Responsibilities:

• Project Planning & Coordination: Organize and schedule project activities, including expediting timelines and completing field documentation. Collaborate with internal teams to ensure all project requirements are captured during the initiation phase.
• Design Review: Assess and verify design drawings prior to the start of construction.
• Stakeholder Engagement: Work closely with design teams, clients, and subcontractors to ensure seamless coordination throughout construction activities.
• Quality Assurance: Inspect subcontractor work to ensure it meets established standards and customer specifications.
• Project Execution Support: Assist the Project Manager in delivering projects on schedule, ensuring safety, and adhering to compliance standards.
• Testing & Commissioning: Oversee the testing and commissioning of equipment with subcontractors after installation.
• Customer Training: Conduct training sessions for clients following project handover.
• Final Inspections & Documentation: Perform final inspections, and prepare data for as-built drawings and comprehensive project documentation.
• EH&S Compliance: Adhere to and implement Environmental, Health, and Safety (EH&S) policies, procedures, and applicable regulations to achieve EH&S objectives.

Qualifications & Competencies:

• Bachelor’s degree in Engineering.
• At least 3 years of experience in project management.
• Strong proficiency in engineering management, problem-solving, analytical thinking, and understanding of commercial terms and conditions.
• Experience working within an ISO 9000 quality framework will be preferred
• Familiarity with Fire Protection and Fire Alarm Systems is required.

Who You Are

You are passionate about the Airline Crew and Ops business. You see yourself contributing

in a team and believe a team is more than the sum of its team members. You enjoy

communicating with different stakeholders as part of the project delivery, being self-driven

and support the goals of the entire team. You like to challenge yourself and others, actively

speaking out, seeking answers and listening. You like to work in a flat hierarchy structure.

You are adaptive, thrive in a dynamic environment, and see change as something positive

About Us

One third of pilots and cabin crew worldwide are flying with schedules produced by

Jeppesen's innovative solutions. One million pilots use our navigation products, and every

day some 70,000 routes around the world are planned with the help of Jeppesen solutions.

At Jeppesen, a subsidiary of Boeing, you will work with breakthrough technology, exciting

customers and fantastic colleagues from around the world. Our products comprise best-of-breed solutions that break down silos, enable more effective workflow, and amplify

cross-functional collaboration within the airline. Our culture is characterized by creativity,

professionalism and self-organization within an open, diverse and flexible work

environment.

We believe that our employees must be allowed to dream big and have fun for us to remain

one of the top companies in the industry. We encourage and enable our employees to

continuously develop their professional skillset and explore new areas. We are focusing on

continuous improvements and innovations to bring more value to our clients in the future.

About The Position

The Digital Services and Support (DSS) Implementation department is responsible for

development and delivery of our Crew and Ops management products to airline

customers. We are looking for Senior Systems Analyst/Software Engineer to join our

department based in Singapore. This is an opportunity to be part of an enthusiastic team

that solve some of the most challenging airline’s planning and operational problems.

In this position, you will work closely with our clients and develop applications to meet

their business needs. We are looking for applicants with strong communication skills who

can drive technical solutions decision in a confident way. The candidate should be good at

dealing with technical challenges as well as handling client expectations and building longterm customer relations.

Your responsibilities will include requirement gathering, software customization,

optimization modelling, testing and continuous improvement on the value proposition of

our products.

This position will be based in Singapore and the candidate needs to be able to travel to our

customers from time to time as part of the job, mainly within APAC region. We support

hybrid working model.

Basic Qualifications

• Bachelor Degree or higher in Computer Science/Computer Engineering/Electrical
• and Electronics Engineering/Information Systems or other relevant major with
• equivalent experience
• Comfortable working in Unix / Linux environment
• Adept in Python or similar languages
• Strong analytical and problem-solving skills
• Strong verbal and written communication skills
• Thrive working in a self-organized team structure

Preferred Qualifications

• Experience with Unix / Linux system administration, shell scripting, database,
• GitLab, CI/CD
• Experience working within a Scrum team or in similar Agile project setup
• Airline Crew/Ops Management knowledge
• Jeppesen Crew/Ops products customization experience

Relocation:

This position offers relocation based on candidate eligibility.

