Description

As a NAND CMOS Process Integration Engineer in the Singapore Technology Development department at Micron Technology Inc., you will be responsible for developing 3D NAND CMOS devices scaling and enhancing their performance, reliability and manufacturability.

Responsibilities:

• Develop and innovate critical CMOS modules. Drive multi-functional teams to optimize existing process flows and develop new innovative solutions to meet product requirements and manufacturability.
• Develop/re-define critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Extract and analyze inline, probe, parametric, reliability, and other critical metrics and predict future behavior of the CMOS device performance of the product to enable early innovative solutions to meet product and device specifications.
• Early introduction, characterization and validation of new CMOS device models and test structures for developing future NAND products.
• 3 dimensions analysis with the use of K2 view to extract layout information and combine with the doping profiles of each implant step for product development and integration solutions.
• Interact and collaborate with TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Coordinate activities at manufacturing site towards gating experiment funding, conversions, and effectively communicate decisions made to all R&D, manufacturing, and relevant partners.
• Take on leadership role at quarterly yield summits and monthly program reviews in summarizing complex problems, deriving and explaining actions taken to address them and getting R&D, manufacturing, and senior management teams on the same page.
• Assist in the transfer of a new technology from R&D to manufacturing and contribute towards ensuring successful ramp and qualification. Supporting the transfer, documentation and training of module fundamentals into manufacturing.

Requirements:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics and Semiconductor Device Physics. Prior technology development and tech transfer/manufacturing experiences are preferred.
• Fresh MS/PhD candidates with knowledge of semiconductor process Integration, device physics and CMOS engineering.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Ability to develop a strong, holistic, end-to-end understanding of CMOS device and its related module on NAND technologies, related structural and electrical fail mechanisms.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection.
• Self-motivated, self-governing with proven ability to work in a demanding and dynamic environment.
• Experienced in coordinating cross-functional teams to achieve a goal.
• Solid data analysis, communication and reporting abilities with demonstrated presentation abilities.
• Curiosity and natural tendency of learning new things independently.
• Ability to travel for extended periods of time to the US for collaborative R&D work.

Working Location: Fab10, 1 North Coast Drive, Singapore 757432

Job description

• Must have relevant experience in Building Management System (BMS).
• Have strong knowledge in designing a system for BMS system.
• Able to manage project cycle independently with minimum supervision.
• Work with external parties and customers to plan, organize and direct activities concerned with assigned projects.
• Develop project schedules in compliance with customer requirements, deadlines, and/or milestones; develop mechanisms to track schedule progress in the field; and update the schedule regularly.
• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Ensure timely completion of all projects particularly the T/C schedules.
• Responsible for project management including attending meetings, coordination, design and plan out shop drawing and submission of documentation and supervision.
• Liaise with consultants, architects and contractors and handle all technical matters.
• Ensure project works compliance with Workplace Safety and Health (WSH) policies and practices.
• Attending site meeting and coordination with stakeholders, external parties and customers to plan, organize and other related activities for the assigned projects.
• As and when to take on new assignments.

Key Requirements

• Degree / Diploma in Engineering equivalent
• Minimum 2 years of relevant working experience
• Have full understanding of Instrumentation HVAC/ACMV control like AHU, Chillers, RCU etc.
• Knowledge of PLC programming (preferably Siemens PLC)
• Experience in SCADA software and strong knowledge of Industrial Control and Building Management System.
• Prefer relevant working experience; prefer with LTA ECS/LCS, TVS project experience.
• Prefer with IEC 61508 and LTA documentation submission.

Duties and Responsibilities:

• Assist review sales handover budget to project department with reference to standards in compliance with the company policies, statutory requirements and contract specifications.
• Ensure project life cycle operation within budget and accordance to ISO set out.
• Perform project management duties including:

i. Project schedule preparation for manager approval

ii. Project submission (Documents & Drawing)

iii. Sourcing and raise Material procurement within budget

iv. Variation work quotation preparation for manager approval

v. Assist review on system implementation design from engineering department

• Responsible for site activities, coordination and supervision works to ensure withing planned schedule including:

i. Installation progress including material procurement & delivery and prepare periodic progress reports

ii. Update of system / drawing on any changes at site

iii. Prepare and attending site inspection. Follow-up for any defect rectification

iv. Testing & commissioning progress

• Ensure project works compliance with Workplace Safety and Health (WSH) policies and practices.
• Attending site meeting and coordination with stakeholders, external parties and customers to plan, organize, and other related activities for the assigned projects.
• As and when to take on new assignments.

