Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 4-8 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

Job Description

• Preparing contracts for external stakeholders (including maintenance contracts)
• Preparing budget for the medical centre
• Preparing presentations for internal/external stakeholders
• Liaising with internal stakeholders e.g. Finance, HR, IT
• Liaising with external stakeholders e.g. contractors, vendors, hospitals, dormitories, government agencies and landlord
• Participate in procuring various services for the medical centre
• Regularly processing and reviewing invoices, outsourced services and centre's licenses
• Data entry and consolidation
• Prepare and coordinate licensing and audits (MOH, NEA and MOM)
• Reporting officer of admin and operations team, overall in charge of rostering, staff development and appraisals
• Liaison person for research projects
• Preparing monthly workload statistics / dental reports
• Overseeing Primary Care Plan (PCP) onboarding and off-boarding
• Preparing and coordinating reports to Migrantwell Singapore

Requirements

• Degree in Business Administration or equivalent.
• Minimum 5 years of relevant experience in managerial level, preferably operations experience in healthcare setting in a similar capacity.
• Excellent interpersonal and communication skills to work well with all departments.
• Strong leader with tested ability to manage, motivate and coach teams.
• Enjoys challenges and able to work with tight timelines when needed.
• Well versed in Microsoft Office (Word, PowerPoint and Excel).
• Able to work in collaboration with other professionals in the multi-disciplinary team.

Location

St Andrew's Migrant Worker Medical Centre

27 Penjuru Walk, #01-24, Penjuru Recreation Centre, Singapore 608538

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Research, design, and develop new circuits, technology, modules, and devices
• Strategise on architectural and electronic designs, product pipelines, and new potential technology and devices
• Identify, analyse, recommend, and develop next-generation improvements for existing circuits, technology, modules, and devices
• Conduct evaluations and recommend modifications on existing designs and prototypes based on performance in quality test and customer feedback
• Ensure reliable and consistent performance and function of existing designs for circuits, technology, modules, and devices in operating environments
• Perform circuit analysis, run simulations, create schematic drawing and PCB layouts, and produce wiring programs using respective softwares
• Design, develop, and execute testing and investigation methods / procedures for circuits, technology, modules, and devices with the use of Automated Test Equipment (ATE)
• Prepare engineering sketches and specifications, design and test documentation, product specification or Bill of Materials (BOM), and product development timeline
• Coordinate with relevant teams to ensure design manufacturability and testability
• Keep updated on technology and regulation development

Requirements:

• Good understanding of electrical engineering codes, electronic systems, component materials and safety standards
• Possess hands-on experience using design and calculation software
• Strong analytical, problem solving and conceptualisation ability
• Strong interest in technology
• Ability to think outside the box and manage complexity
• Strong team player and customer-oriented with strong interpersonal and communications skills
• Proactive, enthusiastic with “can do” attitude
• Meticulous, self-reliant and strong sense of urgency
• Committed, motivated and able to handle multiple tasks simultaneously

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Job Responsibilities

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects
• To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.
• Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.
• Be the primary focal point between various parties

Qualifications & Experience

• Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

• Self-starter and ability to self-manage strong interpersonal and leadership skills
• Demonstrated oral and written communication skills
• Must have high level of integrity, able to generate trust and build alliances with co-workers
• Able to communicate effectively & diversely for prompt resolution to site matters
• Able to work independently, take initiative and willing to work overtime/weekends (when needed)
• Ability to foresee and resolve issues before surfacing would be an added advantage
• Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures
• Ability to maintain good project documentation and is familiar with ISO documentation requirements
• Safety certifications such as Working at Height, Construction Safety Orientation Course etc. preferred
• Mandarin speaking preferred as will be liaising with overseas vendors
• Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT
• Basic programming skills in VB, C, C++, Java, C# etc is advantageous
• Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to join our team. The successful candidate will be responsible for ensuring the quality of low voltage switchboard panels to meet industry standards and client requirements. This role requires a strong understanding of electrical systems, testing procedures, and quality assurance.

Key Responsibilities:

• Conduct comprehensive testing of low voltage switchboard panels, including insulation resistance tests, contact resistance tests, high voltage tests and function tests.
• Perform inspections and audits of electromechanical assemblies to ensure compliance with applicable standards and specifications.
• Document test results and prepare detailed reports for internal and client review.
• Collaborate with design and manufacturing teams to identify and resolve any issues or discrepancies.
• Ensure all testing equipment is calibrated and maintained in good working condition.
• Participate in continuous improvement initiatives to enhance testing processes and procedures.
• Train production staff on quality control processes and provide guidance on quality-related matters.
• Stay updated with industry standards and advancements in testing methodologies.
• Ensure the quality of products meets the required standards and specifications.
• Support onsite testing, FAT, SAT and troubleshooting activities, if necessary.

