Assistant Engineer x 8 (No experience required, office hrs)

(Gov project, stable role)

Singaporean Only, security clearance required

Salary range:

• Basic Salary $2800 - $3500 + Site Allowance + Standby Allowance + Bonus + Other Benefits

Responsibilities:

• Perform Preventive & Corrective maintenance work involving fault troubleshooting, diagnosis & replacement of equipment/ component at permanent sites
• Perform testing of equipment
• Provide troubleshooting to technical problem on communication system

Requirements:

• Higher Nitec/ Diploma in Electrical/Electronics, Communications/ Computer Engineering/ System Engineering or InfoComm Technology
• Training will be provided
• Able to perform standby duties (based on roster)

Additional Information:

• Stable role, Government Project (Singaporean Only)
• Working hours: Office Hours (Mon – Fri)
• Location: Near Paya Lebar/ Tampines/ Bedok

Interested applicants simply email your resume to: [email protected]

We regret to inform that only shortlisted applicants will be notified.

Responsibilities

· Responsible for installation, commissioning, maintenance, and repair of current installed base of XRD & XRF for APAC.

· Troubleshoot, diagnose customer problems, and coordinates appropriate corrective action directly.

· Conform always to Malvern Panalytical and customer’s safety, cleanliness, and working protocol policies to maintain a safe and clean work environment.

· Ensure that guidelines and standards of work expected by Malvern Panalytical are understood and met.

· Carry out preventative maintenance activities to installed base as per factory guidelines.

· Provide Service Support and basic training after installation.

· General Service administration activities and report submission.

· Responsible for proper spare part handling per internal procedures.

Requirements

· Diploma Electrical Engineering & Mechanical Engineering, Physics, or related education. Knowledge of Chemical Engineering, Chemistry, Chemical, Electronics, Mechanics preferred.

· 2~3 of experience in maintaining analytical instruments or semiconductor equipment is preferred.

· Able to travel both domestically and internationally on short notice.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Salary : SGD4,000 - SGD 5,000 + Commission
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Job requirements

• With relevant experience, preferable with Semiconductor industry
• Cert /Nitec / Diploma in engineering background
• Possess own transportation is an added advantage

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Maintenance Engineer | Up to $4k | 5 Days | Tuas

Location: Tuas Avenue 6
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Job Description:

• On behalf of the Owner’s Engineer (OE), the T&C Lead Engineer shall support the T&C Manager for overseeing all testing and commissioning activities of the IWMF Contractors, including the coordination of testing and commissioning activities of TWRP that interface with IWMF.
• The T&C Lead Engineer shall support the T&C Manager to lead the OE’s proposed testing and commissioning team and coordinate with its Resident Site Supervision (RSS) Team and OE’s design team as well as the Contractors to review the development of the Contractors testing and commissioning plan and the Contractors execution of their plan in order to achieve the Project milestones for each of the IWMF EPC Contracts (EPC Package 1 – Waste to Energy/Materials Recovery Facility and EPC Package 2 – Sludge Incineration Facility/Food Waste Treatment Facility).
• The T&C Lead Engineer shall support the T&C Manager to oversee the whole of each Contractors testing and commissioning activities, and the interfaces between EPC1 and EPC2 and TWRP as relevant, which should commence from dry/cold to hot commissioning to successful completion of entire commissioning process and trial run, including optimisation of plant operation with the Contractors and O&M teams.
• Participate as required by the T&C Manager in regular T&C Coordination Meetings with the Contractor and/or Other Contractors on adjacent sites (that is attended by Client representatives or similar others also)
• Any other matters that may from time to time be delegated by the T&C Manager.
• The OE’s T&C Lead Engineers are estimated to be mobilised to site at least 6 months prior to the commencement of actual testing and commissioning by the Contractor in order to familiarise themselves with the Works and the Contractors plans for the T&C and the expectations of the Client.

Job Requirements:

• The T&C Lead Engineers shall have at least 5 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.
• The T&C Lead Engineer to have a relevant engineering degree or certification.