Requirements:

• Degree / Diploma in Engineering equivalent
• Minimum 2 to 3 years of relevant working experience
• Must have relevant experience in ELV System (Security Access Control System, PA, Fire Alarm system, Structured cabling, & etc.)
• Have strong knowledge in designing a system for ELV security system
• Able to manage an ELV engineering projects cycle independently with minimum supervision
• Entry level candidates are welcome to apply

As Satellite Planning Engineer, you are responsible to simplify and eliminate manual error through task automation. You will be developing automation for scenario modeling and capital dashboard reporting to provide overview for upper management and give insight for decision making.

This role requires strong programming skill for task automation and scenario analysis with at least 2 years experiences in coding/programming languages or have done automation project related to scenario modeling, data analysis and reporting. Candidates should be flexible, able to maintain global relationships, and possess good communication and presentation skills. Additionally, they need to provide clear data analysis for decision-making and have a detailed understanding of capacity planning, business processes, and scenario optimization opportunities.

Job Description

As Satellite Planning Engineer, you are responsible to simplify and eliminate manual error through task automation. You will be developing automation for scenario modeling and capital dashboard reporting to provide overview for upper management and give insight for decision making.

This role requires strong programming skill for task automation and scenario analysis with at least 2 years experiences in coding/programming languages or have done automation project related to scenario modeling, data analysis and reporting. Candidates should be flexible, able to maintain global relationships, and possess good communication and presentation skills. Additionally, they need to provide clear data analysis for decision-making and have a detailed understanding of capacity planning, business processes, and scenario optimization opportunities.

Responsibilities and Tasks:

[Scenario & Capital Automation Project]

· Develop capital related dashboards to achieve automated data visualization and assist in a more in-depth analysis of site capital expenditure details

· Strive to streamline business efficiency and eliminate manual errors through task automation and simplification.

· Build and automate scenario modeling to support scenario analysis with improved efficiency and accuracy

· Manage databases, scenario ownership and change control

· Analyze data to support financial decisions

· Create, Maintain and update Satellite Sharepoint as golden source of historically approved loading scenarios together with its key metric impact such as capital add/reduction, bit, market share, wafer cost etc.

[Scenario]

· Apply optimization concept and technique to ensure optimal loading volume across horizon able to meet target bit (GB) and market share while considering new technode qual achievement and ramp planning.

· Apply industrial engineering concepts to model the capacity thresholds to support existing and future technology

· Ensure all the required scenario options are well analyzed. Call out opportunity and propose options for better return scenario

· Collaborate with Central teams to plan capacity requirements of future products and to quantify the impact on existing and future capital spend

· Using qualitative and quantitative analysis to explain scenario cause – effect relationship for tooling purchase and capital impact differences

· Provide yellow field Cost of Transition (CoT) for each technode and understand the correlation between theoretical CoT vs actual CoT

· Defining new technode CoT and understand the gap between budget vs actual technode capex

· Adhere to calendar requirements and agreements with respect to Business Planning Process

· Flexible and agile to changes in Business Planning

· Coordinate with all relevant partners to ensure all the parameters updates are in-place so that can be applied correctly for quarterly business plan study

[Capital]

· Perform baseline capital spend analysis to ensure overall cashflow across Fiscal Year is kept neutral (unless driven by loading change)

· Improve capital spend forecast accuracy with site Planning/Procurement/Facilities

· Monitor actual spend performance vs projection for current and upcoming quarter with target variance of < +- 5%

· Monitor and understand with site partners on the reasons for unexpected capital spend changes across fiscal year

· Work with site partners to ensure accurate planning and supplier delivery date data inside Capital Asset Lifecycle Management (CALM)

