Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Maintain and enhance IT applicationemig new enforcements to the applications, troubleshoot five us to klerdily causes of the problerres and providing workable solution to fix thes

Design and develop IT in according to specificatiores provided.

Perform Berative prototyping te introduce and enhance new features to the cors system.

Perform design, programming Integration, system testing, mint users in Uber Acceptance Test (UAT), documentation

Generate unit tests and end-to-end test scripts to ensure nothing breaks upon deploying new features and maintain current automated scripts in Jenkins.

Troubleshoot, identify, solve issues and develop automated test cases to prevent similar issues

See through all enhancements and fixes to ensure they are property deployed to the testing and live environment within the agreed time. That includes working with the end users, server administrators, database administrators and the system analysts supporting the IT systema.

Experience and skills requirements

Degree in Computer Science, Information Systems, Information/Infocomm Technology.

Computer or Electronics Engineering or related discipline.

Must have minimurn 3 yours of working experience in this role and good experience in the following skills/technologies:

Web Application Client-side Technologies (eg. JavaScript/Typescript ESS/E ReactJS, React Hooks, Redux, jQuery, HTMLSICSS, AJAX/JSON, NPM)

Web Application Server-side Technologies (eg. Asp.NET Core, Asp NET MVC.

Web GIS Technologies (eg. ArcGIS JavaScript API, ArcGIS Server REST API, GeoServer, PostGIS);

Database technologies (eg. Postgresql, MS SQL, Oracle); and

Code version control system (Ga).

Other requirements

Must have good communication skills and the ability to

Understand and communicate in English, in speech and writing.

Work with other members in a dynamic and fast-moving team

Work independently with minimum supervision

Work on own initiative and adhere to deadlines.

Added advantage with the following

Development using Microsoft Azure Cloud and/or AIVS Cloud

Open-source technologies such as NodeJS, Leaflet, GeoServer, PostgresSQL, PostGIS

Knowledge of geospatial and mapping concepts such as spatial analysis and map projections with ESRI technologies.

Experience with geoprocessing using Python scripts and ETL tools such as FIME

Experience in agile development and DevOps processes.

To coordinate between Application and Infrastructure Teams to implement the Infra Requirements for Applications

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• Ensure Operating system, Middleware, Database performance ,Security /Bug fix patches , EOS and security (ISCD) compliance in accordance to the bank standards
• Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary
• Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability, replication and other key aspects
• Researching and recommending solution that best meet business needs and enterprise operational requirements
• Provide technical support to application development teams
• Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact

Qualifications

• Knowledge in Kubernetes, Docker, Jenkins, DevOps, Other Container platforms
• Knowledge in Linux OS, Wintel OS, MariaDB or Any Other databases
• Knowledge in Networking (F5 GTM/LTM or any other SLB)
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Experience in banking or financial services institutions preferred
• Will need to work in shifts and in weekends
• Team player to work with multiple teams and teammates

Kindly take note of the following details for shift work

Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)

Shift Timing

a. Morning shift 6am to 3pm

b. General shift 9am to 6pm.

c. Afternoon shift 2pm to 11pm

d. Night shift 10pm to 7am.

Need to support including night shift, weekends and public holidays

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects.

We are the makers of possible
BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.
Why Join Us?
A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.
To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.
Become a maker of possible with us!

Job Summary

The Injection Molding Process Engineer is a "hands-on" position that plans, directs, and coordinates manufacturing equipment and processes to produce high quality injection molded product. The Process Engineer is responsible for coordinating the molding efforts on new program launches, setting up and/or revising manufacturing processes and assisting the manufacturing operations in problem solving and continuous process improvements. While monitoring the effectiveness of processes this individual quantifies results, documents and presents findings to management and prepares reports.
This position also mentors and provides training to other injection molding personnel.

Job Description

1. Oversee molding production operations to meet requirements of Safety, Quality, Delivery, Cost and People (SQDCP).
2. Develop a robust Molding process by applying Scientific / Decoupled Molding techniques along with Design of Experiments (DOEs).
3. Implement and evaluate changes to existing processes designed to improve product quality, productivity and overall equipment efficiency (OEE).
4. Develop and maintain process documentation ensuring that processes and procedures are clearly stated and understandable for all employees. use Lean Manufacturing, Six Sigma, and other techniques to analyze process data to determine capabilities as well as improvement on OEE
5. Implement technical solutions including statistical methodology in continuous improvement to meet customer cost, quality, and delivery expectations.
6. Demonstrated ability to start-up, operate and shut down process related equipment. Must be able to work independently on new process development as well as troubleshooting current production issues and program robots and peripheral equipment
7. Work with equipment and material vendors to resolve machine and material issues.
8. Monitor and report issues with injection molds, make recommendations for refurbishment based on production factors such as cycles, process capability and tooling history.
9. Interact with customers to resolve issues and provide new project updates.
10. Facilitate and support facility and manufacturing safety, environmental, and ergonomics efforts.
11. Provide technical leadership and mentorship to process technicians, operators and other molding personnel.
12. Perform any other tasks as assigned.

