Responsibilities:

• Duties include, but not limited to application support, troubleshooting, advise customers on technical and application issues, preventive maintenance, repair and calibration activities
• Able to complete administrative tasks associated with service field, balance customer visits and requests, documentation and reporting to supervisors and management
• Apply your technical knowledge and experience to solve technical problems and perform complex repairs onsite, via phone or email
• Travel to customer sites for repair and preventive maintenance
• Assure that repair, calibration and service work is performed in compliance with the manufacturer specification
• Establish and maintain positive relationships and promote service products

Requirements:

• A background of Chemistry with minimum 2 years’ experience in analytical instrument field, calibration, troubleshooting and repair of instruments
• Strong computer, communication and customer service skills
• This position requires a highly motivated individual that is capable of completing assigned tasks with little supervision
• Possess valid driving license

Salary will commensurate with qualifications and experience. Interested candidates are invited to write in with full curriculum vitae, current and expected remuneration, recent photograph and contact numbers to:

Provide process engineering expertise for process design, process scale-up, trouble-shooting and process efficiency improvements. Interrogate laboratory working directions to determine optimum plant configuration to ensure that the process [chemistry + plant] meets the scale-up objectives in a safe manner. Support capital projects for R&D Jurong.

Key Responsibilities

Lead process engineering activities for NCE projects in the pilot plant

• Review of chemistry scale-up requests with Chemists, Operations and Engineering to determine optimum plant configuration.
• Define detailed plant and modification design. The time period for introducing new chemistry onto plant is usually less than 4 weeks, during which time any new equipment requirements must be identified, designed, fabricated, installed [by on-site staff or contractors], commissioned, tested and operating staff trained in use before chemical processing starts.
• Agree level of hazard assessment with Operations and complete Process Risk Assessment.
• Review batch record, carry out installation checks, write WI [Work Instruction] or SOP [Standard Operating Procedure] as required and train operators.
• Support campaign on plant, troubleshooting any engineering issues.

Technology Transfers

• Generate sufficient process engineering information for GSC to ensure that the process can be effectively introduced into the desired production plant.
• Support synthetic organic chemists, process safety scientists, and process chemists in the design of processes suitable for effective scale-up.
• Assess critical process characteristics and requirements as well as existing plant capabilities and limitations by gathering and interpreting suitable experimental data.
• Significantly contribute to the development of robust manufacturing processes for the synthesis of bulk drug substance by evaluating alternative processing strategies and recommending potential process improvements.
• As a member of the ChemDev project team, identify and effectively communicate the best suitable scale-up strategy for a process including recommendations for the application of new processing technologies.
• Play an important role in facilitating a seamless technology transfer of processes to GSC by the application of state-of -the-art tools and procedures.

Capital Projects

• Act as client representative for capital projects, to ensure all the customer needs are incorporated into the design and installation of new plant and equipment.
• Identify areas of weakness in the portfolio of processing technologies (plant and equipment) and submit proposals to address these.
• Define and seek approval for the detailed project scope of plant and equipment projects, and obtain approval for capital orders and PIP's.
• Review and make recommendations on design proposals put forward by contractors, project engineers, and equipment suppliers.
• Organise HAZOP studies, act as technical recorder, and issue HAZOP report for all installations where appropriate.
• Issue commissioning programmes, lead commissioning activities, and issue final reports.
• Carry out pre-delivery inspection visits for new equipment, prior to acceptance on site.
• Compile equipment WIs.

Knowledge, Skills & Experience

• Min A level certification
• Experience in pharmaceutical industry
• Experience in pharmaceutical process
• In depth working knowledge of the safety and compliance requirements for equipment and systems used in it.
• Strong written and verbal communication skills.
• Ability to multi-task and prioritize workload

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.

Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

1. Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
2. Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
3. Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
4. Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
5. Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
6. Perform site EHSS inspection/audits and ensure that all corrective / preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
7. Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
8. Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Knowledge:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.

Skills:

• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.

Abilities:

• Operational hands-on experience
• Work under pressure and multi-tasking.
• A good team player and have good interpersonal skills
• Safety conscious

Education:

Degree/Diploma in Mechanical Engineering or equivalent

Experience:

• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process

Competencies:

• Fast Learner
• Willingness to learn
• Self-Initiative
• Team Spirit
• Self-responsibility
• Physical Fit

Working Conditions:

Chemical Production Environment. A skin allergy/blood count medical test may be required as part of the employment medical checkup.

JOB DESCRIPTION

• Manage projects from conception to completion, including planning, budgeting, and coordinating with cross-functional teams.
• Conduct thorough testing and inspection of mechanical systems to ensure they meet performance and safety standards.
• Provide technical support and expertise to production and maintenance teams, troubleshooting and resolving mechanical issues.
• Prepare detailed reports, technical drawings, and documentation for all projects and maintenance activities.

