We are looking for Senior Plant & Machinery (Mechanical / Electrical) Engineers for:

Metal Shredder & non–ferrous separation / Metal Shear Plant

Waste Wood-To-Energy Plant

Responsibilities:

• Responsible for ensuring highest possible production and uptime in the scrap processing or WTE plant.
• Responsible for plant production and reliability / perform root cause investigations to increase reliability and general performance of machinery & equipment.
• Target for incident free and reliable operations, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with Best Practices.
• Ensure that preventive maintenance activities are proactively planned, prepared and scheduled with the required level of equipment reliability.
• Liaison with production team and other stakeholders; manage on-going maintenance activities.
• Ensure plant & machinery documentation and Preventive Maintenance (PM) procedures are constantly updated.
• Ensure technical, environmental and safety aspects in all matters are in compliance with the HSE regulations.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree, Engineering (Mechanical/Electrical) or equivalent.
• Required language(s): English & dialect (in order to communicate with dialect-speaking production team and other stakeholders to stay updated on the on-going operations & maintenance activities.)
• At least 2 Year(s) of working experience in the related field is required for this position.
• Required knowledge: hydraulic system, rotating parts, PLC systems, conveyor belts.
• Preferably Executive specialized in Engineering - Mechanical or equivalent.
• Required to work 5.5 days.

Engineer for the product development of door hardware products. (i.e. door closers and floor springs)

An experienced professional responsible for leading and executing entire product development cycles, from new concept design generation, concept and feasibility evaluation, detailed design to prototyping and testing until series production.

Job Responsibilities

• Product development for dormakaba’s surface-mounted and concealed door closers and floor springs.
• Develops and manages new product designs in accordance with project requirements, while adhering to project milestones and schedule.
• Conduct feasibility studies, FMEA, cost analysis and material selection to support design decisions.
• Collaborate closely manufacturers, and suppliers to address technical challenges through DFM & DFA and ensure successful implementation of designs.
• Prepare and present design proposals, progress reports, and project updates to stakeholders, while abiding to timely delivery within project’s budget.
• Utilizes SolidWorks software to generate detailed 3D models and technical drawings for prototypes and production.
• Setup test plans using DOE methodology, analyze test results and iterate design to meet performance and quality standards.
• Participate in team design reviews, providing constructive feedback and contributing to continuous improvement initiatives.
• Collaborate with cross-functional teams, such as manufacturing, quality assurance, and marketing.

Job Requirements

• Bachelor’s Degree in Mechanical/Material Engineering is required.
• Min 3 years’ design experience in a product development environment, contributing to a product’s successful delivery into series production will be preferred.
• Experienced in designing springs, custom gears (e.g. rack and pinion, worm drives), cam drives, bearings and hydraulic systems.
• Skilled in material selection for steel and aluminum, with expertise in manufacturing processes, including machining, cast iron / aluminum casting, metal forming and heat treatment.
• Knowledge in theoretical calculations related to the field of statics, dynamics and kinematics.

Full Time

Location: Jurong

DUTIES AND RESPONSIBILITIES

1. Develop, implement and maintain quality management systems based on ISO standards.

2. Oversee the day-to-day quality control operations, ensuring compliance with established standards and procedures.

3. Providing guidance, training, and support to ensure consistent quality outcomes to quality control inspectors and technicians

4. Conduct regular audits and inspections to identify areas for improvement, non-conformities, and opportunities for enhancing quality processes.

5. Collaborate with production, engineering, and other departments to establish and enforce quality standards at all stages of the product lifecycle.

6. Enhance the development and execution of quality control plans, including sampling techniques, testing methodologies, and documentation procedures.

7. Manage the documentation of quality control activities, including inspection reports, test results, and corrective action plans.

8. Monitor and analyse quality metrics to track performance and identify trends, presenting findings to management and suggesting improvement strategies.

9. Stay up-to-date with the latest developments in ISO and OCO certifications, as well as industry best practices, and incorporate them into the quality management system.

10. Co-ordinate ISO audits by external certification bodies, ensuring all necessary documentation is in place and readily accessible.

Qualifications and experience:

· Bachelor's degree in a relevant field (Quality Management, Material Engineering, Manufacturing, etc.); advanced degree or certifications are a plus.

· Minimum of 3 years of experience in quality control, with a focus on ISO certifications.

· Strong understanding of ISO 9001 Standards, with the ability to interpret and implement their requirements effectively.

