Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

You will be joining a global tech giant. This role focuses on providing technical troubleshooting support to leading app publishers in Greater China through multiple channels (WeChat, Email). You will assist Account Managers in addressing technical inquiries and gain expertise in mobile app monetization, specifically with ad products like AdMob and Firebase.

Responsibilities:

• Build expertise around mobile app ad monetization products and implementations (Android, iOS, Unity)
• Troubleshoot Technical issues from App Developers
• Assist Sales Team on Product and Technical related questions

Mandatory Skills/Qualifications:

• Bachelor's degree in Computer Science or related technical field or equivalent practical experience.
• 5+ years experience Mobile Development Skills (iOS/Android/Unity)
• 5+ years experience of Technical Troubleshooting Experience
• Ability to collaborate with engineers and translate technical concepts to non-technical audiences (and vice versa).
• Ability to speak and write in Mandarin and English fluently and idiomatically

Preferred Skills/Qualifications:

• Experience with Firebase (Analytics, Remote Config, A/B Test)
• Experience in Ad Tech Industry

Coordination of structural works during construction process

Attending site meeting with contractor and other consultants.

Attending site issues, timely replies to RFI, coordinating VO (if any), material costing and estimation

Liaise closely with internal and external parties as well as the authorities to resolve structure design discrepancies and construction issues

Attending technical and project coordination meeting with various disciplines.

Manage and resolve production, quality, design & engineering and schedule issue

Plan, design and supervise C&S Engineering works on HDB Projects, ensure all engineering works comply with relevant statutory standards, regulations and Codes of PracticeCoordination of structural works during construction process

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

Responsibilities:

• Develop and execute API/UI/Functional tests with CI/CD.
• Design, develop and maintain automated test framework, tools and test cases
• Work in a scrum team of software developers and domain experts. Accountable for quality of the software product under development.
• Perform manual testing when necessary.
• Software release following SGLC guidelines. Collaborate with peers to identify opportunities for process improvement.
• Participate in design and code reviews
• Learn, grow and have fun with highly capable engineers and scientists from various disciplines in a global R&D team

All listed tasks and responsibilities are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Who we are looking for:

• Strong understanding in automated testing using at least one programming language, such as Python, Java, C#, TypeScript or JavaScript
• Strong understanding in Linux Shell scripting or equivalent command line tools
• Knowledgeable with software test methodologies such as API, Web, GUI, performance testing, with hands-on experience in frameworks and tools such as Karate, Cucumber, Gherkin and Playwright
• Strong analytical capabilities and able to troubleshoot complex issues
• Good knowledge with CI/CD tools such as Jenkins, TeamCity, GitHub Actions
• Strong understanding in databases such as MySQL or PostgreSQL, cloud computing such as Amazon Web Services and Docker/Kubernetes is a plus
• Solid understanding of SDLC processes
• Be curious, detail oriented, and analytical, with a proven ability to learn quickly
• Proactive and team-oriented with strong collaboration skills; comfortable working across functions and time zones

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities.

Preferred Experience/Education:

• Typically requires a minimum of 0 - 2 years of related experience with a Bachelor’s degree
• Experience in biotech and bioinformatics is a plus

• Serving as the first point of contact for Client end users seeking technical assistance over phone, email, MS team and ticketing system and updating all cases reported into the Client ticketing system.
• To configure, install, support, and maintain IT hardware and software – PCs, laptops, and mobile devices, printer/copiers. Windows operating systems, applications software.
• To support Meeting Room Tablet, Projector, Telephone, Cabling and Audio Video (AV) System.
• Record events and problems and resolutions in Client ticketing system.
• Coordinate with Client IT Department to plan and implement software upgrade and OS installation or hardware tech refresh on PCs, laptop, and mobile devices.
• Day to day management of the helpdesk – dealing with cases from inception to competition
• Required to monitor and update Client IT Asset Management System
• Required to attend Client end-users within Client premises.
• Client IT Environment require support is inclusive of: -
  • Install and troubleshoot Windows & No Windows Applications
  • Account Administration
  • End User Support
  • Setup / Troubleshoot Laptop / Desktop / Printing / Meeting Room facilities /Video Conference System
  • Multi-purpose hall Sound System
  • PC inventories & Bi-monthly stock take
  • Skype / MS Team Voice
  • Software Management: Endpoint Central / Intune
  • Microsoft Defender
  • VPN Solution
  • In-house escalation to Level 2/3 Support. Hardware Tech Refresh – Windows 11 Migration, Autopilot implementation