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description

· Planning, implementing and monitoring work schedule to meet project completion targets

· Preparation of progress reports, construction method statements and technical proposal

· Handling technical and engineering issues

· Ensure inspection and conduct check on site works

· Liaison with client’s representative, relevant authorities and consultants

· Oversee the day-to-day structure works of the project and provide timely updates

Requirements

Degree in Civil or Structural engineering that is recognised by PE Board or Degree Qualification acceptable by BCA

The position holder is responsible for checking the engineering datasheets of designers when required, assisting the production team, and E & I contractor(s) in technical clarifications and solutions to solve site problems, and assisting the commissioning team to solve E & I engineering problems

Key tasks:

• Carry out testing of all aspects of industrial generators, control panels, synchronizing panels, and fuel pump panels to ensure the product works to its specification.
• Setting up test bench and equipment includes load bank test on generators
• Able to read and understand electrical and mechanical drawings/layout
• Require to generate factory and site test report
• Troubleshoot and diagnose problems and minor repairs during testing and commissioning
• Aliasing with project engineers/managers to schedule and coordinate works to tight deadline
• Supervising and leading junior staff
• Ensure a safe work environment at all times
• Any other related activities or responsibilities as assigned by superior

Job Requirements:

• Min Nitec / Higher Nitec / Diploma in Electrical or Mechanical
• Min 1-year experience in a related field
• Knowledge of genset controllers/PLCs is an added advantage
• Good Knowledge and experience of generators will be considered engineer role
• Possess a valid Singapore class 3 driving license

Personal Competencies:

• Good interpersonal and communication skills
• Able to work as a team as well as individual under limited supervision

Job Highlights:

• Positive working environment
• 5 Days Work Week
• Attractive job package
• Flexible Work Arrangement (FWA)
• Age-Friendly Workplace Practices

• IT Industry
• Monday to Friday 9 AM - 6 PM
• Working Location: Clementi
• experience in presales / strong knowledge in cybersecurity industry

Job Description

• Offer pre-sales technical support to customers and partners.
• Collaborate closely with the Sales team to formulate and position solutions
• Conduct cybersecurity solutions demonstrations.
• Carry out Proof of Concept for proposed cybersecurity solutions and Network Performance solutions.
• Collaborate with Solution Vendors on Business Solution Proposals, addressing RFI/RFP design, compliance, and clarifications.
• Develop design guidelines and propose enhancements to customers for the assigned cybersecurity products.
• Conduct in-house lab tests to validate customer proof-of-concept setups, endpoint/network designs, and deployments using new products and features.
• Provide training for internal Post Sales engineers and Partners on product/technology knowledge.

Requirements:

• Bachelor’s degree or Diploma in Cyber Security, Computer Science, Computer Engineering or related field
• Minimum 1 years working experience in Pre-Sales activities to large enterprise or government sector or related field
• Possess good technical knowledge in Internet architecture, network infrastructure, Software Define Networks, Network Performance tools and solutions, UNIX, Windows, VMware, Security covering Endpoint, Email, Web & Cloud.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Tiang Wan Ying

EA Personnel Reg. No.: R1767473

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

Geekplus is a global leader in mobile robotics technologies, providing innovative solutions for order fulfillment. With over 1,000 industry leaders using our systems, we deliver flexible, reliable, and efficient automation for warehouses and supply chains. Founded in 2015, Geekplus has more than 1,500 employees and offices worldwide, including in the US, Germany, the UK, Japan, South Korea, Mainland China, Hong Kong SAR, and Singapore.

------------------------------

We are looking for a Service Engineer to join our team. Are you someone who is driven by curiosity and craves a good challenge? Join us and be part of this exciting adventure!

