Job Description:

• On behalf of the Owner’s Engineer (OE), the T&C Lead Engineer shall support the T&C Manager for overseeing all testing and commissioning activities of the IWMF Contractors, including the coordination of testing and commissioning activities of TWRP that interface with IWMF.
• The T&C Lead Engineer shall support the T&C Manager to lead the OE’s proposed testing and commissioning team and coordinate with its Resident Site Supervision (RSS) Team and OE’s design team as well as the Contractors to review the development of the Contractors testing and commissioning plan and the Contractors execution of their plan in order to achieve the Project milestones for each of the IWMF EPC Contracts (EPC Package 1 – Waste to Energy/Materials Recovery Facility and EPC Package 2 – Sludge Incineration Facility/Food Waste Treatment Facility).
• The T&C Lead Engineer shall support the T&C Manager to oversee the whole of each Contractors testing and commissioning activities, and the interfaces between EPC1 and EPC2 and TWRP as relevant, which should commence from dry/cold to hot commissioning to successful completion of entire commissioning process and trial run, including optimisation of plant operation with the Contractors and O&M teams.
• Participate as required by the T&C Manager in regular T&C Coordination Meetings with the Contractor and/or Other Contractors on adjacent sites (that is attended by Client representatives or similar others also)
• Any other matters that may from time to time be delegated by the T&C Manager.
• The OE’s T&C Lead Engineers are estimated to be mobilised to site at least 6 months prior to the commencement of actual testing and commissioning by the Contractor in order to familiarise themselves with the Works and the Contractors plans for the T&C and the expectations of the Client.

Job Requirements:

• The T&C Lead Engineers shall have at least 5 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.
• The T&C Lead Engineer to have a relevant engineering degree or certification.

Location: 11 Tuas Avenue 6, Singapore 639299
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Location: Tuas Avenue
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Project Sales Engineer

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the EICA project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability of specification capability for all I&C related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management in the I & C discipline for the WtE project
• Review the submittals from Contractors for Process Control like Waste Reception system, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Job Requirements:

• A relevant Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).
• At least 10 years of relevant experience in design and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will be considered as relevant.

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Responsibilities

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align electrical design drawings to ensure compliance with design specifications and guidelines
• Knowledge in M&E and able to identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the deadline
• Attend meeting with contractors to address issues and update progress
• Study and review drawings, specifications for compliance
• Allocate work and ensure jobs are correctly and properly achieved within standards and SOP
• Submit Variation Works costing, taking BQ and understand contract specifications

Requirements:

• Bachelor’s degree or Diploma in Electrical Engineering or related disciplines
• At least 5 to 8 years of relevant experience as QS
• Good knowledge of M&E specifications & requirements
• Able to take BQ, submit Variation Works, understand contract requirements
• Candidate with more than 8 years of relevant experience will be considered for Senior position

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

The incumbent will be responsible for identifying critical gaps, in the supplier process control, drive development of appropriate containment and closure with robust solutions at supplier sites. To develop solutions to verify implemented process controls, engage product engineering for clarification of specifications, partner with SDE to develop appropriate metrics, validate compliance to specifications etc.

Requirements:

• Detailed knowledge of Geometric Dimensioning & Tolerancing (GD&T), at least 1 year of related experience
• Knowledge of part dimension verification tools & techniques, and working experience with data visualization (MS Power BI, Tableau), data manipulation (SQL)

Interested candidates, please forward your most recent resume to [email protected]

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Key Responsibilities:

• Assist in evaluating manufacturing processes by supporting research programs, applying knowledge of product design and materials, and collaborating with operators and vendors.
• Help design and develop manufacturing processes for new products and enhancements, including related tooling and fixtures.
• Support process troubleshooting and refinements to improve product throughput and assembly techniques.
• Contribute to improving manufacturing efficiency by analyzing workflow, space requirements, and equipment layout.
• Participate in process qualifications and validations, including equipment qualifications and material specifications.
• Assist in ensuring product and process quality by supporting the design of testing methods and confirming manufacturing processes.
• Provide manufacturing decision-making information by assisting in calculations of production, labor, and material costs, and reviewing production schedules.
• Help prepare product and process reports by collecting, analyzing, and summarizing information and trends.
• Assist in keeping equipment operational by coordinating maintenance and repair services, following manufacturer’s instructions and procedures.
• Support Health & Safety initiatives in assigned areas, including accident investigation and corrective actions.
• Research state-of-the-art process technologies and evaluate their potential benefits.
• Participate in Validation Activities as directed.
• Assist in maintaining compliance with ISO 13485, GMP, and FDA regulations.