Work Authorization:

Employer will sponsor applicants for employment visa status based on candidate eligibility.

Other Job-related Information:

This requisition is for a locally hired position. Benefits and pay are determined at the local

level and are not on Boeing US-based payroll.

Our client is a leading manufacturing company. They are looking for a Senior System Software Engineer to upport the next phrase of their business. They are located at East of Singapore– easily accessible. The Senior System Software Engineer is responsible for:

Duties

• Design and develop the software architecture for company instrument systems.
• Collaborate closely with the hardware engineering team to analyze system requirements, ensuring functionality, performance, and reliability are achieved.
• Define and document software requirements, architecture, design, and test plans to align with system goals.
• Implement and test system software, addressing issues until resolved to meet customer expectations.
• Ensure timely delivery by aligning software development with project schedules and requirements.

Requirements

• Min Bachelor or Master’s degree in Computer Engineering, Computer Science or similar field.
• Solid knowledge and extensive working experience in low level communication protocol, motion control, device drivers and firmware will be preferred
• Solid programming skills in C/C++/C#
• At least 3 years of experience with system/architecture development on an equipment system.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

The incumbent will be responsible for identifying critical gaps, in the supplier process control, drive development of appropriate containment and closure with robust solutions at supplier sites. To develop solutions to verify implemented process controls, engage product engineering for clarification of specifications, partner with SDE to develop appropriate metrics, validate compliance to specifications etc.

Requirements:

• Detailed knowledge of Geometric Dimensioning & Tolerancing (GD&T), at least 1 year of related experience
• Knowledge of part dimension verification tools & techniques, and working experience with data visualization (MS Power BI, Tableau), data manipulation (SQL)

Interested candidates, please forward your most recent resume to [email protected]

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Key Responsibilities:

• Assist in evaluating manufacturing processes by supporting research programs, applying knowledge of product design and materials, and collaborating with operators and vendors.
• Help design and develop manufacturing processes for new products and enhancements, including related tooling and fixtures.
• Support process troubleshooting and refinements to improve product throughput and assembly techniques.
• Contribute to improving manufacturing efficiency by analyzing workflow, space requirements, and equipment layout.
• Participate in process qualifications and validations, including equipment qualifications and material specifications.
• Assist in ensuring product and process quality by supporting the design of testing methods and confirming manufacturing processes.
• Provide manufacturing decision-making information by assisting in calculations of production, labor, and material costs, and reviewing production schedules.
• Help prepare product and process reports by collecting, analyzing, and summarizing information and trends.
• Assist in keeping equipment operational by coordinating maintenance and repair services, following manufacturer’s instructions and procedures.
• Support Health & Safety initiatives in assigned areas, including accident investigation and corrective actions.
• Research state-of-the-art process technologies and evaluate their potential benefits.
• Participate in Validation Activities as directed.
• Assist in maintaining compliance with ISO 13485, GMP, and FDA regulations.

Education/Experience and Qualifications:

• Bachelor’s degree in Engineering or a similar technical field.
• Up to 2 years of experience in a high-volume production environment; experience in medical device manufacturing, particularly catheter production, is a plus.
• Strong interpersonal skills with the ability to communicate effectively at all levels within the company.
• Basic understanding of DOE and statistical techniques.
• Familiarity with process capabilities and control charting is preferred.
• Exposure to writing protocols for validations and qualifications, including FMEA and IQ/OQ documentation.
• Awareness of GMPs, ISO 9001, ISO 13485, and Medical Device Directives.
• Self-motivated and eager to drive change and innovation. Must be comfortable working in a fast-paced environment with minimal supervision.