What you have to do

• Serve as the site supervisor, overseeing and conducting relevant site activities during project implementation in the APAC region
• Collaborate closely with project managers, contractors, and suppliers to manage overall site performance
• Prepare daily on-site logs and records for customer and internal team reviews
• During the service phase, conduct preventive maintenance and perform root cause analysis of production issues using diagnostic tools
• Prepare a training manual and provide training and support to customers and other external parties

What you need to have

• A bachelor's degree in mechanical engineering or related disciplines
• Solid experience in equipment/hardware installation, maintenance, and site supervision
• Knowledge of Warehouse Management Systems, or other related logistics systems
• Proficiency in AutoCAD and Microsoft Office
• Good IT skills, including knowledge of network infrastructure, is a plus
• Frequent travel is required

------------------------------

What we offer

• Young and energetic work culture
• Opportunities for global mobility
• Double pay plus attractive performance bonuses
• Medical and dental coverage
• 14 to 21 days of annual leave
• Cozy office environment with refreshments
• Location: Tampines Plaza

If your qualifications, experience, and aspirations match our requirements, please send your resume with your current and expected salary to us. All information and materials submitted to Geek+ will remain strictly confidential and be treated for recruitment purposes only. Only short-listed candidates will be notified.

Responsibilities

· Creating and maintaining database standards and policies.

· Supporting database design, creation, and testing activities

· Managing the database availability and performance, including incident and problem management.

· Administering database objects to achieve optimum utilization.

· Defining and implementing event triggers that will alert on potential database performance or integrity issues.

· Performing database housekeeping, such as tuning, indexing, etc.

· Monitoring usage, transaction volumes, response times, concurrency levels, etc.

· Implementing security measures and frameworks, while ensuring compliance. Identifying, reporting, and managing database security issues, audit trails, and forensics.

· Designing database backup, archiving, and storage strategy.

· Installing upgrades and patches for Graph (Neo4j) or SngleStore

Requirements
•Experience driving major production incidents and organise incident retrospective meetings
•Experience with Unix System, MariaDB or MySQL or SingleStore or MongoDB or Oracle
•Experience with high availability, high-scale, and performant systems
•Experience with python and Unix scripting

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Project Engineer
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $4,000 + VB
• Duration: Permanent

Key Responsibilities

• Attend meetings with clients and conduct site surveys to ensure all specifications and site conditions are accurately understood.
• Compile and update project progress reports, status updates, delivery schedules, and activities weekly, communicating these updates effectively to the Project Director and Project Controller.
• Respond promptly to both internal and external emails to maintain clear and effective communication.
• Maintain rigorous documentation of all project stages and ensure all designs submitted comply with client specifications and requirements.
• Continuously nurture and develop relationships with clients to ensure long-term cooperation and satisfaction.

APPLY NOW!!!

• Diploma in Electrical Engineering or an equivalent qualification with at least 1 year of experience
• Proficiency in AutoCAD and Microsoft Project is desirable
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70250 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job description:

• Coordinating with all related stakeholders
• Coordinating & supervising works & site activities based on systems & engineering design
• Making sure Mechanical & Electrical job is done based on micro-schedule and master programme
• Ensuring Mechanical & Electrical job complied to specifications, drawings, & authority codes
• Diploma in mechanical engineering or above
• Mechanical & Electrical Engineer experience in construction industry
• Familiar with AutoCAD & Microsoft office

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Responsibilities & Requirements:

• Well versed in local building projects will be an advantage.
• Strong design capability, high level of creativity and good presentation skills and project management.
• Knowledge of local authority requirements.
• Proficient in AutoCAD, Sketchup, Revit and/or ArchiCAD.
• Minimum 2 years post graduate experience.
• Master or Bachelor of Architecture equipvalent (Recognised by BOA Singapore).
• Working schedule: Mondays to Fridays, 9am-6pm.
• Location: Central, Singapore

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Specific
- Handle full sets of accounts including preparation of General Ledger, AP, AR, Balance sheet, and P&L for monthly and yearly reporting in CHINESE
- Responsible for daily transaction posting (AR/AP/Others) and all finance operation matters
- Handle receipts, payments, claims, and records into the accounting system on a timely basis
- Maintain monthly and yearly schedules for management and audit
- Bank reconciliation reports and monthly reconciliation of company balances
- Assist in budgeting and forecasting activities to align the strategic goal of the company
- Support on queries from external auditors and tax agents

- Internal stock take

- Handle financial year end reports
- Any other ad-hoc duties as assigned

Requirements
- Degree/Diploma in Accounting, Finance, or related field
- At least 2 years of relevant work experience handling full set accounts
- FMCG experience will be preferred
- Strong understanding of accounting principles
- Good working knowledge in Excel
- Possess initiative and ability to multitask
- High level of accuracy, efficiency, and accountability
- Requires to communicate in Chinese with Chinese speaking co-workers and clients

- 5 days work week

Interested and suitable candidate kindly click quick apply. Resume will be forwarded to Stepfan Soon Yit
We regret that only suitable candidate will be notified.