Education/Experience and Qualifications:

• Bachelor’s degree in Engineering or a similar technical field.
• Up to 2 years of experience in a high-volume production environment; experience in medical device manufacturing, particularly catheter production, is a plus.
• Strong interpersonal skills with the ability to communicate effectively at all levels within the company.
• Basic understanding of DOE and statistical techniques.
• Familiarity with process capabilities and control charting is preferred.
• Exposure to writing protocols for validations and qualifications, including FMEA and IQ/OQ documentation.
• Awareness of GMPs, ISO 9001, ISO 13485, and Medical Device Directives.
• Self-motivated and eager to drive change and innovation. Must be comfortable working in a fast-paced environment with minimal supervision.

Job Description

• Industry/ Organization Type: Engineering Service Provider
• Position Title: Project Engineer (Oil & Gas / Petroleum / Chemical)
• Working Location: West – Bukit Batok
• Working Hours: 5 days (Mon-Fri: 8.30 am - 5.30 pm)
• Salary Package: Up to SGD 5000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Acting as the principal technical liaison among the project team, customers, subcontractors, and the company.
• Reviewing project specifications and related documents.
• Ensuring the implementation of good engineering standards and practices.
• Focusing on understanding and solving customer technical problems to improve satisfaction.
• Maximizing project profitability through appropriate material buyout and engineering approaches.
• Developing and completing major engineering deliverables according to the Vendor Document Schedule.
• Managing design, analysis, and drafting to meet technical and schedule requirements.
• Handling quality control, including maintenance of non-conformance reports (NCRs) and specification waivers.
• Coordinating with the Document Controller to ensure adherence to technical and document control processes.
• Interfacing with the Project Manager for engineering deliverables and resources.
• Preparing material requisition specifications and conducting goods receipt inspections.
• Supervising fabrication/installation work and assisting with internal testing and FAT.
• Preparing final and As-built documentation, as well as Operation & Maintenance Manuals and Manufacturer Data Records.
• Promoting and developing solution capabilities and application knowledge to support current and future projects.

APPLY NOW!!!

• Min. Diploma in Instrument/Electrical/Chemical Engineering or equivalent
• Min. 2 years of relevant working experience in a similar industry
• Knowledge of Oil & Gas, Petroleum, or Chemical Industries would be preferred
• Familiar with Microsoft Office with knowledge of AutoCAD will be an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68467 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Performing machine/equipment calibration and maintenance.
• Liaising with machine suppliers on maintenance and servicing.
• Production process & productivity improvement based on process analysis finding.

Requirements:

• Bachelor in Mechatronics/Electronics/Avionics Engineering or its equivalent.
• Prefer 2 years of relevant working experience.
• Entry level with good attitude are welcome to apply as training will be provided.

5 days work week
East Area
Electronics Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

We are seeking a System Engineer for our client ST Engineering.

Responsibilities

· System Engineering Design

· Generating Test Plan & Procedures

· Sourcing and Procurement of System Hardware

· Planning and Setting up Test Lab

· Conduct Factory Acceptance Test

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults

· Perform On-Site Acceptance Test

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred

· Computer literate e.g. MS office, Visio

· Excellent Oral and Written Communication Skills

· Excellent Time-management

· Good Learning Capability

· Working location is in Jurong East

· Singaporeans Only

Please click apply, or submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Goh Kwan Way Marc

EA License No : 06C4642

EA Reg No : R24120754

We regret that only shortlisted candidates will be notified.

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deploy, administer, and support database and data lake infrastructures.
• Formulate and execute plans for high availability, backup, recovery, and disaster preparedness.
• Diagnose and resolve database issues and optimize performance.
• Enforce industry-standard security measures, policies, and best practices.
• Enhance clients' data warehouses and data lakes, and maintain comprehensive documentation.

