Job Description

• To act as Senior Civil Site Engineer for the construction of underground MRT Station
• Plan and Supervise ERSS and Deep Excavation works
• Supervise and ensure strict quality control
• Prepare and Review Technical Documents
• Keep record of all site activities and prepare daily site report
• Supervise any repair works
• Monitor and report progress of the works on site
• 60 hours per week working hours

Requirements

• Possess a Degree in Civil Engineering
• Master Degree in Civil / Strutural Engineering is preferred
• Very good experience in deep excavation, Earth Retaining Stabilizing Structures (ERSS), piling works (bored piles, sheet piles, soldier piles), pile load testing (ULT and PDA), ECM and pipe jacking works
• Relevant experience in ground improvement techniques (DCM, WSM, and JGP)
• Relevant experience in the construction of strutting works, Excavation, Secant Bored Pile, Diaphragm Wall
• Minimum 12 years of relevant experience in the above area

Job Responsibilities:

• To be involved in the planning and execution of civil and structural engineering works.
• Assist Management in monitoring and managing the day-to-day operation of the projects.
• To prepare method of statement, construction sequencing, sketches, and other technical submissions.
• To monitor the execution of the site works. To review and further develop the method and/or sequence of the works to ensure safety and efficiency.
• To assist in the preparation of RA/SWP and other safety documents.
• To collaborate with peers, and to liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare Inspection and Test Plan, and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification and submit technical clarification to the clients and consultants. Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Prepare site record and submit to office in a timely manner.
• Undertake ad-hoc duties as assigned by the management.

Requirements:

• Candidate must possess at least a bachelor’s degree in engineering (Civil) or equivalent from a recognized University accredited with the Professional Engineers Board, Singapore.
• Preferably with design, consulting experience and Improvement works to Surface Car Parks.
• Conversant with Eurocode or Local codes and regulations as well as submission procedures.
• Well knowledge in CAD, BIM and other Civil Engineering software is necessary.
• Good project management and ability to work independently and under pressure to meet tight schedules.
• Proficient in MS office applications and keen to learn new things.
• Good communication skills and able to interact with people of all levels and teamwork.
• Candidates with more years of experience may be considered for a senior role.

Position Overview:

We are looking for a motivated and skilled Mechanical Design Engineer to join our dynamic team. In this role, you will be responsible for designing, analysing and overseeing the structural integrity of mechanical systems and components for our products. These include specialty vehicles, engines and shelters. This role demands a strong understanding of mechanical design, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

· Develop and optimize mechanical designs for mechanical and automotive systems, focusing on efficiency, manufacturability, and sustainability.

· Collaborate with multidisciplinary teams, including electrical and software engineers, to create innovative solutions that meet customer needs.

· Utilize advanced CAD tools (such as SolidWorks) to create 3D models and detailed engineering drawings.

· Perform simulations and analysis to validate designs and ensure they meet performance and safety criteria.

· Create prototypes and conduct hands-on testing to gather data, evaluate performance, and refine designs.

· Participate in design reviews and contribute to brainstorming sessions to drive continuous improvement and innovation.

· Maintain thorough documentation of design processes, test results, and compliance with industry regulations.

· Stay updated on industry advancements and incorporate new technologies and methodologies into your work.

· Support manufacturing team with technical guidance to ensure smooth production processes and troubleshoot any design-related issues.

Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree or higher qualification is a plus.
• At least 2 years of experience in mechanical design engineering, ideally within the automotive sector.
• Proficiency in 3D CAD software (e.g. SolidWorks) and familiarity with simulation tools (e.g. FEA, CFD).
• Strong knowledge of mechanical design standards, materials, and manufacturing processes.
• Excellent analytical and problem-solving skills with a focus on innovative solutions.
• Effective communication skills, both written and verbal, with the ability to collaborate in a team-oriented environment.
• Results-driven and detail-oriented mindset with a passion for engineering excellence and continuous improvement.

Preferred Skills:

• Strong communication and teamwork skills
• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle system design and testing procedures.
• Knowledge of mechanical engineering principles as they apply to vehicle systems and structures.
• Experience with project management and leadership in a technical environment.

