Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Role:

Project Sales Engineer (Mechanical / Engineering Design)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

[Order Number: 707232-R]

Responsibilities

• Act as the main point of contact between customers and internal teams, ensuring effective communication and timely resolution of technical and maintenance issues.
• Provide hands-on troubleshooting and maintenance for power plant systems, including root cause analysis and resolution of operational and mechanical issues.
• Plan and oversee scheduled and unscheduled maintenance activities, coordinating with customers, technical advisors, and vendors to ensure efficient execution.
• Monitor and report key performance metrics, including reliability, availability, and maintainability (RAM), and present findings and recommendations to customers.
• Identify and mitigate operational risks, support system improvements, and collaborate with remote monitoring hubs and technical support teams to enhance system reliability.

Requirements

• More than 3 years of experience as a Mechanical Maintenance Engineer in the petrochemical or chemical industry.
• Previous site work experience in Long-Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or rotating equipment in industrial plants is preferred.
• Strong troubleshooting skills, with expertise in mechanical systems and components, instrumentation, controls, and plant operational aspects.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Job Descriptions:

• Identify and source suppliers for both direct and indirect materials/services to expand the supplier base and meet new project and production requirements.
• Obtain quotes from newly identified suppliers to determine costs and explore opportunities for cost reduction.
• Lead negotiations with suppliers on a regular basis to ensure competitive pricing for materials and services.
• Participate in supplier qualification audits to ensure compliance with company standards and requirements.
• Evaluate and approve suppliers for inclusion in the approved vendor list.
• Conduct regular performance reviews of suppliers to monitor quality and assess capabilities.
• Maintain and update standard operating procedures for the procurement department to ensure consistent workflow processes.
• Develop and negotiate favorable supply agreements with suppliers to optimize procurement processes.
• Collaborate with other departments and suppliers to establish efficient supply chain models with minimal inventory holdings.
• Work with engineering and warehouse departments to ensure adherence to quality standards for supplied items.
• Provide the sales department with periodic quotation templates for standard products and generate quotations based on customer requirements.
• Complete any additional tasks or projects assigned by management.

Job Requirements:

• Possess a degree in Mechanical Engineering or a Diploma in Mechanical Engineering with 2-3 years of relevant experience.
• Diploma holders should have at least 2 years of experience in sourcing components and fabrication parts.
• Proficiency in Microsoft Word and Excel is essential.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Job Responsibilities:

• To perform mechanical fitting job, machine assembly and maintenance, which requires knowledge of machine fits and tolerances
• To lead a team of technicians in preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of machinery and equipment having assigned and allocated resources to meet targets through planned and scheduled annual maintenance activities
• To carry out metal working for hot works
• To execute welding work
• To operate heavy machinery and perform lifting works
• To read mechanical drawing

Job Requirements:

• Candidate must possess at least secondary school education/ NITEC
• Past experiences in heavy industry/ metal fabrication shops/ machine maintenance will be preferred
• Candidate should possess basic knowledge of computer and data entry, and basic command of English (ability to read, write and speak)
• Able to work rotation shift and weekends

Job Description:

• Possess the skills to inspect, diagnose, repair, and maintain trucks
• 检查及维修卡车
• General troubleshooting of vehicle according to complain
• 跟据顾客要求检查及解决汽车故障
• Ability to pinpoint parts to be purchased and understand the part list
• 清楚的指出须要更换的零件
• Maintain proper service records on job done and read job orders
• 记录汽车维修及读工作单
• Perform diagnostics and repairs on trucks (mechanical, electrical, and electronic & aircon system replacement).
• 对卡车进行诊断和维修（机械、电气和电子,空调维修）。
• Overhaul power steering, engines, ESCOT gearboxes, rear axles, and emission systems.
• 检修动力转向系统、发动机、ESCOT 变速箱、后轴和排放系统。

Job Qualification (Skills & Requirements):

• Minimum 3 years’ experience 至少3年经验
• Able to understand basic English基本英文
• Able to multitask, prioritize and manage repair job efficiently
• 能够高效地执行多任务、确定优先级并管理维修工作
• Detail-oriented with a strong commitment to providing high-quality work
• 注重细节，坚定致力于提供高质量的工作
• Ability to work both independently and as part of a team 能够独立工作和团队合作
• Physical capability to lift up to 20kg and perform tasks associated with automotive repair
• 具备举起 20 公斤重物并执行与汽车维修相关的任务的身体能力
• At least a Professional Certificate/Nitec in Automotive Technology or a former NTC 2/3 in Motor Vehicle Mechanics.
• 至少拥有汽车技术专业证书/Nitec 或机动车机械师前 NTC 2/3

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

We are looking for a Mechanical Engineerto assist in site supervision and coordination of ACMV systems for a construction project. Key duties include overseeing project execution, managing progress, coordinating with stakeholders, and ensuring quality control.

Responsibilities:

• Assist in ACMV system installation and commissioning.
• Coordinate project planning, materials, and manpower.
• Supervise subcontractors and monitor work progress.
• Conduct site inspections and ensure compliance with standards.
• Prepare reports and documentation as required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 1-5 years of relevant experience in construction projects (ACMV systems preferred).
• Good communication skills and project management knowledge.
• Experience in wafer fabs or pharmaceuticals is a plus.

Hold a valid, trade appropriate certificate or suitable experience or working knowledge of either Mechanical, Hydraulic, Electrical and Marine systems.

• Be diligent and only use the correct parts and tools when conducting maintenance.

• Maintain a neat and clean working area and workshop.

