Responsibilities:

Responsible for design, development, commissioning and maintenance of inhouse Ship Management System (SMS), which includes:

• Perform system and architecture design of Ship Management System (SMS).
• Perform system integration for SMS with third party systems.
• Perform, coordinate, manage and support of Factory Acceptance Test (FAT), Set to work (STW) and Harbour Acceptance Test (HAT).
• Perform software configuration management and technical documentation.
• Perform hardware / software maintenance and troubleshooting.
• Liaise with customers, project manager and other engineering trades.
• Ensure operationality and functionality of SMS during the maintenance period of the vessel life cycle.
• Maintain close working relationships with customer, subcontractors, and suppliers.

Knowledge and Skills:

• Knowledge in PLC programming and SCADA software.
• Knowledge in control & instrumentation, and control system design.
• Knowledge in computer administration, cybersecurity and networking concepts.
• Knowledge of standard Communication protocols like Modbus RTU/TCP, Profibus, RS422, RS485, NMEA, CANbus J1939.
• Knowledge in Python, JSON, Restful, Machine Learning and Data Analytics experience will be an advantage.
• Knowledge of international codes, Marine Classification/Statutory Rules and Regulations will be an advantage.
• Experience in Site Testing and commissioning will be an advantage.

Requirements:

• Degree in Engineering in Electrical / Electronics / Computer, those with other engineering experiences are also welcome.
• At least 5 years experiences with system architecture design, system maintenance, and/or IT/Networking
• Ability to work independently under pressure, as well as able to lead a small team
• Possess good communication skills to communicate with suppliers and customers at all levels
• Possess good analytical skills and good problem-solving & troubleshooting skills

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

Job Description

• Oversee in-house engineering design works of Fire Protection (Sprinkler, Hose Reel, Fire Hydrant, Dry Riser, etc) and Plumbing and Sanitary system, including detailed design, hydraulic calculation, shop drawings, pipe sizing, equipment selection, etc.
• Manage Fire Protection & Plumbing design coordination with other trades with BIM coordination.
• Liaise with Fire Protection & Plumbing suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for Fire Protection & Plumbing system to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based FP & Plumbing experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in FP & Plumbing calculations including pump sizing, hydraulic calculation, tank sizing and more.
• Experience of design and coordination skill.
• Familiar to fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Senior/Staff Software Engineer, Edge AI - Toolchain

Job Description

We are looking for Senior/Staff Software Engineers to grow our Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

This position works in a smaller team that specifies, develops and delivers the toolchain that allows our customers and partners to develop or port AI models to run optimally on our Neural Processing Units.

Responsibilities

• Specify and develop new toolchain features for existing and new NPU architectures, working with the inference engine sub-team
• Enhance, maintain and support existing toolchain features, and modify model network layers for NPU optimality, working with the application engineering teams and sometimes customers/partners.
• Constantly improve productivity through automation in all areas

Skills

• Strong Python class based product development skills based on knowledge of design patterns
• Strong understanding of all aspects of a compiler and related development and debugging technologies, code generation, program analysis, and pipeline optimizations
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc.
• Familiarity with the following is a plus:
• Deep Learning compilers like TVM
• Deep Learning framework - PyTorch
• Eclipse development for toolchain frontend
• CPU/DSP/GPU/NPU architectures

Requirements

1. Ph.D./MS/BS in Computer Science or Computer Engineering
2. At least 5 years of commercial development experience of which at least 3 are in compiler-related areas

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

Job Description:

• Preparation of construction schedule, monitoring of production and subcontractor's work progress.
• Able to handle with technical method statement.
• Resolving of technical matters and geotechnical issue.
• Submission of progress claims & variation order.
• Cost control measures & wastage control.
• Arrange work progress records.
• Preparation & submission of relevant documents to contractors.
• Able to attend to contractors' queries and comments.
• Attending of site progress meeting.
• Coordinate with Professional Engineer (PE) for PE Endorsement which includes test pile, trench stability, working platform, COS & etc.
• Prepare official letter to Main-contractor to record standby period, EOT claims, variation order, obstruction record
• Summarize diaphragm walls and bored pile panel record.

Requirements:

• Degree in Civil Engineering or relevant studies.
• Working experience in foundation works such as diaphragm walls and bored piles would be an advantage.
• Construction site working environment.
• Fresh Graduate are welcome to apply.

Our Engineers support internal and external manufacturing operations remain operational, continuously improve and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

WHAT YOU WILL DO

The Process Engineer either independently or with minimal support introduces new products to the site, provides technical expertise on the manufacture of assigned drug products on site and transfers drug products to other facilities. In collaboration with supporting functional groups, the Process Engineer provides technical guidance on deviations, investigations and customer complaints. The Process Engineer also develops and leads/participates in continuous process improvement activities to enhance site performance metrics.

