Key Responsibilities:

• Design and implement network architectures for LAN/WAN/Wireless
• Configure and deploy routing protocols (OSPF, EIGRP, BGP).
• Implement switching protocols (STP, MSTP, VLANs).
• Design and implement network security measures (firewalls, ACLs, VPNs).
• Support, Configure, Maintain and Upgrade corporate customer’s network devices
• Ensure network security and connectivity
• Monitor network performance (availability, utilization, throughput and latency)
• Incident/Problem/Change/Service Request/Configuration Management.
• Create and maintain technical documentation (network diagrams, configurations).
• Assist in network design and implementation.

Experience:

• 8 - 10 years of experience in supporting, configuration, maintenance, and upgrading corporate customer’s network devices.
• CCNP certified (Routing and Switching).
• Good understanding and hands-on experience of networking protocols like routing and switching and Wireless (Physical experience in data centres for all Network devices/equipment).
• Experience in Firewall configuration and network security policy implementation. Hands-on experience on FortiGate/Cisco/Palo Alto/Aruba/ Huawei is desirable.
• Experience in debugging and fixing technical problems in network by coordinating with vendors, data centre and onsite support teams whenever required.
• Have experience in creating network documents and flow diagrams.
• Hands-on remote access and site to site VPN.
• Experience in monitoring tools like solar wind, NMS, Wireshark, MRTG Cacti etc.
• Knowledge of Windows, Linux and Load Balancer will be added advantage.

• 5+ years of experience with IT networking and IT systems in Data Center and virtualization technologies (UCS, VMware ESXi, vSphere, vSAN, vCenter, Windows Server, Linux Server).
• Hands-on experience in troubleshooting, and maintaining Aruba Wireless Conductor and Wireless Controller and Access Points, Identity Service Engine, Palo Alto firewalls, and network monitoring and management tools
• Experience with AVLP (Audio-Video, Lightings and Projections) equipment maintenance
• Proficient in managing common network services (SNMP,Syslog, DNS, NTP, DHCP, AD, etc).
• Analyze network performance with tools like Wireshark and provide root cause analysis, recommendations, guidance, and expertise in maintaining the highest level of performance.
• Proven ability to perform complex troubleshooting, backup, archiving, and recovery
• Strong documentation skills

· Responsible for project management, On-Premise Network Management, Cloud Deployment, implementation, testing, support, maintenance of Cloud Hosting Environment and support of the Application developed by the company

· Provide support, act as liaison/ consultant for Deployment of SaaS solution on the Cloud Environment.

· Provide support for SaaS solutions on the Cloud Environment offered by the Company.

· Responsible for testing out different tools used for Code Scanning, Vulnerability assessment and penetration testing on our environment.

· Support team members in the continuous effort to enhance and upgrade existing Hosting environment to support changes in the technology and business environment.

· Provide good service and timely response to the needs of external customers and within the office

We are seeking a motivated and detail-oriented Network Engineer (L1) to join our team. This entry-level role is part of our Managed Services team, where you will provide first-line support to ensure the smooth operation of clients’ IT infrastructure and systems. The role involves proactively identifying, investigating, and resolving technical issues, managing incidents to resolution, and ensuring no service level agreement (SLA) conditions are missed.

As an L1 Engineer, you will focus on standard and low-complexity incidents and service requests across multiple technology domains, including (but not limited to) Cloud, Security, Networking, Applications, and Collaboration. You may also support project work as req

Key Responsibilities:

- Monitor and maintain IT infrastructure to ensure optimal performance.
- Provide first-line support for incidents and service requests in alignment with SLAs.
- Investigate, troubleshoot, and resolve low-complexity technical issues.
- Escalate complex incidents to higher-level support teams when necessary.
- Contribute to project work as needed to support team objectives.

Preferred Qualifications:
- CCNA Certification or equivalent Level 1 Network Security certification.
- ITIL V3 Foundation Certification.
- CompTIA Network+, CompTIA Security+, or equivalent certification.

If you are passionate about IT, eager to learn, and ready to contribute to a dynamic team, we encourage you to apply!