· Highlight any potential cashflow reduction or savings opportunities

· Keep track of the technode CAPEX

· Work with site partners to ensure actual Scenario Study bottoms up and eventual itemization is as per approved executive review targets

· Coordinate the CALM simulations with site partners and ensure the simulations are able achieve net neutral and completed within committed timeline

Requirements:

· Master/Bachelor's Degree in Industrial Engineering, Manufacturing engineering, Mechanical engineering, Chemical engineering, Computer Science

· Min 2 years experiences/project hands-on in developing automation using programming language such as Python, Java or C+

· Proficiency in developing dashboard and reports using Tableau and Power BI

· Skillful in Microsoft Office particularly Excel as well as Sharepoint management.

· Strong ability to perform data analysis and problem solving

· Strong data validation skills and reporting skills

· Ability to map relevant conclusions to support decisions making

· Ability to work closely and effectively with others in a team environment

· Strong verbal communication and presentation skills

Working location:

· 1, North Coast Drive, Singapore 757432

Roles & Responsibilities

• Planning and organizing projects, including developing project timelines, budgets, and resource plans
• Resolve and coordinate technical issues with Consultants/ Authorities
• Liaise and coordinate works with subcontractors
• Liaise with all parties involved in the project including authorities, consultants, clients, subcontractors and suppliers
• Provide support to supervisors in relation to site works
• Ensure site safety and work with safety personnel to regulate safety standards on site
• Ensure quality standards are maintained, site inspections are carried out and technical/drawing issues are resolved on time
• Ensure proper documentation according to our ISO system
• Assist project manager in planning and execution of project plans at construction site
• Execute project plan and ensure works completed as per schedule and in accordance to contract specification and design drawing
• Attend site meetings and inspections, report regularly on progress and monitor schedule
• Prepare and monitor work schedules, project costing, procurement, and coordination with all partied involved to ensure work progress smoothly and completed within target time and budget
• Supervise and report progress of the work to Project Manager

Requirements:

• Diploma / Bachelor Degree in Civil Engineering or Construction Management or relevant work experience will be considered.
• Minimum 3 years of relevant experience in construction industry.
• Possess good communication skills and team-orientated environment.

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

Have Quality Control experience,can read drawiings,can use measuring tools,can use three-dimensional coordinate measuring instruments,can complete work tasks independently,have a team spirit,can lead a quality inspection team,can be responsible for matters related to the quality inspection department, For quality inspection reports,etc,you will use computer office software and have at least 3-5 years of quality inspection work experience.

Job Responsibilities :

• Enhance Probe’s capability to perform real-time reporting, monitoring and flagging of Production issues using Tableau & customized software solutions
• Develop innovative software solutions for Engineering & Production teams to reduce turn-around time in resolving issues
• Implement code to automate material tracking, product disposition & validation to ensure high-quality products for end-customers
• Collaborate with the worldwide Probe community on projects with significant impact to Probe

Job Requirements :

Education

• Bachelor’s degree in Electronic Engineering, Computer Engineering, Computer Science or equivalent combination of education and experience is preferred

Experience, Skills, Knowledge and Abilities

• Candidates with strong grasp of C, Perl, Linux, SQL, Tableau skills preferred
• Excellent written and verbal communication skills
• Proven ability to handle multiple priorities at once and stay focus on critical issues
• Successfully demonstrated teamwork skills with a strong focus on effective team dynamics
• Strong problem solving skills and the ability to conduct root cause analysis and elimination
• Solid technical judgment with good analytical and problem solving skills
• Proven ability to deliver results while working under pressure

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Roles & Responsibilities

• To support the construction team for M&E engineering works.
• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Oversee and ensure all M&E and related works are carried out in accordance with the approved drawings, materials and method statements, specifications and Authority codes and as per requirements of the project.
• Accountable for all M&E works, site inspections, monitoring of progress of work & variation order
• Responsible for ensuring that all M&E works of the sub-contractors are in compliance to the Company’s and authorities’ requirements
• Review M&E drawings and other materials submissions prepare by the M&E Coordinators to ensure that there are no discrepancies and/or conflicts with the architectural and structural elements
• Conduct inspections for all M&E systems.
• Liaise with consultants, clients and subcontractors on M&E works progress, coordination and decisions.
• To involve, support and assist other aspects of operational needs when assigned.
• Determines project schedule by monitoring project progress, coordinating activities, and resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Handle any other ad-hoc duties and tasks assigned.