Job Description

• Industry/ Organization Type: Engineering Service Provider
• Position Title: Project Engineer (Oil & Gas / Petroleum / Chemical)
• Working Location: West – Bukit Batok
• Working Hours: 5 days (Mon-Fri: 8.30 am - 5.30 pm)
• Salary Package: Up to SGD 5000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Acting as the principal technical liaison among the project team, customers, subcontractors, and the company.
• Reviewing project specifications and related documents.
• Ensuring the implementation of good engineering standards and practices.
• Focusing on understanding and solving customer technical problems to improve satisfaction.
• Maximizing project profitability through appropriate material buyout and engineering approaches.
• Developing and completing major engineering deliverables according to the Vendor Document Schedule.
• Managing design, analysis, and drafting to meet technical and schedule requirements.
• Handling quality control, including maintenance of non-conformance reports (NCRs) and specification waivers.
• Coordinating with the Document Controller to ensure adherence to technical and document control processes.
• Interfacing with the Project Manager for engineering deliverables and resources.
• Preparing material requisition specifications and conducting goods receipt inspections.
• Supervising fabrication/installation work and assisting with internal testing and FAT.
• Preparing final and As-built documentation, as well as Operation & Maintenance Manuals and Manufacturer Data Records.
• Promoting and developing solution capabilities and application knowledge to support current and future projects.

APPLY NOW!!!

• Min. Diploma in Instrument/Electrical/Chemical Engineering or equivalent
• Min. 2 years of relevant working experience in a similar industry
• Knowledge of Oil & Gas, Petroleum, or Chemical Industries would be preferred
• Familiar with Microsoft Office with knowledge of AutoCAD will be an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68467 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Performing machine/equipment calibration and maintenance.
• Liaising with machine suppliers on maintenance and servicing.
• Production process & productivity improvement based on process analysis finding.

Requirements:

• Bachelor in Mechatronics/Electronics/Avionics Engineering or its equivalent.
• Prefer 2 years of relevant working experience.
• Entry level with good attitude are welcome to apply as training will be provided.

5 days work week
East Area
Electronics Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

We are seeking a System Engineer for our client ST Engineering.

Responsibilities

· System Engineering Design

· Generating Test Plan & Procedures

· Sourcing and Procurement of System Hardware

· Planning and Setting up Test Lab

· Conduct Factory Acceptance Test

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults

· Perform On-Site Acceptance Test

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred

· Computer literate e.g. MS office, Visio

· Excellent Oral and Written Communication Skills

· Excellent Time-management

· Good Learning Capability

· Working location is in Jurong East

· Singaporeans Only

Please click apply, or submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Goh Kwan Way Marc

EA License No : 06C4642

EA Reg No : R24120754

We regret that only shortlisted candidates will be notified.

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deploy, administer, and support database and data lake infrastructures.
• Formulate and execute plans for high availability, backup, recovery, and disaster preparedness.
• Diagnose and resolve database issues and optimize performance.
• Enforce industry-standard security measures, policies, and best practices.
• Enhance clients' data warehouses and data lakes, and maintain comprehensive documentation.

Requirements

• Proficiency in Database Administration.
• Experience with Linux operating systems and scripting.
• Practical experience with at least one of the following: Hadoop Distributions, Relational Databases, or NoSQL Databases.
• Advantageous knowledge in one or more of the following areas: Data Virtualization tools, Scripting languages, Cloud platforms, and Docker/Kubernetes environments.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

As the Facilities regional Water engineer, you will be responsible for leading water and waste water system design for construction projects, providing technical support, expertise, and lead business process alignment on operational and maintenance programs for all front and back end sites.  As a global team member residing in your current site/geography, you will represent all regional facility O&M alignment initiatives. You will also lead the design for construction team and incorporate critical operational and maintenance into design for construction projects. You will work with central team on critical metrics, include eliminating production events that minimize lost moves and scrap.

