Responsibilities:

· Project management involving Sanitary, Plumbing & Gas Services

· Documentation of method statement and work procedures

· Review and monitor site construction activities programme to ensure work completion as scheduled

· Evaluation, Cost estimation & analysis for Sanitary, Plumbing & Gas Services

· Preparation of design construction drawings

· Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers

· Attend site meetings and inspections.

Requirements

· Degree / Diploma in Mechanical or related discipline

· Knowledge of tender costing with experience in evaluation and cost estimation for Sanitary, Plumbing & Gas Services will be an added advantage

· 3 years working experiences in similar position with relevant design and installation knowledge preferred but fresh graduate may apply

· Excellent interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

Your tasks:

• Requirements engineering for automation solutions used in the manufacturing industry together with the customer.
• Technical assessment of the existing environment at the customer, including tests of the interfaces of production machines and systems that shall be integrated.
• Design of the solution together with the product managers and solution specialists in Germany.
• Development, and improvement / expansion of software to automate the manufacturing industry within an international team.
• Test and roll out of the solution on the customer’s systems.
• Training of key users from the customer’s IT and production department.
• 2nd level support and rapid problem solving to ensure smooth production without disruption to our customers.

Your profile:

You like to work in an international team and do your tasks in a self-responsible and conscientious manner. You will be working in an environment similar to a start-up. Your responsibilities will touch all phases in the Software Development Life Cycle.

A relevant professional experience completes your profile:

• Degree/Diploma in CS/EE/CE or equivalent, at least 3 years of relevant experience in either manufacturing automation or equipment integration for semiconductor manufacturing.
• Experienced in requirements engineering.
• Knowledge of production-relevant concepts such as MES, APC / SPC, AMHS, dispatching, scheduling, etc.
• Experience in MES systems such as SiView, Siemens Opcenter, Critical Manufacturing, WorkStream, Stationworks, SAP ME, FAB300, Promis would be advantaged.
• Familiarity with standard interfaces of the manufacturing industry (SECS/GEM, OPC, MOM, SOA).
• Understanding for software architecture and infrastructure.
• Skills in object-oriented programming (Java, TypeScript, C#, C++, .NET).
• Experience in database design and SQL development.
• Good knowledge of spoken and written English and Mandarin.
• Willingness to travel occasionally to customers and other SYSTEMA locations.

Location: Tanjong Pagar
Employment Type: Full-time

Salary: Up to S$3,500

Job Overview:

• Provide technical support for internal staff and occasionally for clients. Responsible for troubleshooting, managing IT equipment, and handling onboarding processes. Ensure smooth IT operations within the agency and at client sites as needed.

Key Responsibilities:

• Troubleshoot and resolve hardware, software, and network issues.
• Set up accounts and IT equipment for new hires (onboarding).
• Install, configure, and maintain desktops, laptops, and mobile devices.
• Manage IT inventory and coordinate repairs with vendors.
• Provide on-site support for clients as needed.
• Ensure software updates, system patches, and security protocols are implemented.
• Document support requests and maintain user guides.

Requirements:

• Diploma/Degree in IT or related field.
• 2+ years of experience in desktop support or IT helpdesk.
• Proficient in Windows/macOS environments, Active Directory, and Office 365.
• Strong communication and problem-solving skills.
• Willingness to travel for on-site support when required.

Job Description

• Industry/Organization Type: Design & Manufacture of Material Handling Systems
• Position Title: Sales Engineer
• Working Location: Gul Circle (Transportation provided)
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $5,000 + HP Allowance + Incentive
• Duration: Permanent

Key Responsibilities

• Conduct customer visits, managing the full sales cycle from prospecting through to follow-up, utilizing sales leads, cold calls, etc.
• Develop and refine sales strategies for targeted customers to drive revenue growth and increase market share.
• Foster and maintain robust business relationships with both new and current clients, ensuring prospective and ongoing satisfaction with products and services offered.
• Deliver exceptional levels of customer service, ensuring clients' needs and expectations are met or exceeded.
• Provide comprehensive technical presentations and product demonstrations that clearly articulate the features, advantages, and benefits of our products.

APPLY NOW!!!