Job Requirements:

• Should have Degree/Diploma in Mechanical & Electrical Engineering.
• Min 5 years M&E building service experience in the construction industry.
• Should be Proficient in AutoCAD/BIM Modelling.

Micron Technology’s vision is to transform how the world uses information to enrich life and our commitment to people, innovation, tenacity, collaboration, and customer focus allows us to fulfill our mission to be a global leader in memory and storage solutions. This means conducting business with integrity, accountability, and professionalism while supporting our global community.  Micron’s teams of dreamers, visionaries, and scientists have redefined innovation—designing and building some of the world’s most advanced memory and semiconductor technologies.  Information Security Protection processes from within all business units with connectivity to corporate information security strategy is fundamental to protect Micron’s mission.

As the Frontend Manufacturing IP Security Manager/Principal Engineer, you will be responsible to help transform how the corporate Cyber and Information security strategies connect and integrate into all Micron technology and business teams.  You will work directly with local business unit information security teams to advocate and coordinate global security initiatives within the business areas, bring in real world security threat and awareness training campaigns, as well as leader or general population security awareness campaigns.  A primary attribute of the role is to be the conduit for feedback between Global Security and Micron’s business area teams.  Equally important is working with Frontend Manufacturing teams to internally assess and establish best practices within the business communities while bringing insights from local successes to a broader Micron community.  With business and information knowledge, you will be a partner with Global Security and business leadership to create and enable Micron’s overall security strategy.  In this, you will gain a broad perspective by working on a variety of information sources, control solutions, and dynamic business conditions across a global organization to analyze issues, make well-reasoned recommendations and solve problems to protect and enhance organizational value.

Responsibilities:
• Collaborate and conduit two-way interaction with Global Security Team and business areas supporting roadmaps, strategies, and requirements from both perspectives. Bridge security goals and commitments with articulated business needs driving towards a common set of goals and objectives

• Define clear goals and strategic initiatives to create, advocate, and present across-the-business security campaigns, awareness, and cultural messaging.  Assessments of security influence across Micron

• Understand and lead efforts to meet the requirements of internal and external customers. with Global Security Team, BISO and Data Protection Community to develop associated processes and automation requirements to enable.

• Coordinate with experts on various topics to present and provide education around their areas of expertise.  Create opportunities to increase security knowledge within the Data Security Community

• Coordinate leading and lagging metrics and to security problems, solutions, and business processes.  Partner to enable a business facing dashboard support security strategies and needed efforts

• Provide coordination for the Data Protection Community and BISOs to drive best practices and creative solutions to data security problems.  Drive to enable common guidance and goals (records and access management, unstructured data solutions, vendor and contractor access/data models)

• Partner with BISO representatives to drive best-known-methods within organizations supporting security culture and collaborate opportunity to expand

• Handle escalations and exception approvals for all Global Operations

Requirements :
• Ability to understand and effectively communicate vision and technical concepts in appropriate terminology at all levels of the organization

• Ability to balance security with end user productivity and operational impacts in a large organization to provide transparent, secure solutions

• Strong Agile development knowledge, build in increments and iterate

• Excellent organizational skills and the ability to see solutions to their conclusion

• Ability to be self-directed and a fast learner and ability to gain understanding of new solutions

• A sense of urgency, prioritization, and growth mindset

• Demonstrated ability to promote security practices and drive improvements into organization’s overall security framework

• Advantages with CISSP/CISM/CISA/ISO27001/PMP certification

Education & Experience:

• Bachelors/Masters degree in Engineering or Business Field, Computer Science, or Cyber security related field

• Equivalent experience in industry on Intellectual Property or Cyber Security

• Understanding of information technology general controls, process and structure

• Proven communication skills with multi-functional leaders

• Strong skills in decision-making, prioritization and problem solving

• Strong skills in Project management and organization change management

Identifies, analyzes, monitors and minimizes areas of risk that pertain to information technology. Coordinates closely with the disaster recovery and data security disciplines; all three disciplines (risk management, disaster recovery and data security) may be part of the same department.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

As Facilities Utilities Engineer of Global Construction team, you will be an integral member of the Global Facilities Line Planning Group responsible for overseeing and managing the analytical duties related to facility utilities planning program, assisting in the planning and design of facilities construction and expansion projects. You will be responsible for managing Micron Facility utilities consumption assessment process, analyzing facility future needs and resource utilization analysis.