· Knowledge on Component FAI / PPAP / PSW from supplier are a plus

· Must be able to write and communicate in Mandarin and English as the position requires liaison and communication with China counterparts on equipment and material matters

· Proven experience in managing quality control teams, driving continuous improvement initiatives, and fostering a culture of quality excellence.

· Proficiency in quality control methodologies, statistical analysis, and root cause analysis techniques.

· Excellent communication skills, both written and verbal, with the ability to present complex technical information to diverse audiences.

· Detail-oriented mindset with exceptional organizational and problem-solving abilities.

· Familiarity with quality management software and tools.

· Strong leadership skills and the ability to collaborate effectively across departments.

Personal Qualities:

· Proactive, driven and resilient

· Able to work independently and as part of cross-cultural team

· Meticulous, accurate and attention to detail

Job Description:

• Provide pre and after sales technical support to customers
• Perform field service work on site for our range of products
• To clarify product applicaton issues with head office R&D in Japan
• Support Sales Engineers in the areas of product applications, sizing and selection of suitable SMC components to meet end user requirement

Job Requirement:

• Diploma in Electronics/Mechatronics
• Experience in control system (servo drive)
• Minimum 5 years of experience in PLC programming (Omron, Panasonic, Beckhoff, Allen Bradley etc) for senior position

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a skilled Process Engineer to design, implement, and optimize processes. Key responsibilities include reviewing process design documents, participating in safety and design reviews, managing change control, vendor relations, and quality risk assessments. You will oversee commissioning, qualification, and validation activities while ensuring HSE compliance. Additionally, you'll troubleshoot process issues, manage deviations, and provide SME input. Collaboration with stakeholders, SOP generation, and completing training on time are essential for success in this role.

Key Responsibilities

• Lead Process Design: Develop and review key process design documents (P&IDs, PFDs, URS, data sheets) to ensure optimal system performance and compliance.
• Drive Safety & Design Excellence: Contribute to safety and design reviews (3D models, HAZOP, DQ) to guarantee robust and safe process designs.
• Manage Project Changes: Oversee site and project change control, ensuring smooth transitions and effective execution of process improvements.
• Vendor Relationship Management: Cultivate strong vendor partnerships, ensuring timely and high-quality deliverables.
• Engage in Quality Risk Assessments: Actively participate in risk assessments to enhance process quality and minimize operational risks.
• Review & Approve Documents: Ensure all relevant technical documents are thoroughly reviewed and approved, maintaining high standards.
• Monitor & Report Progress: Track and report the status of assigned projects and tasks, ensuring transparency and alignment with timelines.
• Coordinate Field Work & Commissioning: Lead and coordinate field work, including commissioning, qualification, and validation activities, ensuring smooth implementation of processes.
• Champion Health, Safety & Environment (HSE): Take full ownership of HSE responsibilities in your designated area, ensuring strict adherence to safety standards.
• Solve Process Issues: Troubleshoot and resolve process-related issues, applying your expertise to maintain smooth operations.
• Manage Deficiencies & Deviations: Effectively address any deficiencies or deviations, working proactively to resolve them.
• Provide Expert Input: Offer Subject Matter Expert (SME) input as needed, driving improvements and operational excellence.
• Support SOP Creation: Contribute to the development and refinement of Standard Operating Procedures (SOPs) to streamline operations.
• Collaborate with Stakeholders: Coordinate with key stakeholders to ensure alignment and successful project outcomes.
• Ongoing Learning: Complete required training on time, keeping up to date with the latest tools, technologies, and industry standards.

Required Qualifications

• Minimum Degree in Engineering or Science Disciplines
• Minimum 3 years’ experience in a related field / Pharmaceutical Industry
• Proven track record in following and promoting Safety in all aspects of your role
• Strong process and automation knowledge, adequate knowledge in utility and HVAC
• Project management / coordination experience
• Proactive and self-motivated
• Adequate knowledge on cGMP and other regulatory requirements, guidelines and industry best practices
• Be IT literate and familiar with Microsoft office suite of applications
• Demonstrated proficiency of written and verbal communication skills in English (including technical writing and presentations) with ability to communicate and collaborate effectively with technical and senior management staff

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a Validation Engineer to manage and execute validation activities, including equipment, utilities, and facility qualifications. You will develop and support the creation of validation documentation, apply a science-based approach to validation, analyze data, and assist with investigating deviations. Collaboration with cross-functional teams and adherence to safety, quality, and regulatory standards are key aspects of this role to ensure the successful delivery of validation projects.