GEMS Recruit/EA License : 23C1459
EA Personnel No : R24120893 (Stepfan Soon Yit)

Company Description

The Talent Network Pte Ltd is formed by a young, experienced and dedicated professional in Recruitment and Headhunting industry. Our two-way visions & missions is to source for the best-fit candidate in term of both soft and technical skills for our clients and at the same time, helping our candidates to build a path toward a successful career journey.

Role Description

This is a full-time hybrid role for a Recruitment Consultant at The Talent Network Pte Ltd. The Recruitment Consultant will be responsible for 360 recruitment, managing end-to-end recruiting activities which include dealing with both clients and candidates. This role is based in Singapore with flexibility for remote work.

Requirement

• Min a diploma or degree in Human Resources, Business Administration, or related field
• Salary compensation according to experience
• Candidates without experience but with strong passion in recruitment are welcome to apply. Comprehensive training provided.
• CEI certified. Candidate without certification will be send for course and test.

Others

• Working location: Central
• Salary: $ 3,000.00 to $ 8,000.00

Interested candidates can also send your CV to [email protected]

Our client, a MNC in Freight Forwarding industry is seeking for a Freight Manager ( Documentation ) - $ 8,500.00 + AWS + VB / MNC / CENTRALWEST AREA

Requirements

• Degree or Diploma in Logistics / Supply Chain or relevant
• Min 7 to 8 years experience overseeing a team of 10 to run a Sea / Ocean Freight Export Operation for key account clients
• Extensive background in Freight Forwarding industry (Agent environment)
• Strong experience in Shipping, Booking and full Documentation functions
• Strong leadership skill
• Possess good communication & interpersonal skills

Others

• Salary: $ 8,500.00 + AWS + VB
• 5 days work week, office hour
• CentralWest area

Interested candidate can your resume (preferably word format prefer) to [email protected]

Responsibilities

• Manage day-to-day sales operation
• Sales Order Processing: Quotation, Sales Order, Purchases Order, Delivery Order, Invoicing
• Professionally handle high volume of inquires and assist to provide effective solution for customers’ issues
• Provide excellent support and customer-service
• Connect with key customer contacts (external) as needed
• Coordinate projects and support lead manager
• Ensuring projects are worked according to agreed plan and kept on schedule
• Liaise with internal teams such as Finance, Procurement, Logistics and Marketing
• Assist in preparation & submission of relevant reports and documents

Requirements

• Diploma in Business or related field
• Minimum 1-2 Year(s) of working experience
• Ready for dynamic and fast-paced environment
• Strong phone presence, interpersonal & customer service oriented
• Enjoying interacting and communicating with people, and maintain good rapport with our IT Business Partners
• Proficient in MS Office
• Working schedule of 9am-6.30pm (Mondays to Fridays)
• Kaki Bukit, Singapore

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.
GEMS Recruit/EA License: 23C1459
EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Roles & Responsibilities:

• Maintain cleanliness and good condition of the vehicle
• Perform the job assigned by operation team
• Report any accidents, violations or detect to office
• Possess adequate knowledge of the Land Transport Authority (LTA) and traffic rules to ensure compliance
• Transport staffs, workers, passengers in a safe and sound manner

Requirements:

• 3 years of driving experience in Singapore
• Valid class 4 driving license
• Valid BDVL (Vocational License)
• Possess a good working attitude

OT available

6 days work week

Interested and suitable candidate kindly click quick apply. Resume will be forwarded to Stepfan Soon Yit

We regret that only suitable candidate will be notified.

GEMS Recruit/EA License : 23C1459

EA Personnel No : R24120893 (Stepfan Soon Yit)

Roles & Responsibilities:

• Maintain cleanliness and good condition of the vehicle
• Perform the job assigned by operation team
• Report any accidents, violations or detect to office
• Possess adequate knowledge of the Land Transport Authority (LTA) and traffic rules to ensure compliance
• Transport staffs, workers, passengers in a safe and sound manner

Requirements:

• 3 years of driving experience in Singapore
• Valid class 4 driving license
• Valid BDVL (Vocational License)
• Possess a good working attitude

OT available

6 days work week

Interested and suitable candidate kindly click quick apply. Resume will be forwarded to Stepfan Soon Yit

We regret that only suitable candidate will be notified.

GEMS Recruit/EA License : 23C1459

EA Personnel No : R24120893 (Stepfan Soon Yit)