In this role, you manage utilities related projects, programs and will help to plan and prioritize resources needed to achieve results and assure accurate tracking of projects and programs to predict results and outcomes critical to success.

Responsibilities

• Collect, classify, evaluate utilities data and information used in supporting the facilities utilities consumption management and capital program.
• Create reports, charts, graphs and eventual monitoring system for Facilities Services.
• Define, manage and improve on Micron Tools Utility Matrix (TUM) Business Process.
• Drive network alignment among Micron sites in tools utility matrix (TUM) database.
• Drive network alignment across sites in Tools’ process independent utilities database and eventually moving towards alignment for Tools’ process dependent utilities database.
• Work closely with Teams from Global and Site Facilities, Global Planning, Facilities Transfer Team, CPEE & IEs to coordinate and drive facility utilities estimates for new layout, technode scenarios.
• report program status, wins, issues, and actions to program sponsor for broadcasting to global leadership team and stakeholders
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in wafer fab facilities systems is highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 3 years of Facility or Equipment tool Management experience in Semiconductor manufacturing environment
• Demonstrable experience in the Facility or Equipment tool utilities Management and/or other relevant industries is strongly preferred.

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

JOB RESPONSIBILITIES:

• Assist the Project Manager in developing and managing project schedules.
• Coordinate with architects and contractors to ensure project success.
• Review project plans and electrical design, specifications, and contracts.
• Ensure compliance with building codes, safety regulations, and environmental requirements.
• Monitor project progress and make adjustment as necessary
• Communicate project status to Project Manager
• Manage project risks and identify opportunities for improvement
• Provide technical support to project team members
• Ensure quality control and quality assurance for all project deliverables
• Attend project meetings and facilitate communication among team members.
• Any other ad-hoc projects assigned from time to time

QUALIFICATION:

• Diploma or Degree in Electrical Engineering

WORKING EXPERIENCE:

• For Diploma holder, more than 3 years’ experience in handling project management.
• For Degree holder, 1-2 years similar experience
• Computer literacy in Microsoft Office
• Strong knowledge of construction materials, methods, and regulations
• Experience in managing and supervising construction teams
• Strong problem-solving and decision-making skills

Job Description: We are a well-established no-code app development platform, seeking a highly skilled and adaptable Senior AI Integration Specialist to enhance our platform's capabilities through seamless integration of AI technologies. As a key member of our experienced team, you will be responsible for designing and implementing the integration of various AI functionalities to cater to our users' specific needs.

Responsibilities:

• Lead the integration of AI technologies into our no-code app development platform.
• Collaborate closely with the development team to identify integration requirements and implement efficient solutions.
• Customize AI functionalities to align with our platform's objectives and user interaction flows.
• Design and implement robust backend infrastructure to support AI functionalities' seamless performance within our platform.
• Conduct extensive testing to ensure the reliability and accuracy of integrated AI features.
• Continuously monitor and optimize AI performance to enhance the overall user experience.
• Stay updated with the latest advancements in AI technologies and apply relevant innovations to our platform.

Requirements:

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field.
• Proven experience in integrating AI technologies into web-based or mobile platforms.
• Proficiency in programming languages like Python, Java, or JavaScript.
• Familiarity with cloud-based infrastructure and services.
• Strong problem-solving skills and adaptability to meet dynamic project requirements.
• Excellent communication and collaboration skills to work effectively within a team.

Nice-to-Have Skills:

• Experience with integrating language models like ChatGPT or other AI chatbots.
• Knowledge of dialogue systems, natural language generation, and user experience design.

If you are an experienced AI Integration Specialist with a track record of successfully integrating AI technologies into established platforms, we invite you to apply. Join our team and contribute to expanding our no-code app development platform with the power of AI, delivering even more value to our users.