Qualifications:

• Minimum Diploma in Electrical Engineering or a related field.
• Minimum of 2 years of experience in testing low voltage switchboard panels or similar electrical equipment.
• Strong knowledge of electrical testing procedures and standards (e.g., IEC 61439).
• Proficiency in using testing equipment and tools.
• Excellent analytical and problem-solving skills.
• Strong attention to detail and accuracy.
• Good communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

Preferred Qualifications:

Certification in electrical testing or quality control.

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Key Responsibilities:

- Provide technical support and expertise on marine electrical systems, products, and solutions.

- Assist in the selection, specification, and procurement of marine electrical equipment for various maritime applications.

- Evaluate client requirements and recommend suitable electrical solutions, ensuring compliance with industry standards and regulations.

- Work closely with the sales team to deliver product presentations, provide quotes, and respond to customer inquiries.

- Liaise with vendors and suppliers to ensure the timely procurement of electrical components and equipment.

- Prepare and review electrical drawings, schematics, and documentation for projects.

- Ensure adherence to safety standards and quality assurance procedures for all electrical installations and services.

Job Requirements:

- Minimum 3 years of relevant experience in marine electrical systems.

- Strong understanding of marine electrical standards, regulations, and safety procedures (e.g., SOLAS, ABS, IEC standards).

- Familiarity with electrical design and installation on marine vessels.

- Excellent communication skills, both verbal and written, with the ability to interact with clients, suppliers, and internal teams.

- Ability to work independently and as part of a team in a fast-paced, customer-oriented environment.

- Strong problem-solving skills and attention to detail.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience
• Site Location West Region

Main Job Function: Responsibilities:

• Overall responsible for Aftersales services and customer coordination
• Installation, commissioning, repair and preventive maintenance of Compressed Air systems
• Conduct on-site training to customers.
• Service Report Management,
• Spare Parts Ordering & Processing for jobs and stock
• Organizing goods for projects and coordinating Deliveries when required
• Prepare quotations for service jobs and follow up.
• Warranty handling

Pre-requisites:

· Advance Diploma in Mechatronic/Mechanical/Electrical Engineering

· Able to work independently with good analytical, communication and interpersonal skills.

· Willing to travel in Asia region for After-Market Support and training when required

· Team player who is self-motivated

· Knowledge on Screw & Piston compressors preferred Both Oil Lubricated and Oilfree

· Class 3 driving license would be added advantage.

· Able to speak and write good English

· Able to speak in Chinese (Mandarin) will be of advantage

· Knowledge of using computer for communication and use in controller repairs

· Technical knowledge with related to Air compressors/machinery & parts

· Over 2 years work experience in similar work environment would be an added advantage

Interested applicant, please email in with a detailed resume with photograph and stating expected salary to:

Nalin Amunugama

General Manager BOGE Asia Pacific

Email: [email protected]

Drex-Chem Technologies Pte Ltd

The DREX-CHEM GROUP is a successful leader in the distribution of specialty chemicals, resins, pigments, printing consumables & equipment in ASEAN and Hong Kong/China. The Company views our human resource as the most vital key to our continuing growth and profitability.

To meet the challenges of our growth market, we have IMMEDIATE vacancies for:

SALES ENGINEERS

(Ability to work in Tuas and Stay in Singapore should Only Apply.)

Responsibilities :

· Sales, marketing, technical service and support.

· Product development, sales and supply.

· Responsible for processing orders and documentation.

· Identify and create new accounts to increase sales revenue.

· Execute a sales plan and report daily activities to the Manager

· Develop business relationship, visit and make presentation to potential customer.

· Collect and review customers’ enquiries and prepare quotations.

Requirements:

· Degree or Diploma/ITE in Chemistry or an discipline in Chemical, Electrical, Electronics or Mechanical or related discipline.

. 2 years’ experience in Sales/Marketing in either Semiconductor and Electronic Industries

· 1-2 years’ experience in Sales & Marketing in the Paints/Inks or Printing or Construction Industry will be an advantage.

· 1 to 2 years or more hands-on experience in sales or technical support, manufacturing, laboratory or quality control.

· Excellent communication skills.

· Good spoken and written English.

· Valid Class 3 driving licence with own car has added advantages.

· Reliable, loyal, committed, honest and capable of developing new markets.

· Successful finishers with good track record have an advantage.

· Willing to learn and adapt.

· The necessary training will be provided.

· Able to travel overseas for training and business development.

. Ability to work in Tuas and stay in Singapore should only apply.

The Company offers excellent career advancement program with attractive remuneration packages for performers.

Interested applicants are invited to write in (marked “Private & Confidential”) before 8 February 2025 with full resume, current and expected remuneration details to:

Drex-Chem Technologies Pte Ltd

1 Tuas, Avenue 16.

Singapore 638924

Attn : HR Manager

Or email to: [email protected]

Univers provides the world’s most comprehensive decarbonization system.

