Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Job Description & Requirements

Candidate must possess at least Diploma/ Dgree in Engineering (Electrical)

• Preferable with 2 Year(s) of working experience in the related field is required for this position.
• Entry level candidates are welcome to apply.
• Preferably Junior Executive specialized in Engineering - Electrical or equivalent.
• 6 days work week.
• Good interpersonal and communication skills.
• Rotating shift

Responsibilities:

• Responsible for all works related to Project Engineer duties
• Able to prepare shop drawings, as built drawings of electrical services
• Able to visualize site condition and make necessary proposal
• Will need to assist in other department

• Assists the Project Manager in managing and supervising the execution of production works and ensuring the delivery of assigned projects
• Assists the Project Manager in planning and prioritising the order of works and work methodology
• Liaises with the project team to allocate adequate manpower and equipment resources
• Monitors work progress on board vessels and in workshops
• Conducts production meetings between Yard’s subcontractors, supervisor and ship’s staff to clarify work scope, co-ordinate sequence of work, update schedules and other contractual matters, as and when required
• Ensures works are carried out according to the job specifications in terms of quantity, quality and meeting Class/Owner requirements by developing test plans and arranging for inspection and survey for the Superintendents and Classification
• Completes the process of mechanical completion and commissioning scope of work
• Any other associated tasks and responsibilities assigned from time to time

Requirements:

• Bachelor's Degree in Marine Engineering, Shipbuilding, Naval Architecture, Mechanical Engineering or relevant apprenticeship training in a marine trade
• Knowledge of various workshops dealing with specialised works in the industry
• Able to perform scheduled night duties when required
• Attend to vessel’s needs during weekends and public holidays
• Travel within the country or abroad for ship check
• Good knowledge of marine industry skills in any discipline
• Knowledge in Hull,Mechanical, Piping & Electrical will be advantageous
• Good planning,organization, control, problem-solving, interpersonal and communication skills
• Good knowledge of project management software and other planning softwares

Our Address:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 15 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Descriptions:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist for tender team.
• Research on the application and construction technology of new materials.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Calculation and design optimization of offshore photovoltaic structures.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirements:

• Preferably with a Degree in Engineering or related studies.
• Tender experience is preferable.
• Minimum 6 years of design engineering experience.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Act as team player.

JOB DUTIES :

• Design precision plastic injection molds according to requirements.
• Construct design layout and mold design review meeting.
• Communicate with customers in conference calls and on-site design meeting.
• Perform other duties as assigned.
• Required to develop junior engineers.

EXPERIENCE REQUIRED:

• Minimum 7 years relevant working experience
• Minimum Diploma in precision/ mechanical/ manufacturing engineering.
• Proficient in Siemens NX software and Microsoft office applications
• Strong leadership skills. Has positive attitude towards work and eager to learn new skills

Job Description Summary

All activities relating to enhancing services technology integrating customer data, or capturing engines/products reliability, availability, maintenance, safety and other performance parameters. Includes hourly, nonexempt and exempt employees as well as manager roles responsible solely for these activities. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.

Roles and Responsibilities

• Development of repair and inspection technologies, process qualification, industrialization. Related program deliverables to repair facilities for new and updated processes.
• Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.
• In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.
• Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions.
• A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members

Required Qualifications

• Advanced experience in the Engineering/Technology & Repair Development. Knowledge level is comparable to a Bachelor's degree from an accredited university or college ( or a high school diploma with relevant experience).

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Position Overview

We are seeking a dedicated and detail-oriented Quality Assurance Specialist to assist our Quality Assurance Manager. The successful candidate will be responsible for performing a full spectrum of quality-related activities and developing/reviewing quality and inspection plans

Education / Certificates

Degree in Engineering, Science, or a related field.

Job Responsibilities

• Conduct First Article Inspection (FAI), Dedicated Product Release Verification, and material review.
• Develop and review quality and inspection plans.
• Manage quality-related activities with customers and internal staff, including handling customer rejects, product defects, and non-conforming materials.
• Perform product and system audits for both in-house and vendor operations.
• Participate in continual improvement initiatives.
• Perform other duties and responsibilities as assigned

Requirements

• Minimum of 2 years of experience in Quality Management.
• Knowledge of AS 9100 / ISO 9001 Quality Management System requirements.
• Proficiency in Geometric Dimensioning & Tolerancing.
• Experience with product inspection methods.
• Knowledge of Coordinate Measuring Machine (CMM) applications is an advantage.
• Strong understanding of Quality Statistical Tools and Methodologies such as Cpk, SPC, GR&R, and Six Sigma tools.
• Proficient in writing quality manuals and procedures.
• Ability to lead and/or perform Internal Audits.