Job Description

• Diagnose and resolve problems that occur in daily production lines/machines to minimise downtime and quality loss costs.
• Liaise with other departments to develop improvement plans to reduce quality loss costs and other cost savings activities.
• Develop process documentation and operating instructions for new/revised processes and/or products.
• Conduct the planned maintenance work for production machines & equipment to maintain optimum operating conditions.
• Manage Process Change control documents when implementing process and/or location changes on the assigned production process

Requirements

• Diploma or Degree in Mechanical / Mechatronic Engineering
• Min. 2 years experience in electronics connectors manufacturing environment
• Hands-on, enjoy solving problems
• A collaborative teammate
• A strong communicator and an active listener
• Strong analytical skill

JOB DESCRIPTION:

Department: MLCC production

Reports to: Manager

Functional relationships:

- MLCC process engineering in Japan factories

- MLCC related R&D in Japan

- MLCC process engineering in oversea affiliates: China and Philippines

POSITION PROFILE:
The Product Planning Engineer will drive improvements in the MLCC manufacturing process (post-process) and product quality, efficiency, and manufacturing costs through specialized knowledge of processes and products. This role includes providing technical training to local engineers focused on the post-processing aspects of MLCC manufacturing.

Key Duties & Responsibilities:

• Policy and Strategy Alignment: Collaborate with Japan HQ or other affiliate companies to align policies and strategies for project initiatives.
• Problem Solving Meetings:Initiate periodic meetings with Japan HQ or other affiliates to address issues within the division effectively.
• Quality Improvement:Enhance the quality of MLCC products by focusing on post-process improvements.
• Cost Reduction Initiatives: Propel efforts to reduce costs associated with MLCC products while maintaining quality standards.
• Efficiency Enhancements:Improve the efficiency of MLCC manufacturing post-process operations.
• Technology Transfer:Facilitate the transfer of new technologies from Japanese factories to Singapore factory.
• Bridge Between Teams: Serve as a liaison between Japanese factories and related R&D departments, ensuring timely access to necessary information for effective implementation into MES factory.
• Technology Grasping & Proposals: Stay abreast of new technologies; propose improvements in quality, cost, efficiency, and safety based on this knowledge.
• Technical Training Organization:Organize and deliver technical training sessions for local engineers focusing on best practices in post-process.

Ability/Competency required:

• Master degree in engineering field
• At least 2 years working experience in electronics manufacturing industry
• Deep & specialized technical knowledge in plating process and to be able to fully utilize it in actual job for improvement
• Fluent in Japanese and English language to liaise with Japan factories & R&D departments
• Logical thinking, analytical skill and good engineering sense
• Strong mind-set for change and improvement
• Proactive attitude and strong communication and interpersonal skills
• Networking ability with MLCC related functions

Responsibilities:

• Design cooling and heating systems and follow through the deployment
• Drive thermal designs with numerical approaches, model based analysis
• Conduct experiments to validate designs
• Develop and optimize automation scripts for numerical analysis tools
• Support thermal management for electronics
• Involve in precision and mechatronics design work occasionally

Requirements:

• Min. Degree or higher in Mechanical Engineering / Physics or relevant disciplines
• Good understanding of thermal technologies including computational modeling and calculation
• Min. 1-2 years of working or research experience in thermal system design is preferred
• Knowledge in precision machine design, CFD or thermal modeling tools is a plus

Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements

• Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Engage in active participation in Package Development Engineering activities
• Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need
• Create decision matrix for equipment and material selection

Evaluate and qualify new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create and owner of purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional teams
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives
• Feedback loop for Continuous Improvement after mass volume production via collaborate with production and HVM team on existing production equipment enhancement through continuous improvement projects

Maintain a matrix of key equipment platform capability and constraints (Equipment Maturity Index, EMI & Tool of Records, TOR) on current and new equipment platform

• Driving EMI, a system to standardize equipment maturity expectations, metrics to communicate tool manufacturing readiness, analyze the requirements to advance tool maturity level
• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Equipment System Readiness, Enablement & Enhancement

