As a KNX Control Systems Engineer you will perform both offsite and onsite implementation of various control systems, including but not limited to KNX. Working as part the technical team, you will assist with design, implementation and support as required.

You will work closely with customers and other professionals to achieve the desired results. There are excellent opportunities for career progression in the long term, and training on control technology, whilst working on unique and exciting projects

Key details

• Evaluates electrical systems, products, components, and applications by designing and conducting research programs; applying knowledge of electricity and materials.
• Installation & commissioning of KNX and various other integrated systems
• Prepare bills of materials
• Mixture of office & on-site works
• Coordination work with owner, sub contractors and vendors.
• Install, start-up, perform testing and commissioning of electrical control panels at work and site.
  Provide Electrical and Control Panel layout drawings
• Perform T&C and training to customers and co-workers.
• Offsite testing where possible simplify onsite implementation
• Complete timesheets or service ticket details as required
• Onsite implementation and commissioning of systems
• Design assistance to the sales department
• Installation & commissioning for the projects department
• Remote & on-site support for the service department

Job Description

• Responsible for the full spectrum of M’s Bridge functions, including the set-up, commissioning, troubleshooting and generation of reports
• Provide technical advice and guide team members for commissioning of M’s Bridge systems
• Perform data collection and analysis
• Perform software troubleshooting and liase with relevant stakeholders to resolve technical issues
• Liase with factory and other departments to resolve issues where necessary
• Perform Escalator / Lift / Group control software configuration including uploads/downloads & traffic studies using Windows & legacy software (eg. MS-DOS).
• Perform PC Hardware and software installation & troubleshooting
• Perform data collection, analysis and preparation of various reports, including but not limited to monthly/quarterly/yearly callback analysis reports
• Assist with customer presentations as and when required
• Assist in training activities
• Other duties as assigned

Job Requirement

• Candidate must possess at least a Degree in Computer Technology or Electrical/Electronics Engineering.
• Minimum 3 years of relevant working experience in similar industry
• Knowledge of legacy software like MS-DOS, PC hardware/OS troubleshooting would be an advantage
• Self-motivated and a fast learner
• Customer-oriented with good communication skills
• Able to take charge of a team or work independently when required
• Resourceful with good organizing skills

Candidates with more experience shall be considered for a senior position.

Interested applicants are invited to send your updated resume in MS Word format via APPLY NOW.

We regret that only shortlisted applicants will be notified.

Job Responsibilities

• Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes.
• Responsible for planning of Annual Inspection, Full Load Test, 150% brake Test
• Handle planning of daily schedule and manpower schedule and deployment
• Liaise with internal and external stakeholders on planned inspection schedule and follow up
• Responsible for ensuring of compliance of safety regulations and ensure equipment are safe and maintained with the highest standard
• Attend to clients and to resolve any issues
• Ensure inspections are completed as per schedule
• Assist employees to ensure knowledge of all quality standards and ensure compliance to all quality manual and procedures

Job Requirement

• Minimum 5 years’ of relevant experience in the same industry
• Minimum Diploma in Mechanical / Electrical / Electronic or Technical Certificate from accredited Technical Institute
• Able to work in team and cope in a fast-paced environment.
• Clear written and verbal communication skills
• Customer-oriented with good inter-personal skills

Interested applicants are invited to send your updated resume in MS Word format via APPLY NOW.

We regret that only shortlisted applicants will be notified.