Salary: $4,500 - $7,000

We are looking for a skilled Network Engineer to join our engineering team. You’ll be responsible for designing, implementing, and managing network systems and data center infrastructure.

What You’ll Do:

• Design and implement network systems, ensuring they meet client requirements.
• Install and terminate network equipment (copper, fiber, switches, routers, firewalls, etc.).
• Test, configure, and manage servers (VMware), SAN storage, and network infrastructure.
• Conduct factory acceptance tests (FAT) and provide reports.
• Deliver training and presentations to customers.

What You’ll Need:

• Bachelor's degree in Computer Science, Networking, or a related field.
• 5+ years of relevant experience.
• Strong documentation, organizational, and troubleshooting skills.
• Certifications:Cisco (CCNP preferred).
• NetApp/EMC (NCDA preferred).
• VMware (VCIX6-DCV preferred).

For interested applicants, kindly click “apply”

EA Personnel Name: Melody Sim
EA Personnel No: R2095899
EA License No: 16C8443

• Network engineers shall support System Administrators in day to days operations, such as Data Center & network system health checks, network configuration & firmware upgrades, patch record management and serve as Point of Contact for visitor to IT Room.
• Monitor DC temperature and energy consumption of all facility infrastructure components such as power distribution units and computer room air conditioners unit using Data Centre Infrastructure Management tools in place.
• Monitor network devices health status using a network health monitoring tool in place.
• Assist SA in performing scheduled system health check on standalone networks.
• Report any anomaly in readings based allocated baseline or system hardware failure to SA.
• Contacting maintenance team and be the point of contact on site.
• Log finding in the infrastructure health check register.
• Work with tech support team to perform port security lifting on network devices.
• Configure network devices based on given template.
• Verify and ensure network patch details are updated and labeled accurately as indicated.
• New network faceplate and patch cables laid must be updated.

Requirements:

• Degree or diploma in computer science or IT.
• Minimum 1 year exp in Network engineering in Data center environment.
• comfortable for non Camera Phone environment.

Lead and manage our cybersecurity product portfolio for APAC region. This role will be responsible for understanding our solutions, delivering compelling client presentations, and building strong relationships with both clients and partners. The ideal candidate will have a strong technical background in cybersecurity solutions, coupled with a passion for client engagement and market analysis. You will work closely with sales, marketing, and product teams to position our company as a thought leader in the cybersecurity industry.

Key Responsibilities

• Maintain deep technical knowledge of our cybersecurity product portfolio, including understanding of product features, benefits, and competitive advantages.
• Provide input on product development and enhancements based on customer feedback and market demands.
• Deliver engaging product demonstrations, showcasing the technical and business benefits of our cybersecurity solutions to potential clients.
• Tailor presentations to address specific client needs, challenges, and pain points in the cybersecurity landscape.
• Monitor industry trends, competitor activities, and emerging cybersecurity threats.
• Provide insights to the marketing team for product positioning, public relations, and content marketing strategies.
• Actively represent the company at industry events, forums, and thought leadership activities.
• Develop and maintain relationships with strategic technology partners, channel partners, and distributors.
• Work closely with alliance teams to develop joint go-to-market strategies and co-selling opportunities.
• Equip the sales team with product knowledge, tools, and training to effectively sell cybersecurity products.
• Collaborate with sales leadership to provide ongoing support and training for the sales team.
• To understand customer requirements, assist in the qualification processes and by utilising the company’s standard product and services portfolio to create a suitable solution in concept.
• Actively participate in the RFI/RFP process and development of the technical aspects of proposals in line with customer needs, liaising and qualifying with other colleagues as necessary. Present technical solutions to customers both formally and informally as required.
• To author the Technical Sections of Proposals for prospective customers and the solution design documents for handover to low level design.
• To participate with sales in winning customer commitment by carrying out specific tasks called for by the sales campaign plan. Generally, this will include presenting the company's technical competence and the customer specific technical solution.
• To validate appropriate order documentation initiated by sales prior to submission to the order desk or in the case of projects, to brief Project Management and Engineering to ensure they are equipped to deliver the solution.
• To provide additional information and advice to Service Delivery and to Operations and answer referrals, during implementation phase of a sold service.
• Where applicable ensuring that customer solutions remain fit for purpose throughout their life cycle by conducting regular customer reviews and initiating appropriate change. To keep the customer aware of emerging technologies, products and services.
• Where applicable work closely with the sales team in the ‘Account Planning/Development’ process and support their understanding of how products and services can be applied in the customer environment.
• Provide product knowledge transfer to other members of the sales organisation to enhance their ability to use products to create customer solutions.