• Minimum Diploma in Mechanical Engineering or with at least 2 years of relevant experience.
• Experience in equipment sales or related field would be advantageous.
• Candidates without experience are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66217 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

This will be a 1 year contract position based in Jurong West.

Responsibilities

• Designing schematic of digital, mix signal and power electronics.
• Designing embedded systems (A/D, D/A, high speed Microcontrollers, Digital Signal Processors (DSP), FPGA, I/O communications (CAN, SPI, I2C, RS485, RS232, Ethernet, and others.), volatile and non-volatile memory).
• Designing products to meet EMC compliance certification and safety requirements.
• Establish design rules and layout guidelines (schematics capture, printed circuit board layout design documents).
• Recognize, diagnose and troubleshoot issues, understanding of typical failure in digital/mixed signal circuits.
• Pinpoint potential risks and provide appropriate mitigations and evaluate requirements on performance, quality, time, and/or cost.

Requirements

• Degree holder in Electronics / Electrical engineering or similar.
• 3 years of successful product development experience.
• 3+ years of C/C++ programming experience.
• Experienced in developing requirements, verification and validation plans and risk analysis.
• Able to use hardware lab equipment.
• Knowledge of microcontroller and microprocessor’s basic architecture, embedded drivers development and constraints on application development.
• Multi-tasker who can operate efficiently in a fast-paced product development environment with multiple projects at various stages of completion.
• Able to provide technical leadership
• Able to communicate well with various stakeholders.

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1988580 Jacky Chong

Tecson Engineering has been serving Singapore's rail and marine sector as a sub contractor with humility since 1986. Specialising in Rail Engineering, Maintenance, and Repair works, our dedication to excellence is unwavering. With a focus on collaboration and integrity, we tailor our solutions to meet your specific needs. Our experienced team is committed to delivering high-quality service that exceeds expectations.

Postion : Testing and Comissioning Engineer

Duration: Min. 1 year (with possible extension)

Venue: Multiple Locations within Singapore (Depots, Site office, Main Office) - Depending on projects.

Job Description

Detailed Main Tasks & Responsibilities:

• Support software verification and validation processes.
• Participate in onsite activities including system installation, system configuration, and pre-on-site test activities.
• Lead assigned dedicated work scope of Test and Commissioning (T&C).
• Participate and coordinate on-site test and commissioning activities with customers as witnesses.
• Conduct all required test procedures, methodologies, and equipment testing activities related to the project to obtain sign-off from the customer.
• Prepare technical proposals (testing and commissioning) for submission to regulatory authorities.
• Arrange all test equipment required for testing in coordination with the site manager and team leader.
• Mobilize required test equipment and ensure readiness for testing.
• Coordinate and liaise with customers on the application of Permit-To-Work for testing activities.
• Document and communicate procedures, configurations, and standards effectively.
• Prepare and compile test reports for submission to customers.
• Prepare and draft Method Statement Risk Assessment.
• Supervise and monitor site test activities for each specific T&C work.
• Provide support to team leaders and site engineers for all safety-related requirements.
• Develop test plans and test procedures for Site Acceptance Tests (SAT), Interface Tests (IFT), and System Integration Tests (SIT).
• Plan scheduling and job allocation for activities in coordination with the planner.
• Participate in technical discussions and report preparation.
• Organize training programs.
• Maintain and ensure the site is clear and tidy after each deployment.
• Troubleshoot and create tools to resolve incidents.
• Strive to improve the stability, security, efficiency, and availability of systems by applying software engineering practices and implementing application monitors and alerts.
• Be proactive in helping the team in any other areas within the scope of the software development life cycle.
• Handle ad hoc work, including administrative support, special projects, and on-site assistance, requiring flexibility and quick task adaptation.

Requirements:

• Minimum Diploma or Degree in Electrical Engineering, Electronics Engineering, or Mechanical Engineering.
• At least 2 years of relevant working experience in a railway environment.
• Proficiency in Linux operating system internals and network concepts.
• Experience developing tools using scripting languages such as Python.
• Ability to learn new technologies in complex operational control systems.
• Systematic problem-solving approach, coupled with effective communication skills and a sense of drive.
• Able to understand the regulation and requirements of local electrical practices and regulatory requirements.
• Computer literacy.
• Ability to prepare test procedures and relevant technical documents.
• Ability to learn and perform cut-in/cut-out of circuits for new systems or reroute cables/systems requiring T&C.
• Willingness to work night shifts, weekends, and on-call duty.
• Positive work attitude with initiative.
• Team player.