Nitec, Diploma in IT/Computing or Bachelor Degree related certification and above

minimum 1-year working experience in IT

Looking for a long-term career in an IT environment

Must have a passion for IT technology

Preparation of IT documentation, reports, and IT administrative tasks

Good at conducting research

5.5 workday (Mon - Fri 9am to 6pm, Sat 9am - 1pm)

Weekend (Public Holiday Standby)

Short courses will be provided

* No experience or fresh Grad are welcome too.

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the PCB layout design of industrial electronic products.

Roles & Responsibilities

• Support hardware developers on board schematic capture fulfilling design requirements.
• Responsibility for PCB layout in Cadence Allegro.
• Manage the layout design review prior to design release.
• Prepare and release all PCB documentation, and ensure the project timeline is met.
• CAD library administration including symbol, footprint generation and database administration.
• Creation of components’ and PCBAs’ 3D models and liaising with Mechanical Design Engineers on design constraints.
• Liaise with PCB manufacturers to clarify design requirements and resolve problem encountered.
• Liaise with Process Engineers of the product factory to clarify design requirements and resolve problems encountered during PCB assemblies.

Qualifications & Competences

• Minimum Degree/ Diploma in Electrical/ Electronic Engineering with 5 years working experiences in PCB layout design
• Knowledge in Cadence Allegro, Altium or any other electronics design software
• Experience in high speed, mixed signal, power and RF board design would be an advantage
• Sound knowledge of IPC-2221
• Good interpersonal skills to work with team members
• Self-motivated and able to work independently and efficiently

What can we offer

• Exciting and diverse duties and responsibilities await you within a dynamic international company environment experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the mechanical design of industrial electronic products.

Roles & Responsibilities

• Responsible for planning, conceptualizing, and creating mechanical designs for electronics and power electronics products.
• Create and review technical drawings, plans, and specifications using Siemens NX.
• Collaborate with multi-disciplinary engineering teams to complete design for manufacturing (DFM) and design for assembly (DFA).
• Work with vendors and contractors efficiently to ensure timely completion of deliverables.
• Conduct thermal simulation and analysis using industrial software for development.
• Generate working prototypes for beta testing and customer demonstration, including 3D printing.
• Develop prototype testing processes, and perform testing and verification of new designs.
• Perform detailed documentation to track project development and design process.
• Manage BOM creation and maintenance within the PLM (Product Lifecycle Management) system.
• Ensure the project timeline is met and the project stays within budget.

Qualifications & Competences

• Bachelor's degree in mechanical engineering, or related technical discipline.
• Minimum of 5 years of relevant work experience.
• Sound knowledge of GD&T (Geometric dimensioning and tolerancing)
• Extensive experience using CAD software such as Siemens NX, Creo, or similar.
• Familiar with state-of-the-art 3D printing technology for prototyping purpose.
• Experience and knowledge of Industrial Design (ID) would be an advantage.
• Knowledge of FEA (Finite Element Analysis) would be an advantage.
• Knowledge and experience with special plastic molding techniques, especially overmolding or ultrasonic welding, would be an advantage.
• Ability to communicate effectively and clearly.
• Self-motivated and a great team player.

What can we offer:

• Exciting and diversified duties and responsibilities await you within a dynamic, international company environment that is experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

- Designing electrical system

- Ensure designs meet industry standards and regulations

- Knowledge of design techniques

- Prepare technical documentation and reports

- Responsible for producing schematic drawings

- Proficiency in electrical design software (e.g., AutoCAD, Solidwork)

- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.

- Assist and collaborate with other project team members to comply with project requirements and meet project schedules

Company Description

Working at Boskalis is about creating new horizons and sustainable solutions. In a world where population growth, an increase of global trade, demand for (new) energy and climate change are driving forces, we challenge you to make your mark in finding innovative and relevant solutions for complex infrastructural and marine projects.