Technical Skills & Experience

• A demonstrated knowledge or awareness of a variety of technologies and cybersecurity topics viz.; SASE, ZTNA, EDR,MDR, UEBA, Threat Analytics etc.;
• Strong domain knowledge in VPNs, SD-WAN, MPLS, Cloud Native Security functions such as Secure Web Gateways, Cloud Access Security Brokers, Firewalls, Cloud Sandbox, DLP and Zero-trust Network access.
• Technical solutions offered by various OEMs in the market around SDWAN, ZT and SASE. • Network design, SD-WAN, MPLS from edge to cloud, edge to Hub & Spoke & Mesh Architectures.
• Securely automated cloud connectivity as customers transition to SASE.
• Provide Consultation, Design, Architect, Delivery Phase wise Zero Trust Transformation for Customers from present state to future state.
• Deep product and solution knowledge Product positioning, differentiation across solutions, operational characteristics, integration of multiple cross domain platforms
• Lead demo and Proof of Concept (PoC).
• Train internal and external customer on latest trends in SASE, Network Security, Zero Trust trends and Framework
• Integration of various Security technologies with SIEM architecture.
• Sound knowledge in few areas of the cyber security domains viz.; Network Security, Cloud Security, Advanced Threat management, End point and content security in the order of preference.
• Sound understanding of multi-cloud security scenarios and cloud posture management solutions like CASB, CSPM,CWPP
• Knowledge and understanding of various Global standards like GDPR, NIST frameworks, HIPAA,MCTS T3, ISO 27001,ISO 27701, ISO 27018 etc.
• Knowledge of Privacy and associated frameworks and business needs.
• Understanding of technology and services irrespective of the OEMs.
• Stays abreast of current cyber security trends and threats to ensure that solutions provided to clients are applicable.
• Knowledge of various licensing schemes proposed by OEMs and hyper scalers.

Certifications

• Highly desirable to have one or two of professional certifications like SDWAN, SASE, Zero Trust, CEH etc.
• Cloud security certifications viz AZ 500, AWS certified Security specialist etc.; is most desirable.
• Various OEM certifications from leading vendors like ZScaler, Palo Alto, Fortinet, Cisco etc.

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

Roles & Responsibilities

• Ensure performance complies with specications, technical clarications, and drawings.
• To guide and supervise on works arrangement and site activity.
• To check all installation drawings and prepare relevant schedule.
• Monitor the daily progress of activities and prepare daily report of the status of each assignment.
• Managing project budgets. Able to work on weekend/public holiday.
• Able to work regularly under rooftop.
• Able to use Microsoft suite of Software including project.
• Prociency in AutoCAD is preferred.
• Good organizational skills and communication skills. Good technical competency.
• Carry out the electrical cabling works, tray & trunking works with installation.
• Experience in integration of the sites.
• Minimum Certicate requirement in Safety Supervisor.
• Candidates with a Diploma in Electrical and Electronics Engineering or above Minimum 3 years working experience on related sites

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

Job Description:

• Drive the overall Company’s Quality Assurance and Quality Control functions and programmes
• Support the Project Management and QAQC teams in the development and implementation of Project Quality Plans (PQP)/CONQUAS/Quality Mark/Quality Management plans
• Ensure strict compliance with various Contractual QAQC Requirements conforming to Project requirements
• Oversee the renewal audits & surveillance certification audits of existing ISO 9001 certifications to the latest versions
• Act as main liaison party with external certifying body on all ISO certifications related to Quality
• Oversee the continuous operations of the In house Academy with HR department to upskill and train all employees internally through in-house courses/training
• Conduct site-based Quality-related training to promote quality culture, better knowledge and awareness among project site staff