Requirements

• Proficiency in Database Administration.
• Experience with Linux operating systems and scripting.
• Practical experience with at least one of the following: Hadoop Distributions, Relational Databases, or NoSQL Databases.
• Advantageous knowledge in one or more of the following areas: Data Virtualization tools, Scripting languages, Cloud platforms, and Docker/Kubernetes environments.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Our client is a leading manufacturing company. They are looking for a Senior System Software Engineer to upport the next phrase of their business. They are located at East of Singapore– easily accessible. The Senior System Software Engineer is responsible for:

Duties

• Design and develop the software architecture for company instrument systems.
• Collaborate closely with the hardware engineering team to analyze system requirements, ensuring functionality, performance, and reliability are achieved.
• Define and document software requirements, architecture, design, and test plans to align with system goals.
• Implement and test system software, addressing issues until resolved to meet customer expectations.
• Ensure timely delivery by aligning software development with project schedules and requirements.

Requirements

• Min Bachelor or Master’s degree in Computer Engineering, Computer Science or similar field.
• Solid knowledge and extensive working experience in low level communication protocol, motion control, device drivers and firmware will be preferred
• Solid programming skills in C/C++/C#
• At least 3 years of experience with system/architecture development on an equipment system.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcwKsApK

• Lead digital transformation through AI
• Engagement with senior business stakeholders

About the company

Our Client is one of the most established companies within their industry. They have a well-established presence of more than 15 years with a global footprint of more than 5 countries. With aggressive plan in investing in IT, they are now looking hire their AI Engineer to be based here in Singapore.

About the job

Your role involves:

• Collaborate with cross-functional teams to identify problems and deliver AI-powered solutions.
• Work with large datasets, preprocess data, and select appropriate algorithms for training.
• Continuously improve models by iterating, fine-tuning, and implementing state-of-the-art techniques.
• Contribute to the design and architecture of AI platforms and pipelines.
• Research and integrate new AI methodologies, tools, and frameworks to stay ahead in the field.
• Implement and test models, ensuring high quality and performance.
• Communicate complex AI concepts and results to non-technical stakeholders.
• Engaging with business stakeholders, translate business and technical requirements into data transformation jobs and design data models that powers data lake solutions to support AI/ML initiatives.

Skills and experience required

As a successful applicant, you will have at least 2 years of experience in AI/Machine learning. Exposure to regression models / decision tree regression and Gen A will be of added advantage.

Whats on offer

This is an excellent opportunity to led AI transformation with a leading company.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcwKsApK (EA: 94C3609/ R1219669)

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

• Permanent role
• Fast-growing organisation in the tech security industry

About Our Client

We are partnering with a fast growing start-up organisation in the tech security industry, headquartered in US.

Job Description

• To support the full software development lifecycle for new and existing mobile applications, SDKs and RESTful services
• Able to build reusable Android software components and develop mobile frameworks based on best practices
• To be involved in the design, development, testing and distribution of our mobile SDKs for Android
• Keeping up with the latest mobile technologies, devices, tools and conventions

The Successful Applicant

• Has at least 5 years of working experience in mobile development
• Strong experience with Java and Kotlin languages and developing in Android SDKs
• Has experience building maintainable and testable code bases, including API design, unit testing and UI testing techniques
• Familiar with Android development tools such as Xcode, CocoaPods, Android Studio, Gradle, Fastlane

What's on Offer

• Permanent role
• Fast-growing organisation in the tech security industry
• Variety of exposure to different projects, even working globally as well

Contact

Cheryl Ang (Lic No: R2091316/ EA no: 18C9065)

Quote job ref

JN-072024-6491862

Phone number

+65 6416 9884

Page Personnel Recruitment Pte. Ltd.| Registration No. 201736642C

• Proficiency in Scala programming and functional programming principles.
  • Strong SQL skills, including query optimization and database design.
  • Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).
  • Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.
• Problem-Solving:
  • Strong analytical skills with the ability to troubleshoot and resolve complex data issues.
• Communication:
  • Excellent communication skills to effectively collaborate with technical and non-technical stakeholders.
• Experience:
  • 6+ years of experience in data engineering, big data technologies, or a similar role.

Company’s Profile

Julian Grey’s client envisions global connectivity and innovation, striving to be among the best with a global outlook and cutting-edge technology.

Responsibilities

• Project deployment in Telecommunication Data Centre landscapes at various locations
• Executing installation, commissioning, and testing of transmission/DWDM systems
• Managing and resolving issues with telco equipment, including RMA processes
• Conducting software and firmware updates on systems

Requirements

• Fiber Optics Transmission Systems and Data Networking
• Test equipment and Systems Integration
• Experience with Visio, Linux Red Hat
• Familiarity with Ciena 6500 equipment is beneficial

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568