Interested Applicants, please email your resume to us at [email protected].

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• Possess a recognized degree in Mechanical/Electrical Engineering with at least five years of relevant experience in building projects.
• Provide technical and engineering support to the Project Team.
• Assist the Project Manager/ M&E Manager in the effective planning, reviewing, monitoring and controlling progress and process of M&E works. He/she must be able to control and manage the M&E subcontractor’s progress and performance on site.
• Good knowledge of applicable codes/regulations and Authorities’ requirements relating to M&E services, building construction and safety.
• Coordination and production of individual and combined M&E drawings (CSD).
• Appraisal for works/ products compliance to specifications/ requirements and selection recommendations.
• Control the progress of RFA, RFI, shop drawings, technical submissions and equipment/material procurement/fabrication/delivery status.
• Develop work programmes and details for testing & commissioning factory tests, individual system test, integrated system test and statutory inspections.
• Able to plan, lead, delegate jobs, instruct, and monitor progress and performance of subordinates and M&E subcontractors’ site staff to achieve quality works, and smooth and timely completion of projects.
• Carry out M&E technical and site meetings and resolve technical issues with project consultants and subcontractors, including taking notes of meetings.
• Provide the project team with safe and economical methodology, and ensure projects meet the required quality standards.
• Conduct QA/QC inspections, manage RE, RTO and ensure clearing QA/QC inspections to meet the required quality standards and within the construction schedules.
• Provide, update and maintain all site inspection, testing and commissioning records.
• Assessment and cost verification of variation orders and make necessary recommendation of VOs.
• Check, evaluate and confirm work done and material supply status by M&E sub-contractor/NSC vendors for progress payments.
• Submission of as-built drawings and O&M manuals.
• Collaborate and liaise closely with Developers, Project Managers, Architects, Engineers, Subcontractors, relevant authorities and project teams to resolve technical and compliance issues in order to achieve a smooth and on-time completion of the projects.

The candidate will be responsible for the management and maintenance of M&E facilities in a Grade A commercial building. You will oversee functions and activities of day-to-day M&E systems and suggest improvement maintenance plans, you will also be involved in developing, implementing, reviewing and maintaining the maintenance regime and process review. In addition, you are required to oversee the works carried out by the contractors and ensure minimal disruption to the building operation.

Roles and Responsibilities:

• Support in the facilities management services, which include M&E support of the building
• Assist in the supervision of contractors in planning, coordination and execution of corrective, preventive maintenance, integrated system tests and annual building shutdown activities
• Assist in the preparation of regular reports for internal and external customers
• Assist in cost management and price negotiation with the vendors
• Support in other Ad-hoc project

Requirements:

• Diploma in Mechanical/Electrical or Facilities Management or its equivalent
• Certified Senior Fire Safety Manager will be considered a priority
• Relevant experience in Facility Building Maintenance services, ACMV equipment/chillers
• Knowledge in BMS or M&E infrastructure will be an advantage
• Excellent interpersonal and communication skills
• Fresh graduates are welcome to apply
• Shift work required (3 rotating shifts: Morning, Afternoon and Night)
• Only Singaporeans may apply

We are seeking highly skilled Commissioning, Qualification, and Validation (CQV) Engineers to provide risk-based CQV services for pharmaceutical and biopharmaceutical clients. This role offers opportunities to work across various areas, including process equipment, CIP/SIP (Clean-In-Place/Sterilize-In-Place), and process manufacturing systems, with a focus on maintaining compliance with regulatory standards.