• Leads simple new product introductions to the site by conducting process and equipment comparisons, new raw material introduction, development studies and clinical supplies manufacturing, cleaning processes development and validation and training of technicians as required.
• Designs and executes small/full-scale experiments using design of experiments methodology and/or simulations for new products to evaluate the impact of proposed changes to validated equipment/processes.
• Supports filing activities by developing and leading process qualification activities for equipment, process and material changes.
• Understands the principles of Quality by Design (QbD) and executes the requirements in support of a QbD filing
• Supports routine supply manufacture by providing on going technical support and reviews IPT metrics to identify and implement opportunities for improvement utilizing the lean six sigma tools.
• Proactively monitors the performance of equipment/module(s) or unit operation(s) during manufacturing and cleaning through the use of control charts. Performs statistical analysis of the data and responds to shifts and trends in performance appropriately by engaging various functional areas. The Sr. Engineer, PTO is the change owner for process Global Change Management (GCM) change controls.
• Develops continuous process verification (CPV) plans, analyses the data and authors the CPV reports and annual product reviews. Conducts periodic cleaning assessments as part of continuous process improvement.
• Executes complex equipment/process/automation changes as required for process improvements, including changes to process/cleaning batch sheets.
• Provides technical expertise related to equipment and manufacturing/cleaning processes in response to deviations to understand and eliminate the root cause(s).
• Leads investigations for emergency product complaints, investigations and deviations.
• Provides technical guidance in supports of site and divisional capital projects and new facility start-up activities, including full-scale process demonstration, process validation, and cleaning validation
• Demonstrates and promotes safety, health & environment (SHE) leadership behavior, ensuring that all activities are carried out in accordance with SHE requirements
• Any other duties as assigned by the Supervisor.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Bachelor or Masters Degree in a technical field, including Chemical/ Mechanical Engineering, or Pharmaceutical Sciences
• 0 to 3 years of technical experience in manufacturing industry preferred.
• Knowledge of problem-solving tools (such as fishbone analysis, 5 WHY, logic fault tree etc.) and troubleshooting skills
• Knowledge of data analysis (familiarity with use of statistical software such as Minitab or JMP is preferred)
• Good verbal communication skill and technical writing skill
• Attention to detail

This is an Advanced Professional Conversion Program under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Fresh graduates with relevant internship are welcome to apply
• PMETs/Mid-Careerist with no prior work experience in Biopharma industry are welcome to apply

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

Responsibilities:

• Assist BD Director in managing program related issues and correspondences
• Coordinate and work with tool and assembly equipment suppliers to ensure smooth program launches
• Design work flows and optimise production layout together with production department to improve machine efficiency
• Source and gather tooling and components quotation from supplier for initial project start up
• Work on new quotation and packaging requirement for new parts requirement
• Support production and quality departments to troubleshoot the processing & quality issues pertaining to plastic parts
• Monitor and track progresses on the program activities
• Provide customer support and response to customer enquiries on time
• Update all tooling activities and bill of materials and project review records
• Follow up and track on engineering changes for each tooling
• Coordinate all mold trials activities
• Design and work with supplier for jig and fixture required for secondary processes
• Prepare periodically tool-life report for customer
• Any other duties as and when assigned

Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/ Degree in Mechanical Engineering or equivalent
• 3-5 years relevant experience
• Good knowledge of project management & production process
• Good verbal and written communication in English
• Independent, good initiative and able to multitask in fast paced environment
• Experience in handling Healthcare product is an advantage

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Manage the development of Unmanned Ground Vehicles (UGVs) by researching and recommending ways to improve their performance, working with technical experts.
• Manage cross-functional team members and coordinate system integration, assembly, testing, and qualification of UGVs
• Conduct and coordinate structured testing of UGVs to validate system and subsystem performance.
• Work with external vendors and internal teams to align design requirements and ensure smooth collaboration.
• Support business development activities by synthesising requirements, defining specifications, plan, drive and track the solution process for the team.
• Ensure that all necessary documentation (designs, system requirements, production details) is organized for manufacturing and production.
• Conduct market research to understand new trends in robotics and unmanned systems technology.

Requirements:

• Degree in Mechatronics, Robotics, Electrical/Electronics, Mechanical Engineering, or similar fields.
• 2-3 years of working experience in project management or product development in fields of robotics or equivalent.
• Experience in systems design, system integration, and team management.
• Good communication and management skills to handle both internal and external stakeholders.
• Ability to handle multiple projects and meet deadlines.
• Knowledge of robotics and unmanned systems.
• Hands-on approach when needed, with the ability to collaborate in a dynamic team environment.
• Experience building and testing robotics/control systems would be advantageous.

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 8-12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

1. Design, build, and deploy back/front end software applications using C# and Typescript (or JS).
2. Employ LINQ for data interaction and process optimization.
3. Oversee Microsoft SQL databases, carry out SQL programming tasks, and enhance system performance.
4. Engage in all stages of the Software Development Life Cycle (SDLC), including requirement gathering, design, coding, testing, deployment, and maintenance.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers

Requirements:

• Bachelor’s Degree in Computer Science, Information Technology or Mechatronics or equivalent
• Demonstrable experience (at least 2 years) in software development.
• Profound knowledge of C#, LINQ, and Angular. Experience with Microsoft SQL database programming using Entity Framework & SignalR.
• Acquaintance with the Software Development Life Cycle (SDLC).
• Familiarity with OPC-UA and Industrial 4.0 technologies is advantageous.
• Exceptional problem-solving abilities and meticulous attention to detail.
• Excellent communication skills and a strong team player.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.