JOB REQUIREMENTS

• Diploma in Mechanical Engineering or in a related field.
• Must have minimum 2-3 years of electroplating experience
• Minimum 3 years experience in mechanical engineering, preferably in the Oil & Gas, Marine, or Industrial sectors.
• Proficiency in CAD software (e.g., AutoCAD, SolidWorks) and other engineering design tools.
• Strong analytical and problem-solving skills with the ability to troubleshoot problem.
• Excellent verbal and written communication skills.
• Ability to work collaboratively in a team environment, as well as independently when required.

Service Engineer

We are at the heart of every place that matters: as a leading global provider in the access solutions market, we enable people to move seamlessly in safe, secure and sustainable places.

Do you want your work to matter? Then join our team!

At dormakaba, more than 16,000 people from all over the world work together and grow together. If you are looking for exciting career prospects, if you want to fuel innovation and like tackling new challenges, then we would love to hear from you!

Our Singapore Service team is always on the lookout for talents and help you reach your best potential!

Role & Responsibilities

· Provide customer support for our Company’s products such as handling their enquiries with tact and courtesy.

· Perform on-site advice, installation, preventive maintenance and repairs of our Company products.

· Offer aftersales solutions and training to customers on product features, configuration, usage and maintenance.

· Proactive in informing customers of additional product and services we offer.

· Handle all essential resources, materials and equipments for effective and efficient delivery.

Key Competencies

· Good level of customer service experience.

· Good communication skills to enable interaction with internal and external customers.

Qualification:

· NITEC/ Diploma in IT/Engineering/Electrical/Mechanical/Computer-related or equivalent discipline.

· Candidates without prior working experience are welcome as on-the-job training will be provided.

· Possess a valid Singapore Class 3 Driving License.

Benefits:

· Learning culture where every employee is engaged in learning and development growth.

· Team programs and activities that celebrate individual and team’s success.

· Long service award recognition for our committed and dedicated colleagues.

· Health insurance and flexi-benefits cater for the employee’s health and wellness.

Is this you? Access your career at dormakaba today!

Diversity, Equity & Inclusion is part of our overall business and sustainability strategy. We consider all applicants equally throughout the whole recruitment process without regard to culture, age, ethnicity, gender identity, disability, marital status, language, national origin, physical/ mental ability, religion, sexual orientation, socio-economic status, underrepresented communities, etc. We do not use unfair selection methods for any of our positions, all employees are appointed based on performance and suitability for the role

Duties & Responsibilities

1.Draft process improvement idea with the objectives to improve process / occupational safety, improve product safety / quality, reduce energy consumption, improve production capacity / productivity, and reduce costs.

2. Implement Process Improvement idea via Management of Change system and/or Non-regular work system.

3. Coordinate, arrange and plan new grade trial run with R&D and Operation team, and handle the trial run and the evaluation.

4. Evaluate process performance and key process parameters from long term view and/or periodically to uncover potential risk that may leads to plant instability, safety or quality issues.

5. Troubleshoot plant trouble related to process, perform root cause analysis and propose corrective and preventive measures as process engineering function and/or based on request basis.

6. Participate actively in HAZOP , FMEA and Control plan studies as Process engineering function for safety and quality improvement.

7. Oversee Process related capital expenditures project from conceptual design up to Front End Engineering Design (FEED) and Lead the project assigned by (assistant) manager of department.

8. Study and implement Industry 4.0 related technologies as part of Productivity Improvements and Process improvement Projects

9. Participate in Company EHSQ program and cooperate with its promotion and improvement.

10. Collaborates with other departments in Management systems such as ISO9001, ISO14001, ISO45001, SS651, IATF16949, Safety Case regime, Energy management system and ISCC plus as process engineering function

11. Perform study as Process Engineering Function such as NRW, MOC and as per request from other departments.

12. Keep and maintain safe and health work environment.

Requirements

1. A Bachelor / Master’s Degree in Chemical Engineering

2. 3 year(s) of working experience in Petrochemical Industries (Preferred).

3. For Senior position, at least 5 year(s) working experience in Petrochemical Industries.

4. Possession of Singapore Certified Energy Manager (Preferred)

5. Familiarity with Safety Case Regime

6. Familiarity with IATF 16949 standard (Preferred)

7. Familiarity with ISO9001, ISO14001, ISO45001 and SS651.

8. Familiarity with IEC 61511 standard (Preferred)

9. Familiarity with Process Simulation software such as Aspen Plus®, Aspen

HYSYS®.

10. Familiarity with Distributed Control System (DCS), in particular its logic and sequence modification.

11. Able to multi-task and handle a wide spectrum of responsibilities.

12. Good interpersonal skills and strong analytical skills.

Professional are responsible for identifying, analysing, and relating business

demands. Your respnsibilities include aligning priorities, planning and actions

to the overall business objectives. And involve business stakeholders. You will

share and communicate knowledge and innovation. You have knowledge of

the fundamentals of the Semco business model and the value chain.

