Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Attends or conducts daily tool box briefing, weekly briefing and to participate in meetings.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations
• Responsible for day-to-day project supervision for new construction platform on site.
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirement.
• Liaises with client's Mechanical Supervisor for inspection.
• Ensures quality check with on sub-contractors on daily basic.
• Ensures good co-ordination and communication between team members, SRM, Engineers and clients.
• Assists with commissioning activities/troubleshooting on site.
• Ensures equipment and vendor package preservation to follow up approved Production planning and control of day to day activities.

Requirements:

• Diploma in Engineering or related engineering disciplines
• Minimum 3 years of relevant experience preferably in the construction offshore platform industry
• Able to multi-task and work in a fast-paced environment
• Good in planning, organising, interpersonal skills and able to work independently
• Willing to work late hours and shift work

Our Addresses:

Seatrium - Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Maintenance Engineer |

Location: Tuas
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769
Senior Recruitment Consultant

• Design & model 3D skid system, skid structure, piping GA and other not mentioned shop drawing (cutting plan) for fabrication purpose.
• Maintain proper record for drawings and information.
• Proficient in operating CAD drawings software and drawing construction detailed design.
• Create drawings and models from written and verbal specifications obtained from Engineer.
• Reviewing and checking sketches and drawings for errors before being sent to productions, vendors, engineers, etc.
• Review drawings for completeness and accuracy.
• Systematically saving sketches and drawings on CAD library, keeping the server organized; updating files as jobs progress and revisions are made.
• Continually create, edit, and update standard details for use in projects.
• Complete task assigned by superior and performing other relevant duties when needed.

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com.

Purpose and Scope

Responsible for M&E works such as ACMV, Electrical, Plumbing and Sanitary etc

Responsibilities:

• Review project specifications and technical clarifications
• Responsible for M&E works such as ACMV, Electrical, Plumbing and Sanitary etc
• Coordinate with Engineers and Architects, and perform site supervision and co-ordination of M&E works
• Review all M&E shop drawings from design team and submit to consultant

Requirements:

• NTC/Nitec/Diploma in Electrical Engineering or its equivalent
• Minimum 3 years’ relevant experience in construction industry
• Possess M&E Coordination Certificate or CoreTrade Supervisor for M&E
• Experienced in Electrical/Mechanical Construction Works
• Candidate must be able to hands-on whenever project requires.
• Due to the sensitive work nature, only Singaporean applicants will be considered.

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses, and functions.

Accountability – Hold team and self-accountable to deliver on our commitments.

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis to support our client's ongoing project.

*Duration: 1 year (renewable)

*Work Location: Tuas (company transport is provided)

*Working days: 5.5 days

About the role:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with contractors on site.
• Focus on inter-disciplinary construction management by assisting the CRE in coordinating the existing team of discipline Lead Resident Engineers, including liaising with the in-house Engineering Design Manager (EDM) on any outstanding design issues affecting immediate construction activities.
• Lead and coordinate construction work interfaces between contractors, including managing tie-ins and collaborating closely with the counterpart Interface Manager.
• Organize interface meetings between various contractors to facilitate resolution of coordination and tie-in point issues.
• Work with the BIM Manager to set up interface BIM walkthrough sessions as needed with the contractors.
• Provide project delivery planning updates on interfacing and tie-in points, specifically addressing MEICA issues given the project's current stage.
• Coordinate and expedite urgent RFA/RFI submissions regarding interfacing matters, particularly between EPC1 and EPC2.
• Attend site meetings as required by the CRE and work internally to resolve technical issues with contractors concerning interfacing matters, with a specific emphasis on MEICA issues.
• Participate in and follow up on interface and coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, and other relevant sessions, ensuring coordinated completion of the works leading into the Testing and Commissioning phase of the project.

About you:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Design systems and components that meet needs and requirements
• Produce outline designs
• Conduct experiments methodically, analyse data and interpret results
• Test and evaluate theoretical designs
• Identify, formulate and produce effective solutions to emerging problems
• Evaluate final product’s overall performance, reliability and safety
• Alter and modify design to meet requirements and to eliminate malfunctions
• Estimate budget and scope of project
• Solicit observations from operators
• Prepare product reports and documentation
• Engage in lifelong learning and develop new theories or methods

Mechanical Engineer optimize the performance of mechanical products, machinery, and equipment. They assist mechanical engineers to design mechanical products, analyze performance results, and maintain mechanical equipment and machinery. They may be employed in the transportation, industrial, electrical, or manufacturing industries.

As a mechanical engineer, your responsibilities can vary based on the industry and specific role, but they generally include:

1. Design and Development:Create and refine mechanical systems and components using CAD (Computer-Aided Design) software.
   Develop prototypes and test designs to ensure they meet required specifications and performance standards.
   Use engineering principles to solve design problems and improve product functionality.
   