Key Responsibilities

• Lead and complete critical validation activities, including equipment and utilities qualification, facility qualification (aligned with EU Annex 1), and thermal mapping for controlled temperature chambers to ensure precise temperature control and compliance.
• Perform thorough thermal mapping as part of the qualification process for temperature-controlled chambers, ensuring that all temperature conditions are validated according to industry and regulatory standards.
• Develop and support the creation of essential validation documentation, such as Risk Assessments, plans, protocols, and reports.
• Apply a science-driven and risk-based approach to all validation activities.
• Analyze, interpret, and summarize data from thermal mapping and other validation studies to ensure compliance and operational accuracy.
• Investigate and support the resolution of deviations or non-conformities identified during thermal mapping or other validation activities.
• Collaborate effectively with stakeholders, including cross-functional teams, clients, and corporate functions, to ensure seamless project delivery.
• Guarantee the safety, quality, and timely completion of thermal mapping and validation projects.
• Ensure adherence to validation lifecycle processes (e.g., URS, FAT/SAT, commissioning, IO/PQ protocols) and compliance with international regulatory standards.

Required Qualifications

• Bachelor`s degree in a science or engineering discipline.
• Minimum of 2 years of experience in pharmaceutical CQV.
• Strong understanding of validation lifecycle processes and regulatory guidelines.
• Familiarity with industry best practices for equipment and utilities qualification.
• Fluent in written and spoken English.
• Adaptable to a fast-paced, dynamic work environment.
• A quick learner with a proactive "Can-do" attitude.
• Exceptional time management skills with strong attention to detail.
• Proficiency in presentation and facilitation is an advantage.

Why join us?

• Generous Leave Policy including Elderly Care Leave for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions?
If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are seeking a Utilities Engineer to ensure the proper maintenance and compliance of facility systems and equipment according to design specifications and GMP standards. The engineer will be the Subject Matter Expert (SME) for the operation and maintenance of utilities systems, offering technical expertise for routine operations readiness. Responsibilities include ensuring adherence to standards, supporting the development of commissioning and qualification documents, and ensuring compliance with regulatory requirements. The role also involves troubleshooting technical issues, collaborating with teams, and promoting knowledge sharing.

Key Responsibilities

Operational Excellence, Continuous Improvement, and Daily Operations:

• Lead and support continuous improvement initiatives for utility system operations, maintenance, and reliability programs.
• Establish key metrics to ensure optimal performance of utility operations.
• Lead and support utility projects by reviewing engineering design documentation and related drawings.
• Lead and support Site Acceptance Tests (SAT), commissioning, and system testing to meet User Specification Requirements (URS).
• Participate in system walk-downs to ensure reliable utility system operations.
• Safety and Quality Compliance Management:
• Lead and support audit readiness for regulatory inspections to ensure compliance with site and global SOPs, GEP, and GDP.
• Assist in the development, revision, review, and approval of Standard Operating Procedures (SOPs), Risk Assessments, Preventive Maintenance Programs, and Job Plans.
• Lead and support deviation investigations, ensuring Corrective and Preventive Actions (CAPA) are implemented to prevent recurrence.
• Lead and support change control and evaluation initiatives for continuous improvement, enhancing system reliability and operations.
• Actively promote and practice Amgen's Safety Culture.

Sustainability:

• Lead and support the site sustainability program, analyzing energy consumption data, benchmarking overall usage, and identifying opportunities for optimization.
• Lead and support the development of business cases to drive sustainability targets for the site.
• Generate utility consumption data for regulatory authority submissions.

Required Qualifications

• Diploma/Degree in Engineering, Mechanical, Electrical, Chemical
• Ability to work independently and collaboratively
• Good interpersonal and communication skills with high computer literacy
• Strong team player, able to effectively work within and across teams
• Fluency in communications skills, both oral and written, including presentation skills
• Familiar with documentation in a highly regulated environment
• Interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Ability to tactfully negotiate and positively influence peers
• Strong analytical skills to identify potential improvement opportunities

Why join us?