Requirement:

• Possess a recognized Engineering Degree with certification and equivalent
• Preferably BCA CONQUAS / QM manager certification , Internal ISO 9001 Auditor certification is a plus point
• Min 5 years experience as QA/QC role
• Expereienced in BCA CONQUAS / Quality Mark Assessments is a plus point
• Positive working attitude and can starts within short notice period

About the Role

We are seeking a full-stack engineer to join our fast-growing fintech startup. You will work closely with the leadership team to define the product and technology direction, with ample opportunities for growth and flexibility.

You Will...

• Own ideas from inception to execution.
• Work directly with the founders to define the product and engineering roadmap.
• Design and implement backend functionality, architecture, and more. You will work independently, be self-directed, and deliver innovative solutions.
• Pave the way for the company to scale to millions of transactions and power unique digital commerce flows.

Skills We Would Love to See

• Design, develop, and maintain web backend applications using TypeScript, Kotlin, AWS Lambda, microservices frameworks, and PostgreSQL.
• Implement automated continuous integration and deployment (CI/CD) pipelines using tools such as GitHub CI, CircleCI, and AWS CDK for infrastructure as code (IaC).
• Design and implement automated testing using frameworks such as Jest and Playwright.
• Develop and maintain APIs using frameworks like Express and Fastify with OpenAPI specifications for external systems, such as online e-commerce platforms or alternate payment methods.
• Develop and maintain integrations with external systems, including payment network providers, financial institutions, payment gateways, and POS terminals.
• Write clean, maintainable, and efficient code that adheres to best practices and coding standards.
• Participate in code reviews and contribute to improving coding standards and processes.
• Collaborate with cross-functional teams to identify and solve complex technical problems.
• Stay up-to-date with emerging technologies and industry trends, proposing new technologies and tools to improve our products and services.

Nice to Have

• Experience with cloud computing platforms such as Amazon Web Services (AWS) or Microsoft Azure.
• Experience with containerization technologies such as Docker and Kubernetes.
• Experience with microservices and serverless architecture using tools like Docker, Kubernetes, AWS Lambda, and AWS API Gateway.

Minimum Requirements

• Bachelor’s or Master’s degree in Computer Science or a related field.
• 0-5 years of experience in developing software applications.
• A good understanding of software design principles and architectural patterns.
• Effective written and oral communication skills, along with excellent interpersonal skills.

Why Should You Join Us?
Open Fabric is a fintech platform that simplifies digital payments and removes friction in the payment process. We operate primarily in Southeast Asia, working with credit and payment providers to help them expand merchant acceptance. Our goal is to create a seamless and efficient commerce network that offers consumers maximum choice and convenience.

Our team comprises industry veterans with years of experience in the fintech space. We are also backed by leading venture capitalists, enabling us to pursue ambitious goals and push the boundaries of what’s possible in online payments.

We are currently looking for talented individuals to join our team and help us achieve our mission. We offer a dynamic and fast-paced work environment where you'll have the opportunity to work with driven and passionate individuals. If you're excited about the problem we're solving and eager to make an impact, we'd love to hear from you.

How to Apply
Come join us! Email your resume to [email protected].

Job Description

• Work closely with external IT vendor, coordinating and supervising all IT related services and work done by external vendors.
• Maintaining and troubleshooting computer systems and network, including cybersecurity.
• Installing and configuring new hardware and application software.
• Conduct applications training for internal stakeholders.
• Tracking and managing IT related problems and issues.
• Address any issues related to ICT security, performance, and applications availability.