What we offer:

· Competitive salary and benefits package

· Opportunities for career advancement and professional development

· Collaborative work environment that fosters innovation and communication

· Mentorship and guidance on best practices in automotive and mechanical design

· Opportunity to work on exciting projects at the forefront of automotive technology

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

Job Description

• Designs of electrical engineering service for building projects, and knowledge of mechanical engineering services
• Prepare tender documents, call tenders, evaluate tender returns and recommend tender awards
• Project management, coordination, supervisions, testing and commissioning for installations of mechanical and electrical engineering services during construction phases. This includes reviewing shop drawings, progress claims and variation claims.
• Engage in discussions with relevant authorities for preparations and submissions of plans
• Attend meetings with clients, contractors and suppliers
• Manage project through defined project scopes, detailed project plans & seek client’s agreements for sign-off
• Track project status and provide regular updates to ensure projects are on tracks
• Any other works as may be directed due to specific requirement of the projects

Job Requirements

• Bachelor's Degree in Electrical Engineering or related fields
• Preferably 1 to 5 years of working experience in designs, supervisions and implementation
• Experience in engineering consultancy or construction industry would be an added advantage
• Able to multi-task and work in fast-paced environment

As an EUV Photo Project Engineer in Operation Central Team (OCT) Central Process and Equipment Engineering (CPEE) Photo Scanner at Micron Technology, Inc., you will lead project activities to achieve and maintain outstanding EUV Ecosystem in high volume manufacturing.

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

Responsibilities:

• Ensure a safety-first culture for all program and project solutions.
• Oversee the EUV Litho Cluster, including Scanner and Track installation, to meet TIQ (Tool Installation Qualification) goals.
• Close collaboration with EUV ecosystem suppliers (ASML, TEL, Edward Zenith, Zinter, etc) and internal partners (HVM fabs, Central Teams, Technology Development teams).
• Manage EUV Reticle support tools (e.g., Reticle inspection tools, Reticle Clean tools, EUV Reticle pod storage, Pod Clean tools etc) through closed collaboration with Fab and Central Reticle Teams.
• Drive EUV Industrialization goals by leading Supplier Workstream Programs (Eg: Scanner, Source, Drive Laser, TEL Track etc) to achieve industry outstanding performance in Imaging, Overlay, Rework, Defectivity, and Efficiency (Wafers Per Day).
• Drive and facilitate Governance meetings and cross-collaboration projects with internal and external partners to achieve Micron Strategic Initiatives (Eg: cost, yield, quality, Maxout, environmental sustainability).
• Demonstrate strong communication and reporting skills to provide regular Executive updates on project progress, challenges, and escalation for resource support.
• Oversee processes, guide initiatives, and lead project team members toward goal achievement using analytical skills and problem-solving techniques.
• Proactively identify bottlenecks, drive improvements, and share standard methodologies across HVM fabs.
• Demonstrate ownership and accountability in delivering results.

Requirements:

• Global Factory Network Expertise: Demonstrated understanding of worldwide high-volume manufacturing network operations across different geographical region.
• Leadership and Strategic Initiatives: Proven ability in team development and leading transformative initiatives.
• Manufacturing Knowledge: Familiarity with Front End (FE) manufacturing, reticle manufacturing, and fab processes.
• Project/Resource Management: Ability to manage Global Project and Resource.
• Effective Communication: Skilled at communicating effectively across various organizational levels.
• Customer-Focused Project Management: Proficient in project management with a strong customer focus.
• Continuous Learning Advocate: Continuous learning on the job and provide technical mentoring for peers.
• Minimum 4 years’ experience working as Photolithography Equipment/ Process Engineer or Photo Scanner Engineer in Wafer Fab. ASML EUV Scanner experience will be an advantage
• Bachelors/master’s degree in Electrical, Electronics, Mechanical Engineering

You will be responsible for providing leadership to the global Micron network to drive Photo EUV Productivity, Hardware, Application, Value Engineering, Continuous Improvement Program, Cost reduction, TOR and BKM governance through technical expertise, business process management and project execution.
You'll be working closely with various teams like Process Equipment Engineering Groups, Technology Development, Procurement, and the Central Team, as well as interacting with equipment suppliers to address manufacturing issues. Effective collaboration with manufacturing sites, Quality Engineering, and other functional departments is key, with an exciting element of international travel to achieve your goals.
It’s a great opportunity for someone who enjoys challenges in State of Art Technology in EUV, teamwork and global experiences!