• Meet all the relevant requirements of IMCA D 001 and hold an up to date Logbook.

• Valid First Aid Certificate.

• Valid in-date Basic Offshore Safety Course, at a recognised training centre.

• Ability to meet deadlines and to prioritise and multi-task.

• Ability to work within a Team and be a trustworthy team member.

• Initiative-taking attitude with high attention to detail.

• Be fluent in spoken and written English.

• Demonstrated good safety record and knowledge of Workplace Health & Safety.

• Successfully complete the Shelf Subsea IMCA-based Competency Assurance and Assessment Program. • Ability to represent the Company in a professional manner.

• Ability to stop the work when witnessing an unsafe act or condition.

Requirements

• Proven experience as Supervisor or similar role
• Organizational and leadership abilities
• Communication and interpersonal skills
• Self-motivated with a results-driven approach
• Problem-solving skills
• Able to work longer hours with prolonged period of standing.
• Must work on weekends/PH.

Responsibilities

• Assessing Vehicle Damage: Evaluating the extent of damage to a vehicle’s body panels, frames, and structures.
• Repairing or Replacing Panels: Fixing dents, scratches, and structural damage by repairing or replacing damaged panels (doors, roofs, bumpers, etc.).
• Welding and Shaping: Using tools to weld, cut, and reshape metal to restore the vehicle's original shape.
• Sanding and Smoothing: Preparing surfaces by sanding and smoothing them for painting.
• Fitting and Aligning Parts: Ensuring that repaired panels and parts are properly aligned and fitted.
• Painting: Sometimes applying primer and working with spray painters to repaint the repaired areas.
• Set daily/weekly/monthly objectives and communicate them to employees
• Organize workflow by assigning responsibilities and preparing schedules
• Oversee and coach employees
• Identify issues in efficiency and suggest improvements
• Enforce strict safety guidelines and company standards

Job description:

• Dealing with Excavator, Prime Mover, Reach stacker, & forklift problems and repair
• Troubleshooting electrical & mechanical components & inspecting vehicle engine
• Replacing & repairing malfunction parts & potential leaking
• Understanding vehicle diagnostic systems & functions
• Repair experience in excavator, forklift & prime mover, etc

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Responsibilities / Job Description

• Inspect, troubleshoot and fix running equipment as necessary;
• Supervision during tunnelling and dismantling
• Responsible for on-site technical and engineering matters
• Control/monitoring work progress
• Ensure compliance to WSHA, safe work procedure and maintain good house-keeping
• Duties assigned by the M&E Superintendent
• Assist the Mechanical/ Electrical and Operations Staff to target minimal downtime of the TBM

Requirements

• Able to work shift work, 6 day work week
• Preferably 5 years or more experience in LTA Tunnelling project
• 10 years of relevant working experience in the construction field
• Possess relevant trade foreman certificate, NCC, BCSS etc

Assistant Project Engineer

• Basic: S$ 2,400 - 2,800
• Working Hours: 5 Days Mon-Fri (830am to 530pm)
• Location: Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Mechanical system assembly, electrical wiring, I/O test and site installation.

· Provide basic operation training to customer

· Assist in machine repair, service, maintenance & troubleshooting.

· Update progress of given tasks to department head.

· Ensure given tasks complete within given timeline.

· Liase with suppliers, contractors and customers on site installation job.

Requirement

· Minimum Nitec in engineering or equivalent

· Willing to learn and responsible

· Team player who is able to work independently when required.

Basic knowledge in mechanical, electrical system is preferred

Job Responsibilities

• To support the construction team for M&E engineering works.
• Planning/scheduling and coordination of M&E works.
• Project coordination, supervision, and monitoring of the progress of site work.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Ensure quality work in order to achieve CONQUAS and/or QM requirements
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree in Mechanical & Electrical Engineering or related fields. PE Board recognized degree is preferred.
• Minimum 8 years of relevant experience in the construction industry for senior role.
• Proficient in Autodesk Revit or BIM software.

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

• Ensure machines are prepared, set up, and qualified before crating for shipment from the factory to customers.
• Provide occasional on-site service within Singapore and internationally as needed.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

1 Able to read and produce mechanical drawings, electrical drawings and electronics schematic diagrams/ wiring diagrams；

2 Coordinate, schedule and supervise work assignments together with workshop supervisor;

3 Good team player, work closely with the project team to ensure specifications are met;

4 Liaising with sub-contractors and suppliers and inter department personnel;

5 Submission of final costing to Finance Department;

6 Perform other ad-hoc duties as assigned by superiors

Job Scope:

• Design and develop mechanical and electrical systems for buildings and infrastructure
• Conduct feasibility studies and cost estimates for M&E projects
• Collaborate with architects, engineers, and contractors to ensure project alignment
• Prepare technical specifications and project documentation
• Supervise installation, testing, and commissioning of M&E systems
• Ensure compliance with relevant codes, standards, and regulations
• Perform site inspections and quality assurance checks
• Troubleshoot and resolve technical issues during the project lifecycle
• Monitor project progress and manage budgets effectively

Requirements:

• Possess Diploma/Degree/ in Electrical/Mechanical or equivalent professional qualification
• Proficient in BIM software and AUTOCAD will be an added advantage
• Good interpersonal and communication skills
• Capable of leading CSD/SEM coordination, design interface, coordination for construction of transit project, chair and lead coordination meeting.
• Minimum 5 years’ experience and at least 1 LTA MRT underground projects after tertiary education in related fields for construction supervision of similar scale and complexity.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.