Job Description

• Lead a team of Service Engineers and IT Admins
• Monitor team’s progression on all incoming service requests on hardware or software issues
• Execute all assigned cases effectively and efficiently with a sense of urgency
• Provide timely and effective resolution to service requests and incidents
• Handle high volume of client’s service requests and assigned accordingly to the team
• Handle client’s complaints and ensure customer satisfaction during closure
• Liaise smoothly between internal stakeholder and clients for any sales-related matters
• Provide on and offsite support if needed
• Manage Service Engineers daily schedule
• Manage team’s transportation and phone claim usage
• Assist in other ad-hoc tasks assigned by Technical Manager

Job Requirements

• Bachelor’s degree in relevant field or equivalent combination of education and experience
• Minimum 3 to 5 years of related experience
• Motivated and able to initiate work process
• Strong leadership skill with good communication
• Excellent customer service and support skills
• Possess and in-depth knowledge of PC/laptops/notebooks hardware (i.e. knowledge of parts)
• Possess strong organizational skills and ability to prioritize tasks among many competing requests

Job Scope:

• Responsible for full spectrum of the Company’s quality standard
• Issue, maintain and file all QA reports (e.g. 8D report)
• Ensure maintenance of proper records pertaining to quality related issues
• Send QA reports to vendors
• Ensure timely closure and response of all QA issues
• Ensure effective corrective action taken for all NCR/CAR issued
• Follow up with vendors on their corrective action for rejected parts
• On-site audit at vendor’s location whenever required
• Conduct FA inspections
• Issue, maintain and file FA reports
• Maintain and upkeep Quality Management System and Quality System Procedure in accordance to ISO9001

Trait, Skills and Qualifications:

• Diploma / Degree in Electronics Engineering
• Possess knowledge of ISO9001
• Knowledge on ERP system would be an added advantage
• Resourceful and able to work independently
• Good at problem solving, negotiating and communicating
• · Team player

Job Descriptions:

• Drives systems development from concept to production
• Translate the product requirements into a functional system with a detailed technical design plan
• Create and maintain all the relevant Hardware design document, schematic design drawings, layout diagrams, Gerber, verification documents and reports
• Proactively assess the technical risks and resolve the design issues by providing reliable solutions
• Ensure Electrical regulatory compliance and thermal dissipation requirements are fully met with proven design solutions and design practices
• Lead and manage the product electronics design with in-house design team, ODM and OEM suppliers
• Maintain effective communication with internal stakeholders as well as internal functional groups (local and overseas) in order to track and report the project status
• Manage all development projects in accordance with Brady development processes and tools
• Ability to apply advanced electronics engineering principles and theories to complex issues. Demonstrates broad knowledge in the field.
• Interfaces effectively with other departments in the solution of problems or issues.

Job Requirments:

• Bachelor degree in Electrical Engineering background
• Minimum of 5 years’ experience as Electrical Engineer
• Ability to support firmware engineers on Boot loader/ BSP (Board support Package) development and debugging
• Experience in Altium Designer is an advantage
• Experience in Digital design, I/O Interface, Timing, Power, Thermal and cost analysis
• Involvement in product design development and production transfer
• Experience in Embedded mixed signal hardware design, especially in multi-layer PCB's using Microprocessors, DDR2/DDR3 Memories, SLC NAND, Stepper and DC Motor Drivers, USB Hub controllers, Ethernet transceivers, DACs, ADCs, LVDS Controllers and FPGA/CPLDs.

1. JOB DESCRIPTION

Job Title

BMS Technical Engineer

Occupation

Technical Engineer

Job Description & Requirements

Automated Lab specializes in office automation technologies, light control, network and BMS system. We represent some of the most exciting and interesting automation brands today, in an exciting emerging industry with tons of opportunities.

We are seeking a motivated technical engineer to become part of our dynamic and successful team.

Technical Engineer

Requirements:

• IT, Engineering or Technical Background
• Must have experience in Schneider EBO or PME solutions
• Diploma in Electrical/Electronics/ Information Technology and others
• Experience in HVAC, ACMV a plus
• BMS, KNX programming experience will be an advantage
• Experience with Schneider BMS products and system an advantage
• Understand basic wiring and cabling, Electrical or IT knowledge
• Experience in Lighting, AV, Electrical, BMS a plus.
• Training will be provided to entrants to industry
• Relevant background is an advantage.
• Experience with wiring or electrical installation, design a plus but not necessary.
• Candidates should be independent, eager to learn, possess hardworking attitude and enjoys meeting people.