• Hybrid Working Arrangement
• Flexi-Working Hours
• Great Career Advancement

Accountabilities and Tasks

Firmware Development

• Design, coding, testing and debugging of firmware and applications.
• Develop customized firmware based on end-users requests or requirements.
• Support customers’ queries or feedbacks pertaining to firmware-related issues.
• Perform technical review and adherence to coding standards and recording them into documentation.
• Provide mentoring and training to the Research and Development (R&D) team members.

Job Requirements

• Education level: Minimum Diploma or Bachelor Degree in Computer Science, Electrical Engineering, Elecronics Engineering or equivalent.
• Working experience: minimum 5 years of relevant experience in firmware development using C / C++ programming language is highly preferred.
• Prior experience in performing scripting test or test automation is highly advantageous.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs)
• Support the review and revision of design document, wherever required
• Liaise with identified stake holders, including suppliers/contractors
• Provide SME input wherever required
• Manage the assigned system handover
• Support the management of project schedule
• Compliant to quality and safety requirements
• Complete trainings in a timely manner
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Requirements:

• Minimally a Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 7 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices
• Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail
• Proficient presentation and facilitation skill is a plus

Job Description & Requirements

1)Ensure contractor carries out daily works that follow specification and regulations.

2)Monitor quality of precast components for daily production and delivery.

3)Ensure daily production and deliveries are able to cope with site schedule and progress.

4)Inspect all new mould and ensure is ready before proceed for casting of new component.

5)Monitor daily production records and delivery records.

6)Daily inspection for pre-pour of pre-cast component and finished products’ delivery.

7)Planning and schedule for daily production works.

8)Ensure that daily production works are carried out by using latest drawing.

Any other ad-hoc duties assigned

Singaporean / Singapore PR only

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

Joreen Hung | Reg No.: R24119971

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure preferred

Joreen Hung | Reg No.: R24119971

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

· Checking plans, drawings and quantities for accuracy of calculations:

· Ensuring that all materials used and work performed are as per specifications:

· Liaising with contractors, supervisors, quantity surveyors and the general workforce involved in the project:

· Day-to-day management of the site, including supervising and monitoring the site labour force:

· Planning the work and efficiently organizing the plant and site facilities in order to meet agreed deadlines.

· Overseeing quality control, health and safety matters on site.

· Preparing VO and other reports as required.

· Other related duties, as assigned

Job Requirements:

- Diploma / Degree , related in Construction
- At least 2 years related working experience in Building Construction

- Bilingual in English and Mandarin in order to communicate and engage with Mandarin speaking customers.

- Willingness to learn & committed to accomplish datelines

Duty and Responsibility

1. Procurement engineers oversee the purchase of technical equipment for industrial operations.
2. They collaborate with designers/Site to determine the equipment needed to complete manufacturing or construction projects according to specifications, research vendors for that equipment, then order it.
3. These engineers negotiate purchase agreements with vendors and award contracts to vendors for equipment.
4. They also monitor any adjustments to the equipment needed to maintain an optimum supply of equipment to complete projects on time and within budget.
5. A procurement engineer must possess high-level organization and record-keeping skills to maintain a consistent flow of equipment to the company’s factories or worksites and ensure vendors are fulfilling the terms of their contracts. Influencing and negotiation skills are also crucial for procurement engineers, as it’s up to them to negotiate the purchasing agreements for engineering equipment and hire vendors for projects.