2. Analysis and Testing:Perform simulations and analyses to predict how components will behave under various conditions (e.g., stress, temperature, and load).
   Conduct tests and experiments to validate design concepts and performance.
   
3. Project Management:Plan, coordinate, and oversee engineering projects from conception through completion.
   Manage project timelines, budgets, and resources.
   Collaborate with other engineers, stakeholders, and clients to ensure project objectives are met.
   
4. Manufacturing and Production:Develop and oversee manufacturing processes and procedures.
   Ensure that products are produced efficiently and meet quality standards.
   Work with suppliers and manufacturers to source materials and components.
   
5. Maintenance and Troubleshooting:Monitor and maintain mechanical systems and equipment.
   Diagnose and resolve mechanical issues or failures.
   Implement improvements to enhance reliability and performance.
   
6. Compliance and Documentation:Ensure designs and processes comply with industry standards, regulations, and safety guidelines.
   Prepare detailed documentation, including design specifications, reports, and user manuals.
   
7. Research and Innovation:Stay updated with advancements in mechanical engineering and incorporate new technologies into designs.
   Conduct research to explore new materials, techniques, and systems.
   
8. Collaboration and Communication:Work with cross-functional teams, including electrical engineers, software engineers, and project managers.
   Communicate technical information clearly to non-engineering stakeholders.
   

These responsibilities can vary significantly depending on the specific sector, such as aerospace, automotive, manufacturing, or energy.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

* To provide mechanical engineering design expertise during the detailed design phase

* Will be involved in all aspects of the mechanical engineering design and installation supervision

* Engineering package development for cogeneration, flue gas treatment, pressurized equipment, pump, fan, piping etc.

* To prepare tender documents, b i d analysis, operating & maintenance procedures, mechanical drawings and piping layout.

* Assist in the assessment of construction costs, maintenance cost, and safety studies.

Responsibilities

• Reporting directly to top management, you will have the overall responsibility and authority for the effective management and timely execution of the construction projects
• To lead and manage a team of project engineers with responsibilities in the project management of infrastructure and facilities planning & development.
• Ensure that all aspects met the government regulations and standards, including safety of works, inspections and testing of equipment and machinery, training needs of staff.
• Control and monitor work progress and ensure work quality
• Oversee the effective management of project activities to assure timely delivery and low wastage
• Overall planning and controlling of the cost of project execution
• Manage and lead a group of engineers
• Overall co-ordination of the work progress of large and complex project
• Co-ordination with other departments on issues affecting project works
• Liaise with government/Statutory Authorities, consultants, clients, supplier and others
• Provide timely project progress reporting to management
• Detect Project problems and ensure effective corrective measures are executed
• Other ad-hoc duties as and when being assigned

Requirements

• Candidate must possess at least a Degree / Master in Engineering / Construction or equivalent, recognized universities under the BCA is a plus
• Minimum 5-10 years of experience in project management
• Working experience in local building/construction industry preferred
• Proficient in Microsoft Office, MS Project, Primavera and AutoCad
• Possess excellent interpersonal, people management, good communication and negotiation skills and possess strong leadership qualities
• Efficient, strong analytical skills and able to work independently
• Excellent team spirit and able to lead project team towards project completion on time
• Able to work under pressure to ensure smooth project timeline
• Able to start work immediately or within a short notice

Staff Benefits

1. AWS

2. Annual leave 17 days, up to a maximum of 22 days

3. Transportation reimbursement claims (2 ways from home to office/site)

4. VB – subjective

5. Medical/Dental benefits

6. Insurance – Hospital & Surgery, Personal Accident and Term Life

7. Annual heath screening up to $200

8. Mobile Claims up to $100

Working hour: 8.30am to 5.30pm (5 days’ work week)

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Description of Responsibilities

• To carry out mechanical installation of Automated Materials Handling System (ASML) in cleanroom environment
• Ability to obey, follow, execute, and follow up on instructions by higher management, independently or as part of a team.
• Timely delivery of projects or tasks at hand
• Escalate and highlight any discrepancies, issues, or problems during job progress.
• Create, maintains, and signs off Proof of Delivery (POD) for submission to relevant departments.
• Able to put in compensated extra hours when requested and required due to the unforeseen work environment and schedule.

Key Performance Indicators (but not limited to)

• Timely delivery of projects or tasks at hand
• Punctuality
• Attendance

Career Prospects:

Candidates can aspire to take on leadership role in other areas of work within Build It department

Critical Skills/Knowledge:

• Effective Interpersonal and Communication Skills
• Air-con repairing / mechanic experience will be advantage

Education:

• O'Level and above

Other Considerations:

• Comfortable to work at heights and tight spaces

The Mechanical Technician performs mechanical completion, pre-commissioning and
commissioning activities.