Key Focus Areas:

1. CQV for Facilities, HVAC, and Equipment
2. CQV for Cleaning Validation

Responsibilities:

• Develop risk assessments, system impact assessments, protocols, and reports to support qualification and validation requirements, in line with regulatory standards and industry best practices.
• Create validation protocols using a science and risk-based approach to ensure compliance with regulatory requirements.
• Review, analyze, interpret, and summarize system and process performance data from executed activities for reporting and presentations to management.
• Investigate deviations, prepare detailed investigation reports, and create summary reports to ensure clear documentation of issues and their resolutions.
• Apply good judgment within defined practices and policies to select appropriate methods and techniques for obtaining solutions.
• Author or support the creation of test scripts for commissioning and qualification (CQ) of facilities, HVAC systems, manufacturing or analytical equipment.
• Conduct cleaning validation studies to ensure processes meet stringent regulatory requirements.
• Author or execute test scripts for DeltaV batch recipe testing, ensuring seamless integration with production processes.
• Draft DeltaV batch recipes, ensuring alignment with manufacturing specifications and process requirements.

Requirements:

• Experience with pharmaceutical and biopharmaceutical processes, including commissioning, qualification, and validation.
• Knowledge of DeltaV batch processes and recipe creation/testing is highly desirable.
• Proven expertise in facilities, HVAC, equipment, or cleaning validation is required for the respective roles.
• Strong analytical and problem-solving skills with a good understanding of industry regulations and standards.
• Experience with risk-based validation approaches and developing protocols in compliance with regulatory requirements.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

► Semiconductor and Electronics industry.

► Work Location: Ang Mo Kio

► Working hours: 8.30am to 5.30pm, Monday to Fridays

► AWS + VB

Our Client is a well-established company in Singapore to serve the semiconductor and electronics industries both local and globally.

Responsibilities:

• Conduct equipment design and development in accordance with customer requirements and internal specifications.
• Serve as the project lead, planning, organizing, and coordinating project meetings to review designs and ensure timelines are met.
• Maintain and manage documentation related to R&D activities, adhering to required standards.
• Track and ensure the Bill of Materials (BOM) is accurate and up to date.
• Create detailed 2D and 3D technical drawings.
• Initiate Engineering Change Notices (ECN) for design and drawing updates, and oversee the approval process and ECN workflow.
• Provide technical support for process and production teams, supply chain, and QA, including reviewing and troubleshooting designs and drawings.

Requirements:

• A Bachelor’s or Master’s degree in Mechanical Engineering or a related discipline.
• A minimum of 4 years of relevant experience in semiconductor or automation equipment design.
• Proficiency in Microsoft Office applications, including Word, Excel, and PowerPoint.
• A strong understanding of mechanical engineering principles and techniques.
• Extensive experience in mechanical design using SolidWorks is preferred. Experience with Autodesk/AutoCAD software will be an added advantage.
• Comprehensive knowledge and experience in material properties.
• Willingness to travel for overseas projects as required.x

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

Kindly send your resume in MS Word format to:

[email protected]

We regret only shortlisted candidates will be notified.
By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

Responsibilities:

• Confirm compliance with IMO, classification society (ClassNK) and inspections stipulated by the Japanese government (JG) and comply with technical standards.
• Manage budgets and procure and manage materials and equipment appropriately.
• Safe work planning by setting workplace safety rules and engaging in safety training.
• Thorough control and rapid response in spare parts stock management, repairs, and maintenance.
• To formulate plans, check progress and control quality accurately.
• Facilitate coordination with relevant parties (shipyards, classification society, manufacturers, etc.) to ensure smooth operations. Identifying and resolving problems in the field and proposing improvements to increase efficiency and quality.
• Prepare progress reports and report them to head office.

Requirements:

• Minimum 4 years of experience operating and maintaining working vessels in the owner's capacity.
• Degree in Electrical and or Electronic Engineering
• Experience in working at civil construction sites such as Jetty construction, Dredging, Ground improvement
• Experience in dredging and planning electrical equipment.
• Experience in Dredger salvage operation.
• Experience in dredging works using Grab dredgers.Good knowledge of Electrical circuit diagrams such as Electrical wiring for the assembly-type dredger.
• Good knowledge of Programmable Logic Controllers and programming such as PLC ladder, function block etc.
• Sufficient skills and experience are required in ship-related operations, as well as operational efficiency and troubleshooting skills.
• Well-versed in ship maintenance requirements.
• Positive working attitude and ability to work in a fast-paced environment.
• Positive troubleshooting/finding root cause with the ship's crew on board.
• Positive personality, always willing to communicate and cooperate with shipyard personnel and ship's crew, and able to identify root causes and suggest appropriate countermeasures in resolving problems.