• Generous Leave Policy including Elderly Care Leave to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Requirements:

• Bachelor's degree in Electrical Engineering, Automation, or a related field.
• Proven experience in industrial automation systems, control circuits, and programming languages such as Python, C, or equivalent.
• Familiarity with industrial communication protocols, fieldbus protocols, MCCBs, contactors, and electrical schematics.
• Strong problem-solving and troubleshooting skills.
• Experience working at stations in overseas locations.
• Willingness and ability to travel and be stationed in developing countries and work in high stress environment and multitask.
• Minimum of 1 year of experience in marine equipment training and work in the marine field.
• Knowledge or experience with Dual Fuel (DF) Engines is a significant advantage.
• Required skills to communicate with customers for Sales and technical assistance.

Job Description:

• Support the implementation and execution of Marine / Industrial Remote Monitoring System projects.
• Perform troubleshooting, maintenance, and repair of electrical systems and circuits.
• Train and assist the overseas team in electrical engineering processes and best practices.
• Provide support for other technical needs as required.
• Assist with IT troubleshooting and maintenance of on-site IT equipment.
• To support the sales activities.
• Expand sales for existing & new customers and product portfolio and Implementing marketing strategies and analyzing trends and results.

Company Description

Working at Boskalis is about creating new horizons and sustainable solutions. In a world where population growth, an increase of global trade, demand for (new) energy and climate change are driving forces, we challenge you to make your mark in finding innovative and relevant solutions for complex infrastructural and marine projects.

Within a vibrant company culture, you will be working as part of a diverse, international team of experts. We offer you the opportunity to realize your full personal potential and expand your professional career by creating new horizons. Together!

Job Description

As a Salvage Engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to get the ship systems up and running again. You are responsible for the vessel maintenance, trouble shooting, and on-site repairs of our salvage equipment. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, reports to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager to set up the right maintenance procedures and carry out the planned maintenance system of our equipment.
• Sharing knowledge with other engineers about complex ship's systems and maintenance solutions.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities

To make your mark as a Salvage Engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• An experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Ability to handle heavy duty diesel machineries, hydraulic, pneumatic and basic electrical etc.
• Willingness to work on weekends and public holidays frequently.

Qualifications

What you can expect

• Career opportunities: We challenge you every day to get better. Together we realize your full personal and professional career by creating development opportunities.
• Warm welcome: We warmly welcome our new colleagues, so they feel at home as soon as possible. During your onboarding program, we give you all the ins and outs of Smit Salvage!

Extra information

• Your team: As a Salvage Engineer, you will work for SMIT Salvage Singapore. You will work for one of the largest salvage companies in the world. You are part of a team of 6 Salvage Engineers. You will also work with various other colleagues who are part of the Salvage team.
• Where you will work: You will work at our warehouse in Singapore (23 Gul Road) and at project locations onboard vessels worldwide.
• Procedure: You can easily apply by filling in the online application form and uploading your CV and cover letter. You will always receive an immediate confirmation of receipt by e-mail. It is not possible to apply by email, the contact form or by post. Depending on the position, we invite you for two or more job interviews. If you have successfully completed all steps, you will receive an offer from us and we would like to welcome you to Smit Salvage Singapore!

Additional information

We’ll be happy to answer your questions about the position of Assistant/Salvage Engineer. Please contact Arshad Asharaf, corporate recruiter via our careers page.

Interested? Please apply by filling in your details and by uploading your cover letter and CV on our careers site.

Disclaimer for recruitment and selection agencies

We appreciate your interest in our vacancies and understand that your candidate might be enthusiastic about this exciting opportunity. However, our recruitment process is not structured this way, at Boskalis we handle recruitment ourselves. Therefore, we do not accept unsolicited applications or CVs from recruitment agencies. Any submission will be treated as a direct application.

