Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

• Installation and Maintenance of Electrical and Mechanical Systems: Install, maintain, and repair electrical and mechanical systems, including motors, generators, HVAC systems, and other complex equipment across construction projects.
• System Integration: Collaborate with engineers and other technicians to integrate electrical and mechanical systems, ensuring compatibility and proper functioning across all areas of the project.
• Troubleshooting and Fault Diagnosis: Identify and troubleshoot issues in both electrical and mechanical systems, using specialized tools to analyze and repair problems related to wiring, circuit boards, and mechanical components.
• Blueprint and Technical Drawing Interpretation: Read and interpret electrical and mechanical blueprints, technical drawings, and schematics to ensure proper system installation and repairs.
• Safety Standards Compliance: Ensure all work is performed in compliance with safety regulations, electrical codes, and mechanical standards to prevent accidents and ensure a safe working environment.
• Performance Testing and Calibration: Conduct performance testing and calibration of electrical and mechanical systems to ensure they meet the required specifications and function efficiently.
• Collaboration with Project Teams: Work closely with engineers, architects, and other construction teams to ensure the proper design, installation, and integration of electrical and mechanical systems.
• Night Shift and After-Hours Support: Be available for night shifts or after-hours work to perform emergency repairs, conduct routine system checks, or ensure that critical systems are operational when needed.
• Preventative Maintenance: Perform regular maintenance on mechanical and electrical systems to prevent breakdowns and extend the life of equipment, following scheduled maintenance programs.
• Documentation and Reporting: Maintain detailed records of all maintenance, repairs, and installations carried out. Report any issues or progress to the management team, ensuring accurate documentation for future reference.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North

Job Description:

• Design, test, troubleshoot, and commission company products, including jigs, fixtures, and both semi-automatic and fully automatic custom machines.
• Participate in customer meetings to discuss project requirements and proposals for new initiatives.
• Conduct research and develop innovative ideas to improve the company’s performance and competitiveness in industrial automation.
• Assist in or manage the procurement of required materials and equipment to support the execution of these tasks.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

• To support the construction team for M&E engineering works.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Conduct inspections for all M&E systems.
• Ensure all M&E and related works carried out by contractor are planned and executed to the requirements of the project.
• Liaise with consultants, clients and subcontractors on M&E works progress, coordination and decisions.
• To involve, support and assist other aspects of operational needs when assigned.

Job Requirements:

• Degree in Mechanical & Electrical Engineering.
• Min 5 years M&E building service experience.
• Knowledge of AutoCAD added advantage.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

We are seeking a skilled and motivated Mechanical Engineer to join our dynamic team. In this role, you will play a pivotal part in supporting the mechanical engineering aspects of our technical operations, from designing mechanical parts to collaborating with vendors and ensuring product quality.

This position offers an exciting opportunity to work in a hands-on environment, contributing to the development and enhancement of our products while ensuring seamless cross-departmental integration.

If you are passionate about mechanical design, adept in CAD software, and thrive in a collaborative and international setting, we invite you to bring your expertise to our innovative organization.

Responsibilities Breakdown:

1. Technical Support: Offer expertise on mechanical engineering aspects across all technical operations.
2. Design and Drafting: Create precise mechanical designs and technical specifications for parts or products, leveraging CAD tools.
3. Vendor Management: Source and coordinate with vendors for fabricating mechanical components, ensuring adherence to designs and conducting quality checks upon receipt.
4. Cross-Functional Collaboration: Support production, repair, and customer service teams to address technical queries, resolve issues, and handle product returns.
5. Compliance and Quality: Follow and fulfill the roles detailed in the company’s QEHS (Quality, Environment, Health, and Safety) framework.

Requirements Analysis:

1. Educational Background: A degree in Mechanical or Mechatronics Engineering ensures a solid foundation in design, systems, and manufacturing.
2. Hands-on Experience: At least 4 years in manufacturing or workshop settings provides practical expertise, essential for effective problem-solving and process improvement.
3. Assembly Skills: Proficiency in mechanical assembly reflects the role’s practical application aspects.
4. Software Proficiency: Familiarity with tools like SolidWorks, Creo Parametric, and AutoCAD Inventor indicates the need for expertise in 3D modeling and drafting.
5. Soft Skills: Teamwork, responsibility, and effective communication in a diverse environment highlight the importance of collaboration and adaptability.