Job Responsibilities

• Perform engineering design, calculations and analysis.
• Check and review purchase specification.
• Review and correct drawings.
• Prepare test procedures.
• Review vendor quotations and vendor drawings.
• Handle contract-bidding engineering specifications and enquiry.
• Monitor the progress of drawings, documents and purchase specification.
• Perform quality assurance check of drawings.
• Seek innovative ideas / solutions to improve current designs, work methods and procedures.
• Liaise with Production Department to resolve site problems.
• Liaise with Project Management Department to ensure on-time delivery of project.
• Liaise with Marketing Department on engineering specifications for project bidding.
• Liaise with customer, vendors and regulatory bodies on engineering design matters.

Requirements

• At least 5 years of relevant working experience, preferably in marine / offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels or platforms
• In-depth knowledge and experience of his engineering field
• Well versed with regulatory and class requirements
• Possess effective communication and people skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (eg Autocad or SmartMarine 3D)
• Fresh graduates are welcome to apply

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

Admiralty Road West, Singapore 759956

(Transport provided from Sembawang MRT)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities

• Smart Positioning/Localization: Research and Development of algorithms and signal processing for smart and seamless indoor positioning/localization systems
• Smart Communication: R&D of algorithms and signal processing for smart and ubiquitous wireless systems, including but not limited to WiFi, Bluetooth, UWB, mmW or NFC.
• Complete algorithm design and simulation verification for next generation products with multinational team.

Requirements

• Bachelor/Master/PhD in EEE/Signal Processing/Computer
• Smart Positioning/Localization: Good knowledge or relevant working experiences on indoor positioning (UWB/WiFi/Bluetooth etc.) technologies
• Smart Communication: Good knowledge or relevant working experiences on wireless communication technologies (OFDM/MIMO/MODEM/CODEC etc.)
• Strong digital signal processing or algorithm design background
• Proficient in C/C++/Matlab/Python programming
• Exposure to IC design or wireless technology standardization is a plus
• Pro-active, good communication skills and willingness to work with a multinational team

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

• Design/design management/coordination of infrastructure projects related to underground structures, deep excavations, and or civil works.
• Ensure engineering deliverables meet client expectations and the basis of design.
• Liaise with Senior Engineers, QP and local authorities.
• Degree in Civil Engineering.
• Minimum 3 years of design/design management/design coordination experience.
• Interdisciplinary coordination experience will be an added advantage.
• Fast learner with high aspiration for professional growth.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

• West Singapore
• 5 days work week
• Basic up to $4k
• AWS

Key Responsibilities:

• Facility Maintenance: Oversee and perform preventive and corrective maintenance of building systems, including HVAC, electrical, plumbing, and fire safety.
• Operational Efficiency: Ensure facilities operate efficiently by identifying and implementing improvement initiatives.
• Compliance & Safety: Ensure all facilities comply with health, safety, and environmental regulations.
• Vendor Management: Coordinate with contractors and service providers for repairs, installations, and maintenance activities.
• Project Management: Manage facility upgrade or renovation projects, ensuring timelines and budgets are adhered to.
• Documentation: Maintain accurate records of maintenance activities, inspections, and equipment servicing.
• Emergency Response: Address facility-related emergencies promptly and effectively to minimize disruption.

Requirements:

• Diploma / degree in Facilities Management, Engineering, or a related field.
• Proven experience in facilities management or engineering, preferably across multiple types of facilities.
• Strong knowledge of building systems and maintenance best practices.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Responsibilities:

• Plan, develop and execute test plans and test cases for desktop and web-based applications.
• Perform manual and automated testing using tools like Selenium, Bash scripting and Python
• Identify, document, and track bugs using bug tracking tools such as JIRA
• Collaborate with developers, product managers, and other stakeholders to ensure high-quality software releases.
• Conduct performance testing using tools like JMeter.
• Perform API testing using tools like Postman.
• Create and maintain test automation frameworks and scripts.