LI-AASH

JOB RESPONSIBILITY

• Responsible for building and facility services, system operations and maintenance program
• Ensure all the works are carried out safely and in accordance with safety work procedures
• Oversees the Building Automation System (BAS) and other systems within the BMS/BASCO/FRC room, including ensuring the smooth operation (within the acceptable limits and are run safely, effectively and economically) and timely rectification of the M&E equipment and responding to all alarms as part of the drive to achieve KPIs.
• Manage and assign Corrective Maintenance (CM) and Preventive Maintenance Work order (PM) using the CMMS (Computerized Maintenance Management System) to the maintenance staff accordingly.
• Lead the coordination and communication process of rectifying the faults between the maintenance staffs, vendors and contractors.
• Manage a team of technicians in attending to breakdown calls.
• Responsible to undertake maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Develop working schedule / duty roster for the team.
• Ensure all building and facility systems are operational within the acceptable limits and are run safely, effectively and economically
• Responsible for conducting preventive and corrective maintenance program in accordance with the standards, all corporate policies and legislated regulations
• Liaison with OEM /system contractor for all building services & regularly solicit feedback from maintenance staff regarding fault status and feedback to users.
• Assists in Business Continuity, Emergency Operations and Exercises such as Fire Drill/Evacuation exercise, major equipment breakdowns, major power shutdown, disease outbreak and incidents where deemed to be of top priority. Activates Recall protocol for emergency situation.
• Provide feasible solution and coordinate with owners/users, consultants, vendors/contractors on engineering function requirement
• Conduct regular inspection of existing building equipment and its serviceability status
• Review service reports and escalate any finding or action that is required
• Assist in the Development, maintenance and the regular review and test of SOP/EOP
• Advice and lead the technical investigation / troubleshooting for rectification works
• Investigate and determine root cause of faults and report
• Prepare and submit regular reports to Management and Customer, with analytical findings and propose improvements.
• Provide training to technician /technical officers, and junior staff as necessary
• Undertake any ad hoc assignment requested or delegated by the AFM/FM as required for the operational needs
• Senior Grade level would have the below additional job responsibilities & deliverables:
  Participate in Ops Meeting and ensure follow-up items for BASCO issues (campus level) are closed in a timely manner.
  - Chairs BASCO Trade meetings with NUH Customer on a regular basis and to follow-up with delegation of tasks to ISS team to ensure completeness in follow-ups.
  - Lead the planning for BASCO coverage at assigned building and on campus wide for CERT requirements
  - Overall accountable for training and uplifting the competency and familiarity of BASCO team members on-site.
  - Target to reduce 15% month-on-month of Open RM items, by proposing practical solutions for customer to implement.
  - Perform on-boarding program for any new joiners to BASCO Team at NUH ISS. This can be done on a fixed-monthly frequency including existing staff as part of the refresher training.
  - Overall visibility & control of the BASCO team & performance at site. Key target is to hold internal bi-monthly meetings and foster camaraderie and team bonding among the team. Target is to establish full contractual compliant BASCO team and achieve 95% attendance rate.
  - Oversee and report the Emergency Recovery Equipment list at a cluster level and on a predefined frequency to ensure all equipment are operational functional and readiness.
  - Overall BASCO Lead during working / Shift Hours and leads in handling any key events / incidents, while working closely with other BASCO team members across the campus for manpower deployment, cross-support or coordination works.

JOB REQUIREMENT

• Degree in Mechanical Engineering / FM discipline with minimum 3 years experience; or Diploma in Mechanical Engineering / FM discipline with minimum 5 years of relevant experience;
• Preferably minimum 2-3 years of working experience in a facility management environment in a hospital / clean room / pharmaceutical will be preferred.
• Pro-active, ability to prioritize work and achieve desired result
• Independent, able to work with minimum supervision and have a good understanding of critical workflow
• Able to communicate and write well in English and Mandarin
• Able to work on Monday to Friday (Shift 1) 0700-1600 Hrs (Shift 2) 1100-2000 Hrs; Saturday 830am to 1230pm.

Responsibilities:

- Review technical documents and work together with sales managers to close sales

- Prepare technical calculation and commercial proposal in timely manner

- Provides technical assistance to clients relating to the design and use of products

- Maintain good customer business relationship

- Coordinate with regional partners

- Provide support to Outside Sales and work closely to achieve the sales target

- Monitor and update status of sales quotes and proposals

- Various other sales related tasks as assigned.

Requirements:

- Diploma in Chemical/ Engineering/ Mechanical/ Mechatronics discipline or equivalent

- Good understanding in Mechanical Instrumentation & Controls or Valve Automation

- Good communication, interpersonal and customer service skills

- Willing to learn and a good team player

Job Description:

•Upkeeping test lab and adherence to the lab operational requirements in accordance to the Organisation Principle PQS

•Conduct testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)

•Conduct qualification test of new product or revised component with issuing of test report and recommendations to the test findings

•Develop test scripts, issues tracking and test management

•Prepare samples and coordinate with PQS EN or certification bodies for product certifications

•Manage annual notified body surveillance testing and follow up on non-conformance cases

•Support investigations of product failures

•Actively participate and manage projects to meet deadline

•Evaluation and analysis of competitors’ products – teardown analysis, VA/VE

Job Requirements

•Diploma/Degree in engineering with minimum 2 years of experience, preferably with working experiences in production quality or test lab environment

•Good hands-on skills in hand tools and able to handle installation of fixtures/machinery with weight up to 30kg

•Possess good knowledge in failure analysis of metals and materials related products

•Experience with testing or life cycle management tools an advantage

•Familiar with CAD software is preferable

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.

