JOB DESCRIPTION

• All Contracts administration works

• Preparation of plans, contracts, budgets and other documentation

• Quantity take off, cost estimate, contract administrations and support in tender exercise

• Documents preparation for sourcing of quotations for both pre and post tender stages

• Preparation of tender evaluation, conduct negotiation with subcontractors & suppliers

• Liaise with the Procurement Department to ensure that all material are procured in accordance with the project schedule

• To monitor and keep track of the project expenses and try to optimize the project profit.

• To attend progress meetings, technical meetings, material submission meetings and etc to capture all variation claims and potential variation works and time implication

• Responsible for preparation and timely submission of claims, variation orders, budget & cost control and settlement of final account.

• To ensure a timely closure of all main contract and subcontract final accounts.

• Risk analysis evaluation

• Feasibility studies

• Any other adhoc duties when required.

Requirements :

• Possess degree/diploma (Mechanical Engineering / Electrical Engineering /Building/ Quantity Surveying) or similar

• Minimum 2 to 3 years of work experience in Construction industry

• Good written communication skills

• Good track record

• Able to work on multiple projects, within simultaneous timeline

• Maintenance and Troubleshooting: Perform routine maintenance and troubleshooting on electrical systems, equipment, and machinery to ensure optimal performance.
• Installation: Install, test, and commission electrical equipment and wiring as per the company’s standards and technical specifications.
• Electrical Repairs: Diagnose and repair faults in electrical systems, components, and circuits, using a variety of testing equipment.
• Safety Compliance: Ensure compliance with all electrical safety regulations, codes, and company safety protocols at all times.
• Preventative Maintenance: Implement and maintain a preventative maintenance schedule to minimize equipment downtime and extend the life of electrical systems.
• System Upgrades: Assist in the upgrading or replacement of obsolete electrical components and systems to improve efficiency and performance.
• Documentation: Maintain accurate records of inspections, repairs, and maintenance work done, as well as any changes to system designs or installations.
• Night Shift Coverage: Provide support during night shifts as needed, ensuring that electrical systems are operational during off-hours.
• Emergency Response: Be on-call to respond to emergency breakdowns or electrical faults during nights or weekends, ensuring minimal downtime.
• Team Collaboration: Work closely with engineers, maintenance teams, and other departments to identify and resolve electrical issues and ensure seamless operations.

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure the timely completion of given tender assignment

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Able to work a under tight timeline
• Must be team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

机电经理（M&E Manager）

Job responsibilities（工作职责）：

(1) Lead and oversee all M&E engineering activities in construction projects, ensuring adherence to design specifications, approved drawings, and project timelines.

(2) Manage the planning, scheduling, coordination, and integration of M&E systems installation and commissioning.

(3) Supervise M&E subcontractors and vendors, ensuring quality work, safety, and compliance with contractual obligations.

(4) Monitor and track the progress of M&E works, providing regular updates to senior management and stakeholders.

(5) Coordinate with architects, engineers, project managers, and other departments to resolve technical issues, discrepancies, and ensure seamless integration of M&E systems with other building components.

(6) Ensure compliance with regulatory standards, building codes, and quality assurance requirements (e.g., CONQUAS, QM).

(7) Liaise with clients, consultants, relevant authorities, and subcontractors regarding M&E issues, ensuring effective communication and problem resolution.

(8) Ensure M&E works comply with Safe Work Procedures and safety regulations throughout the installation and commissioning process.

(9) Prepare and submit M&E-related documentation, reports, and progress updates as required by the project schedule.

(10) Handle any other ad-hoc duties or tasks as assigned by management.

Requirements（要求）：

(1) Degree in Mechanical & Electrical Engineering or related fields; PE Board recognized degree is preferred.

(2) Minimum 8 years of relevant experience in the construction industry, with strong M&E project management expertise and at least one completed project cycle.

(3) Possess Green Mark Accredited Professional (GMAP) certification is a plus.

(4) Experience with MOHH or HDB projects is a plus.

(5) Proficient in Autodesk Revit, BIM software, or other M&E design tools.

(6) Strong leadership, organizational, and project management skills, with the ability to supervise teams and manage multiple tasks effectively.

(7) In-depth knowledge of M&E systems, installation methods, and industry standards.

(8) Good speaking and writing in both English and Chinese.

(9) With a actual experience of large-scale public building renovation and good relationship with the authorities will be preferred.

Responsibilities:

• To keep track of all tender documents, drawings and corrigendum base on the document control process
• To verify tender drawings/details and prepare tender enquiry
• To assist in quotations, selection of qualified subcontractors/vendors and distribution of relevant tender documents
• Perform quantity take-off for tender projects based on timeline
• Assist with tender evaluation and preparation of tender documents for submission
• Ensure all documentary evidences and contemporary records are documented, filed and complied for substantiation purposes
• Able to read M&E drawings
• Site verifications of variations and taking records for submissions of claims
• Assist project manager/designated staff to evaluate and certify completed work
• Assist in verifying sub-contractor’s claims
• Monitor and report on balance amount

Requirements:

• Candidate must possess at least a Diploma/Advanced/higher/Graduate Diploma in Quantity Survey or Mechanical Engineering or equivalent
• Minimum 3 years QS experiences
• Knowledge & experience in M&E system requirements
• Able to work under pressure and meet tight deadline
• Able to work independently with minimum supervision
• Good knowledge and skill set in Microsoft Office
• Fast learner and willingness to explore new skill sets/technologies