In order to complete Mechanical Completion, Pre-commissioning and Commissioning activities in accordance with the project completion plan and schedule, he should:

• Understand his roles and responsibilities and to be compliant with.
• Understand the project completion execution plan from the Discipline Lead Technician.
• Understand Notification of Energization (NOE) Flow Chart.
• Understand System Drawings and Walk Down procedure;
• Complete a Daily Report to ensure clear visibility to the Discipline Lead Technician.
• Attend the Daily Discipline Tool Box Talk to understand the daily activities;
• Perform the Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team in compliance with the project drawings and specifications.
• Perform the Pre-commissioning Activities (‘B’ Scope ITRs) in compliance with the vendor
  documentations and specifications.
• Support the Operation Test Procedure (OTP) under the supervision of the discipline Lead
  Technician.
• Utilize specific tools and test equipment for the system commissioning in safety and with
  quality.
• Assist field service vendor to conduct the system commissioning
• Comply with the HSSE requirements of the site. Ensure the safety and security of project personnel.
• Assess job related hazards during the development of safe working procedures and pursue
  opportunities to eliminate exposure.
• Attend the specified HSSE training and ensure direct reports are trained.
• Know how HSSE risks are managed and ensure that the HSSE controls for the activities/tasks are communicated. Supervise the safe execution of work and the implementation of controls.
• Communicate and practice in emergency response.
• Engage with team members and contractor staff on HSSE in meetings, pre-job briefings, during toolbox talks and attend key HSSE events. Communicate a consistent safety message, resolve unsafe situations, engage and intervene on unsafe behaviour and reward good safety behaviour.
• Liaise with HSSE department for support.

Requirement:

• Technical College diploma in Mechanical discipline or equivalent
• A minimum of 4 years’ construction or commissioning experiences in Oil & Gas Industry;
  especially for Offshore products and systems.
• Preferably gained within FPSO experience will be a strong selection criteria.
• Completions Tools (ECOM) including documentations
• PTW and JSA

Brunel International S.E.A Pte. Ltd.
UEN No: 199603098R
EA License No: 16S8067
Reza Johannes - R1871121

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is actively searching for a Senior Professional Officer, Mechanical Systems to join their team!
If you are a dynamic individual seeking a new career opportunity, read further!

The responsibilities of this role are:

• Design and teach labs & practice modules.
• Mentor students in Capstone Projects and the Integrated Work Study Programme (IWSP).
• Lead or co-lead innovation projects with industry.
• Manage labs and equipment to support academic programmes and applied research.
• Ensure safety in labs

The ideal candidate will need to have the following qualities and experience:

• A good degree in Mechanical Engineering or a related field. Masters, PhD and/or relevant professional certifications like registered PE would be advantageous.
• Deep technical specialist with 10 or 15 years of working experience in mechanical design, systems design and integration or related area in mechatronics would be preferred.
• Experience in following areas are highly desirable:Complex Mechanical systems development and integration
  Material and components selection including working knowledge with integration and selection of components/systems such as actuators, pumps, hydraulics system, PLC/Controls systems
  CAD software such as SolidWorks
  Simulation such as Finite element and CFD simulation
  Hands-on prototyping and fabrication skills to guide students in labs
  
• It will be advantageous with working knowledge ofMaterial testing and material properties
  Programming of Control and PLC systems
  Software such as Ansys and Abaqus
  
• Extensive hands-on experience and knowledge of industry practices and engineering principles to bring industry perspective to the University
• Keen interest in innovation projects, with demonstrated ability in developing solutions to technical problems.
• Strong supervisory skills and enjoy working closely with students in an educational environment.
• Demonstrate proficiency to keep abreast of development in the field and pursue professional certification programs. Possess industrial certifications in relevant areas will be an added advantage.

An exciting career awaits the right candidate! Click "Quick Apply" to register your interest now.

All applicants' CV will be treated with the strictest confidentiality. We regret to inform that only shortlisted candidates will be contacted.

Responsibilities:

The core responsibilities of this position:

• Support all development phases including design, design refinement, validation, and pilot production of mechanical parts
• Work closely with the R&D teams to determine battery design and mechanical characteristics
• Work with production team to develop processes/tooling for pilot scale manufacturing and optimizing new production methods
• Coordinate and execute product development trials. Summarize and present respective results, with conclusions, and recommendations.
• Develop assembly instructions and specifications, along with other engineering documents.
• Generate drawings, BOMs and follow Document Control methods
• Determine the best practices and most efficient method of achieving a consistent design/drawing package while maintaining configuration control.
• Perform tolerance stack-ups and while calculating dimensions, weight limitations and requirements in materials.
• Work integrally with both the electrical design and mechanical hardware to communicate technical ideas for accomplishing environmental testing involving vibration, shock, altitude, acceleration and temperature/humidity testing.
• Participate in the resolution of hardware problems or process non-compliances working with supervisors of Quality, Engineering and Production.

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694