Job Description:
We are seeking a skilled and motivated System Performance Engineer to join our team. In this role, you will develop and optimize operator libraries for large model inference, training, and fine-tuning processes. You will map operator library implementations to hardware, conduct performance analysis, and identify bottlenecks to maximize system efficiency and performance.

Key Responsibilities:

• Operator Library Development: Develop and optimize libraries for large model inference, training, and fine-tuning, ensuring efficient operation on hardware platforms.
• Performance Analysis: Analyze operator library implementations to identify and resolve performance bottlenecks, optimizing for memory usage, processing time, and data accuracy.
• Optimization Implementation: Engage in the software design and optimization of operator libraries, including instruction-level parallelism, to maximize hardware performance.
• Mapping to Hardware: Map operator library implementation to the underlying hardware, ensuring seamless execution and improved performance.
• Testing and Validation: Perform detailed testing, including memory usage and processing time analysis, to validate optimized library performance.

Qualifications:

• Educational Background: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Strong understanding of large model algorithms and the principles behind their design.
  • Proficiency in computer architecture and many-core processor principles.
  • Practical experience in CPU performance optimization.
• Programming Skills: Expertise in C/C++ programming for performance optimization.
• Communication Skills: Excellent interpersonal and communication abilities to collaborate effectively within cross-functional teams.

Why Join Us?

• Work on cutting-edge technologies and contribute to the development of high-performance systems.
• Collaborate with a dynamic team of experts in semiconductor and hardware design.
• Make an impact on the performance of next-generation hardware systems.

• Oversee and manage the day-to-day operations of UAT environments
• Offer technical support to software development teams for application and testing needs
• Assist project management teams in various project-related tasks and activities
• Manage and maintain Windows and Linux server environments, ensuring optimal performance and security
• Perform infrastructure setup and deployment tasks for application environments, including configuration, provisioning, and deployment
• Handle account management activities, creating, modifying, and deleting user accounts and permissions
• Develop and maintain comprehensive documentation for application processes and procedures, including user guides, technical manuals, and standard operating procedures

Requirements:

Minimum 2 years of software development, testing, and support experience.

Strong proficiency in

• Database query languages (Oracle/MSSQL)
• SSH/SFTP client/server operations
• Public/private key and certificate management
• IIS web server administration, including certificate generation
• Linux server OS administration and command-line proficiency
• MSMQ messaging services
• Collaborative and independent software/IT project work

Strong proficiency in scripting for the following:

• PowerShell (Must Have).
• Windows Batch scripting (Must Have).
• VB scripting (good to have).

Additional Info:

• Company Location: East Side

To apply, please visit www.gmprecruit.com and search for Job Reference: 25029

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

We are seeking a highly skilled and innovative Executive Engineer, Mechanical to join our dynamic team in Singapore, Singapore. In this role, you will be responsible for designing and implementing cutting-edge mechanical engineering solutions for various building and infrastructure projects.

• Design and perform calculations for mechanical engineering works, including ACMV, fire protection systems, plumbing, and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Develop comprehensive study reports, design reports, and technical specifications for mechanical engineering projects
• Prepare detailed tender documents and evaluate proposals, providing thorough assessment reports
• Collaborate with cross-functional teams to ensure project goals are met efficiently and effectively
• Provide support in project management and contract administration for building engineering contracts
• Implement innovative mechanical engineering solutions while staying up-to-date with industry trends
• Troubleshoot and resolve complex mechanical engineering issues as they arise
• Mentor junior engineers and contribute to the overall growth of the engineering team
• Ensure compliance with industry standards and regulations in all project phases

1) Must be able to prepare shop drawings, fabrication drawings and as-built drawings for roller shutter doors.

2) Must be well experienced in designing submarine doors and submarine windows.

3) Must be highly adaptable to work at various jobsite, including exposure to outdoor working environments.

4) Flexible working arrangement but candidates must be willing to work long and irregular hours, including on weekends if projects are operational.

5) Must have working knowledge of AutoCad 2D & 3D.

6) Must have a 4 years Diploma.