Qualifications

• 2+ year work experience with a Diploma/Degree in Computer Science, Information System or equivalent.
• Experience in Microsoft 365 platform. Experience in Microsoft Power Platform is an added advantage.
• Excellent verbal, written, and interpersonal communication skills.
• Excellent analytical problem-solving and critical thinking skills.
• Service oriented and positive working attitude
• Team player, proactive and willing to learn new technologies

Job Responsibilities

• Project coordination and Supervision of ACMV site progress
• Attend site meetings
• Coordination with sub-contractors
• Reporting Project Progress
• any other duties assigned

Job Requirements

• Fresh Graduate Welcome
• Degree in Engineering / Materials
• Working days per week: 6
• Working hours : 0830 - 1730hrs

Responsibilities:

• Provide first-line support for technical issues via phone, email, or in-person.
• Diagnose and resolve hardware, software, and networking problems.
• Install, configure, and maintain operating systems, applications, and hardware.
• Monitor and maintain IT infrastructure, ensuring optimal performance and security.
• Assist in the setup and deployment of new hardware and software.
• Create and maintain documentation for processes, procedures, and troubleshooting steps.
• Collaborate with other IT team members to improve processes and resolve complex issues.
• Provide training and support to end-users on new technologies and tools.
• Any ad-hoc matter assigned by superior.

Requirements:

• Diploma in Information Technology, Computer Science, or a relate field and above.
• At least 2 years of proven experience in IT support or a similar role.
• Experience in system engineering, IT support, or a related role are advantageous.
• Basic knowledge of operating systems (Windows 10, 11 & Server) and office productivity software.
• Basic networking fundamentals.
• Experience with remote support tools and ticketing systems.
• Understanding of security principles and practices.
• Proficient in MS Office such as PowerPoint, Excel, Words etc

Responsibilities:

• Install, test, commission, and conduct preventive and corrective maintenance (PM & CM) on healthcare equipment/systems.

• Address and resolve recurring issues promptly to ensure consistent customer satisfaction.

• Plan and schedule PM or CM tasks efficiently.

• Provide post-sales support as needed.

• Coordinate with manufacturers, vendors, contractors, and clients for project management.

• Assist the project team in executing projects smoothly.

• Respond promptly to service calls.

• Collaborate with team members to gather feedback and identify prospects.

• Undertake any additional tasks as assigned.

Requirements:

• NITEC/Diploma in Electrical/Electronic/Biomedical Engineering or equivalent.

• Proficient in using software-assisted technical service diagnostic and testing equipment.

• Minimum of 2-3 years' relevant experience preferred; fresh graduates with a keen learning attitude are encouraged to apply.

• Strong interpersonal skills and customer service orientation.

• Good command of English and familiarity with Microsoft Office and IT tools.

• Self-motivated, diligent, and reliable.

• Possession of a valid driving license is advantageous.

• Able to work independently as well as part of a team.

• Fluent in both spoken and written English.

The Project Engineer will be responsible for planning, designing, and overseeing the installation of medical devices at various OR, ICU, CSSD and other healthcare project sites. This role requires technical expertise, project management skills, and the ability to collaborate with various stakeholders to ensure successful project execution.

Key Responsibilities:

• Responsible for overall planning and implementation to ensure timely delivery and meet the customer's requirements.
• Coordinate with site supervisors and project managers to ensure project alignment.
• Attend project meetings with the customer, main contractor and other parties.
• Prepare the monthly project documents: project progress report, project claims, minutes of meeting…
• Assist the project manager to collate the necessary project documents: scope of works, project timeline, method of statement, risk assessment, T&C checklists, OMM and material for submission.
• Work with company design engineer to prepare the project drawings for submission (equipment setting out, utility requirement, equipment elevation views…).
• Coordination of the company internal resources (project, service, logistics…) and external parties (sub contractors, main contract) to ensure smooth project implementation.
• Conduct side surveys, technical assessments and feasibility studies.
• Monitor project progress and adjust plans as necessary.
• Ensure compliance with safety regulations, quality standards and company installation requirements.
• Provide technical support and troubleshooting during installation.

Requirements:

• Bachelor’s degree in Engineering, Construction Management, or related field.
• WSQ Workplace Safety and Health Management in Construction Industry - WSHMCI (Formerly known as WSQ SCWWSH, MOM BCSS)
• Experience in project engineering, preferably in the medical device industry.
• Excellent communication and teamwork abilities.
• Strong analytical and problem-solving skills.
• Proficiency in project management software and tools.