Requirements:

• Previous leadership experience in planning and proposing QA test activities to stakeholders.
• Proficiency in Python scripting, bash scripting and C++ would be beneficial.
• Strong understanding of manual testing methodologies and processes.
• Experience with automation testing tools (e.g., Selenium).
• Familiarity with version control systems (e.g., Git, SVN).
• Knowledge of Windows and Linux environments.
• Excellent analytical thinking and attention to detail.
• Strong verbal and written communication skills.
• Ability to troubleshoot and resolve issues efficiently.
• Experience working in agile teams.
• Familiar with test methodologies, including functional and non-functional testing, regression testing, smoke testing, sanity testing, end-to-end testing, integration testing, and installation testing

Job Description:

• Control and manage resources including labour and machinery on site.
• Conduct regular inspections and assess the work performance done by subcontractors.
• Monitor and manage work progress of subcontractors.
• Manage and resolve technical issues.
• Assist in planning and sequencing of the construction operations according to the Project Quality Plan.
• Attend meeting with consultant.

Job Requirements:

• Recognized Degree in Civil Engineering.
• HDB experience preferred.
• Min 5 years of relevant working experience.
• Good computer literacy.
• Self-motivated and able to work independently.

Job Responsibilities:

• Business development involves investigating opportunities in both domestic and foreign markets and developing business plans for the client's product line.
• Accountable for optimising a high level of profit margin and meeting the set ales target.
• Make a monthly or yearly sales plan, a sales forecast, and sales pitches for your customers.
• Ensuring the department keeps up its tight adherence to the ISO management system.
• Expansion of the business and its sales teams via the sharing of specific expertise and abilities through required mentoring and training.
• Growth of the company and its sales teams through the exchange of specialised knowledge and skills through necessary coaching and training.
• Make sales calls and develop new customers by employing strategies to increase market shares in the industries of petrochemical, marine, offshore, power generation, oil and gas, and industry.
• To achieve business goals and sales performance targets, develop and implement all strategic sales programmes.
• Establish connections with engine and machinery suppliers, principals, and OEM manufacturers.
• Keep abreast on industry news and trends, rival products and services, relevant information about emerging, established, and legacy technologies, and the most recent product line improvements.
• Respect the company's environmental, health, and safety rules and give top priority to one's own and one's co workers' health and safety.
• Any additional duties that are delegated by management or a higher.

Requirements:

• At least Degree/ Diploma in Engineering or Business.
• At least 2 years working experience in dealing with Spare Parts pertaining to Engine for Marine, Offshore or Oil & Gas Industry

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• To supervise and ensure works are in accordance to the contract drawings and specifications.
• Ensure site safety and proper execution of site work procedure on site
• Plan the sequences of the construction operations following the Project Quality Plan.

Requirements

• Minimum 5 years Local Experience in Construction Industry
• Degree in Civil Engineering or Construction related field;
• Able to work independently, a strong team player and to handle fast paced projects.
• Good interpersonal, written and verbal communication skills for collaboration with stakeholders across all levels.
• Independent, diligent and highly motivated with excellent team spirit

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Job Scope:

To independently handle sustainability deliverables, manage various scope of works defined by corporate or project team effectively and efficiently according to the specified technical requirements, timelines and budget. Assist lead engineer or manager in research and development task and resolve any arising issues during sustainability implementations.

Responsibilities:

• Coordinates with different disciplines to collect the Lessons Learnt and Life Cycle value improvement ideas, to sort out into different categories and to update/improve design standards.
• Proposes, conducts, and participates studies of new technology related to Company business, such as CO2 emission calculation and reduction, decarbonatization, Ammonia and so on.
• Assists his/her seniors in strategy planning for new products of the business, i.e., offshore wind farm, H2 energy, Ammonia energy, carbon capture system (CCS) and so on.
• Coordinates the specialists from Core Team (Technical expert group) to solve the critical issues arising from EPC projects or offshore fleets.
• With sufficient experience accumulated, may assumes role of R&D lead of the assigned initiatives, and monitor the progress for research topics from both company entities and external collaborators (universities, research institutes and consultants etc.).
• Independently communicates with all stakeholders, i.e., consultant, classification body, clients, internal engineering disciplines and implements the sustainability program as required by client specification or classification notation (ABS SUSTAIN and DNV ABATE etc.).
• Provides technical advice pertaining sustainability related topic during project bidding / FEED, EPCI and operational stage.