7) Minimum 4 years experience in construction sites.

8) Only Singaporeans and PR need to apply.

At Avetics Global, we provide drone technology solutions and services to engineer impact to our clients.

As part of our team, you'll have the opportunity to contribute to exciting projects and gain hands-on experience.

Associate Electrical Engineer

Responsibilities

• Integration of Drones
• ⁠Perform equipment/engineering systems setup
• Perform testing/calibration of components and system
• Perform maintenance, repairs, and troubleshooting of drone
• Applying relevant electrical skills in preparation of components
• Assist in trial support

Requirements

• Minimium Diploma holder
• We welcome candidates with no experience to apply if you are familiar with soldering and crimping skills
• Preferably 1-2 years of soldering and crimping experience
• Team player
• Meticulous in producing high quality engineer work
• Being able to work independently
• Good time mangement skills
• Good problem solving skills,
• Ability to use engineering tools well and have a positive mindset to support troubleshooting
• Soldering and crimping skills

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical (Building Services) to join our Building Services team in Singapore.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

• Leading mechanical services (HVAC) design for building projects
• Assume responsibility and undertake engineering tasks of increasing scope and complexity
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• In charge of jobs control, planning, monitoring, progress and job cost reporting
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job
• Assist in assessment and review of designs prepared by others on behalf of the clients
• Liaise with authorities on plans submission and compliance

Pre-Requisites

• Degree in Mechanical Engineering
• At least 5 years experiences in consulting firm
• Leading roles experience in ventilation & air-conditioning (HVAC, Plumbing & Drainage) design & design management of commercial, healthcare or school projects will be an advantage
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS, Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and professional development opportunities along with a supportive and caring work environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply online now with your CV.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Highlight:

• Homeland Security Domain Provider
• Permanent job opportunity
• Great remuneration & benefits
• Great career progression
• Location: East

Responsibilities:

• Stay up-to-date of the current threat landscape and cybersecurity events, continuous knowledge improvement in tools and best practices in Cyber Security Protection.
• Communicate across internal divisions, customers, vendors and partners.
• Write technical proposal, communicate and present the solution.
• Deliver the project by coordinating with project team members to deliver project deliverables and complete project milestones.
• Review security architectures, designs to ensure the adoption of various security practices, baselines and standards.
• Conduct and perform various security tests, reviews and audits.
• Articulate clearly on the cybersecurity risks and mitigation measures to stakeholders.
• Evaluate security products and conduct Proof of Concept (POC) to verify the effectiveness of each security measures, and to make certain that the security measures will continue to be effective after implementation.
• Provide guidance and consultancy to stakeholders to remediate security risks or recommend risk mitigations.
• Provide guidance and consultancy to stakeholders to ensure secure lifecycle aligned to baselines and standards

Requirements:

• Degree in Cyber Security or related field or attained Cyber Security professional qualification (e.g. CISSP or equivalent).
• Minimum 2 years of experience in in cyber security domain with relevant experience on security governance, design and architecture.
• Experienced in turn-key development, implementation and maintenance of large-scale, multi-platform, multi-vendor systems in the IT and engineering domain.
• Familiar with typical enterprise security solutions, such as Endpoint Security, Identity & Access Control solutions, Network Security, Analytics solutions, Data Loss Prevention or Vulnerability and Compliance.
• Familiar with the conduct of a typical project lifecycle in terms of the various milestones and deliverables.
• Sound understanding of network and server infrastructure.
• Good presentation skills, communication, negotiation, interpersonal skills and customerservice orientation.
• Hands on, self-directed executive who plans, prepares and executes professionally along with management of tight deadlines

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

• Provide excellent customer service.
• Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification and escalation.
• Support on desktops, notebooks, printers, scanners hardware components.
• Installation, re-installation, troubleshooting and reconfiguration of Microsoft Windows and Microsoft applications that are found in the Desktop PCs and Notebook PCs. Examples of such software are Windows 10 OS or any standard desktop OS, MS Office, Internet Explorer, MS Outlook, MS Outlook Express, etc.
• Installation of Apple IPad software’s.
• Provide support for queries, escalation, problem determination, resolution and MAC – move, add and change.
• Printer Maintenance.
• Take on and resolve complex calls or tasks the other engineers could not resolve.
• Responsible for learning and working independently.
• Responsible for providing excellent support and timely service.
• Any other adhoc duties that is assigned by supervisors.