About the Role:
Are you passionate about ensuring the delivery of high-quality, impactful solutions? As a QA Engineer, you’ll play a critical role in transforming personalized healthcare by ensuring our cutting-edge AI and telehealth solutions meet the highest standards. Working closely with our Head of Engineering and a dynamic team, you’ll design and execute rigorous testing processes to support the development of game-changing healthcare technology for Asia.

This isn’t just about testing—it’s about building the future of healthcare. From ensuring the scalability of AI-driven relationship management to verifying personalized health insights and tailored treatments, you’ll help redefine what’s possible in telehealth.

Why Join Us?
This is more than just a job—it’s a mission. While there may be trade-offs in compensation, we offer the chance to be part of something transformative. You’ll take ownership of QA processes for impactful projects, working with a passionate team dedicated to using technology and innovation to change lives.

What You’ll Do:

• Review quality specifications and technical design documents to provide timely and meaningful feedback.
• Develop and maintain detailed, comprehensive, and well-structured test plans and test cases.
• Estimate, prioritize, plan, and coordinate quality testing activities across our engineering projects.
• Design and execute manual and automated test cases to validate AI and telehealth solutions.
• Identify, document, and track software defects to resolution, ensuring timely fixes.
• Collaborate with developers and the Head of Engineering to ensure seamless integration of QA processes into the development lifecycle.
• Continuously improve QA processes, tools, and techniques to support scalable, high-quality solutions.

Who You Are:

• You are passionate about delivering high-quality solutions that make a meaningful difference.
• You have experience in developing and executing manual and automated test cases.
• You’re skilled in reviewing technical design documents and creating test plans and cases.
• You’re familiar with QA tools, methodologies, and frameworks.
• You thrive in fast-paced, high-growth environments and enjoy building solutions from scratch.
• You have strong analytical and problem-solving skills and are detail-oriented.
• Experience in healthcare data or applications is a plus but not mandatory.

What We Offer:

• The chance to work on meaningful projects that transform healthcare in Asia.
• A collaborative and innovative team culture where your contributions matter.
• Ownership over impactful QA projects with the freedom to shape testing strategies.
• Flexibility to work remotely with occasional travel across Asia to collaborate with the team.
• An opportunity to join a mission-driven team passionate about making a real difference in healthcare.

Why Join Us?

• Impact: Play a pivotal role in ensuring the quality of transformative healthcare solutions.
• Ownership: Full responsibility over QA processes and the freedom to shape testing methodologies.
• Flexibility: Work remotely, with opportunities for travel across Asia.
• Mission-Driven: Join a team passionate about changing lives through technology and innovation.

Join us, and let’s redefine healthcare together.

- To monitor and supervise work progression according to shop drawings, method statements, material and samples.

- To liaise and work with relevant authorities on shop drawings, materials and samples.

- Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines.

- Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions.

- Manage and execute project as per the schedule.

- To attend meeting with contractors to address issues and update progress.

- Study and reviewing of drawings, specifications for compliance.

- Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.

- Plan and lead testing and commissioning of the fire protection systems.

- Liaise with regulatory bodies, fire departments, and other stakeholders to ensure compliance with relevant codes and regulations.

- Follow up with site / authority inspections, defects rectifications of the fire protection works.

- Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.

- Follow up with maintenance of fire protection systems during DLP.

- Ensure that all project documentation is accurate, complete, and up-to-date.

Job Requirements

-To assist the Project Manager on overall site works related to Fire Protection and this shall be in line with safety requirements.

- Hands-on and technical assistance for fire protection systems services, programming, testing and commission for the projects.

- Design and engineering of fire protection system.

- Supervision of work, liaise with sub-contractors, site supervisors, foremen and workers regarding the overall fire protection system.

- Attending to all site meetings with owner, consultants on all matters relating to the project operation and co-ordination

Requirements:

- Min 3 years similar capacity experience in fire protection Industry

- Knowledge of AutoCAD added Advantage

C2D Solutions Pte Ltd is Hiring!!!