Job Title: R&D Engineer - Electrolyte (Battery Material Research Division)

Location: NTU-Durapower Advance Lithium Battery Joint Lab #02-01, 1 Cleantech Loop, Singapore 637141

Overview:

We are seeking dedicated R&D Engineers specializing in electrolyte development to join our dynamic Battery Material Research Division. This role focuses on advancing high silicon-based projects, optimizing electrolytes for high-voltage, high-power, and high-safety applications, particularly in the realm of solid-state battery technology.

Key Responsibilities:

· Electrolyte Formulation: Lead and contribute to the development and optimization of electrolyte formulations tailored for high silicon-based battery projects, emphasizing enhanced performance, safety, and stability.

· Integration of Silicon Anodes: Collaborate within multidisciplinary teams to effectively integrate high-capacity silicon anodes into battery systems, addressing challenges related to volume expansion, cycling stability, and interface engineering.

· Experimental Design and Analysis: Design and execute experiments using coin and pouch cell configurations to evaluate and iterate on electrolyte performance. Analyze data to inform the enhancement of battery characteristics.

· Collaborative Research Initiatives: Work closely with cross-functional teams, including materials scientists, physicists, and mechanical engineers, to drive innovation in battery technology. Contribute actively to the advancement of solid-state battery research.

· Documentation and Reporting: Maintain meticulous records of experimental procedures, results, and analysis. Prepare technical reports and presentations contributing to scientific publications or patents.

Requirements:

· Bachelor's degree or higher in Material Science, Physics, Mechanical Engineering, or related fields.

· Proficiency in electrolyte chemistry and its significance in battery performance.

· Strong grasp of battery materials, with a focus on high silicon-based projects.

· Prior experience or demonstrable skills in experimental design and hands-on work with coin or pouch cell fabrication and testing.

Preferred Skills:

· Prior exposure in Project & R&D laboratory setting

· Experience or exposure to solid-state battery technology and solid electrolytes.

· Familiarity with software tools for data analysis and simulation in battery research.

· Any prior experience in industrial R&D, especially in battery or energy storage-related projects, would be advantageous.

· Knowledge or exposure to characterization techniques (e.g., impedance spectroscopy, SEM, TEM, X-ray techniques) is advantageous but not mandatory.

This role offers an exciting opportunity to contribute to cutting-edge research in battery materials, particularly in harnessing the potential of high silicon-based projects and advancing the development of next-generation solid-state batteries. Join us in shaping the future of energy storage technology!

Salary: $3,400 - $3,800

Location: Ang Mo Kio/Yio Chu Kang

Key Responsibilities:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects and contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Key Requirement:

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• 3 - 5 years experienced
• Experienced in ACMV & LTA/SMRT
• Soft skills including a positive attitude, flexibility and conflict resolution

WhatsApp me wa.me/6585125305 for a prompt response to your enquiry!

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please by notified that only shortlisted candidates will be informed.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Project Sales Engineer

Salary: $3500 - $6000

Working Days: Mon - Fri (8.30AM to 5.30PM)

Working Location: Tuas

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

(2 years contract renewable)

5 days, 8.30am- 5.50pm

Salary: $2800- $3000 + allowance

Location: East, and clients site whenever required

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Diploma in Mechanical/Electrical Engineering
• Experience working in machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc)

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Duration of contract: 1-Year (likely to renew)

Location: Gul Circle

Shuttlebus provided from: JE, CCK, Outram, Bedok, BoonLay MRT

Working hours: 8.15am to 5pm

Completion bonus: 1-Month (Subjected to Company's discretion)

Responsibilities:

• Serve as Level 2 support and primary contact for Client Services (CS) at Singapore sites.
• Troubleshoot ServiceNow tickets for Singapore and SEA regions; assist SEA teammates as needed.
• Provide onsite and remote support for users.
• Manage IT tasks including PC deployment, Cisco IP phone replacement, email setup, laptop reimaging, and printer issues.
• Oversee IT services such as Depot operations, asset management, annual disposals, procurement, and onboarding/separation processes.
• Conduct IT orientation for new hires, support IT projects, and assist with technology rollouts.
• Escalate Level 3 issues to relevant specialized teams.
• Act as the first contact for IT issues in Singapore, coordinating with service providers as required.
• Support the annual PC refresh and hardware-related tasks for Singapore and occasionally the Philippines.

