Engineers are required to provide design and engineering supports to stakeholders on railway, road tunnel and bus infrastructures, carry out technical studies and investigations, technological researches, etc., and the following responsibilities:
• Upkeeping engineering standards, design criteria, performance specifications and technical requirements for air-conditioning and mechanical ventilation systems, fire protection systems, plumbing, sanitary and water services, tunnel ventilation system, lifts and escalators, etc.
• Preparation and evaluation of tenders, review of design submissions by consultants and contractors, site supervision, testing and commissioning, etc.

Requirements:
• Knowledge in Mechanical Engineering
• Senior Engineer: At least 5 years of experience in the design and supervision of mechanical systems/services stated in the above job description.
• Executive Engineer: At least 2 years of experience in the design and supervision of mechanical system/service stated in the above job description.
• Those without experience are also welcome to apply
• Good communication, interpersonal and leadership skills

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• This is a 1-year contract (Renewable) role as CAD Drafter. He/She is responsible for developing and preparing engineering designs and drawing from drawings from preliminary concepts, sketches, engineering calculations, specification sheets, and other data. This role involves interacting with engineers to understand project requirements and deliver accurate draft plans.

Responsibilities:

• Develop and prepare engineering designs and drawings from preliminary concepts, sketches, engineering calculations, specification sheets, and other data.
• Operate computer-assisted design and drafting workstations.
• Design and prepare plans for using computer-aided design and drafting (CADD) software.
• Produce draft and detailed designs and diagrams according to the given specifications
• Revise and correct any errors in the drawings or plans
• Ensure all drawings are compliant with industry standards and specifications
• Interact with engineers to understand project requirements and deliver accurate draft plans.
• Maintain updated knowledge of AutoCAD software, drafting standards, and industry trends
• Assist in the production of parts list, BOM, reports, and schedules.
• Produce and manage 2D & 3D drawingsfor various disciplines such as structural, P&ID (Schematic), General Arrangements and Layouts, etc..

Requirements:

• Minimum Diploma in chemical or instrumentation or any related module is preferred.
• Minimum 3 years of working experience as CAD Drafter, who has the capability to read construction documents and specificiations.
• Good knowledge of engineering background.
• Proficiency in Microsoft excel and word.

Other information:

• Contract Duration: 1 year contract (May be renewable)
• Working hours: 830am - 530pm (Monday to Friday)
• Package: Basic + Completion bonus

We regret to inform that only shortlisted candidates will be notified.

By responding to Yokogawa’s advertisement, consent is considered given to Yokogawa to collect the required personal data for the purpose of recruitment with expectation that Yokogawa will protect personal data with security safeguards that are reasonable and appropriate to the sensitivity of the personal data, to protect it from unauthorized access, use or disclosure and complies with applicable regulatory requirements with respect to the retention of personal data

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Due to expansion of our client's business, we continue to look for suitable candidates to work at our client's site. Write to us if you are an individual who has experience in the activities listed below, and is keen to take up new challenges!

Responsibilities:

• Assist BIM coordination, create and edit BIM models.
• Understand other trades that involve electrical/mechanical and draw electrical/mechanical drawings in layout and single line diagram.
• Complete BIM/AutoCAD drawings timely and quality manner.
• Prepare proposal, shop & as-built drawing.
• Prepare coordination drawing.
• Conduct clash detection and conflict solution.
• Perform site survey and inspection to ensure precision of drawing.
• Attend contractors meeting and update keep the Engineers involved up-to-date for any changes or new requirement
• Review design drawings demo contractors and vendors
• Prepare and print out as-built drawings for OMM, ensuring the accuracy in drawing
• Follow up with comments from client and consultants on as-built drawings

Requirements:

• Diploma / Degree / ITE / BCA or its equivalent
• Minimum 3 years hands-on experience in BIM Modelling using Revit and AutoCad Software
• Knowledge in Naviswork and Rendering Software is an advantage
• Experienced in modelling and drafting M&E and Fire Protection Services
• Familiar with Singapore CIM Guidelines and Code of Practice
• Background in Data Centre is an advantage
• Is a team player and able to work with minimum supervision and under pressure

Please send your cv to

• [email protected]
• in word document;
• listing your personal particulars, education qualification and work experience;
• listing your current and expected salary details.

As we are hiring this position urgently, we do look forward to hearing from you VERY SOON!

Only shortlisted candidates will be notified.