• Conduct equipment characterization, identify and enable the critical equipment parameter monitoring system
• Working with PCS, IT & Automation team to enable tool control system such as FDC (fault detection & classification), E3 (enterprise equipment engineering), APC (advanced process control), tool alarm system, IOT, ECM (equipment constant management), R2R (run to run) and other equipment control system whichever applicable
• Equipment automation solution enablement for both system datamation (tool- micron host communication) and factory AMHS readiness and deployment from equipment perspective follow by working with IT & automation team to delivery full automation solution for production running support

Supplier Management & Engagement Program

• Working on several engagement forum from ERM (executive review meeting), TRM (technical review meeting), QBR (quarterly business review) to CIP review to strategize and ensure supplier understand and focus on identified priorities by business value ensuring focus on the greatest benefit
• Manage all the key and critical engagement activities between Micron and supplier to prioritize and enable quality and tool performance improvement
• Collaborate with supplier on technology and path finding focus, engineering improvement, manufacturing efficiency focus which focus on roadmap development/ solution and H2H partnership with competitive landscape strategies

Job Requirements/ Qualifications:

• PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• Basic knowledge in semiconductor manufacturing assembly, wafer bumping packaging technologies & advanced packaging techniques
• Minimum 3 years’ experience in related semiconductor industry or related manufacturing environment
• Experience with technical knowledge on assembly and/or wafer bumping and/ or advanced packaging technology
• Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
• Fast learner, with initiative and independence (min supervision), good team player, ability to integrate and cooperate with cross function teams and external vendors
• Strong communication (verbal & written) and presentation skills (English speaking is must)
• Understanding of business needs and customers’ requirement, able to participate in cross functional team environment
• Strong project management skills to ensure execution to timelines

Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements

• Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Engage in active participation in Package Development Engineering activities
• Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need
• Create decision matrix for equipment and material selection

Evaluate and qualify new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create and owner of purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional teams
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives
• Feedback loop for Continuous Improvement after mass volume production via collaborate with production and HVM team on existing production equipment enhancement through continuous improvement projects

Maintain a matrix of key equipment platform capability and constraints (Equipment Maturity Index, EMI & Tool of Records, TOR) on current and new equipment platform

• Driving EMI, a system to standardize equipment maturity expectations, metrics to communicate tool manufacturing readiness, analyze the requirements to advance tool maturity level
• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Equipment System Readiness, Enablement & Enhancement

• Conduct equipment characterization, identify and enable the critical equipment parameter monitoring system
• Working with PCS, IT & Automation team to enable tool control system such as FDC (fault detection & classification), E3 (enterprise equipment engineering), APC (advanced process control), tool alarm system, IOT, ECM (equipment constant management), R2R (run to run) and other equipment control system whichever applicable
• Equipment automation solution enablement for both system datamation (tool- micron host communication) and factory AMHS readiness and deployment from equipment perspective follow by working with IT & automation team to delivery full automation solution for production running support

Supplier Management & Engagement Program

• Working on several engagement forum from ERM (executive review meeting), TRM (technical review meeting), QBR (quarterly business review) to CIP review to strategize and ensure supplier understand and focus on identified priorities by business value ensuring focus on the greatest benefit
• Manage all the key and critical engagement activities between Micron and supplier to prioritize and enable quality and tool performance improvement
• Collaborate with supplier on technology and path finding focus, engineering improvement, manufacturing efficiency focus which focus on roadmap development/ solution and H2H partnership with competitive landscape strategies

Job Requirements/ Qualifications:

• PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• Basic knowledge in semiconductor manufacturing assembly, wafer bumping packaging technologies & advanced packaging techniques
• Minimum 3 years’ experience in related semiconductor industry or related manufacturing environment
• Experience with technical knowledge on assembly and/or wafer bumping and/ or advanced packaging technology
• Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
• Fast learner, with initiative and independence (min supervision), good team player, ability to integrate and cooperate with cross function teams and external vendors
• Strong communication (verbal & written) and presentation skills (English speaking is must)
• Understanding of business needs and customers’ requirement, able to participate in cross functional team environment
• Strong project management skills to ensure execution to timelines