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 8 years’ experience

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Scope:

• Provide technical support and troubleshooting for mechanical products
• Assist in product integration and customer site applications
• Collaborate with sales teams to deliver tailored solutionsX`
• Liaise with R&D to provide customer feedback and insights
• Prepare technical documentation and user training materials
• Conduct product demonstrations and training for clients
• Ensure optimal product performance and customer satisfaction
• Participate in product testing and validation
• Stay updated on industry trends and new technologies

Requirements:

• ITE or Diploma in Mechanical Engineering (or equivalent)
• Strong hands-on skills with small mechanical parts
• Familiarity with AutoCAD 2000, R14, and SolidWorks is advantageous

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

JOB RESPONSIBILITIES

• Perform basic drafting

• Prepare design drawings / calculations / schematic diagrams / reports for;

o Mechanical ventilation system

o Fire protection system

• Perform prescriptive / performance-based submissions to Fire Safety Department (FSD)

• Attend meetings with clients, consultants, inspectors and authorities

• Perform basic report writing (optional)

• Perform CFD simulations (optional)

• Perform occupants evacuation simulations (optional)

REQUIREMENTS

• Basic numerical and communication skills (written and verbal)

• Able to work in teams

• Attention to detail and iterations

• Candidate is expected to be autonomous under supervision and guidance

• Basic familiarity with Fire Code 2018, local code of practices and standards

• Familiarity with software (Mandatory)

o CAD

o Microsoft Word

o Microsoft Excel

o Microsoft Powerpoint

• Familiarity with software (Optional as training will be provided)

o Corenet

o Pyrosim

o Fire Dynamic Simulator

o Pathfinder

ACADEMIC QUALIFICATIONS

• Minimum B.Eng. (Mechanical) from a recognised institution.

Our culture believes in Powering Your Potential . We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems.

We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about.

We are looking for a talented Lead Technician - Mechanical to join our team based in Tuas, Singapore. This is an Onsite role reporting to the Service operation Manager. This role will also require travelling within Singapore. Reporting to the Service Supervisor, this role provides support for all Cummins products, primarily in Automotive, Industrial and Marine applications, in a combination of workshop and field work. You will respond to engine breakdowns and provide technical analysis of failure, warranty support and troubleshooting engineering issues. Previous experience in a similar Service role, and knowledge of High-Speed Diesel engines, is essential.

This position offers a long-term career with a global organisation in the power industry and could be the next step in your successful Service career.

In this role, you will make an impact in the following ways:

Responsibilities:

• Establishes and continually develops productive customer relations and ensures prompt and efficient attention to customer needs.
• Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete complex repairs at customer site.
• Performs preventative maintenance activities as per documented schedules and standards on engines and related components in the field.
• Escalates unresolved issues to product specialists or supervisor.
• Coaches and develops technicians and/or apprentices and transfers knowledge and experience to others; may provide work direction; may review repair plans, parts lists, etc.
• Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.
• Identifies additional sales and service opportunities with customer. Completes training in line with skill and business requirements.
• Maintains service vehicle and tools for cleanliness and proper operation.
• Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor.

RESPONSIBILITIES

To be successful in this role you will need the following:

• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Customer focus - Building strong customer relationships and delivering customer-centric solutions.
• Develops talent - Developing people to meet both their career goals and the organization’s goals.
• Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.
• Manages conflict - Handling conflict situations effectively, with a minimum of noise.
• Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
• Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
• Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
• Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
• Engine Systems Interactions - Interprets and analyzes the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.
• Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
• Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
• Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
• Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

QUALIFICATIONS

Education, Licenses, Certifications:

• Trained Engine Technician (Preferred)
• Vocational diploma from relevant technical institution
• Locally valid driving permit, Class 3 and above This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

• Significant field service work experience
• Expert level knowledge of and/or experience with engine products
• Customer service experience
• Experience providing technical advice and coaching to more junior technicians (preferred)
• Able to write and speak in English language
• Preferably with experience in internal combustion engines
• Experience in Marine environment will be advantageous
• No cross-border relocation provided.
• Team leading experience, 3+ years required.

