Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Roles & Responsibilities

Job Responsibilities:

• Develop and implement maintenance schedules for machinery and equipment.
• Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
• Conduct routine inspections and preventive maintenance to optimize machinery performance and extend equipment lifespan.
• Liaise internally between operations teams to address machinery breakdowns and operational concerns.
• Coordinate data collection on auxiliary materials from operations teams and report accordingly.
• Manage receipt, maintenance, and monitoring of machinery parts inventory.
• Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.
• Undertake additional tasks as required to support operational needs and project requirements.

Job Requirements:

• Bachelor's Degree in Mechanical or Mechatronics Engineering or Equivalent.
• Preferably with at least 7 years of working experience dealing with machinery.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

Mechanical Engineer

Our client is a MNC chemical manufacturer company. They are currently seeking for Mechanical Engineer to improve the production technology of the site.

The role of the Mechanical Engineer includes:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance [preventive, corrective, & breakdown maintenance], transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance.
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

Job Requirement:

• Degree in Bachelor of Mechanical Engineering.
• Familiar with Static and Rotating equipment.
• Minimum 3 years of experience in Chemical Process Plant.

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to improper submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Minimum Qualifications/ Experience/Skills

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• Proven ability to communicate well in written and verbal communications
• Design thinking for product inventions and enhancements
• Motivation and commitment to providing interpersonal customer service
• Knowing and applying current industry standards and information
• Soft skills including a positive attitude, flexibility and conflict resolution
• The ability to solve problems creatively on time
• Having up-to-date knowledge and technical skills

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical / Environmental Sustainability to join our Building Services team in Singapore.

You will be joining our Centre of Excellence (CenEx) team, led by one of our Technical Director who was recently conferred the SGBC-BCA Professional Leadership in Sustainability Award.

Senior Engineer – Mechanical (ESD)

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Leading mechanical services design and environmental sustainability design for building projects.
• Assume responsibility and undertake engineering tasks of increasing scope and complexity.
• Carry out site condition assessment, feasibility studies, energy audits and technical due diligence.
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing.
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants.
• In charge of jobs control, planning, monitoring, progress and job cost reporting.
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job.
• Assist in assessment and review of designs prepared by others on behalf of the clients.
• Liaise with authorities on plans submission and compliance.

Pre-Requisites

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore.
• Minimum 5-7 years relevant working experience in the design & supervision of building service projects and Fire Protection.
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage.
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures.
• Understanding of energy efficient mechanical systems and equipment with Green Building design experience and knowledge of Green Mark/ LEED is an added advantage.
• Competent user of relevant engineering software and simulation tools.
• Excellent written & spoken communication skills in English.
• Able to work independently & exercise initiative.
• Excellent delegation and communication skills, which sees you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS & Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

● Education background

● Work experiences

● Reason(s)for leaving

● Current and Expected salary

● Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Conduct feasibility studies, develop design specifications, and support design proposals.
• Create conceptual and detailed designs for automation equipment, including material handling and process automation.
• Produce detailed CAD drawings using Autodesk Inventor or similar software, and release comprehensive design documentation.
• Work with the manufacturing team on Design for Manufacturing (DFM), assembly processes and qualification procedures.
• Assemble, test and qualify prototypes, troubleshooting as necessary to ensure project timelines and budgets are met.

Requirements

• Experienced in designing industrial automation using Autodesk Inventor, with expertise in pneumatics, motion components, DFM, DFA, and GD&T.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• Support projects from the Mechanical Engineering/Design perspective of Buildings (Industrial/High-Tech, Data-Centre) from initial scoping through detailed design, commissioning, and final handover, including preparing technical specifications, reports, and cost estimates.
• Collaborate with respective departments to develop client proposals and tenders, aiming to achieve profitable business outcomes. This involves bid planning, facilitation, cost estimation, writing, technical input, and necessary approvals.
• Serve as a technical authority, providing mentorship and guidance to other electrical engineers in the team while ensuring technical excellence in all aspects of project execution.
• Foster strong client relationships by contributing to client plans and maintaining a positive rapport while supporting the development and motivation of team members and junior engineers.

Requirements

• Bachelor's Degree in Mechanical with a minimal of 3-10 years of prior functional experience with Engineering Consultants, Design Practices or Professional Services
• Buildings (Industrial/High-Tech, Data-Centre)
• Good knowledge of working drawings and construction practices
• Conversant with local codes & regulations
• Competency in authority requirements and submission procedures

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367

Responsibilities:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Requirements:

• Bachelor degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Experience / Skills:

• Degree in Mechnical Engineering (or equivalent qualification) or have a proven track record in the delivery of design projects.
• Minimum 10 years of working experience, preferably in consulting environment, with minimum 3 years of working experience in detailed design, design with contractor and onsite experience.
• Relevant experience in mechanical/electrical building services engineering design, including areas such as specification writing, calculations.
• Have knowledge and understanding of engineering practices, techniques and procedures and interfaces with design team and client needs.
• Make reference to regulations, industry standards and good practice in engineering design.
• A track record of having worked on a variety of Building Services designs covering for example, Infrastructure, Education, Healthcare and Commercial projects.
• Experience of seeing conceptual designs through to completion and dealing directly with clients.
• Able to contribute to the fee proposal and determine resources.
• Able to assess staff requirements at each work stage, agreeing these with the Project Manager and be able to manage single disciplinary and multi-disciplinary projects.
• Worked in infrastructure projects, e.g. railway projects will be an added advantage
• Experience in BIM (Revit) will be an added advantage.
• A member of a professional Institution or close to achieving professional engineer status.