JOB DESCRIPTION:

• Develop and manage the mechanical engineering works schedule in alignment with the overall project master schedule.
• Collaborate closely with clients, consultants, subcontractors, and other departments to address technical matters related to mechanical work.
• Possess the necessary qualifications, competencies, and skills to effectively manage and supervise mechanical works.
• Lead the on-site mechanical construction team to ensure smooth execution of work by subcontractors.
• Ensure full compliance with relevant standards, codes of practice, and safety regulations.
• Oversee all Mechanical issues on-site to ensure proper resolution.

REQUIREMENT:

• Diploma in Mechanical Engineering.
• Minimum 3 years’ working experience in the Electrical / Mechanical Engineering construction industry experience;
• Possess strong mechanical knowledge with hands-on experiences;
• Strong Knowledge of Mechanical details, working drawings and local construction practices

· Report to Project Director / Project Manager.

· Attend site visit and prepare cost estimation.

· Co-ordinating and follow up all the individual respective project team like Civil, E&I, Scaffolding, Automation, Passivation, Safety, Lifting and others.

· As a Controls Engineer you should perform a vital role in designing and developing systems for manufacturing operations.

· Draft tender documents and cost estimation spreadsheet.

· Design layouts, materials and information flow, or machine placement.

· You should responsible to evaluating performance and proposing and implementing improvements new or existing systems.

· Present final figures and unit rates to management.

· Submit tender documents and attend clarification meeting (if requested by client).

· Attend project/ safety meeting with client/sub-contractor/internal and prepare minutes of meeting.

· Prepare overall construction detail schedule for the project.

· Plan, coordinate and execute the job to meet the schedule and quality requirements.

· Prepare / review of project specification, P&ID and material take-off.

· Handling all technical queries and investigating all work-related problems and coordinating with client/sub-contractor/supplier to clarify the problems.

· Ensure the Safety, Productivity and Quality of the project.

· Prepare Method of Statement (MOS), Inspection Test Plan (ITP), Project Schedule and other working procedures.

· Ensure the installation / erection works meets the specification and requirements.

· Liaise with QA/QC personnel and ensure all the works comply with the requirements.

· To carry out inspecting and rectifying any unsafe practices and unsafe place of work.

· You will oversee the safety and job/ project operation.

· Prepare weekly / monthly progress reports/ safety reports/ manpower reports etc.

· You are to direct, guide and manage all tasks under your charge and ensure it is carried out in the most creative, efficient and professional manner to the best of your ability.

· You shall ensure, uphold and comply with all office standards, local by-laws and regulatory requirements.

Job Description & Responsibilities:

Reporting directly to the Assistant Project Manager, Project Manager, Senior Project Engineer is responsible for the following:

• Lead and manage project supervisors to ensure the successful completion of projects.
• Ensure adherence to project budgets, schedules, and scope of work, while deploying appropriate staff resources.
• Review and assess project drawings, plans, specifications, and other relevant documents.
• Identify and troubleshoot issues arising during project execution and implement timely resolutions.
• Conduct and actively participate in weekly site meetings to monitor project progress.
• Collaborate with the Safety Officer to ensure compliance with quality standards and health & safety regulations.
• Monitor site staff to ensure strict adherence to all safety regulations.
• Strong analytical and problem-solving skills, resourceful and meticulous;
• Highly motivated and pro-active with the ability to work both independently as well as in a team;
• Perform night work based on project needs.
• Prepare and submit project reports in a timely manner.
• Develop project drawings, including as-built drawings and shop drawings, as required.
• Perform any other tasks as assigned by the Assistant Project Manager, Project Manager.

Knowledge/ Skills/ Abilities:

• Knowledge of building and structural details, working drawings and local construction practices.
• Knowledge of local regulations and engineering standards.
• Good verbal and written communication skills.
• Good organizational and interpersonal skills.
• Able to work independently and as a team.
• Good time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.
• Familiar with tender and bidding processes.
• Familiar with local regulations pertaining to building, construction and safety.