Within a vibrant company culture, you will be working as part of a diverse, international team of experts. We offer you the opportunity to realize your full personal potential and expand your professional career by creating new horizons. Together!

Job Description

As a Salvage Engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to get the ship systems up and running again. You are responsible for the vessel maintenance, trouble shooting, and on-site repairs of our salvage equipment. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, reports to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager to set up the right maintenance procedures and carry out the planned maintenance system of our equipment.
• Sharing knowledge with other engineers about complex ship's systems and maintenance solutions.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities

To make your mark as a Salvage Engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• An experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Ability to handle heavy duty diesel machineries, hydraulic, pneumatic and basic electrical etc.
• Willingness to work on weekends and public holidays frequently.

Qualifications

What you can expect

• Career opportunities: We challenge you every day to get better. Together we realize your full personal and professional career by creating development opportunities.
• Warm welcome: We warmly welcome our new colleagues, so they feel at home as soon as possible. During your onboarding program, we give you all the ins and outs of Smit Salvage!

Extra information

• Your team: As a Salvage Engineer, you will work for SMIT Salvage Singapore. You will work for one of the largest salvage companies in the world. You are part of a team of 6 Salvage Engineers. You will also work with various other colleagues who are part of the Salvage team.
• Where you will work: You will work at our warehouse in Singapore (23 Gul Road) and at project locations onboard vessels worldwide.
• Procedure: You can easily apply by filling in the online application form and uploading your CV and cover letter. You will always receive an immediate confirmation of receipt by e-mail. It is not possible to apply by email, the contact form or by post. Depending on the position, we invite you for two or more job interviews. If you have successfully completed all steps, you will receive an offer from us and we would like to welcome you to Smit Salvage Singapore!

Additional information

We’ll be happy to answer your questions about the position of Assistant/Salvage Engineer. Please contact Arshad Asharaf, corporate recruiter via our careers page.

Interested? Please apply by filling in your details and by uploading your cover letter and CV on our careers site.

Disclaimer for recruitment and selection agencies

We appreciate your interest in our vacancies and understand that your candidate might be enthusiastic about this exciting opportunity. However, our recruitment process is not structured this way, at Boskalis we handle recruitment ourselves. Therefore, we do not accept unsolicited applications or CVs from recruitment agencies. Any submission will be treated as a direct application.

LI-AASH

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Interested candidates are to submit a detailed resume to speed up the application process.

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Meranti Power Pte Ltd, a fully owned subsidiary of Energy Market Authority, is currently in the final phase of power generating station development. and will thereafter, operate and maintain the power generating station. We are inviting applicants for the position of Senior Engineer, Electrical who shall report to the Head, Electrical. The scope and requirements are as follows:

RESPONSIBILITIES :

A. Current & future Project

• Ensure compliance to the prevailing Workplace Safety and Health Act and all relevant authorities’ regulations.
• Assist the Project Director and Head (Electrical) in all phases of Project Cycle related to all electrical systems and equipment including conceptual stage, drafting work scope for Owner’s Engineer consultant, system design and engineering stage, execution stage and right up to commissioning.
• Work with the Consultants for the timely completion and cost-effective implementation of the projects.
• Participate in the design review, implementation & commissioning of new power plants’ Electrical systems, including evaluation and recommendations for acceptance of the Consultants/Contractors’ Electrical systems engineering design and selection, procurement, and installation proposals for the power plant to ensure successful commissioning on time & within budget.
• Detect and provide prompt triggering of risks or potential risks to avoid/minimize delays or losses, recommend cost effective plans and monitor finances to ensure each phase of Electrical system works is started and completed on time and within the budget allotted.
• Attend meetings with various stakeholder to report on project progress against milestones and challenges faced
• Manage problems resolution processes with Head (Electrical) and consultants with respect to power plant project Electrical systems design, implementation, installation, and commissioning and resolve co-ordination/interfacing issues with other parties.
• Provide status updates to Head (Electrical) for report to MP’s Senior Management on progress of major Electrical systems project activity against the schedule, highlighting significant milestones and any issues/interfacing affecting or may affect project cost and schedule.
• Support Head (Electrical) to communicate, coordinate and collaborate with Contractor, external parties and agencies (SPPG, EMA/ PSO, JTC, etc) with regards to Meranti Power’s 400kV Switchhouse/ Substation, SPPG feeder connections, Gas Insulated Switchgears, Generator Step-up Transformer, Insulated Phase Bus Duct, etc. at different stages of the project (including Commissioning).