Requirement

At Least have 5 years Construction Sector

Experience

Good communication skills to liaise with associates, clients, Supplier, government authorities.

Good team player

Job Title: Systems Engineer for Managed IT Account Management Services

Job Responsibilities

Administer all aspects of account management for applications, including but not limited to:

Windows Active Directory

Entra ID/Azure AD

Clinical System

Finance ERP System

Biomedical System

CRM System

IRIS System

Maintain accurate and comprehensive documentation for all access creations, modifications, and deletions.

Develop and maintain Standard Operating Procedures (SOPs) for account management processes (e.g., onboarding, offboarding).

Manage the User Access Matrix, ensuring its accuracy and liaising with stakeholders to validate it.

Conduct regular User Access Matrix reviews with stakeholders.

Adhere to SOPs for all account management procedures.

Assist in account and access management audits by providing supporting documentation and audit log tracing.

Perform bi-annual access reviews for various systems.

Troubleshoot permission issues for systems and escalate to system owners when necessary.

Handle other ad-hoc duties and IT administrative tasks as required.

Key Capabilities and Skills Required:

Basic understanding of Microsoft Active Directory.

Strong knowledge of user account management.

Basic skills in troubleshooting permissions.

Intermediate communication skills, with the ability to effectively liaise with stakeholders.

Attention to detail and meticulous work habits.

Availability to perform user access modifications on Sundays for staff transfer cases.

Responsibilities :

• Support the technical team and construction team for all design matters.
• Review all technical documentation and drawings of the Project works.
• Work closely with consultant on the scope of services, design and project deliverables to enhance site efficiency and constructability.
• Manage design approval process and coordination with the clients, consultants and subcontractors in a timely manner to resolve all technical issues.
• Ensure strict compliance of the design in accordance with contractual requirements.
• Identifies and highlight to management and project team of any potential risks or issues that will impact project performance.
• Support tender team and prepare technical tender documents as per specifications for bidding of civil and structural engineering projects as when assigned.

Requirements :

• PE Board Recognised Degree in Civil Engineering
• Minimum 1 year of design management experience with at least 1 year of design experience in consultant firm.
• Strong coordination and collaboration with other disciplines.
• Good interpersonal and communication skills .
• Good organization and time management skills.

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Minimum Qualifications/ Experience/Skills

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• Proven ability to communicate well in written and verbal communications
• Design thinking for product inventions and enhancements
• Motivation and commitment to providing interpersonal customer service
• Knowing and applying current industry standards and information
• Soft skills including a positive attitude, flexibility and conflict resolution
• The ability to solve problems creatively on time
• Having up-to-date knowledge and technical skills

Summary

The Apple Services Engineering team is one of the most exciting examples of Apple's long-held passion for combining art and technology. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, and Apple Books. And they do it on a substantial scale, meeting Apple's high expectations with dedication to deliver a huge variety of entertainment in over 35 languages to more than 150 countries. These engineers build secure, end-to-end solutions. They develop the custom software used to process all the creative work, the tools that providers use to deliver that media, all the server-side systems, and the APIs for many Apple services. Thanks to Apple's unique integration of hardware, software, and services, engineers here partner to get behind a single unified vision. That vision always includes a deep dedication to strengthening Apple's privacy policy, one of Apple's core values. Although services are a bigger part of Apple's business than ever before, these teams remain small, forward-thinking, and multi- functional, offering greater exposure to the array of opportunities here As a software engineer on the Apple Services Engineering (ASE) Core Services team, you'll create and enhance features that elevate the customer experience for millions of users worldwide. Collaborating with cross-functional teams, you'll work on large-scale systems, leveraging distributed data stores with a focus on scalability and performance. We foster creativity, engineering excellence, and innovation to make a meaningful impact.

