Min Qualifications / Experience :

Bachelor Degree in Mechanical Engineering with minimum 3 years relevant experience

Job Skills Required :

Mechanical design of pressure vessels, heat exchagers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.

Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.

Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

Duties & Responsibilities

The duties and responsibilities are:

a) Responsible for the formulation of schedules and datelines for design and date of submission.

b) Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost efficient methods of design are used.

c) Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.

d) Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.

e) Control and issue all technical documents.

f) Any adhoc project assigned by Design Manager.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping, tank and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have bachelor or master’s degree in mechanical engineering or equivalent.
2. Must have more than 10 years’ work experience.
3. Must have valid API 510, API 570 and API 653 Certificate.
4. Must have Senior Welding inspector certificate under AWS-SCWI or CSWIP 3.2.2.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in Shell Seraya and Neste Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, tanks and columns.

1. Promote and practice 5 "S" and the QEHS system procedures.

2. Take corrective steps on non-conformities which are reported and to solve the problems which impact the quality and delivery of service and products.

3. To counsel subordinates who violate company rules and regulations.

4. Lead team of men for site works as required.

5. On time delivery.

6. Promote & drive continual improvement programs.

7. Mentor new fitters and give guidance to update others on technological changes in our portfolio

To be successful in this role, we expect you to have:

• Supervisory Capacity with Minimum 5 years of Experience in Anchorage Engine works

• Knowledge & Experience of job cards

• Hands-On knowledge and experience in assembly/disassembly of engines

• To oversee packing standards to ensure compliance

• To conduct tool-box meeting with subordinates to disseminate information and instructions

• A diploma in marine engineering with shipyard experience

• Fruitful and Meaningful relationship with our customers

• A good attitude with willingness to learn

Job Description & Requirements

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Reporting to Project Head, you will be responsible for managing the full project execution in terms of scope, cost, schedule and quality. With strong project planning, cost control and time management skills, you will be overseeing a team of sub-contractors and working with various internal and external parties.

Job Description:

• Manage the full spectrum of project execution in terms of project scope, cost, schedule and quality from initial preparation stage until complete handover.
• Planning, cost control, work measurement and collection of performance data such as installed quantities, spent labour and other progress measurement data.
• Manages and tracks all changes, potential changes, ensuring estimated cost and schedule changes are given visibility to relevant parties.
• Provide regular reports inclusive of cost and schedule data to the top management.
• Works independently on complex project risk assessment issues, manage conflict, and provide resolution using a combination of technical skills, leadership, teamwork and people management skills.

Job Requirements:

• Minimum diploma holder in Engineering, Project Management, and other relevant majors.
• Experience to handle large and complex project in automation, logistics equipment and system, etc.
• Minimum 3 years of experience in Project Controls management relating to cost, scheduling and estimating at a project level.
• Knowledge of contracts and contract administration including its assessment and implementation at each phase of the project.
• Demonstrated ability to work with project teams to influence and achieve desired results.
• Proficiency in MS Office (spreadsheets, word processing, presentations, graphics) and Project Controls software.
• MUST be willing to travel for overseas project (Travel frequency 50%- 70%)

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Resolve the problem arises on site to ensure timely completion of works

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance. Update daily activities and manpower allocation.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Involve in technical discussion and progress meeting

9. Assist project manager in daily works.

Qualifications

• Bachelor’s degree in Mechanical / Sewer Engineering approved by PE board.
• Min 4 years' Experience
• Experience in water pipe and best knowledge in laying water pipe
• Strong verbal, written, and organizational skills.

Other Details

Salary Range S$3,500 to S$7,000

performance bonus & variable bonus

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. To carry out RBI inspections as per the codes and standards.
7. Perform QA/QC welding inspections at site.
8. Carry out coating inspections of equipment’s and piping.
9. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
10. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have bachelor or masters degree in mechanical engineering or equivalent.
2. Must have more than 10 years’ work experience.
3. Must have valid API 510, API 570, API 571 and API 580 Certificate.
4. Must have Senior Welding inspector certificate under AWS-SCWI or CSWIP 3.2.2.
5. Must have NACE level 3 or FROSIO level 3 certificate.
6. Must have NDT level II certificates in MPI, PT, UT and RT.
7. Must have previous shutdown inspection experience in Shell Seraya and Neste Singapore.
8. Knowledge in code book like AWS, ASME, API codes.
9. Must have good knowledge in coating inspections.
10. Must have a good knowledge about MT, PT, UT, RT Methods.
11. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

The Solutions Engineer is responsible for the installation, technical support and maintenance of software applications that help customers manage their manufacturing processes and improve production efficiency. He/She should have a deep understanding of the application's functionality and backend. He/She is responsible for interacting with the application users and setting up, and onboarding of the users. He/She collaborates with the sales team to promote products and services to meet customers needs and requirements. He/She is also familiar with the relevant software platforms on which the solutions are deployed and uses critical thinking skills to identify and solve problems. The job requires being on standby with on-call availability and travelling to overseas customer sites.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Responsibilities

· Carry out Electrical, Instrumentation, Control and Automation (EICA) design for water and wastewater treatment projects.