Requirements:

· Diploma/Bachelor’s degree in Electrical Engineering or related field.

• Proficient in Microsoft Office (Outlook, Word, Excel and PowerPoint) for Windows.
• Ability to work with flexibility to work long hours when necessary.

· Minimum 5 years of experience in electrical engineering, in Residential/Industrial/Commercial and/ and other types of buildings and/or construction.

• Certification in BCSS (Building Construction Supervisor Safety) or higher safety certification.

· Proficiency in electrical design software (AutoCAD, Revit, Navisworks,BIM360, ACC), strong knowledge of electrical codes and standards, excellent problem-solving and communication skills.

• Manage & develop new customers based for service sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• To identifying and developing sales & marketing strategies to exhaust opportunities in the local market as well as to exploit overseas markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Proficient in Microsoft office applications: Word, Excel, PowerPoint & Outlook

-Proficient in AutoCAD application

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

Job Summary:

We are looking for a highly skilled High Voltage/Medium Voltage Engineer to join our team. The ideal candidate will be responsible for the design, development, maintenance, and troubleshooting of high voltage and medium voltage systems in offshore substations. This role requires extensive knowledge of electrical engineering principles, offshore operations, and safety regulations.

Responsibilities:

• Design and Development: Collaborate with the system supplier to design and develop HV/MV systems and equipment (Electrical, Protection & SCADA) for offshore substations.
• System Analysis: Familiar with Electrical calculations and system analysis to determine specifications and ensure optimal performance to meet client requirements.
• Compliance: Ensure all HV/MV systems comply with relevant safety standards and regulations.
• Inspection and Testing: Perform regular inspections, conduct factory testing and support in field commissioning to assess the technical compliance and performance of HV/MV equipment.
• Troubleshooting and Technical Support: Diagnose and provide technical support in resolving technical issues on HV/MV systems and guidance to junior engineers and technicians.
• Collaboration: Work closely with other engineers, technicians, vendors and regulatory bodies and clients to address and solve problems related to HV/MV systems.
• Documentation: Prepare detailed reports, system architecture diagrams, purchase specifications, functional description and control philosophy to document system designs, construction, modifications, and maintenance activities.
• Preventative Maintenance: Collaborate with the system supplier to develop and implement preventative maintenance procedures for HV/MV systems to ensure safety and performance.

Requirements:

• Education: Minimum bachelor’s degree in electrical engineering or related field.
• Experience: At least 3 ~ 5 years of relevant experience in high voltage or medium voltage engineering, preferably in an offshore environment.
• Skills: Strong analytical and problem-solving skills, excellent communication and teamwork abilities, proficiency in using electrical design software.
• Certifications: Relevant certifications in high voltage or medium voltage engineering are a plus.
• Knowledge: In-depth knowledge of electrical engineering principles, high voltage systems, offshore operations, and safety regulations.
• Innovation: Ability to stay up to date with the latest advancements and best practices in HV/MV engineering.
• Leadership: Capability to lead and mentor junior engineers and commitment to safety.
• Adaptability: Ability to work as a team in challenging offshore environment and possess good planning, organizational, interpersonal skills with adaption to ever-changing

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities

1. Provide front and backend supports for the following security systems:

a. Access Control System – Integrated Security Management System (ISMS);

b. Electronic Key and Cabinet System: Key Management System (KMS);

c. Radio Communications: Digital Trunk Radio System (DTRS);

d. CCTV System – Video Surveillance Management System (VSMS);

e. Entry / Exit Access Turnstiles;

f. Crash Barriers; and

g. Vehicle Alert System

2. Perform corrective and preventive maintenance on all security systems.

3. Ensure critical system fault reported rectified within the shortest possible time to prevent disruption to operation.

4. Update and maintain fault rectification report.

5. Maintain security system stock inventory to ensure sufficient spare.

Job Requirements

• Meet the relevant Regulatory Authority's statutory requirement of minimum 21 years of age.
• Diploma/Higher NITEC/NITEC from a recognized training institute.
• Must be able to work rotating shifts, including weekends and public holidays
• Technical knowledge or experience in electrical/electronic work. IT Network knowledge would be an added advantage.
• Experience in CCTV or card access system.

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]