Requirements:

• At least a Professional Certificate, Diploma or advanced /Higher /Graduate Diploma.

Skill Sets:

• Hardware Skill – Desktop, Laptop, Printer and Scanner
• Windows OS (Must know Windows 10)

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

We are an early-stage cybersecurity startup focused on building innovative, real-time security solutions that protect enterprises against emerging threats. As part of our team, you’ll join a passionate group of engineers dedicated to creating high-performance, reliable products that meet the security needs of modern businesses.

Role Overview:

As a Senior Backend Engineer, you will be instrumental in designing and implementing the core backend architecture of our products. We’re looking for someone with deep expertise in Rust or Golang and a proven track record of developing and scaling highavailability systems. You’ll work closely with cross-functional teams to build MVPs, iterate on them, and scale solutions that are reliable and performant under high loads.

Key Responsibilities:

• Design, develop, and maintain robust backend systems using Rust or Golang.

• Build real-time, high-availability solutions that can handle large volumes of data with low latency.

• Lead the architecture and development of MVPs, iterating rapidly to meet evolving product requirements.

• Implement and optimize systems to ensure scalability, reliability, and performance as we grow.

• Collaborate closely with frontend engineers, DevOps, and product teams to deliver end-to-end features.

• Write clean, testable, and well-documented code, following best practices in software development and security.

• Participate in code reviews and provide technical mentorship to other engineers.

• Keep up-to-date with the latest advancements in backend technologies, contributing to our technical vision and growth.

Qualifications:

• 2-5+ years of experience in backend engineering, with at least 1 year in Rust or Golang.

• Proven expertise on working with Kafka

• Strong understanding of real-time systems, with experience building highavailability solutions.

• Proven experience in building and scaling MVPs to production-grade systems.

• Solid understanding of database design, distributed systems, and RESTful/GraphQL APIs.

• Excellent problem-solving skills, with a proactive attitude and attention to detail.

• Strong collaboration and communication skills, with the ability to work effectively in a fast-paced startup environment.

Nice to Have:

• Experience in early-stage startups, with a focus on cybersecurity or related fields.

• Familiarity with containerization, microservices architecture, and cloud platforms.

• Knowledge of other backend languages or frameworks.

Job Description

• Designs of mechanical engineering service for building projects, and knowledge of electrical engineering services
• Prepare tender documents, call tenders, evaluate tender returns and recommend tender awards
• Project management, coordination, supervisions, testing and commissioning for installations of mechanical and electrical engineering services during construction phases. This includes reviewing shop drawings, progress claims and variation claims.
• Engage in discussions with relevant authorities for preparations and submissions of plans
• Attend meetings with clients, contractors and suppliers
• Manage project through defined project scopes, detailed project plans & seek client’s agreements for sign-off
• Track project status and provide regular updates to ensure projects are on tracks
• Any other works as may be directed due to specific requirement of the projects

Job Requirements

• Bachelor's Degree in Mechanical Engineering or related fields
• Preferably 5 years of working experience in designs, supervisions and implementation
• Experience in engineering consultancy or construction industry would be an added advantage
• Able to multi-task and work in fast-paced environment

• Carry out Level 2 systems administration tasks, including system monitoring, management, disaster recovery, and capacity planning.
• Support the management of on-premises and cloud systems across Microsoft, AIX, Virtual (VMWare or Hyper-V), Amazon Web Services (AWS), Azure, and Microsoft 365 infrastructure such as Entra ID, Exchange Online, SharePoint, and Teams.
• Contribute to the design, setup, configuration, implementation, and deployment of new server environments and cloud technologies on Azure or AWS.
• Plan and allocate IT resources for tasks or projects, including budget preparation and capacity planning.
• Maintain and update technical documentation related to systems administration for on-premises systems, AWS, Azure, and Microsoft 365 cloud infrastructure.
• Perform system maintenance, upgrades, patch management, and resolve incidents during non-business hours as required.