· Manage the procurement, costing and delivery of electrical software and hardware required

· Make automation programming according to clients’ technical specifications

· Arrange control panel assembly, testing, and installation at construction site

· Modification and Integration of new equipment / system with existing automation system

· Update of SCADA/HMI graphic to reflect new instruments/equipment and mapping these graphics to the corresponding field signals

· Attend to EICA breakdowns with diagnosis and solutions

· Attend meetings with subcontractors and clients for technical clarifications and arrangements.

· Coordinate with Project Managers to ensure deliverables are within the schedule.

· Keep records of EICA design, drawings, and document systematically

· Provide support and assistance to Sales Department and Maintenance Team

· Guide and educate junior EICA personnel.

· Other ad-hoc assignments.

Requirements

· Bachelor's Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

· Minimum 3 years working experience at membrane base water treatment plant, preferably

· Proficient with Schneider / Siemens / Allen-bradley software

· Well-versed with SCADA and HMI

· Excellent communication skill

· Good personality and team spirit

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours：

Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform corrosion monitoring inspection and coordination with NDT team
3. Submit daily and weekly reports to client on the inspection findings.
4. Perform QA/QC welding inspections at site.
5. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc
6. Provide Lead auditor services for various clients at various manufacturing companies.
7. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have Diploma or bachelor degree in engineering
2. Must have valid API 510, API 570 and API 653 Certificate.
3. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1
4. Must have NDT level II certificates in MPI, PT, UT and RT
5. Must have IRCA QMS lead auditor certification.
6. Must be a Saudi Aramco and Singapore welding society approved welding inspector
7. Must have more than 5 years’ work experience in Shell Bukom.
8. Knowledge in code book like AWS, ASME, API codes
9. Must have a good knowledge about MT,PT,UT,RT Methods.
10. Must having an inspection experience in Exchanger,pressure vessels, Pumps, compressors, valves, well head equipment’s, Tanks and Piping.

Job Description & Requirements

Job Responsibilities :

• Preparation of document for presentations.
• Attending site visit for tendering project and project management.
• Involve in solving construction issues raised by construction teams
• Other duties assigned from time to time.

Job Requirements :

• Degree in Civil / Structural Engineering recognized by BCA and preferably recognizes by Professional Engineering Board, Singapore.
• At least 5 years of relevant experience preferred
• Familiar with AutoCAD, Microsoft word, Excel and Project
• Familiar with latest code of practice as per BCA requirement

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.
• Maintain systems and component capabilities through rigorous testing, track cutting-edge trends, search for ways to improve functionality and efficiency, and implement appropriate segments to keep production methods current
• Prepare comprehensive documentation for all electrical designs, including wiring diagrams and schematics, bills of materials, assembly drawings, design changes, test reports, design-validation plans, and reports ensuring that installations and operations conform to standards and customer requirements

Analyze customer and project requirements, and provide technical guidance and recommendations to project teams and stakeholders

● Develop and implement testing and validation protocols to ensure that electrical systems and equipment meet or exceed industry standards and regulations

● Collaborate with other engineers, project managers, and stakeholders to ensure that projects are completed on time, within budget, and to the highest quality standards

● Stay up-to-date with industry trends, technologies, and best practices in electrical engineering, and recommend new tools and techniques as needed

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

Collaborate with cross-functional teams to develop and support business applications, adhering to company and industry best practices.

Actively participates in analysis, design, coding and testing phase.

Perform maintenance and troubleshooting of issue in existing solutions.

Participates in R&D effort on new and exciting technologies.

Requirements:

Diploma or Degree in Computer Science

Minimum 1 year of hands-on experience in Web Applications development.

Skilled in C#, ASP.Net, .Net Core, MS SQL, Angular, Jquery, Flutter.

Experience in mobile app development (Flutter) is an added advantage.

Attention to details, committed and responsible with strong working ethic, able to work on tight deadlines.

Self-motivated individual with the ability to learn and develop independently in a fast paced environment.

Strong analytical and problem-solving skills and good team player with good communication skills.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent
• At least 6 years of working experience in the related field is required
• Having experiences in LTA Project would be bonus and advantageous
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• Willing to work in site office

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Attends and records the daily quality assurance related inspections for mechanical and HVAC installations
• Coordinates with other production departments, clients, and surveyors for Inspection & testing requirements
• Assigns the systems to be tested to the various supervisors and technicians involved in the operation
• Ensures that the Quality work processes to enhance efficiency and productivity
• Reports on non-conformance and issue Improvement notes, where necessary
• Ensures timely completion of project
• Ensures that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Any other assigned duties and responsibilities

Requirements:

• Degree in Marine and Offshore / Mechanical Engineering
• Minimum 5-10 years’ experience with 3 years in marine construction and installations
• Must have ASME PCC-1
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.
• Hands on in setting up of test lab to enable development and testing.
• Perform PLC software and algorithm development for electrical propulsion solutions.
• Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.
• Participate and support commissioning of vessels with similar configurations.
• Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.
• Any other tasks as may be required by supervisor.

Requirements:

• Min engineering degree in relevant discipline
• Strong software development skills particularly in equipment controls
• Strong analytical and troubleshooting skills
• Hands on person
• Team player
• Good communicator and has no problem engaging with external parties
• Knowledge in power electronics, motor drives, marine propulsion systems is a plus
• Fresh graduates are welcomed