Description

You will be part of the server team that powers customer-facing features within the Apple client applications - Apple Music, Apple Podcasts, Apple TV, App Store, Apple Arcade, Fitness+ etc. You will be working multi-functionally with various teams across Apple to deliver some really exciting features to our customers. Thinking about service performance is a constant thing for us, and we are searching for someone like-minded. If you are used to thinking about performance in terms of median, 95th percentile and 99th percentile, then we are looking for you. You would be someone who is not afraid to question assumptions, is a phenomenal teammate under tight deadlines and seeks problems with sophisticated technical solutions.

Minimum Qualifications

• Bachelors or Master's degree in Computer Science/Engineering or equivalent technical discipline.
• At least 3 years of professional software engineering experience
• Proficiency in JVM languages like Java, Scala, Clojure or other object oriented programming languages such as C++, GoLang, C# etc.
• Strong object oriented programming skills with deep knowledge of data structures and algorithms.

Preferred Qualifications

• Multiple years of experience developing and scaling high-availability, low-latency distributed systems
• Experience in designing and implementing RESTful APIs or other API technologies.
• Exceptional problem-solving, critical thinking, and communication skills.
• Expertise in writing robust unit and integration tests
• Familiarity with NoSQL technologies, including but not limited to Solr/Lucene, Redis, Memcached, Cassandra, and Voldemort

Role Profile

This role pursues sales targets for the Company’s products and follows up on pre- and post- sales activities requested by customers.

Key Responsibilities:

• Source and engage suppliers and follow up on sourcing
• Generate quotation and process sales orders for company’s products
• Confirm product information, product pricing and inventory levels for the preparation of quotations
• Develop strong relationships with suppliers and customers
• Assist in organizing marketing activities and product showcase to customers
• Analyse market demands based on feedback and transactions to develop product and service offerings
• Prepare communications channel to Project Team for co-ordination with Clients for secured projects

Competence (Knowledge, Skills and Abilities):

• Skills in preparation of materials and presenting in small group settings (user demo and training, customer presentation)
• Skills in negotiation with customers, principals, and suppliers on requirements
• Skills in relating to and servicing the customers with a win-win mind set

Education & Experience:

• Minimum GCE ‘O’ Levels, ITE Technical Engineer Diploma in Machine Technology and above
• Minimum 3 years of sales experience preferably with Industrial Equipment knowledge

Your Role

• Assist the Planning Manager in all planning functions
• Monitor progress of work on site on a daily basis
• Prepare histograms, tables, S-curves, resources logs (Manpower, Materials, Equipment)
• Develop construction programmes for medium to large-scale projects
• Maintain and update all schedules, collect actual data (progress, manpower and equipment deployment) and evaluate project delays by effective monitoring of actual progress
• Prepare daily, weekly and monthly progress reports for in-house, owner and consultant submission
• Maintain records for all significant events relevant to contractual claims/obligations
• Liaise, consult and coordinate with all Supervisors and Managers to incorporate relevant information that will affect the implementation of the project schedule

The Requirements

• Possess a Degree in Civil Engineering with at least 3 years’ working experience construction planning and programme coordination
• Has aptitude for planning role
• Be adept in Microsoft Project and Primavera P6 knowledge
• Be meticulous, highly motivated and independent with excellent team spirit and interpersonal skills

JD:
o Good programming skills in Python
o Must possess experience or interest in training and deploying machine learning models end to end.
o Good understanding of basic statistics and deep learning techniques
o Prior experience in data integration, profiling, validation and cleansing
o Proficiency with SQL
· Software delivery
o Strong understanding of agile methodologies
o Strong understanding of CI/CD
o Strong understanding of test-driven development
o Comfortable using version control and enterprise task management tools.
· Data Engineering
· Experience in deploying TensorFlow and PyTorch into production
o Building data pipelines and architecture
o Should have extensive experience with relational and NO-SQL databases
o Should have proficiency in handling both structured and unstructured data sources
o Strong experience deploying applications to cloud platforms like Azure, AWS
o Interest in building efficient batch and streaming data engineering pipelines
o Exposure to distributed data processing platforms like Spark?.Data Engineer

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

• Experience in setting up automated systems.
• Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568