Roles and responsibilities:

• Development of Drawing/designing of interior control Systems and schematic based on tender and Customers’ requirements
• Drawing wiring and cabling and equipment plans supporting schematic plans
• Implementation of wiring and cabling and equipment installation.
• Explain wiring and other requirements to electricians and contractors involved.
• Installation of Building Mgt, Lighting Control and Smart Office systems
• Programming of systems control. (Training will be provided. Background in programming a plus)
• Be able to communicate the company’s products and system to clients.
• Work with contractors on electrical installation projects
• Hands on with installations

Candidates available for shorter term contracts can also be considered.

1. JOB DESCRIPTION

Job Title

BMS Technical Engineer

Occupation

Technical Engineer

Job Description & Requirements

Automated Lab specializes in office automation technologies, light control, network and BMS system. We represent some of the most exciting and interesting automation brands today, in an exciting emerging industry with tons of opportunities.

We are seeking a motivated technical engineer to become part of our dynamic and successful team.

Technical Engineer

Requirements:

• IT, Engineering or Technical Background
• Experience in PLC Automation in office and building
• Diploma in Electrical/Electronics/ Information Technology and others
• Experience in HVAC, ACMV a plus
• BMS, KNX programming experience will be an advantage
• Experience with Schneider BMS products and system an advantage
• Understand basic wiring and cabling, Electrical or IT knowledge
• Experience in Lighting, AV, Electrical, BMS a plus.
• Training will be provided to entrants to industry
• Relevant background is an advantage.
• Experience with wiring or electrical installation, design a plus but not necessary.
• Candidates should be independent, eager to learn, possess hardworking attitude and enjoys meeting people.

Roles and responsibilities:

• Development of Drawing/designing of interior control Systems and schematic based on tender and Customers’ requirements
• Drawing wiring and cabling and equipment plans supporting schematic plans
• Implementation of wiring and cabling and equipment installation.
• Explain wiring and other requirements to electricians and contractors involved.
• Installation of Building Mgt, Lighting Control and Smart Office systems
• Programming of systems control. (Training will be provided. Background in programming a plus)
• Be able to communicate the company’s products and system to clients.
• Work with contractors on electrical installation projects
• Hands on with installations

Candidates available for shorter term contracts can also be considered.

We seek an experienced Sales & Application Engineer to promote and provide technical support for our control valves and on-off valves product lines. The ideal candidate will possess a strong technical background, excellent communication skills, and a results-driven sales approach. This position will provide you with the opportunity to put your engineering & technical knowledge that you equipped to good practice and learn from the industry leading manufacturers.

Key Responsibilities:

Sales:

· Identify and pursue new sales opportunities for control valves and on-off valves.

· Develop and maintain relationships with existing customers, OEMs, and EPCs.

· Negotiate and close sales deals, meeting or exceeding sales targets.

· Collaborate with cross-functional teams to ensure customer satisfaction.

Application Engineering:

· Provide technical support for customers, ensuring proper product selection and application.

· Conduct site visits, assessments, and troubleshooting as needed.

· Develop and present technical proposals, product presentations, and training sessions.

· Configure and size control valves and on-off valves for specific applications.

· Collaborate with customers to understand their technical requirements.

Technical Expertise:

· Stay up-to-date with industry trends, market developments, and competitor activity.

· Provide technical training to customers, sales teams, and distributors.

· Develop and maintain technical documentation, data sheets, and application guides.

Administrative:

· Manage sales pipeline, forecasting, and sales reporting.

· Maintain accurate customer records and sales data.

· Participate in trade shows, conferences, and industry events.

· Review technical & commercial contracts for compliance.

· Knowledge in ERP for Sales/Order management system.

· Provides support to meet business objectives and any initiatives with reference to the Sales and Operations Planning (S&OP), On-Time Delivery (OTD) and Operational Excellence (OE).

· Strong communicator and show excellent interpersonal skills and be results orientated.