Job scope

• Develop mechanical design concepts and create 3D/2D CAD models
• Perform design validation through simulations and testing
• Select materials and optimize designs for cost and manufacturability
• Collaborate with cross-functional teams for integrated solutions
• Ensure compliance with industry standards and quality control
• Support manufacturing during design-to-production transition
• Maintain design documentation and implement continuous improvements
• Communicate with clients to refine requirements and provide technical support

Requirements

• Diploma/Degree in Electrical Engineering with 2-3 years of relevant experience
• Experience in designing and developing customized automation machines
• Proficient in writing PLC application programs (Omron, Allen Bradley, Siemens, etc.)
• Familiar with PC-based programming (Visual Basic, C++, etc.) for machine controls
• Hands-on experience with schematics and electrical layouts, and able to guide technicians
• Occasional travel required

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Cooling Equipment, Chiller
• High Variable bonus + Mobile Allowance + Other Allowance
• Work-Life Balance
• Yearly appraisals salary adjustment（Based on performance)
• Singlife Medical Insurance Benefits

Responsibilities:

• Work closely with customers and engineers to assess equipment needs, and to determine system requirements.
• Prepare project document submissions, and support other team members in execution.
• Performing quality control tasks on equipment, budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Coordinating, cooperating and communicating with team members and other project participants and collaborating to create more efficient project methods and to maintain the project's profitability.
• Ensuring the project's compliance with the applicable codes, safety practices, policies, performance standards, and specifications.

Requirements:

• Diploma / Degree in Mechanical Engineering or related field
• Prefer candidate with min 2 years experience in dealing with ACMV, Equipment Installation and etc
• Prefer candidate with Class 3 driving license.

*Only shortlisted candidates would be notified**

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Work under tight timeline
• Must be team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Job duties:

• Dealing with explosion protection system 3D design for diesel or electrically powered mobile vehicles.
• Drafting 3D design drawings for diesel engine equipment such as generator sets, compressors, pumps, & other marine/oil & gas/offshores related share parts
• Conducting calculation for required bolt & nuts consumables, steel support brackets, & welding & fabrication
• Performing reverse engineering from finished equipment
• Getting bill of materials & parts numbers & manuals, components selection, engineering specifications and checklists
• Giving cost reduction & standardization processes
• Making improvements for design work process
• Diploma or degree in mechanical engineering or related
• 0 to 2 years mechanical drafter experience
• Experience in Machinery 3D design & AutoCAD & Solidworks

5 days’ work week

Multinational Corporation (MNC)

Basic + AWS + Performance Bonus

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, please click to apply.

joey.teo(a)bayesrecruitment.com

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318

bayesrecruitment.com

EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Responsibilities:

• Assist Engineer in coordinating and supervising maintenance and overhauling jobs
• Prepare Job Acceptance on completion of Jobs
• Monitor and update job status daily.
• Supervise mechanical / diesel / air-conditioning works
• Liaise with customers and contractors on works to be carried out
• Arrange for inspection / job acceptance
• Carry out general repair and maintenance jobs onboard vessels or in workshops
• Dismantle and troubleshoot for mechanical defects
• Perform testing of equipment to ensure smooth operation
• Perform test run and report to superior on the job completion status

Requirements:

• NTC in Mechanical/Marine/Automotive related field.
• Physically fit with good eyesight
• Possess basic understanding of basic components and functions of mechanical engines or diesel engines
• Able to use IMTE tools such as micrometer, bore gauge and torque wrench
• Able to read simple drawings and service reports
• Possess man management experience for up to 5 technicians
• Willing to work under outdoor environment on site
• Basic working knowledge in MS Word and Excel for status and reporting purpose
• Willing to work in Changi area, with company transport provided

Other Information:

• Location: Changi
• Transport provided at: Jurong West & East, Jalan Bahar, Choa Chu Kang MRT, Bukit Panjang, Woodlands MRT, Bukit Merah, Sengkang, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Description:

We are seeking a highly motivated Mechanical & Electrical Coordinator to join our team, specializing in fire alarm and sprinkler systems. In this role, you will be responsible for coordinating all aspects of fire protection systems within mechanical and electrical projects.

Key responsibilities include:

Manage project documentation and ensure accurate records for fire alarm and sprinkler systems.

Create detailed AutoCAD drawings from scratch to completion, specific to fire protection systems.

Prepare cost estimates and manage budgets, ensuring project financials are aligned with company goals.

Conduct site inspections to monitor fire protection systems' installation, ensuring adherence to safety and compliance standards.

Coordinate both commercial and residential fire alarm and sprinkler projects, delivering high-quality service.

Assist with LEW (Licensed Electrical Worker) testing and ensure compliance with all regulatory requirements.

Understand client needs and clearly communicate project scope, especially in the context of fire protection systems.

Collaborate closely with project managers and engineers to guarantee seamless integration of fire protection systems within broader mechanical and electrical projects.

Ensure compliance with the Singapore BCA Code of Practice for Electrical and Mechanical systems.

Requirements:

Diploma/Degree in Mechanical or Electrical Engineering or a related field.