Responsibilities and tasks:

• Expert understanding of each sites UPW/WWT systems operational and maintenance capabilities in order to provide critical support.
• Leading UPW/WWT system design for construction projects
• In addition to your global water engineering role you will also provide site/regional support for global facility initiatives at your location.
• Technically lead a global cross functional team focused on operational excellence with the site systems engineers.
• Provide support to all sites including on site presence for critical failures.
• Actively involved in TPM implementation and alignment along with ongoing support
• Drive improvement in the quality of our utilities through variation reduction (SPC).
• Drive the alignment for common methodologies including SPC, conformance, SIPP’s, MOC and 8D problem solving throughout the network.
• Identify and deploy cost reduction efforts while optimizing and reducing energy usage for UPW/WWT systems throughout the network.
• Assess and insure effective and consistent PM and predictive maintenance programs, procedures and checklists across the network.
• Regular communication with the site engineering and O&M teams on status and performance.
• Analyze and benchmark equipment performance.
• Identify and develop training and certification programs that support global and site efforts
• Develop appropriate metrics to drive improvement (On time PM’s, MTTF, MTTR etc.).
• Send out regular updates with key items of focus and initiatives. 
  You will review FIPA/METS events and provide recommendations to drive the reduction of critical impact events.
• Collaborate with the construction / engineering team to insure alignment on projects.
• Review site sustaining capital requests in collaboration with construction/engineering.
• Support the network effort to implement, monitor and drive continuous improvement for success of Micron’s Sustainability programs in alignment with the long-term Sustainability strategy.
• Benchmark system performance and drive Best-In-Class approach (BICs) across network.
• Provide technical advice and support to overcome challenges and roadblocks in project planning & execution.
• Support sustainability projects achievement data acquisition and validation in central tracking depository.

Requirements:

• Excellent analytical and good decision making skills.
• Excellent interpersonal skills and demonstrated ability to communicate effectively at all levels within the organization.
• Excellent teamwork and collaboration with other groups, internally and externally.
• Proven ability to solve problems across multi-functional and multi-cultural groups within and outside facilities.
• Proven ability to multi-task and lead team to meet challenging deadlines and goals.
• Proven ability to continuously improve systems and processes.
• Ability to foster strong relationships from cross-functional and multi-cultural groups.
• Exceptional customer focus.

Education Required

• Bachelor’s Degree in Chemical/Mechanical Engineering

Experience required

• 10 years of Facilities  UPW/WWT or Chemical/Gas system engineering experience with minimum 6 years in semiconductor industry

Experience Desired

• Lead or actively involved in global facility engineering efforts

• Lead & Support in the development of cloud infrastructure solutions.
• Management of Cloud infrastructure set up & implementation projects.
• Specialize in the best practice design, operations, and support of private/public/hybrid cloud infrastructure including Network, Storage, Compute and Security.
• Provide detailed designs on the IT projects assigned ensuring right architecture and functionality.
• Support new technology implementation.
• Handle project implementation from start to end.
• Aid with technical issues.
• Involve in Proof of Concepts.

Responsible for M&E Design, Prepare BOQ, sourcing the quotation and prepare quotation.

* To assist or Lead the development and submission of high-quality M&E tenders, ensuring compliance with all client requirements and submission deadlines.

*To Attend site survey for tender briefing.

Interpretation of tender specifications, client requirement, drawings and any other relevant documents; not limited to Project Presentation,

*To prepare and fill up Schedule of Rates, Technical Data, Risk Assessment, Bill of Quantity and documents needed for Tender Submissions.

*Able to assist client for Value Engineering.

Conversant with Singapore building codes and regulations.

*Strong effective communication and consultative skills.

*Strong in communication skills and a team player.

*Provide guidance and support to project teams in the implementation of successful M&E practices.

Ensure adherence to company policies and procedures throughout the tender process.

Job Requirements:

Preferably hold a Diploma or Degree in Quantity Surveyor /Electrical Engineering

At least 5 years of relevant working experience in project or A&A M&E Works

Preferably have knowledge on how to prepare M&E technical design, technical write-up, prepare tender specifications and presentation slide for tender interviews

MUST understand the process of tender preparation and submission

MUST have experience in project costing and estimating

Strong in Tender Presentation Skill

Highly self-motivated, good working attitude with high level of professionalism & integrity

Well-versed in MS offices tools i.e. Words, Excel and PowerPoint

Strong understanding of M&E methodologies and best practices.