EA Licence No: 22C1055

EA Personnel Registration No: R2095104

• Transport Provided: Yishun, Woodlands, Jurong East and Boon Lay MRT
• Hybrid Arrangement : 2 days WFO, 3 days WFH

Key Responsibilities:

1. Dealer BP Goal Achievement & Improvement of Market Coverage

• Complete in setting up dealer yearly business plan with supervisor
• Provide weekly (or when applicable) report on dealer activities and market condition
• Manage the monthly order and sales to achieve monthly BP
• Tracking of allocated dealer business plan completion (monthly orders, dealer co-op, dealer sales action plan/activities, stock reports)
• Sales support (product information, CSM quotation, secure special production spots, customer visit) to allocated dealer
• Special pricing approval (preparation and obtain approval from supervisors)
• Ensure dealer maximize Sales Campaign
• Maintain dealer organization chart and MLAP records
• Improve dealer representation (coverage, promotion, investment) of brand
• Plan & conduct dealer / customer visits to enhance dealer development and/or discuss operational issues.
• Product refreshment training.
• Propose and carry out actions for further development of market in region in charge.

2. Market Performance Development

• Analyse the market trend and customer needs in the region in charge.
• Constant feedback of competitors’ product and trend to Product Marketing for future product development.
• Analyse competitors’ sales activities, strategies and propose yearly action.

3. Strengthening Distribution Resilience

• Analyse dealers’ business model. Set action plans to improve dealers’ distribution resilience.
• Analyse dealers’ profit contribution and further improves on revenue mix

4. Accounts Receivable

• Accounts receivable collections & follow up

5. Special Projects/Process Enhancement

• Other duties as assigned

Requirements:

• Diploma or Degree in any discipline
• Minimum 2-3 year of relevant experience in similar industry
• Business/finance acumen
• International Travel (30%)

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Our Client is a leader in the Energy Manufacturing industry in Singapore. Due to their current expansion plan, they are looking for a Sr Mechanical Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Conduct scheduled plant inspections as per maintenance regime, ensuring compliance with SOPs, regulations, and safety standards.
• Manage and coordinate the team for planned/ad-hoc Mechanical Maintenance activities.
• Collaborate with internal and external counterparts in the area of work.
• Optimize planned plant/equipment maintenance during overhauls and inspections.
• Supervise maintenance contracts and develop work procedures.
• Analyze mechanical system failures, recommend corrective actions, and troubleshoot issues.
• Implement plant improvement projects to enhance reliability and performance.
• Lead plant improvement processes for availability, efficiency, and cost-effectiveness.
• Prepare technical specifications and manage procurement for maintenance needs.
• Plan and execute works within the budget, tracking expenditures.
• Develop and guide staff on technical matters.
• Any ad-hoc duty as assigned

Requirement

• Min Degree in Mechanical Engineering or equivalent field
• Min 5 years of experience in engineering/maintenance oil and gas or Utility industry
• Proficient in Mechanical engineering maintenance knowledge and standards.
• Experience with safety and statutory requirements

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Engineering Construction Company
• Competitive Benefits
• Candidates who have completed semiconductor projects will be preferred.

Our client is a Engineering and construction company that specializes designing and delivering mega and significant projects. They are looking for an experienced Senior Mechanical Engineer for their expanding business.

RESPONSIBILITIES

• Expertise in M&E systems, testing, commissioning, and familiarity with construction processes, project management, BIM, and Green Mark 2021 requirements.
• Manage engineering teams, coordinate with stakeholders, and oversee M&E aspects of construction projects.
• Strong analytical, problem-solving, and decision-making abilities for technical issue resolution and goal achievement.
• Knowledge of quality control, industry standards, and safety regulations to ensure compliance and maintain a safe work environment.
• Financial skills to assist in budgeting, reporting, and implementing cost-control measures

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Highlights:

• AWS + VB
• Tuas (Pick up at CCK, Jurong West, Bukit Batok, Boon Lay, Clementi)
• 5 days, 8.30am - 5.15pm
• Manufacturing
• Mechanical Drawings (SolidWorks)

Job Description

• Maintain mechanical equipment, systems and processes to meet requirements, applying knowledge of engineering principles
• Provide technical support to optimise process capability of production line, ensuring smooth and efficient output.
• Assist in Product samples making prior to mass production based on customers specification
• Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
• Hands-on applications are expected

Job Requirements

• Higher Nitec or Diploma in Mechanical Engineering
• Must be able to understand Mechanical Drawings
• Able to design with SolidWorks or similar
• A team player

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

► Good career exposure

► Near Jurong Pier

► Manufacturing industry preferable

Our client is one of the largest e-waste recyclers in Singapore with a global marketing and distribution network.