Proficiency in AutoCAD with a focus on fire alarm and sprinkler system designs.

Strong understanding of fire protection systems, along with general mechanical and electrical systems.

Experience in project costing and budget management, specifically for fire alarm and sprinkler systems.

Excellent communication skills to liaise with clients and project teams.

Ability to manage multiple projects and maintain strong organizational control.

Willingness to visit job sites regularly for inspections and coordination.

Class 3 driving license is an added advantage.

We will take 4 to 5 working days to evaluate the candidates. Only shortlisted candidates will be notified. If you do not receive a call or email within this time frame, we encourage you to explore other opportunities.
License No: R1102109 | Arasu

Role:

• Lead on all Mechanical or Electrical related matters (team & projects)
• Preferably able to perform role as to manage clientele and business development
• Any other areas where candidate can contribute
• Lead a team

Requirements:

• Preferably Professional Engineer (Electrical); LEW(Grade 9) or Professional Engineer (Mechanical)
• More than 8 years of working experiences, preferably in M&E Consultancy firm.

Job Title: Maintenance & Electrical

Are you someone with a knack for fixing things and a willingness to learn?

Join our team at a globally recognized Japanese hamburger chain, where quality and innovation have been our hallmarks since 1972. We're expanding rapidly and are looking for a passionate Mechanical & Electrical Executive to keep our outlets running smoothly while contributing to exciting new projects.

Your Role: What You’ll Be Doing

• Work Orders ManagementHandle requests via email and physical documentation.
  Coordinate repair works by liaising with vendors and applying for work permits.
  
• Minor Repair & MaintenanceReplace cabinet door hinges, electrical plugs, and light bulbs (low height).
  Conduct general maintenance tasks to ensure everything operates seamlessly.
  
• Routine ServicingClean fan motor areas in chillers/freezers (3 times per store/year).
  Ensure cables and plugs are clean and safe.
  
• Project AssistanceSupport exciting new projects and initiatives.
  
• Inventory ControlManage operating supplies, inventory, and distribution.
  

Why Join Us?

• Competitive Starting Salary: $3,150 per month.
• Career Growth: Learn, develop, and grow with a company committed to employee success.
• Perks & Benefits: Medical benefits, annual leave, and a supportive work culture.

What We’re Looking For

• Basic knowledge of maintenance and repair is a plus, but enthusiasm and a willingness to learn matter most.
• Open to working on weekends and public holidays as needed.

Why We’re Different

Our premium Japanese burger chain isn't just about great food; it's about building great careers. From fresh ingredients to innovative concepts, we believe in quality not just for our customers but also for our team. Be part of an organization that values you, supports your development, and empowers you to make an impact every day.

Ready to Take the Next Step?
Apply now to be a Mechanical & Electrical Executive and grow with us in an exciting, global environment!

EA Personnel R22110043 Tan Eng Kang

EA License 21C0430 A Dreamworks Company Pte Ltd

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure the timely completion of given tender assignment

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Able to work a under tight timeline
• Must be team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Job scope:

• Dealing with all related stakeholders for the M&E projects
• Understanding market price trends
• Capable of administrate on ACMV/Electrical tender and tendering procedures
• Controlling, planning for strategy of all tendering duties
• List the scope of work and commercial requirements in order to determine the risks of the projects
• Preparing and follow up on the Request For Quotations to suppliers/sub-cons in order to ensure tender costing and technical data to be submitted on time
• Taking off Bill of Quantities from the ACMV Drawings, Points of Schedules and
• Architectural drawings
• Collating price comparison, costing summary and technical proposal in order to prepare tender submission
• Studying the addendum and/or corrigendum documents and update costing summary with technical proposal accordingly

Diploma/Degree in any engineering related field

Quantity surveyor experience from M&E construction field

Salary up to $4000

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Technician
• Working Location: Ang Mo Kio
• Working Hours: 5 Days/ 6 Days per week, 9am – 6pm
• Salary Package: Basic Salary + OT + AWS
• Duration: Permanent

Key Responsibilities

• Install, maintain and repair electrical machines.
• Identify and diagnose issues with machinery to perform timely repairs.
• Perform routine maintenance and inspections to ensure optimal performance.
• Assist with the development of existing or new machines.
• Helps in the sourcing of machine parts and liaise with vendors when required.
• Other ad hoc duties as assigned.

APPLY NOW!!!

• Proven experience in the electrical and machinery fields.
• With good understanding of electrical systems.
• Technical drawing knowledge is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781