Requirements

• At least 4 years of experience in system support and server administration, including implementing and managing cloud infrastructure, with a strong understanding of Azure and Amazon Web Services (AWS) cloud technologies.
• Practical experience in implementing and configuring Azure and AWS services such as virtual machines, application services, load balancers, SQL Managed Instances, site-to-site VPNs, storage solutions, networking, security, logging, and monitoring.
• Hands-on experience in managing on-premises environments, including Windows Server, VMware vSphere, and Hyper-V.
• Proficient in administering Microsoft 365 cloud technologies such as Exchange Online, Entra ID, SharePoint Online, Microsoft Defender, and Microsoft Intune.
• Familiarity with AIX/Unix systems and other IBM products (e.g., IBM WebSphere MQ, WebSphere, Tivoli Storage Manager Backup) is a plus.
• Relevant certifications in Azure, Microsoft 365, or AWS technologies (e.g., Azure Administrator Associate, Endpoint Administrator Associate, or AWS SysOps Administrator) are advantageous.
• Skilled in project and people management, capable of working both independently and collaboratively within a team.

To apply, please visit www.gmprecruit.com and search for Job Reference:24690

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Job Responsibilities

· Technical Support:Provide on-site technical support to customers, including troubleshooting, diagnostics, and repairs of hardware and software issues.

· Installation and Configuration: Install, configure, and test new hardware and software systems according to customer requirements.

· System Maintenance:Perform regular maintenance and updates on customer systems to ensure optimal performance and reliability.

· Customer Training:Train customers on how to use and maintain their systems effectively, including providing documentation and hands-on guidance.

· Issue Resolution:Respond promptly to customer inquiries and resolve issues in a timely manner, ensuring customer satisfaction.

· Documentation:Maintain accurate records of all work performed, including issue logs, service reports, and customer communications.

· Collaboration:Work closely with internal teams, including sales, support, and engineering, to ensure customer needs are met and to escalate issues as necessary.

Requirements:

Degree/Diploma in Computer or Electrical or Electronic Engineering or equivalent
Knowledge of programming in C,C++ are added advantages
Knowledge of embedded electronics fundamentals
Have knowledge of LoRaWAN and related IoT products are added advantages.
Have passion for exploratory testing and test automation are added advantages.
Able to work independently within tight schedule with positive disposition.
Excellent knowledge on Microsoft Office (Words, Excel & Powerpoint)
Fluent of English and Chinese in both speaking and writing

Key Responsibilities:

• Manage and optimize cybersecurity solutions including IDS/IPS, email defenses, EPP, DLP, vulnerability management, PAM (Cyberark, Beyondtrust), IAM/IGA, DAM, proxy, and NGFW.
• Oversee daily operations and security solution design, implementation, and documentation.
• Implement and refine cybersecurity solutions; ensure secure-by-design principles are followed.
• Support security incident response, containment, and recovery; conduct cybersecurity awareness training.
• Stay updated on industry trends and support team and cross-department needs as required.

Requirements:

• Degree/Diploma in Computer Science, Engineering, or Information Security.
• Experience administering solutions like Cyberark, Beyondtrust, Trendmicro, Tenable, and IMPERVA; strong knowledge of Linux, Unix, and Windows.
• Familiarity with scripting (Python, PowerShell) and AWS security operations; security and product certifications (e.g., GSEC, GCIA) are advantageous.
• Understanding of regulatory standards (MAS Cyber Hygiene, Technology Risk Management) and cybersecurity practices.
• Strong problem-solving, communication, and project management skills.

ALG is currently hiring Licensed Aircraft Engineers (B1) for our client based in Singapore. This role is an exciting long-term contract position with us.

Our client is renowned in the aviation industry for aerospace manufacturing, maintenance, repair, and overhaul of aircraft engines.

Job Responsibilities:

• Perform and certify aircraft maintenance tasks including inspection, repair, modification, and functional tests

Job Requirements:

• A CAAS license or an Aircraft Maintenance License, that is transferable to a Singaporean CAAS license; These include (but not limited to) – EASA, CASA, DCAM, etc.;
• Possess at least 2 type ratings, with a minimum of one of the following type ratings: A320, A350, A380, B747, B777, and/or B787
• At least five years of experience as an LAE; and
• Excellent interpersonal and communication skills (English proficiency in reading/writing)
• Good customer relationship skills

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R22105273