Requirements:

• 1-2 years of experience in IT operations, support, or helpdesk roles.
• Proficient in IT infrastructure, hardware (desktops, laptops, servers), and software (OS, applications).
• Skilled in PC setup, troubleshooting hardware/software/network issues, and using IT ticketing systems like ServiceNow.
• Knowledgeable in Microsoft 365, Windows 11, and optional familiarity with mobile device management (MDM).
• Willingness to travel to sites when required.

Ong Zi Qi (R2412333I)

EA License no.: 05C345I

• Well Established Company
• Basic $3200 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working days: Monday to Friday
• Working hours: 8am to 5pm

Job Responsibilities:

• To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance
• To monitor the safe process flow and backlog level of TIW waste
• Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs
• To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services
• To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost
• Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions
• Lead the daily safety toolbox meeting and regular inspection of PPE items that staffs at workplaces are enough for their safety
• Conduct periodic review of existing procedures and workflow of plant operations and functions in lines with cost effectiveness with maximum throughput
• Apply continues improvement or modification plans to maintain an excellent operational model.
• Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management
• To ensure EHS compliance through the continual maintenance and improvement of ISO 45001 implementation, and always maintain good housekeeping of site
• To prepare and analyze daily and monthly operation records/reports (e.g., cost, productivity, quality, non-conformance, etc) on plant processing and maintenance. And follow up necessary corrective actions and monitor consistently to relevant department staffs to follow up closely
• To compile annual budget of plant operations and Maintenance for Director’s approval and to ensure expenditures are well within the budget allotment
• To work closely with operation staffs and engineering staffs to develop and implement preventive maintenance schedule for operations and maintenance of machinery and equipment
• Regular briefing / training to be conducted to department staffs for safety handling of repacking loose waste, MSDS, PPE requirement and risk assessment before operations
• To activate emergency response team of operation and maintenance staffs and response to any in house spill and fire incident if in case of emergency
• To liaise with EHS department to ensure fellow dept staffs are upkeep with method of handling and emergency equipment usages in terms of spills and fire incident and to conduct regular practice and drill exercises with different scenarios to workers so that they are well familiar in emergency to response in time

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Senior/Electrical Engineer (A1 main contractor/M&E)

Our client, a prominent A1 main contractor with an impressive portfolio of building projects, is currently seeking Senior/Electrical/M&E Engineers to join them for an iconic CBD institutional building project to support their ongoing contributions to Singapore’s iconic developments.

What you will do:

• Oversee and coordinate all M&E aspects of the project
• Responsible for monitoring consultants’ designs, including managing the drawing schedule, coordination & providing support in identifying any areas of improvement
• Work closely with clients, consultants and subcontractors to ensure that project objectives and schedules are achieved timely and accurately
• Liaise with the BIM modeler/drafter regarding drawings preparation and provide technical expertise when necessary to ensure drawings are completed accurately
• Collaborate with cross-functional teams in ensuring smooth project execution and resolve any technical issues that may arise.

What you will need:

• Minimum degree in Electrical Engineering
• Minimum 2 years of relevant M&E experience in the construction industry
• Candidates with strong experience with building projects with A1 main contractors/consultancies are highly desirable

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

about the company

Our client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines
• Prepare, setup and qualify machines
• Machine assembly
• Setting up of AOI machines
• Machine alignment, teaching and testing

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Clean room environment experience will be a plus
• Assembly & troubleshoot semiconductor equipment
• AOI machine troubleshoot & assemble experience will be a plus
• Training given to candidates with no experience
• 5 day work week (Mon to Fri 9am-6pm) + OT if required

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job.

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Location: Tuas ($110/ month for transport allowance)

Mon - Fri 830am-530pm

1 year contract / Permanant

Job Description:

• Plan and execute corrective and preventive maintenance on facility and production equipment.
• Implement TPM programs, including autonomous maintenance and spare parts management.
• Coordinate with external vendors for service contracts and maintenance.
• Support EHS and audit activities.