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Abie to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Manufacturing (O&G)
• Position Title: Mechanical Engineer
• Working Location: Jurong East
• Working Hours: 5 days (Monday to Friday (9 AM - 6 PM)
• Salary Package: Basic Salary up to $7,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment design, hands-on assembly, testing, troubleshooting, and supporting projects related to jacket flooding systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the O&G industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66240 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Support and assist the SRE / RE / RA in duties, review all project drawings and specifications, and raise any discrepancies and/or possible problems before construction work commence on site
• Supervise the construction and related works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, drawings
• Report to the supervising Qualified Persons any work that are not constructed according to the building approved plans, project drawings including shop drawings;
• Report to project manager and/or project consultants any work that are not constructed according to the specifications and drawings;
• liaise with the supervising Qualified Persons and their engineers/architects / specialists on the review and approval of revised designs, amended drawings, specialist drawings, sketches, etc.
• Assist in the review of contractor’s method statements and working procedures, and to ensure that they are followed on site;
• verify progress payment claims, all other claims and reports submitted by the contractors;
• keep and review records of works including materials, samples, site equipment, inspections, test reports and ensure proper documentation, keep track of all records and forms
• oversee the maintenance of the site office, its cleanliness and orderliness, proper filing systems, plans

Requirements

• Diploma in Mechanical Engineering or equivalent from Singapore Polytechnic or other tertiary institutions of equivalent standing; and
• Possess at least 5 years of relevant and practical experience on site.

JOB RESPONSIBILITIES

• Perform basic drafting

• Prepare design drawings / calculations / schematic diagrams / reports for;

o Mechanical ventilation system

o Fire protection system

• Perform prescriptive / performance-based submissions to Fire Safety Department (FSD)

• Attend meetings with clients, consultants, inspectors and authorities

• Perform basic report writing (optional)

• Perform CFD simulations (optional)

• Perform occupants evacuation simulations (optional)

REQUIREMENTS

• Basic numerical and communication skills (written and verbal)

• Able to work in teams

• Attention to detail and iterations

• Candidate is expected to be autonomous under supervision and guidance

• Basic familiarity with Fire Code 2018, local code of practices and standards

• Familiarity with software (Mandatory)

o CAD

o Microsoft Word

o Microsoft Excel

o Microsoft Powerpoint

• Familiarity with software (Optional as training will be provided)

o Corenet

o Pyrosim

o Fire Dynamic Simulator

o Pathfinder

ACADEMIC QUALIFICATIONS

• Minimum B.Eng. (Mechanical) from a recognised institution.

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical Engineering (ACMV, Fire Protection) or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Description:

• Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineers are expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

Qualifications:

• Degree holder with min. 5 years’ experience or Diploma holders with 8 years’ experience in design and implementation.
• Able to multi-task and work in a fast paced environment
• Possess initiative, drive and ability to work independently
• Good interpersonal/communicational skills
• 4.5 days’ work week
• Experience in construction industry would be an added advantage

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Daniel Lim

Registration Number: R24124455

AlwaysHired Pte Ltd

EA Licence No: 24C2293

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Mechanical Service Engineer/Mechanical Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9 am – 5.30 pm (One Saturday per month, 9 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Perform engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• Conduct other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• Provide a service report with necessary recommendations & findings.
• Provide technical support for site engineers and customers whenever necessary.

APPLY NOW!!!

• Entry-level candidates with Higher Nitec, Diploma or Degree in Mechanical Engineering.
• Able to read and understand basic Mechanical diagrams.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66137 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Roles & Responsibilities

- Prepare drawing for submission to authorities using Autocad software

- Prepare documents for the submission of drawings to relevant authorities

- Going out to sites for checking and inspection

- Any other related work assigned by the Company

- Familiar with Autocad software/SOLID WORKS

- Do not mind travelling to sites

- With working experience prefered

- Able to work and communicate with people from many other countries

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget and set routine maintenance

• Perform site planning, coordination and inspection that related to M&E and facilities

• Responsible in preparing tender specification & post contract and renovation projects

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with FM teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Industry: Manufacturing/ Production

Location: West

Working Hours: Monday Friday, 8:30am 5.45pm

Basic + Allowance + AWS + VB

Job Responsibilities:

• Responsible for 3D product design and its requirements
• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Define test requirements needed for all the designed products
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Bachelor Degree in Mechanical / Industrial
• 1-2 years of relevant experience
• Good exposure in Plastic Injection molded parts design
• Knowledge of product design, engineering plastics behavior, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem-solving skills with strong technical acumen

Please email your updated CV in Words format to [email protected]

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified

EA Personnel: Lim Jing Yee, Lena

EA Registration No.: R1872533

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

EA Licence Number: 02C4944

Tel: 6950 9755

JOBID: L345WWYW

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Requirements:

• Min Diploma in Mechanical Engineering or relevant discipline
• Advanced skills using company software
• Proven ability to communicate well in written and verbal communications
• Design thinking for product inventions and enhancements
• Motivation and commitment to providing interpersonal customer service
• Knowing and applying current industry standards and information
• Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

Recruit Now Pte Ltd

EA License No: 21C0845