· Other duties & responsibilities as assigned.

Requirements:

· Diploma and Bachelor's degree in Mechanical Engineering, Chemical Engineering, or related field.

· Minimum 2- 3 years of experience in sales and application engineering for control valves and on-off valves.

· Strong technical knowledge of valve applications, fluid dynamics, and process control.

· Excellent communication, presentation, and negotiation skills.

· Proven sales track record and ability to meet targets.

· Ability to travel (up to 50%).

· Proficiency in CAD software, valve sizing tools, and industry-standard software.

Desirable Skills:

· Experience with industry-specific regulations (e.g., API, ASME).

· Knowledge of control valve sizing software.

· Familiarity with industrial automation and control systems.

· Certification in sales, marketing, or engineering (e.g., CE, PE).

· Language skills (additional languages).

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail, and supply chain.

We are currently looking to hire Application DevOps Engineer.

This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Job Type: One-year Renewable Contract

Job Description:

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Preethi Kanthappan

Reg No: R1765546

Avensys Consulting Pte Ltd

EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Lead a project team in the following for Mechanical (M&E) services for building projects:

• Concept designed.

• Detail design development.

• Contract documentation.

• Authority submission.

• Site administration to project completion.

Requirements:

• Singaporean / PR.

• At least 5 years of working experience in the related Building Consultancy/Project Management field.

• Bachelor’s Degree in Mechanical or related discipline.

• Good inter-personal skills.

• Self driven and able to work independently.

• Basic Proficiency in AutoCAD and BIM.

Salary: $4,500 to $5,000

Lead a project team in the following for Mechanical (M&E) services for building projects:

• Concept designed.

• Detail design development.

• Contract documentation.

• Authority submission.

• Site administration to project completion.

Requirements:

• Singaporean / PR.

• At least 2 years of working experience in the related Building Consultancy/Project Management field.

• Degree in Mechanical or related discipline.

• Good inter-personal skills.

• Self driven and able to work independently.

• Basic Proficiency in AutoCAD and BIM.

• Salary $2,500 to $3,500

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

Duties and responsibilities:

1. Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

2. Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

3. Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

4. To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

5. Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

6. Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

7. Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

8. Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

9. To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

10. To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

11. To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

12. Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

13. To be actively involved with quality management system of the company.

14. Perform any other duties as assigned by higher management or superior.

Key Responsibilities:

• Lead the implementation and configuration of cybersecurity solutions such as Identify Management, Next Generation Firewalls, Anti DDoS, SIEM or Cloud Security.
• Collaborate closely with different stakeholders to design and implement cybersecurity policies, procedures, and workflows based on business requirements.
• Serve as the subject matter expert on the assigned cybersecurity solutions, providing guidance and support to internal team and customer.
• Execute the design, solutioning, deployment, and integration of cybersecurity solutions.
• Conduct troubleshooting and issue resolution related to the Managed Services offered.
• Collaborate with stakeholders to gather requirements and propose solutions that meet business objectives and regulatory compliance.

Qualifications:

• Minimum of at least 3 years in a hands-on or presales role.
• Solid understanding of identity and access management principles, security controls, system and networking.
• Proven Experience with other cybersecurity solutions such as SIEM, Firewall, Anti DDoS protection, Microsoft Security solutions, and other IAM solutions are welcome to apply.
• Excellent communication skills and the ability to effectively collaborate with technical teams, business stakeholders, and external vendors.
• Relevant certifications in CyberArk (e.g., CyberArk Certified Delivery Engineer), Microsoft Security (SC or AZ Track), Netwitness will be advantageous.