Only Singaporean and SPR need to apply!

Web: www.c2d.com.sg

Tel: +65 6392 2949

Job Description: Mechanical & Electrical Engineer

Company Overview

• C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimisation.
• We were established in 2012 and operates as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions.
• We have a team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers to ensure first-rate engineering solutions for our clients.
• We have grown over the years and are continuously increasing our market presence and are seeking like-minded individuals to join our team as a Mechanical & Electrical Engineer.

Job Responsibilities:

• Design and commissioning of building mechanical & electrical systems including, fire protection, air-conditioning & mechanical ventilation, smoke control systems, power distribution systems, lighting systems, etc.
• Perform Computational Fluid Dynamics simulations to design & optimize ventilation, pollution control and fire & smoke control systems.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements.
• Participate in Testing & Commissioning phase of completed mechanical & electrical installations.
• Appointed engineers will be attached to Senior Engineers who will provide Internal Training and Supervision.

Why you should apply:

1. We are a progressive company that place equal emphasis on personal and professional growth.
2. Appointed engineers with interest and potential will beoffered sponsorship to continue professional upgrading tofurther their engineering career development.
3. Career development includes the opportunity to register as aProfessional Engineer (PE) and/or Fire Safety Engineer (FSE).
4. Opportunities to work on dynamic and impactful buildingprojects
5. Our projects’ portfolio includes pharmaceutical & semi-conductor manufacturing facilities, air & land infra-structurefacilities, hospitality & conventions facilities, etc.

C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimization. We were establishedin 2012 and operate as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions. Our team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers ensure first-rate engineering solutions for our clients. Since 2012 we have grown exponentially and are continuously increasing our market presence and are seeking like-minded individuals with mechanical engineering or building services degrees to join our team as a Mechanical & Electrical Engineer.

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

- Manage and supervise the construction work activities.

- Monitor work progress and project schedule and timeline.

- Design of electrical systems for nursing home projects.

- Conducting technical feasibility study, life cycle study and planning for all electrical systems.

- Preparation of design report, calculation, drawings, specification, cost estimation, method statement and details/ schedules for projects.

- Assist Project Manager in up-keeping the project ISO quality documentation and records.

- Evaluation of tenders and preparation of tender assessment reports.

- Assist Professional Engineer in liaison preparation and follow up of authority submissions with the respective government agencies.

- Responsible on testing and inspection work of electrical.

- Report to the superior on a daily/weekly basis on the progress of site work.

- Ad-hoc & other duties as assigned by the superior.

Job Requirements:

- Bachelors Degree in Electrical Engineering.
(Universities recognized by PE Board is an added advantage)

- Electrical engineering background is an advantage.

- Have more than 3 year of hands-on design experience in building and/or infrastructure projects.

- Good working knowledge of relevant legislation, regulations, codes of practice, and guidelines.

- Team player and able to work independent with minimal supervision.

- Proficient in AutoCAD and BIM.

- Able to work on construction/outdoor conditions.

- Being able to start work immediately would be an advantage.

- Good project management and technical skills.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

BROAD FUNCTION

A dedicated and proactive IT Support Engineer with a strong foundation in supporting environments primarily consisting of Windows devices and the Microsoft 365 suite.

Manage IT assets and responsible for troubleshooting/repair, providing technical support, and ensuring seamless end-user IT operations.

Effectively support the organization's IT needs, contribute to a positive user experience, and grow within the role.