Key Responsibilities:

1. Perform maintenance and document equipment and facility activities.
2. Manage spare parts inventory, support continuous improvement, and conduct ISO audits.
3. Ensure EHS compliance and participate in inspections.
4. Troubleshoot equipment issues and find quick solutions.
5. Coordinate with contractors for maintenance and ensure quality work.
6. Conduct site inspections and manage corrective actions.
7. Troubleshoot with electrical diagrams and mechanical drawings (3+ years experience).
8. Evaluate contractors and negotiate quotations.

Interested applicants may email resume to [email protected]

Jessie Hoe Huey Miin (CEI Registration No: R1103861)

Recruit Express Pte Ltd (EA: 99C4599)

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Product area

Google's network provides services to millions of Internet users around the world. Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale. Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered. We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning.

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Build and operate Google's network reliably and at scale.
• Primary focus will be delivering Infrastructure capacity for APAC region.
• Responsibilities include design, planning, and installation support for optical transport.
• Beyond day-to-day responsibilities, you'll also work with more senior engineers to develop creative approaches for keeping operational costs low through tooling and process improvements.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 3 years of experience in Dense Wavelength Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience in Troubleshooting of DWDM systems and topology and architecture.
• Knowledge of fiber types and their application; physical fiber characteristics; and standard testing tools Optical Spectrum Analyzer (OSA), Bit Error Rate Test (BERT), Optical Time Domain Reflectometer (OTDR).
• Understanding of networking and fundamentals of network troubleshooting at Layer1.
• Understanding of network transport design, equipment and infrastructure.
• Excellent written and verbal communication skills.

Our client, a well-established MNC is seeking for a Logistics Driver (Delivery) - salary up to $ 4,000.00 + OT + Attractive Bonuses - 3 openings

Requirements

• At least 3 years experience making delivery to island wide
• Possess class 3 driving and comfortable to drive a van
• Independent, confident and perseverance

Others

• Salary: up to $ 4,000.00 + OT + Attractive Bonuses
• Working hour: Office hours

Interested candidate can send in your resume with a photo attached (word format prefer) to [email protected]

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

2 years contract basis (upon expiry of contract, extension or conversion based on performance)

Responsibilities:

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare, infrastructure, LTA etc
• Project management, design and development
• Liaise with clients, consultants and contractors
• Ensure compliance with local codes and regulations
• Confidently administer the contract and effectively manage the project/design team
• Coordinate and carry out tender, evaluation, recommendation and award processes
• Proactively identify and resolve technical coordination
• Keep updated on contractual and authorities' requirements
• Nurture, coach and upgrade skill levels of team members

Requirements:

• Architectural master/degree recognized by Board of Architects Singapore (BOA)
• Minimum 10 years post graduate experience
• Familiar with BIM and Authorities submission processes and guidelines
• Proficient in Autocad, Revit, Sketchup
• 5 days work week, Mondays to Fridays (Central, Singapore)
• All company benefits will be the same as a permanent staff (there is no bond to be served for the 2 years contract)

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Responsibilities:

• Lead/Manage the project team to complete projects on time, on budget and according to client and authority's requirements
• Manage multiple projects concurrently from design stage to project completion
• Drive continuous improvement for architectural services by reviewing current workflow practices together with management
• Establish good working relationships with different parties to promote continued partnerships
• Support the procurement of new business
• Mentor and supervise the training and development of the team

Requirements:

• Min. 5 to 10 years' relevant experience as project architect
• Possess a Degree in Architecture or accreditation with Professional Bodies of equivalent standing such as the Board of Architects (BOA)
• Experience in AutoCAD, Revit, Lumion, Sketchup, Photoshop, Enscape
• Experience in delivering projects from concept to completion of construction
• Experience in private and public residential project in Singapore will be an advantage

Other information:

• Central, Singapore
• Mondays to Fridays, 9am-6pm

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Responsibilities

• Ability to lead the team and assist in preparation of BIM model and content for BIM Coordination meetings
• Adhere to BIM execution plan and project workflow criteria under the direction of Architect incharge
• Support project team and efficiency in workflow to achieve BIM deliverables as per requirements timely
• Leveraging BIM software and tools as a methodology to coordinate design documentation
• Assist in updating BIM standard and template for the project
• Be familiar with BIM submission, regulations and guidelines
• Provide guidance and conduct in-house BIM training to other team members
• Develop discipline specific BIM modelling content