Excellent written and verbal communication skills.

Requires travelling to various worksites in Singapore

Requires to perform night work/weekends when need arises.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
• Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Design, develop, and maintain software applications using C#.
• Develop and implement automated test equipment and process systems.
• Write clean, scalable, and efficient code.
• Troubleshoot, debug, and upgrade existing software.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Participate in code reviews to maintain code quality and share knowledge.
• Ensure software meets all requirements of quality, security, modifiability, extensibility, etc.
• Document development processes, code changes, and other relevant information.
• Support internal and external BUYOFF, ensuring completion of Factory and Site Acceptance with customers and the project team.
• Quickly resolve issues by working with the project and production teams.

Requirements:

• Bachelor’s degree in Engineering, Computer Science, or a related field.
• Proven experience as a software Development Engineer or similar role.
• Strong proficiency in C# programming.
• Experience with test equipment and automation process systems.
• Knowledge of electrical and electronics hardware.
• Familiarity with test instrumentation and motion systems.
• Basic understanding of vision systems.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.
• Knowledge of hardware interfacing and control systems.
• Experience with CI/CD pipelines and automated testing frameworks.

Office Location : Tai Seng

Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm

Salary (commensurate with experience) : Up to $5,000 + Variable Bonus + Annual Leaves + Medical Benefits

Industry : Construction Sector - A&A / Building Works

Job Responsibilities:

•Check and analyse drawings, authority requirements and tender specifications

•Check site installation whether it is in accordance to design and standards

•Check and prepare for discrepancies of drawings to be highlighted to consultant

•Oversee the projects and follow the terms and conditions of contracts. Ensure compliance to contracts and the drawings with regulatory specifications

•Able to coordinate with owners, architects, consultants, project managers, sub-contractors and suppliers.

Job Requirements:

•Candidate has at least 2 years of relevant working experiences that possess Degree in Construction, Civil Engineering and M&E or equivalent

•Entry level candidates are encouraged to apply ，as training will be provided.

•Knowledgeable in basic Autocad software

•Has positive attitude and sense of responsibilities

•Able to handle construction projects with commitment on work

•Good in communication and written abilities

•Required skill : Able to use Microsoft Project to present schedule to the clients

Maxhunt Resource Pte Ltd | EA Licence: 22C1322
Loh Wing Sheng | Registration No: R22110239

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for AI Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design, build, and optimize machine learning models and algorithms to solve specific business problems.
• Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.
• Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance using techniques such as cross-validation, hyperparameter optimization, and ensemble methods.
• Deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.
• Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.
• Perform exploratory data analysis, generate insights, and present findings to stakeholders, using statistical methods and visualization techniques.

Requirements:

• Education qualification in Computer Science, Data Science, Machine Learning or relevant field (Fresh grads or students currently pursuing this area of studies are welcome to apply)
• Work, project or internship experience in designing, developing, and deploying machine learning models in real-world applications will be a strong advantage
• Knowledge of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn)

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

[Job ID: 782382]

Responsibilities:

• Oversee the delivery and installation of bag-making machines (industrial machinery) at client sites
• Ensure proper setup and functioning of machinery as per company standards
• Conduct training sessions for clients on the correct operation and maintenance of the equipment
• Provide clear and detailed demonstrations tailored to client needs.
• Address customer inquiries and provide effective solutions for troubleshooting and repairs
• Perform routine maintenance and ensure the longevity of machinery
• Collaborate closely with the technical team at the headquarters in Japan to resolve complex technical issues
• Relay customer feedback to improve product design and performance.
• Any other ad-hoc assigned

Requirements:
Nonexperience is welcome to apply

• Strong analytical and problem-solving skills to address technical issues
• Strong interpersonal and communication abilities
• Proactive, self-motivated, and customer-oriented mindset
• Willingness to travel internationally as part of the job
• Interest in machinery and Japanese customer service standards
• Proficient in Japanese to liaise with the headquarters in Japan
• Hands-on experience with industrial machinery

If you are interested, please feel free to contact me at
[email protected]


Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Ochi Madoka
EA Personnel Registration Number: R24125474
EA License No.: 07C5771

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 2 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Prior experience with some programming languages (HTML, JAVA) will be an added advantage.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Job Description / Responsibilities:

• Development

1. Design and synthesize new polymers with desired properties for various applications.
2. Conduct experiments to understand the relationship between polymer structure and its physical and chemical characteristics.
3. Analyse and interpret data from various techniques like spectroscopy, chromatography, and thermal analysis to characterize polymers.