ROLES AND RESPONSIBILITIES

• Provide Technical Support: Ensure timely and effective resolution of technical issues related to windows devices and Microsoft 365 applications, minimizing downtime and maintaining productivity.
• Enhance User Experience: Deliver high-quality customer service and support to end-users, ensuring their IT needs are met and they are satisfied with the solutions provided.
• Maintain IT Infrastructure: Assist in the maintenance and optimization of the IT infrastructure, including performing routine updates, backups, and system monitoring to ensure smooth operations.
• Support IT Projects: Contribute to various IT projects and initiatives, providing support and collaborating with the IT team to achieve project goals and improve IT services.
• Develop Technical Skills: Continuously learn and develop technical skills to stay updated with the latest technologies and best practices, enhancing the overall capability of the IT support team.
• Documentation and Reporting: Create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps, ensuring knowledge is shared and easily accessible within the team.
• User Training and Education: Conduct training sessions and create user guides to help end-users effectively utilize Windows devices and Microsoft 365 applications, promoting best practices and reducing common issues.
• On Rotating Roster: Provide standby support during off-office hours and weekend on a rotational basis.
• Ad-Hoc Assignments: carry out any other tasks assigned by the Supervisor or Reporting Officer.

EXPERIENCE

• Technical Support: Provided first-level support to users, resolving issues related to Windows devices and Microsoft 365 applications. Assisted in setting up new workstations and configuring user accounts.
• Incident Management: Logged and tracked support tickets using IT service management tools. Ensured timely resolution of incidents and escalated complex issues to senior engineers when necessary.
• System Maintenance: Performed routine maintenance tasks such as software updates, system backups, and virus scans. Monitored system performance and implemented necessary optimizations.
• User Training: Conducted training sessions for end-users on best practices for using Windows devices and Microsoft 365 applications. Created user guides and FAQs to assist with common issues.
• Collaboration: Worked closely with the IT team to support various projects and initiatives. Participated in team meetings and contributed to the continuous improvement of IT services.

SKILLS

• Technical Support: Proficient in diagnosing and resolving hardware and software issues on Windows devices. Experienced in providing remote and on-site support to end-users.
• Microsoft 365: Skilled in managing and troubleshooting Microsoft 365 applications, including Outlook, Teams, OneDrive, and SharePoint. Familiar with user account management and license allocation.
• Windows OS: Strong understanding of Windows operating systems (Windows 10/11), including installation, configuration, and maintenance. Knowledgeable in Active Directory for user and group management.
• Networking: Basic knowledge of networking concepts such as TCP/IP, DNS, DHCP, and VPN. Capable of troubleshooting connectivity issues.
• Customer Service: Excellent communication and interpersonal skills, with a focus on delivering high-quality support and ensuring user satisfaction.
• Documentation: Ability to create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps.

QUALIFICATIONS

• Diploma or Bachelor's Degree in IT with minimally 3-5 years of relevant experience.
• With relevant certifications such as CompTIA A+, Microsoft Certified: Modern Desktop Administrator Associate, Azure Fundamentals, CCNA, or equivalent will be an advantage.

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

Ground Labs is seeking a Senior Software Engineer to join our high-performing team working on diverse products and technologies. Based in our Singapore headquarters, you'll collaborate closely with our engineering and product teams. We're a fun-loving team passionate about our work.

Who you are:

• An experienced backend or full-stack software engineer with at least 7 years of development experience.
• A champion of clean, efficient, and high-quality code
• A creative problem solver with strong analytical skills
• Self-motivated and proactive, with a passion for continuous learning of new information and technology

What you'll do:

• Develop new product functionality and fix software bugs
• Participate in all phases of software development (specification, design, development, documentation, unit testing, code reviews)
• Work with Customer Support and customers to troubleshoot and resolve issues
• Research new technologies and prototype solutions
• Contribute to software design and architecture improvements
• Manage software availability, latency, scalability, security and efficiency

What you bring:

• Degree/Diploma in a computer science or closely related field.
• Hands-on experience in modern C++ development
• Experience developing software for multiple platforms (Linux, UNIX, Windows…)
• A solid understanding of databases, computer network, software security and cloud hosting platforms
• Proficiency in design patterns and software development best practices
• Experience working in an agile environment
• Experience in developing scalable, multi-threaded, low latency systems
• Ability to work efficiently with existing codebases
• Ability to take ownership of product components
• Excellent written and oral English communication skills

Join Ground Labs and be part of our exciting journey:

We're a people-focused company that takes pride in what we do and has fun doing it. If you're a driven developer who thrives in a collaborative environment, we invite you to join our team!