Requirements:

• Bachelor’s Degree in Civil/Structural/Mechanical/Ship Building/Environmental/Chemical/Electrical Engineering/Computer Science etc. or above.
• Or a Diploma in Engineering with relevant years of working experience.
• Min 7 years of relevant working experience in engineering in oil and gas sector or shipyard industries for Bachelor’s Degree holder, Min 5-year relevant experience for Master’s Degree, or min 3-years relevant experience for PhD degree or 12 or more years of relevant working experience for diploma holders.
• Good at project coordination, or software development skills are preferable.

Interested applicants are welcome to submit your MS Word resume to:

[email protected]

EA Personnel: R1109773

EA Licence: 07C3676

Responsibilities:

• Monitor, optimize, and troubleshoot issues related to either fermentation/cell culture or protein purification processes and unit operations.
• Perform product quality impact assessments and support root cause assessments for process discrepancies and Quality investigations.
• Identify and implement corrective actions, preventative actions and continuous improvements for process and equipment.
• Create, review and revise cGMP documents such as batch records, SOPs, etc.
• Create change records.
• Perform gap and technical assessments for global standards and procedures (GSPs and SOPs).
• Serve as risk lead or subject matter expert in support of risk assessments and hazards analysis e.g. microbial control risk assessments.
• Develop technical training material and conduct technical training for production staff.
• Support the technology transfer of new products/processes e.g. perform field testing.
• Create, review, revise and approve technical reports and engineering documents such as URS, FS, SDS, P&IDs, etc.
• Design, procure, commission, and qualify new equipment.
• Work effectively as part of a team responsible for ensuring successful and efficient processes for the production of recombinant proteins.
• Serve as subject matter expert for regulatory inspections as well as internal audits and support inspection response.
• Serve as RSTO representative in global network teams such as UOTs and task forces.
• Experience in Downstream operations for Drug Substance Manufacturing Operations will be an advantage
• Collaborate with multidisciplinary teams to achieve project objectives.
• Assist in experimental design and troubleshooting as needed.

About You:

• Min. 5 years of experience
• Bachelor's degree in a relevant life science field (e.g., biology, biotechnology, biochemistry).
• Previous experience in a GMP environment is preferred.
• Strong attention to detail, organizational skills, and the ability to work independently or in a team.
• Excellent communication skills, both written and verbal, in English.
• Adherence to safety protocols and regulatory compliance.

Duration: 06 months. Option to extend depending on business needs.

Job Description

● Develop/Support validation activities such as qualification test protocol or documentation

updates.

● Provide Technical expertise with respect to Emerson DeltaV or Rockwell Automation PLC/HMI system and software and in particular configuration in the company.

● Support software/hardware modification pertaining to the site Automation systems.

● Perform any modification/changes in terms of Hardware/Software in accordance with site GMP quality requirement.

● Support field troubleshooting with other internal Stakeholders.

● Interact with other departmental stakeholders like Quality, Engineering, Manufacturing as well as other staff within MSAT department on automation related enquiries.

● Support testing Factory Acceptance Tests (FAT), Commissioning and Qualification in accordance with site GMP quality requirement.

● Support other technical changes and duties such as On Call/Shift duty as required.

● Support Modbus/Devicenet/Profibus/Fieldbus and other types of devices communication protocol/devices in terms of troubleshooting/modification/addition. Support Variable

Frequency (VFD) commissioning/modification and validation.

Requirements:

● Knowledge/Proficient in Emerson DeltaV System and software OR Rockwell HMI System, software and PLC/HMI/VFD/Devicenet is a must.

● Knowledge of site GMP quality requirement will be a plus.

● Knowledge of Computer System Validation will be a plus.

● Pharmaceutical related experience preferred.

● Minimum 3 years’ experience in relevant technical experience or as per project requirement.

● Must be team player, self-starter, curious with strong analytical and organizational skills.

Duration : 2 years. Option to extend/convert subject to performance review.