Assist the Project Manager / Lead Engineer in smooth running and

implementation of the project

Key tasks & Responsibilities:

• Technical compliance with customer specifications

• Ensure proper checking/approvals are always done

• Preparation of project specifications according to customer requirements

• Prepare preliminary drawings to customer

• Preparation of block diagrams and project-related calculations, etc.

• Review vendor bids technically and take part in vendor selection

• Review vendor document submission

• Effectively communicate to customer and vendor to ensure system proposed

meets customers’ expectations

• Coordinate with other systems/packages to ensure system interfaces are

addressed

Main tasks & responsibility:

• Design

• Preparation of drawings

• Preparation of specifications for procurement of equipment

• Develop detailed system design with diagrams and schematics.

• Selection of telecom equipment

• Develop bulk material listings

• Provide input for preparation of selected reports, weight, equipment list,

function and fabrication / installation

• Coordination with other disciplines

• Professional responsibility

Main principal duties:

• Participate in all engineering phases:(Feasibility, Concept, FEED, Detailed

design)

• Understand and interpret requirements from customers and authorities.

• Clarify design certification with customers and 3rd party.

Minor tasks & responsibility:

• Participation in customer visits

• Participation in technical project meetings

• Occasionally take part in quatation and sales, commissioning activities

Requirement:

Degree in Electrical/Electronic Engineering or Relevant Degree.

At least 3 years relevant experience.

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Job Description.

• Maintains project schedule by monitoring project progress and coordinating activities.
• Liase with sub-contractors constantly to ensure timely progress and assisted in preparing progress reports.
• Provide advice and resolve any emerging problems.
• Ensure workmanship, procedures and method statements are in accordance to specified standards
• Orders materials and equipment and takes care of the permits, performing equipment, material, and routine site inspections.
• Orders materials and equipment and takes care of the permits, performing equipment, material, and routine site inspections.
• Ensure site safety and prepare safe work procedure with Safety personnel.
• Establishes and maintains excellent working relationships with clients.
• Any ad-hoc duties as assigned

Job Requirements.

• Diploma or Bachelor of Engineering (Electrical/Mechanical/Civil)
• At least 2 years of relevant working experience
• Good knowledge in detailed design of engineering works
• Familiar with codes of practices, relevant regulations and submission requirements
• Self-motivated and able to work independently.
• Good communication skills, both verbal and written in English

Responsibilities:

• Reviews technical specifications, drawings, procedures, and standards pertaining to project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents, and weekly update drawing register form documents controller and distribute to project Quality Assurance personnel.
• Administrates the project's internal quality audit to ensure compliance with the project quality plan.
• Monitors the inspection and documentation activities of the Quality Assurance Inspector to ensure compliance with the inspection test plan and project quality requirements
• Resolves quality-related issues arising from subcontractor and in-house production
• Ensures protection and preservation of various systems
• Ensures updates on electrical completion and mechanical completion progress in the project database
• Assigns the systems to be tested by the various supervisors and technicians involved in the operation
• Reviews the quality work processes to enhance efficiency and productivity
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, Quality Assurance Department, and vendors
• Reports non-conformance and issue improvement notes where necessary
• Any other assigned duties and responsibilities

Requirements:

• Degree in Naval Architecture, Marine and Offshore or Electrical Engineering
• Minimum 3 years of relevant experience in Quality Assurance working experience, and the offshore or marine industry

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

We are seeking a skilled and motivated Project Engineer / Senior Project Engineer specializing in ship repair and ship refit. The ideal candidate will have at least 5 years of relevant experience in the maritime industry and possess strong project management and technical skills. This role involves managing repair and refit projects from initiation to completion, ensuring compliance with technical, quality, and regulatory requirements.

Job Description

1. Project Management:

• Manage ship repair and ship refit projects, from planning through execution and delivery.
• Develop detailed project schedules, budgets, and resource plans.
• Coordinate with clients, vendors, and internal teams to ensure project objectives are met.

2. Technical Expertise:

• Oversee progress and technical requirements for repair and refit projects.
• Interpret technical drawings, design documents, and specifications.
• Provide guidance and suggestion to production teams during execution.

3. Quality Assurance:

• Ensure all ship repair and refit work adheres to established quality standards.
• Conduct inspections to verify compliance with design specifications and classification requirements.
• Address quality issues promptly with effective corrective actions.

4. Regulatory Compliance:

• Ensure all work complies with relevant maritime regulations and standards.
• Collaborate with regulatory bodies to secure necessary approvals and certifications.

5. Communication and Coordination:

• Maintain clear and effective communication with clients, team members, and stakeholders.
• Provide regular project updates and reports to management and clients.
• Facilitate problem-solving discussions to address challenges and maintain progress.