Requirements

• Degree in Architecture or equivalent from any recognised tertiary institution preferred
• Specialist Diploma in BIM
• Minimum 5 years relevant working experience in building construction (Architecture), Singapore
• Good knowledge of Authorities' requirements and overall project process
• 5 days work week, Mondays to Fridays
• Working location: Central, Singapore

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Roles and Responsibilities

• Manage existing internal digitalization and/or process improvement projects in the commercial area
• Review current commercial side process and identify pain points for improvement with detailed solution
• Coordinate to set up new projects with related parties
• Mid and long term planning of ONE digital strategy especially for commercial area
• Provide support to management as and when required

Requirements

• Minimum Bachelor Degree in relevant discipline
• Experience in managing a team and international projects with various stakeholders
• Logical thinking with open-minded communication
• Strong analytical and problem solving skills
• Comfortable in working in a fast paced, growth-orientated environment
• Experience in living and working in different countries would be an advantage

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Lead technical team in BIM operations from setting up of project to modelling to troubleshooting of model issues to ensure timely delivery of BIM model for Client’s design reviews, statutory submissions and tender documentation
• Develop project BIM execution plans, coordinate and resolve issues arising from BIM operations with other consultants
• Ensure quality and standard of BIM workflow and deliverables are met by the project team
• Review all BIM supporting infrastructure & software of the office and recommend improvement plans
• Responsible for supervising and training of BIM department
• Setting up of Corenet X workflow within the office

Requirements:

• Minimum 8-10 years’ relevant experience
• Certificate from BCA BIM modelling course or equivalent
• Diploma or Degree in Architecture / BIM or equivalent
• Demonstrate ability to follow instructions and execute and adapt to new process procedures and workflows

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

The Opportunity

• Opportunity to work with MNC Client
• 5 days' work week, Office Hours
• Working location: Changi

Key Responsibilities:

• Lead the design and deployment of Cisco Firepower solutions (FMC and FTD) for network infrastructure projects in alignment with the client’s business objectives and technical requirements as detailed in the SOW.
• Integrate Cisco Firepower solutions with the broader network architecture, ensuring secure communication, optimal performance, and compliance with internal and client-specific security protocols.
• Provide expert-level guidance and hands-on support for troubleshooting, optimization, and ongoing management of Cisco Firepower devices, including FTD and FMC.
• Work with project managers, cross-functional teams, and clients to ensure all network security configurations meet the scope and deliverables as outlined in the SOW. Participate in client meetings to assess and refine network requirements.
• Ensure that network solutions are delivered on time, within budget, and meet the technical specifications outlined in the SOW. Track progress against project milestones and provide updates to stakeholders.
• Develop comprehensive documentation for network designs, configurations, change management, and troubleshooting processes. Provide detailed network performance reports to internal teams and clients.
• Continuously assess and optimize the Cisco Firepower infrastructure, focusing on performance, security, and redundancy.
• Mentor junior engineers, sharing knowledge and fostering a culture of continuous learning within the network engineering team.
• Ensure all network solutions align with industry security standards and best practices, including regulatory requirements outlined in the SOW

Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field (or equivalent experience).
• Minimum of 5-7 years of network engineering experience, with experiences specializing in Cisco Firepower solutions (FMC and FTD).
• Expertise in designing, deploying, and managing Cisco Firepower firewalls, including Firepower Threat Defense (FTD) and Firepower Management Center (FMC).
• Solid understanding of network protocols, routing, switching, VPNs, and network security best practices.
• Experience with network performance optimization and troubleshooting in enterprise environments.
  • Cisco certifications such as CCNP Security, CCIE Security, or equivalent are highly preferred.
• Excellent communication skills with the ability to explain complex network and security concepts to both technical and non-technical stakeholders.
• Ability to manage multiple projects and priorities while ensuring delivery according to the requirements in the SOW.
• Strong problem-solving skills and ability to work independently in a fast-paced environment.

Next Step

Prepare your updated resume and expected package.

Simply click on 'Apply here' or email to [email protected] to drop your resume

All shortlisted candidates will be contacted.

Prasant Sirohi

EA Licence Number: 91C2918

Registration Number: R22106307