Job Responsibilities:

• Lead and manage technician and ensure daily, periodical and shutdown maintenance works are executed safely, timely and efficiently.
• Attend and resolve operation equipment's breakdown within short time frame.
• Perform troubleshooting, fault diagnosis and failure analysis to determine cause of equipment/machinery failure.
• Review and conduct technical investigation of production equipment's problems, evaluate findings, prepare analysis reports and recommend countermeasures to enhance equipment's reliability.
• Develop, review, and implement Risk Assessment for all mechanical and electrical work activities.
• Support new recycling process/ product introduction and setting up of new facility & SOP.
• Manage fixed assets and stocks movement, follow up on purchase request and delivery of parts.
• Develop, review, and implement production equipment's maintenance procedure to improve equipment maintenance methodology.
• Ensure all documents & reports generated related projects, update and maintain of maintenance and inventory records and reports.
• Provide guidance and training for supervisor and technicians to develop their skills and expertise on the process and equipment.
• Provide technical expertise for operational processes, implementing technical solutions to improve equipment uptime and asset utilization through use of continuous improvement mindset.
• Ad- hoc assignments as assigned from time to time.

Job Requirements:

• Diploma/Degree in Mechanical Engineering/ Electrical Engineering or its equivalent
• Min 3-5 years of mechanical machinery and facilities maintenance experience
• Knowledge of Microsoft Office applications
• Problem solver, analytical and a team player who display pro-activeness and initiatives and take ownership and be accountable
• Able to work independently with minimum supervision
• Possess good oral and written communication skills

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format or please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lee Jun Siong (Johnson)

EA Personnel Reg No: R24120242

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Product area

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

Job description

Our thirst for technology is a part of everything we do. The Data Center Engineering team takes the physical design of our data centers into the future. Our lab mirrors a research and development department -- cutting-edge strategies are born, tested and tested again. Along with a team of great minds, you take on complex topics like how we use power or how to run state-of-the-art, environmentally-friendly facilities. You're a visionary who optimizes for efficiencies and never stops seeking improvements -- even small changes that can make a huge impact. You generate ideas, communicate recommendations to senior-level executives and drive implementation alongside facilities technicians.

With your technical expertise, you ensure compliance with codes and standards, develop infrastructure improvements and serve as an expert in your specialty (e.g., cooling, electrical).

Qualifications

Job responsibilities

• Define data center system-level, product architecture, and Research and Development, while helping to develop operations and maintenance procedures for systems/processes.
• Conduct engineering analysis and research designs and methods of data center equipment and facilities.
• Ensure designs and installations meet requirements (e.g., predicted cooling, structural, operational concerns, etc.).
• Serve as Technical Lead in the region. Collaborate with Operations, Execution, and Construction teams to develop new data center (DC) mechanical infrastructure products and systems.

Minimum qualifications

• Bachelor's degree in Mechanical or Industrial Engineering, related discipline, or equivalent practical experience.
• 10 years of experience in mission critical facility design and construction environments.
• Experience in mission critical facilities and their mechanical infrastructure.

Preferred qualifications

• Master's degree in Engineering, Business or relevant field, or professional engineering license.
• Experience in estimating, mechanical design, operation, and commissioning of mission critical data center mechanical equipment.
• Experience in design, construction, and commissioning of mechanical cooling plants, fire suppression systems, fuel oil systems, domestic water systems, and sanitary sewer systems in mission critical facility design and construction environment.
• Experience designing modular building scale assemblies, with an understanding of mechanical tolerances and tolerance analysis.
• Knowledge of mechanical engineering and design principles with expertise in medium-scale production, structural beams/elements, and international building codes.
• Operational knowledge of construction safety procedures.

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Title: Mechanical Engineering Technician (Motors and Engines)

Responsibilities and Duties:

• Inspect and troubleshoot equipment, machinery, and operating systems, identifying and correcting issues as needed.
• Maintain high standards in mechanical operations, ensuring systems meet operational and safety requirements.
• Diagnose and resolve mechanical issues with motors, pumps, conveyors, hydraulic systems, and other related equipment.
• Provide expert-level technical support and guidance to junior technicians when necessary.
• Perform both independently and as part of a team to ensure timely completion of tasks.
• Adhere strictly to company safety guidelines, procedures, and industry standards.
• Conduct regular preventive maintenance on machinery as per established protocols.