Job Description:

• Identify and troubleshoot issues in circuit boards using testing tools like oscilloscopes and multimeters.
• Perform visual inspections and utilize specialized tools to find defects or faults on the board.
• Solder and desolder components to replace damaged or malfunctioning parts.
• Use rework stations and hot air tools for efficient component removal and replacement.
• Conduct functionality tests on repaired boards to confirm they meet required standards.
• Keep comprehensive records of repair work, including fault details and resolution steps.
• Capable of adjusting PCB design to address component obsolescence.
• Keep current with new repair methods and tools.
• Engage in training sessions and workshops to advance technical skills.
• Parts teardown, re-assembly, re-certification and qualification
• Troubleshoot PCB Electronics

Requirements:

• Miniumum Diploma / Degree in Electronic/Electrical Engineering
• At least 4 years of experience in troubleshooting of PCB Re / Semiconductor Components.
• PCB repair and maintenance in a huge advantage.
• Strong diagnostic and troubleshooting skills.
• Excellent communication and customer service skills.
• Ability to work independently and in a team environment.
• Familiarity with industry standards and best practices for PCB maintenance.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24124

What will you do?

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.

• In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Responsibilities:

- Handling existing and developing new accounts

-Assist on Technical solution to customer application

-Meet the Monthly sales Target

-Establish and maintain good rapport with the assigned customers.

-Effective handling of customers' issues

Job Requirements:

-Candidate must possess at least a Graduate Diploma Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic), Engineering (Industrial), Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding), Engineering (Mechatronic/Electromechanical) or equivalent.

•At least 1 year(s) of working experience in the related field is required for this position.

•Applicants must be work independently

•specializing in Engineering - Mechanical or equivalent.

Excellent written and verbal communication skills, strong interpersonal skills, presentation skills and negotiations skills

Fluent in spoken and written for English and Mandarin

Result-oriented and work well under pressure

•Full-Time position(s) available.

•Oversea Travelling required

•5.5 work day

Enlitho Pte Ltd (“Enlitho”) is a deep-tech precision engineering company that specialises in Micro-Nano Engineering services, with a focus on the Biomedical, Optics, and Photonics industrial sectors. As a Mechanical Design Engineer at Enlitho, you will fulfill a crucial role in the development and integration of systems for manufacturing micro-nano devices.

Core Responsibilities

The ideal candidate will be responsible for the following:

• Designing and developing system specifications and requirements and performing engineering design calculations
• Analysis and preparation of detailed drawings for machine layout, components and sub-assemblies
• Drafting of necessary documentation detailing system design, test procedures, results, bill of materials, project planning, etc.
• Engaging with vendors for fabrication of parts and procurement of components and hardware relevant to the system
• Contribute to system testing, assembly, calibration and maintenance.

Background

The candidate should have a minimum of 1 year of experience (3 years for diploma holders) in mechanical or automated system design and a degree/diploma in Mechanical Engineering or a similarly relevant discipline.

Ideal Skillsets

The ideal candidate possesses the following skillsets:

• Proficiency and experience in 2D & 3D CAD (Solidworks, AutoCAD, etc.)
• Strong analytical skills and good knowledge of structures and materials
• Experience and familiarity with machine control hardware such as motors, sensors, robots, motion and I/O controllers, as well as machine vision hardware such as cameras, lighting, lenses, etc.
• Strong background in the design and construction of mechanical systems, preferably in automated systems design
• Core IT literacy and proficiency with MS Office Applications

The following will be considered a bonus:

• Relevant experience with micro-fabrication, microfluidics or other similar micro-nano devices
• Relevant experience with semiconductor processes (lithography, etc.)
• Relevant experience with manufacturing and process line development

Job Description

1. Establish action plan for all sales promotions
2. Drive sales growth through maximization of resources and execution of market segment strategies
3. Secure active customer relation data management within the assigned area
4. Establish / Maintain campaign results report to track progress and impact of marketing initatives and take appropriate actions in case of deviation
5. Achieve sales target set by management in assigned area
6. Assist ASM in supporting channel partners technically
7. Provide market and competitor intelligence on monthly base
8. Monitor customer, competitor activity and gather general market information and feedback to headquarter.
9. Create and maintain strong customer relationship with top notch customer service.