6. Risk Management:

• Identify potential risks to project timelines and budgets.
• Develop and implement mitigation strategies to reduce impact.
• Monitor risks and adapt plans as needed to maintain project success.

Qualifications:

• Min. of Diploma in marine engineering, Mechanical Engineering, or a related field.
• Minimum of 5 years of experience in ship repair or refit project engineering.
• Strong understanding of ship repair processes, techniques, and materials.
• Proficient in project management with a proven ability to deliver projects on time and within budget.
• Strong leadership, organizational, and team collaboration skills.
• Excellent communication and interpersonal abilities.

Preferred Attributes:

• Familiarity with High-speed craft systems and operational requirements.
• Experience coordinating with regulatory authorities and international clients.
• Completion of SRM (Shipbuilding and Repair Management) course is an advantage.

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

· Manage and grow customer base on the assigned product range.

· Prospecting sales visits and regular follow-ups to customer relationship

· Offer commercial and technical proposals or quotations according to technical specifications and customer requirements

· Tender preparation, sales presentations, conversion of prospects to customers and after-sales service

· Gather regional market and competitor information (technical, prices and product development), ensure meeting pre-determined targets.

· Formulation and execution of market growth strategies for tasked Segment and territories

· Collaborate and work with other department/ regional offices to maximise growth and orders

· Prepare and deliver technical presentations and demonstrations to clients

· Collaborate with the engineering and product development teams to understand product specifications and capabilities.

· Oversee and coordinate the installation and implementation of products and systems.

· Ensure projects are completed on time, within scope, and within budget.

· Prepare and present sales proposals, contracts, and agreements.

· Track and report on sales performance and progress against targets.

· Maintain accurate records of customer interactions and transactions.

· Provide post-sales support to ensure customer satisfaction and repeat business.

· Address customer inquiries and resolve issues in a timely and effective manner.

· Gather customer feedback and work with internal teams to improve products and services.

· Traveling within the designated region to meet clients and manage projects as require.

· Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Requirements:

· Diploma in Marine/Mechanical/Electrical/electronic/Engine

· Possess good sales and customer service knowledge

· 7-10 years of sales experience in marine diesel engine or marine equipment related experience.

· Self- motivated, independent and sales driven to develop and increase revenue

· Strong learning curves in upgrading technical knowledge

. Excellent presentation and negotiation skills

· Regional travelling is required

· Good oral and written communication skills in English and Chinese

. ⁠Other assigned duties

For more information, please reach us at [email protected]

*Only shortlisted candidates would be notified*

Purpose: To create, control and manage changes to customer's Technical Product Data (TPD) packages (Items, Bill of Materials, Product specification documents) in the Product Lifecycle Management (PLM) and Enterprise Resource Planning (ERP) systems. To deploy TPD changes to the relevant Persons-in-Charge (PICs) for execution.

Key Area of Responsibilities:

• Check the correctness and completeness of product packages, such as Technical Product Data (TPD) and Bill of Materials (BOM) received from customers.
• Work with the user of TPDs to define the new TPD requirement and update the ISO document (for new customers or any change in TPD requirement).
• Maintain required customer items, BOM, and TPDs in PLM and ERP systems.
• Create and control the item part number, BOM and TPD in the PLM and ERP systems.
• Create projects in the ERP system for the fulfillment of customer Sales orders.
• Implement Engineering Change Order (ECOs) and deploy the changes to the next inline PIC (such as planner, purchaser, process engineer and Sales & Program dept.)
• Check and ensure all required information for the TPD (items, BOMs, documents) and/or configuration change are provided, and approved by the customer.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Science or relevant field.
• Minimum 2 years of working as a product data engineer in the semiconductor industry or similar position.
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in promoting spare part sales, maintenance, operation, equipment installation supervision and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Promoting aftermarkets/replacement spare parts or services for existing and potential new customers

· Identify customer's needs and sales opportunities to help future growth

· Provide technical field assistance in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training or maintenance presentations to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD is a plus point.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Identify, propose and evaluate new business opportunities for business growth, with respect to the sale/purchase of refining products including procurement of intermediate components for value-added feedstock/blending entities, and third-party service collaboration.
• Coordinate with internal and external stakeholders to establish operating, commercial and accounting procedures for managing third-party contracts and agreements.
• Oversee day-to-day refinery performance and ensure stakeholders adherence to contractual quantity and obligations. Liaise and collaborate with stakeholders to resolve issues and concerns.
• Work closely with internal stakeholders to support the needs of refinery feedstock demand and supply of products, to achieve optimal refinery operation.

• Degree in Chemical Engineering

• At least 2 years' relevant experience in oil refinery/petrochemical.
• Experience in process/development engineering or commercial work knowledge will be advantageous