B. Operation & Maintenance Phase

• Be familiar with all regulations pertaining to the Electrical systems of the power station’s equipment, auxiliaries and common systems maintenance works and safety, e.g. Workplace, Safety & Health Act’s Regulations, including Risk Assessment and Mitigating Measures, Work Methods, Permit-to Work, Lock-Out-Tag-Out System in relation to maintenance of Electrical equipment in the power generation station.
• Prepare technical specifications for equipment electrical parts and work services when required. Work with Procurement to manage the procurement of Electrical parts and services.
• Coordinate all Electrical Maintenance programmes (Predictive, Preventive, Corrective) and liaising with relevant stakeholders to ensure safe and timely completion of works.
• Be familiar with Predictive Maintenance monitoring techniques.
• Familiar with use of Computerised Maintenance Management System (CMMS).
• Manage and optimize all planned plant/equipment electrical maintenance activities during minor and major overhauls and inspections
• Responsible for the functional tests and analyse the failures related to Electrical systems and components and recommends remedial/mitigation measures to prevent recurrence. Troubleshooting of faults/defects & carry out failure analysis to determine root cause.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Supervision of Electrical maintenance contract works and prepare work procedures and risk assessment for all Electrical maintenance activities
• Manage day-to-day activities of Electrical team effectively; may be appointed as Reporting Officer to technical officers.
• Support Head (Electrical) to engage and manage Licensed Electrical Worker (LEW), Qualified Persons (QP), Competent Persons (CP) to carry out the required services and works.
• Track the year-to-date expenditure against the approved department Electrical budget; Support Head (Electrical) to prepare upcoming budgets.
• Prepare Department’s Electrical monthly report
• Design, coordinate and conduct training on Electrical matters

C. Other tasks

• Perform administrative tasks for the benefit of the organization as instructed by Head (Electrical) or Senior management e.g. secretariat for meetings, staffing duties, presentations, etc.
• Take part in organisation-wide activities in various capacities such as organising committees for events,
• Attend training/ events/ conferences that is in line with the organisation objectives and proceed to share the learning points for organisation benefit

REQUIREMENTS :

• Degree in Electrical Engineering or equivalent.
• Major Project Management experience with at least 3 years in power plants development, implementation, commissioning tests, preferably including operation/electrical maintenance of large power plants, specifically employing Combined Cycle Technology.
• Conversant with international and local codes, standards and recommended practices for design and selection of electrical equipment related to the above plants will be an added advantage.
• Hands-on experience in power plant projects’ tender preparation including technical/functional and commissioning tests specifications for C&I equipment, tender evaluations, contract negotiations, contract administration and contract supervision.
• Experience in overseeing the power plants worksite’s adherence to Workplace Safety & Health, and relevant regulatory requirements.
• Will be required to work beyond office hours in event of plant exigency or emergency.
• Self-motivated, results focused and willing to work under tight schedules with multi-disciplinary teams.
• Able to lead a technical team and harness and direct the strengths of the different members to output greater effect than the sum of each individual. ·
• Willing to work in construction site office during construction stage and Jurong Island. (Morning transportation pick-up points available at different parts of Singapore.)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Addcel has been delivering deep value to clients across Semi-con, Pharmaceutical, Data Centers & Oil & Gas industries since 2010.

Specialising in Design & Build of process utility systems, prefabrication/ DFMA, facility & plant maintenance and construction implementation, we take pride and passion in all that we do.