Role Responsibilities:

• Attend/Chair progress, design team and coordination meetings.
• Represent AECOM at client, design team and progress meetings throughout the course of the design and construction stages of the project.
• Prepare outline scheme report/technical content of the design information
• Input to pre-qualification and selection of contractors, respond to tender queries, comment and review tender returns.
• Attend tender/client interviews.
• Ensure the project work complies with the Project Management Plan and Programme.
• Ensure quality, sound and efficient engineering design service being reflected in every project deliverable.
• Conduct design check/review with junior engineers on every project handled.
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Obtain the necessary information both internally and externally from Architects, Quantity Surveyors and Design Consultants for the design to proceed.
• Liaise with clients, professional organizations, Authorities, contractors, suppliers, sub contractors and other project stakeholders.
• Identify and meet effectively the requirements and expectations of clients.
• To working junior engineers, provide necessary guidance, training and provide assistance on their technical / professional development at AECOM.

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Descriptions

• Plan, execute and supervise all M&E related work services.
• Manage M&E works and services for effective and efficient M&E facilities performance.
• Coordinate and supervise the M&E installation and building maintenance work.
• Working closely with the client, sub-contractors, and the project team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
• Involve in the preparation of the method statement, work progress, drawings and other relevant documents related to M&E works.
• Assist in planning, controlling and coordinating of mechanical, electrical and building works.
• Schedule, monitor and supervise the progress of works .
• Prepare and follow- up closely on the client inquiries and quotations.
• Follow the company internal work processes and documentation.
• Involve in conducting toolbox meeting and coordination meeting.
• Coordinate, liaise and communicate with people of all levels
• Build and maintain good client relationships and uphold high quality standards.

Requirements

• Minimum Diploma / Degree in Engineering or Facilities Management related qualifications.
• M&E Facilities operations background with at least 3 years of experience will be an added advantage. Advantage to have Fire Safety Protection Certification.
• Candidates looking for Electrical Engineer position or currently working as M&E / Electrical Engineer (For Facilities Maintenance / Management industry) are welcome to apply.

Tan Choon Hau

Senior Talent Acquisition Consultant

EA Licence No:18C9251

EA Reg ID: R1988835

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Degree/Diploma in Mechanical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

Job Description:

Create 3D solid model of components and/or assembly based on sketches or physical parts;

Provide mechanical engineering drafting support to project teams;

Modify and update mechanical engineering drawings.

Job Requirements:

Higher NITEC in Mechanical Engineering Drawing & Design or its equivalent;

Min 2 years' experiences in related field;

Proficient in modeling and creating fabrication drawings;

Proficient in drafting standards, ISO, ANSI Y 14.5;

Knowledge in Solid Edge modeling & drafting software will be an added advantage;

Knowledge in MS office application;

Able to work independently with minimum supervision.

NOTE: Open to Singaporeans only.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Working Location: Jurong Island
• Working Hours: Weekdays, 8am to 430pm
• Transport from Jurong East MRT
• Basic Salary: $4500 - $5500

Objective:
To ensure the safe, efficient, and reliable operation of mechanical systems by overseeing maintenance activities, improving maintenance management systems, and optimizing equipment performance to support operational goals.

Job Scope:

• Oversee and supervise in-house and external contractors for mechanical maintenance activities.
• Manage daily, transition, turnaround, and upgrading maintenance projects.
• Ensure compliance with HSEQ standards, statutory requirements, and industry best practices.
• Establish and improve maintenance management systems to ensure equipment reliability.
• Maintain accurate maintenance records for analysis and troubleshooting.
• Conduct root cause analysis and implement corrective/preventive actions.
• Optimize and manage spare parts inventory for critical and non-critical equipment.

Requirements:

• Bachelor’s Degree in Mechanical Engineering.
• Minimum 3 years of experience in a chemical process plant.
• Familiarity with static and rotating equipment.
• Strong analytical and problem-solving skills.
• Ability to work well under pressure and collaborate across functions.

We regret that only shortlisted candidates will be notified.

Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu

Registration Number: R24124814

EA License Number: 02C4944

People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705

http://www.peopleprofilers.com

• Ensure that the construction works are done according to drawings and within specified requirements.
• Check thoroughly drawings and instructions received and also highlight their discrepancies and work changes to the Project Manager.
• Prepares and submits method statements and alternative proposals as and when required.
• Liaise closely with the client’s representative and other work changes.
• Prepares site records of variation work and other work changes
• Liaise with sub-contractors/suppliers of different trades pertaining to sub-contract activities to be executed on-site
• Report any problems, discrepancies or changes that affect the quality of the works.
• Assist to enforce the Quality Management System on-site, including safety management.
• Assist to ensure that all construction activities comply with the Authority.
• Collate information from Supervisor/Foremen of the different trades to compile and prepare the Site Daily Report including the progress report.
• Assist the Quality Surveyor in preparing the monthly progress claims, VO claims and verifies suppliers and sub-contractors claims.
• Candidates with sound knowledge of Plumbing & Sanitary.
• More than 6 years experience in Singapore

Summary:

• Location : North
• 5 day, office hours
• MNC with good career progressions
• AWS + VB

Responsibilities:

• Support the design, development, configuration, and implementation of mechanical and electronic systems to enhance efficiency, improve yield, and strengthen EO capabilities, from concept to pilot stage.
• Recommend, procure, implement, and optimize mechanical and electronic components as needed.
• Provide timely assistance to OPs teams during process runs, transitioning from the pilot phase to production, and ensure solution documentation is created and maintained accurately.
• Involve in meetings with customers to understand their requirements for new projects.
• Research and develop innovative ideas and concepts to improve the company’s performance and competitiveness in industrial automation.
• Procure or assist in procuring necessary items to facilitate the execution of these duties.

Requirements:

• Diploma or Bachelor Degree in Mechanical Engineering
• Experience in setting up PLCs, single-board computers, or robotic/automated systems, especially in an industrial setting, is an advantage.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996