Technical Skills:

• Use a variety of hand tools, power tools, and rigging equipment for daily tasks.
• Perform welding using cutting torches as needed for repairs and maintenance.
• Operate and maintain heavy industrial equipment, including forklifts, scissor lifts, basket trucks, and bobcats.

Compliance and Reporting:

• Ensure compliance with both company and customer regulations, as well as policies.
• Maintain and manage personal tools, including keeping an up-to-date, documented personal tool inventory.
• Accurately manage time records and complete work orders in a timely manner.
• Foster positive relationships with both customers and team members through effective communication and professionalism.

Responsibilities / Job Description

• Inspect, troubleshoot and fix running equipment as necessary;
• Supervision during tunnelling and dismantling
• Responsible for on-site technical and engineering matters
• Control/monitoring work progress
• Ensure compliance to WSHA, safe work procedure and maintain good house-keeping
• Duties assigned by the M&E Superintendent
• Assist the Mechanical/ Electrical and Operations Staff to target minimal downtime of the TBM

Requirements

• Able to work shift work, 6 day work week
• Preferably 5 years or more experience in LTA Tunnelling project
• 10 years of relevant working experience in the construction field
• Possess relevant trade foreman certificate, NCC, BCSS etc

1. JOB DESCRIPTION

Job Title

MECHANICAL DRAUGHTSMAN

Occupation

MECHANICAL DRAUGHTSMAN

Job Description & Requirements

Position Summary

Design and Develop Packaging Products by providing 2D Drawing for customers and operations.

Main Accountabilities

The person is in-charge of

· Designing of products as required by the customers through the informations from the Sales Team.

· Preparation of Drawings and Bill of Materials for the products (Foam, Cartons, XPallet).

· Suggests improvements or modifications to current products for customers’ approval.

· Provides support to Production to ensure a more cost effective and more efficient way of producing the products.

· Integrates any requirements not stated by the customer but necessary for the intended use, where known

· Includes statutory or regulatory requirements to the designs, if applicable.

· Provides the specifications of the materials as specified in the Bill of Materials.

· Conduct Drop Tests and Vibration Tests

· Provides the specifications of the products.

· Work independently and can assist the Manager when the latter is not around.

· External discussions with customers together with Sales Team.

Internal & External Working Relationships

· External Customer

· External Vendors (ie Die Cut Mould Maker)

· Sales team

· Customer service

· Purchasing

· Operations (Production, Quality)

Job Requirements (Qualifications, Skills, Experience, Competencies)

· Engineering Background (preferably Mechanical, Industrial, Packaging or Design) or any related field.

· Experience in designing.

· Proficient in AutoCAD/ Solidwork or other CAD softwares.

· Knowledgeable in doing 3D Drawings.

· Preferably has a background in designing packaging materials.

· Has good Organizational and Planning Skills

· Knowledgeable of the concept of Engineering Statics and Dynamics.

· Knowledgeable on Microsoft Office (Word, Office, Powerpoint) or similar softwares.

· Proficient in doing reports (verbal and written)

· Has interest in personal development through new technologies and innovations.

· Good problem-solving skills

· Positive and Motivated

Responsibilities and Duties

*Carry out preventive maintenance and corrective repair works on packaging and conveying equipment
• Troubleshoot and rectify electrical, mechanical, pneumatic and hydraulic system faults on equipment
• Identify mechanical, electrical, and technical issues through inspections and tests
• Analyze problems, diagnose malfunctions, and find solutions
• Use various tools and equipment for diagnosis and repair
• Maintain accurate records of repairs and parts used
• Communicate findings and repair option
• Test vehicles post-repair to ensure proper functionality
• Order and replace parts, collaborating with suppliers
• Attend to breakdown repair and recovery of operational equipment
• Reduce equipment downtime and enhance equipment performance through quality maintenance works
• Proper recording of works carried out on equipment. Equipment includes vehicles, chassis, forklift, industrial facilities, etc (list is non exhaustive)
• Any others adhoc job assigned by supervisor
• Maintain high standard of housekeeping at workplace
• Ensure strict adherence to all workplace Health & Safety policies, legal and company regulations, with proper documentation and storage.
• Practice safe work procedures and safety rules implemented at the workplace.
• Not to engage in any unsafe or negligent act that may endanger self or others.