The Process Engineer reports to the Tender Manager and is responsible for the below:

• Design and develop industrial processes to improve efficiency and safety.
• Perform calculations for flow rates, pump sizing, temperature, and pressure.
• Develop and review process design documents and specifications.
• Utilize process simulation software to model and optimize processes.
• Collaborate with cross-functional teams, including operations, maintenance, and project management.
• Provide technical support and troubleshooting for process-related issues.
• Ensure compliance with industry standards and regulations.
• Conduct risk assessments and implement safety measures.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Min. 3 - 5 years of relevant working experience, preferably in Semi-con, Data-centre, Pharma & Oil & Gas.
• Strong knowledge of process design principles and methodologies.
• Experience in the oil & gas, chemical, or manufacturing industries.
• Experience in extracting BOQ from layout and P&ID drawings for tender preparation.
• Experience in attending technical clarification meetings and presentation
• Familiarity with Distributed Control Systems (DCS) and instrumentation.
• Strong knowledge of process utilities design (Chilled Water, Steam, Process Cooling Water, and CDA systems).
• Proficient in pipe sizing, stress analysis, pump head, and hydraulic calculations.
• Familiarity with proposal costing and tendering processes in EPC projects.
• Strong communication skills with the ability to propose alternative technical solutions.
• Detail-oriented and proficient in Excel.
• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work effectively in a team environment.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Job Responsibilties

• Provide after-sales product and technical support - engaging with customers, clarification meetings, supporting 3rd party events.
• Design BMS system architecture, HVAC control system and optimization program tailored to each upgrading project requirement.
• Analyse existing BMS operation and HVAC performance to propose system renewal and control system improvement.
• Support project management team on existing building upgrades including testing and commissioning.
• Troubleshoot Yamatake and Azbil product problems for existing maintenance at job site.
• Track and analyse recurring faults or issues in BMS and other monitoring systems to identify patterns.
• Use trend date to provide insights on system vulnerabilities and potential areas for improvement.
• Perform various engineering calculation, equipment sizing and selection and procurement of equipment ensuring it meets safety standards and performance requirements.
• Supports the Sales on technical aspect to formulate Business Development plan for Building Automation Solutions in Singapore.
• Liaise with various departments in Headquarter in Japanese language to report the latest trends and requirements of Singapore Market
• Identifies industry trends, collects and assesses competitive and market intelligence.
• Regularly contact with Japanese and non- Japanese customers to exchange information.

Requirements

• Bachelor's degree in a technical discipline preferred;
• Minimum 4 years of experience in BMS and Automation industry
• Well versed in specification and selection of Yamatake and Azbil building automation system and product, not limited to system and controller but including field devices like sensors, control valves
• Strong communication presentation skills with the ability to present technical information to non-technical stakeholders.
• Proficiency in Japanese Language both verbal and written is a must

Education:

Diploma/Degree in Electrical Engineering, Computer Engineering, Computer Science

or with experience of at least 3 years and above
or both.

Programming Competency:

Competent in programming languages C++, C#, SQL database and .Net Framework 2.0 and above environment.

Competent in PLC and inverter systems preferred

Other Requirements

Only S’pore citizens/PRs need to apply.

Able to lead a small team in projects.

Need to communicate with project/site managers regarding project requirements.

Proficiency in English essential as submission of site reports is required.

Preferred

Competent in PLC and inverter systems preferred

Knowledge and experience in port and warehouse cranes, preferred.

Able to use Autodesk electrical CAD with hands on electrical experience, preferred.

Candidates with class 3 driving license are preferred.

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

Unlock your potential with us! Join us as a Technical Sales Engineer who will be involved primarily in high temperature and corrosion resistant (nickel alloy) materials supporting the petrochemical, aviation, waste to energy, pharmaceutical sector. Your positivity and energy will thrive in this new, rewarding opportunity.

Responsibilities

• Work with well-established customers base in the petrochemical | pharmaceutical | aviation, and OEM industries in Singapore
• Interpret customer requirements
• Understand industry standards and specifications
• Read customer drawings and generate bill of materials
• Formulate sales proposals and negotiate directly with end users to close orders
• Negotiate procurement of materials, parts, sub-contract services and logistics

Requirements

• Degree or Diploma in an engineering discipline
• Working knowledge of industrial piping and related hardware
• Reward driven with a real desire to improve sales and business margins
• Proficient with MS Excel

Advantages

The following optional skills or work experience would be an advantage

• Familiarity with ASME | DIN | JIS and similar material specifications
• Previous experience in a plant or on-site maintenance or engineering role

Additional Information

*The position will be in an office based working environment. No outdoor sales required.

*Applicants without prior sales experience but with engineering background may be considered.

*Monthly Salary Range shown excludes commission component.

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.