• Polymer Production and Processing

1. Develop and optimize production processes with productivity and cost effectiveness.
2. Troubleshooting issues arising during mass production and suggest solutions.
3. Collaborate with related department to ensure smooth integration of new polymers into existing production lines.

• Material Characterization and Testing

1. Perform various tests to evaluate the mechanical, thermal, electrical, and other properties of polymers.
2. From the test results to make a judgement the suitability of polymers for specific application.
3. Proceed with modification to polymer formulation based on performance needs.

• Communication and collaboration

1. Document research findings and experimental procedures in clear and concise report.
2. Present research results to colleagues, management, or external audiences.
3. Collaborate effectively with related parties to achieve project goals and to resolve issues.
4. Support training new products/process modification for related parties.
5. Train basic knowledge in lab for new staff

• Laboratory Management

1. Safe operation and up-keep 5S of laboratory.
2. Training of new lab staff.
3. Lab work planning and scheduling.
4. Equipment & spare parts management.
5. Maintain chemical inventory.

• Others - Perform any other tasks assigned by the manager

Requirements:

• Degree in chemical engineering, Polymer synthesis chemistry, or equivalent.
• At least 3 years of relevant working experience – Chemist
• Understand the hazardous of materials from SDS + Singapore regulation and judge an appropriate instruct.
• Basic knowledge and practical experience for chemical experiments.
• In depth knowledge of polymerization mechanism and kinetics.
• Expertise in polymer characterization evaluation techniques.
• Operate spectroscopy, chromatography and thermal analysis.
• Ability to interpret and analyse data.
• Excellent written and verbal communication skills.
• Ability to collaborate effectively with colleagues.
• Understanding of relevant safety regulations and best practices.
• Project management skills.

Others:

• Location: Jurong Island (Company Transport provided)
• Commence work: ASAP.
• Working Hours: Mon ~ Fri, 8:00 am - 4:45 pm

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Position: System Operations L2

Duration: 12 months initial contract

Location: Singapore

• Experience in Active Directory/ Entra AD required
• Monitor and maintain Windows and Linux servers to ensure optimal performance and uptime.
• Assist in troubleshooting and resolving system-related issues for both platforms.
• Perform routine maintenance tasks, including updates, patches, and backups.
• Manage user accounts and access permissions across Windows and Linux environments.
• Support system deployments, configurations, and software installations.
• Document system configurations, processes, and procedures for future reference.
• Assist with system monitoring and generate performance reports.
• Collaborate with senior team members to implement security measures and best practices.
• Participate in disaster recovery and business continuity planning activities.
• Provide technical support to end-users and escalate issues as needed.

Job Description

• Industry/ Organization Type: IT Consultancy Firm
• Position Title: IT Sales Executive/ Sales Engineer
• Working Location: Ang Mo Kio
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4,000 + Commission + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Drive growth and meet sales targets by acquiring new customers.
• Develop and implement a strategic sales plan to expand the customer base.
• Provide sales, revenue, and expense reports, along with realistic forecasts, to the management team.
• Recognize emerging markets and market changes while staying informed about new products and competitive landscape.
• Comprehend the characteristics of our ideal customers and their connection to our products.
• Foster and maintain strong, long-term customer relationships by collaborating with them and addressing their needs.

APPLY NOW!!!

• Minimum Diploma in IT, Computer Science or related discipline.
• At least 2 years in Enterprise Software/ Security Software channel sales or channel partner development.
• Able to travel to Asia Pacific countries as and when needed.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70399 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641