Requirements

• Diploma/Degree in Mechanical / Electronics Engineering
• Minimum 5 years of sales experience in multi-national industrial environment, preferably with wire processing machines, and more than 3 years in sales management
• Good basic understanding in industrial machinery, automation and software
• Excellent communication, presentation, and negotiation skills
• Ability to work independently and as part of a team
• Willingness to travel overseas and visit clients (up to 30% of time)
• Singaporeansa and PR only

Job Highlights

• Ensure the accurate engineering and execution of all mechanical and electrical works.
• Coordinate with other project personnel to ensure that deadlines, procedures, and project requirements are met.
• Report on the progress of the M&E works as directed by the project manager.
• Involves in the inspection, testing and commissioning of MEP works.
• Inspection of all incoming materials on-site for electrical and mechanical works as per material approval.
• Reviews site clarification, queries for site inspection: looks ahead program for critical items.

Requirements

• Diploma in Mechanical/Electrical Engineering
• Technically competent in applicable fields of Mechanical and Electrical Engineering
• Commercially astute and appropriate software skills
• Pay attention to details
• Good Team Player
• Positive attitude
• only for Singaporean/SPR

Interested candidates please submit updated resume via APPLY NOW.

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Company Overview

We are looking for energetic and dynamic candidates to join our team.

“Your Job, Your Joy”

Through our professional support, we would like to enhance our

services and values by making “Your Job, Your Joy” society.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Responsibilities:

• Responsible for day‐to‐day IT operations and provide full technical support to ad‐hoc/maintenance customer for all set‐up, installation, configuration, upgrade, maintenance,troubleshooting, migration of desktops/notebooks PCs’ hardware/software, data and associated peripherals;
• Possess basic experience in LAN/WAN network administration of CLI switches, firewall administration and wireless access point;
• Ability to diagnose and recommend solutions for technical issues promptly. Respond and coordinate system fault recovery activities and cyber security incidents;
• Deploy, manage and maintain software and database;
• Apply patches, upgrades and configuration or other procedures as required;
• Control and maintain files access permission on servers;
• Manage proper backup is performed and restored in periodically basis;
• Implementation and upkeep of IT security policies;
• Manage IT inventory control and all requisition matters;
• Play an advisory role to Management on technical problems, IT upgrading and trends;
• Must be able to travel all over the island;
• Other work assigned by Manager;

Requirements:

• Professional Certificate/NiTEC, Diploma/Degree;
• Computer Science/Computer Engineering/Information Technology or equivalent;
• Minimum 2 year of working experience in IT infrastructure and/or the related field;
• CCNA/CCNP certification is an added advantage;
• Familiar with Microsoft OS (XP, Windows 7, Windows 8, Windows 10, 2003, 2008 and 2012), server support in end user environment, Active Directory, Backup Executive, Firewall and Switches, SQL database;
• Knowledge in network management and troubleshooting;
• Well‐organized, able to prioritize work tasks and executive with minimal supervision, responsible;
• Keen to learn, explore, disciplined, and responsible. Able to think ‘out‐of‐the‐box’ and have an aptitude for innovation and problem solving;
• Good communication skills, positive attitude, team player, resourceful and resolve problems independently;
• Possess Class 3 driving license is an advantage;

(A) Essential Job Functions:

The Design Engineer (Geotechnical) is responsible, but not limited to, the following:

• Coordination of Geotechnical works for construction.
• To attend meetings with Client, subcontractors and consultants, etc.
• Attend to site issues, ensuring timely response of RFI, coordinate CO substantiations, material costing and estimation.
• Liaise closely with internal and external parties as well as the authorities to resolve structural design discrepancies and construction issues.
• Coordinate with consultants an liaise with authorities for updates and submissions of project design.
• Manage and resolve production, quality, design & engineering and schedule issues.
• Liaise and coordinate with other stakeholders and consultants on the design and technical issues relating to temporary works.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum Degree holder in Civil/Structural Engineering or Geotechnical Engineering or its equivalent.
• At least 3 years of engineering experience in the Construction industry.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.