demonstrated initiative, leadership, and strong interpersonal skills.
• Capable of working within tight timelines and handling problem-solving efficiently.
• Excellent communication skills to manage internal and external stakeholders.
• Willingness to work beyond standard hours and adapt to potential lateral role transitions between asset classes based on business needs.
• Able to commence immediate

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job scope:

• Dealing with all related stakeholders for the M&E projects
• Understanding market price trends
• Capable of administrate on ACMV/Electrical tender and tendering procedures
• Controlling, planning for strategy of all tendering duties
• List the scope of work and commercial requirements in order to determine the risks of the projects
• Preparing and follow up on the Request For Quotations to suppliers/sub-cons in order to ensure tender costing and technical data to be submitted on time
• Taking off Bill of Quantities from the ACMV Drawings, Points of Schedules and
• Architectural drawings
• Collating price comparison, costing summary and technical proposal in order to prepare tender submission
• Studying the addendum and/or corrigendum documents and update costing summary with technical proposal accordingly

Diploma/Degree in any engineering related field

Quantity surveyor experience from M&E construction field

Salary up to $4000

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Responsibilities:

• CAD Modeling: Work with detailed 3D models and assemblies using industry-standard CAD software to design robotic components and systems.
• Mechanical Design: Collaborate with senior engineers to develop mechanical designs that meet project requirements, including structural integrity, functionality, and manufacturability.
• Prototyping: Assist in the prototyping and testing of mechanical components and systems to evaluate their performance and make necessary improvements.
• Documentation: Prepare technical documentation, including design specifications, drawings, and reports, to communicate design concepts and results effectively.
• Collaboration: Work closely with cross-functional teams, including colleagues on other engineering teams, project managers, and the production team to ensure seamless integration of mechanical systems within robotic platforms.
• Problem Solving: Identify and troubleshoot mechanical design issues, providing creative and practical solutions to engineering challenges.

Requirements:

• Polytechnic/University undergraduates currently pursuing diploma/degree in Mechatronics, Robotics, Mechanical, Electrical, Electronics, Computer Engineering or a related field.
• Strong interest in robotics and automation technologies.
• Strong analytical and problem-solving skills.
• Strong communication skills in English (both oral and written)
• Proficiency in CAD software, such as SolidWorks or AutoCAD
• Strong understanding of mechanical design principles and fundamentals.
• Eagerness to learn and apply new engineering concepts and technologies.
• Excellent communication and teamwork skills.
• Attention to detail and a commitment to delivering high-quality work.
• Preferred: Knowledge of materials science and manufacturing processes.
• Preferred: Experience with 3D printing and rapid prototyping.

Job Responsibilities: -

Conduct regular inspections and preventive maintenance on Fire Protection Systems and associated mechanical and electrical equipment

Diagnose and troubleshoot on Fire Protection Systems and associated mechanical and electrical equipment

Perform necessary repairs and replacement of defective items to ensure optimal performance of Fire Protection Systems

Managing of customer’s site location system and replacement

Managing site maintenance service and support

Managing customer relationships

Ensure all customer requirements and needs are fulfilled with proper follow up through administrative and technical compliance

Gather information from customers for improvement and opportunities to meet their needs

Coordination within internal business units of Company to ensure fulfilment of job activities through technical compliance

Coordinate with suppliers to ensure all customers’ requirements and needs are fulfilled through technical compliance

Qualifications & Requirements

• Diploma or Certificate in Mechanical/Electrical Engineering
• At least 2-3 years of experience in maintenance, repair, troubleshoot of Mechanical/Electrical Systems, preferably in pump systems and water tanks.
• Preferred with Fire Protection Safety background
• Able to start work immediately
• Class 3 Required (2 Years Driving Experience)
• Excellent communication and interpersonal skills
• Able to communicate with Client and write technical reports
• Responsible with minimal work supervision
• Proficient in Microsoft office and able to correspond via email
• Competent, Meticulous & Committed

Skills

• Strong knowledge of mechanical and electrical systems, including pumps, motors, control panels and water tanks.
• Proficiency in using diagnostic tools and equipment for troubleshooting
• Ability to read and interpret technical drawings and manuals
• Strong problem-solving skills and attention to detail
• Good communication and teamwork skills