We help companies and countries optimize energy systems and reduce carbon emissions with accurate, reliable, and actionable decarbonization data. Our EnOS (Energy and Environment Operating System) platform connects on-the-ground operational technology and in-the-cloud intelligence to deliver real-time energy data and data-driven carbon monitoring, reporting, and abatement.

With 220 million sensors and smart devices connected, 550GW of renewable energy under management, and a community of over 500 customers, we’re helping the world’s leading businesses get the world to net zero—and what comes after it.

For more information, please visit https://univers.com/

IoT Engineer

As an IoT Engineer, the successful candidate will be involved in Edge to cloud deployments. This will involve connectivity to downstream systems, configuring edge hardware, onboarding of data points and configuring cloud apps to create dashboards and insights.

In this role, you will gain a deep understanding of cutting-edge digital, green tech, smart buildings, energy related operations and products, as well as popular IoT data transfer protocols such as MQTT. Strong problem-solving skill, independent study capability and self-motivation are the core qualities of a suitable candidate. On-job-training and guidance will be provided to the successful candidate.

Suitable candidates will have a good background in IT and BMS (building management systems).

Responsibilities:

• Be responsible for all site related activities, such as Edge installation works, Edge hardware and software configuration works, IP network configurations, ensure communications connectivity to Cloud and configure Cloud applications and verify data quality
• Support Solution Architects to ensure end to end accountability
• Attend to customers’ technical issues and work closely with Solution Architects, to resolve issues
• Ensure proper project documentations
• Escalate technical or any issues to your supervisors in a timely manner and expedite problem resolution
• Register product or solution issues and track the progress with Solution Architects
• Support Solution Architects in conducting end-to-end testing
• Managing users’ ad-hoc and urgent change requests
• Be hands-on in the above activities

Qualifications & Experience:

• Diploma/Degree in Information Technology / Electronics, Communications Engineering or equivalent
• Basic Networking knowledge & IP addressing required
• At least 1-3 years of working experience in IP Networks, Building management systems or PLCs
• Familiarity in Building protocols such as BACNET, MODBUS, OPC UA is desired
• Desire and passion to learn new technologies and skills
• Excellent analytical and creative problem-solving skills
• Initiative and drive to get things done
• Able to work under pressure and within tight deadlines on several initiatives simultaneously

Responsibilities:

• Monitor, support, maintain, and document CIM systems.
• Design, develop, maintain, and improve CIM applications and components.
• Provide Level 2 and Level 3 support for production line operations.

Requirements:

• Degree in Computer Science/Computer Engineering, or equivalents. Diploma with relevant experience acceptable.
• Minimum 2 years of experience in CIM with High Automation, MES, and SECS/GEM.
• Proficient in basic SQL (Oracle) and Java.
• Experience with Tibco (TIB/RV) or high-tech manufacturing environments is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

JOB RESPONSIBILITIES:

• Perform Stamping die set design according to product specification & requirement
• Carry process layout discussion & confirmation with R&D & production team
• Perform 3D CAD construction for complex shapes Profile Punch & Die
• Work as a team & perform tool testing with tester to achieve tooling FA timely
• Carry out further tool improvement during initial production period to stabilize tool condition

JOB REQUIREMENTS:

• Diploma / ITE in Mechanical Engineering, Precision Engineering or related disciplines
• Experience in metal Stamping Designing is needed
• Proficient in 2D & 3D AutoCAD or others CAD applications
• Be able to work independently & work under pressure
• Willing to perform overtime

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

JOB DESCRIPTION

• Assist Project Manager to oversee, coordinate & execute assigned projects. And ensure projects complete and deliver it on scope, on schedule & on quality.
• Perform project schedule, planning, material requisition, cost monitoring and documentation submission & control.
• Coordinate with the internal design team & external customers on project document & drawings submission, amendments, re-submission & approval.
• Update & backup project documentation, drawings, reports & procedures (SOP, WI, Lesson Learned, etc.)
• Participate projects progress meeting and update weekly status, monitor contracts completion and submit weekly reports to PM & customers.
• Work closely with internal team (production, logistic, QC, service etc.) on project schedule and deliveries, FAT, SAT, and modification work.
• Co-ordinate with principals and customers to support technical matters of products manufacturing in factory, and systems installation on site.
• Attend site meetings, site surveys and switch room measurement etc. site activities.
• Liaise with customers on factory inspection, deliveries, installation and on-site testing.
• Work together with PM & team members to attend & service customers’ complaints, feedbacks and provide solution for project change requirement.
• Support team members work to enhance teamwork spirit.
• Participate in product demonstrations, testing and commissioning if required.
• Any other duties when assigned by management.
• Ensure all safety measures and proper housekeeping rules are implement.
• Adhere to plant safety, food safety, sanitation standards and following all governance guidelines.

EDUCATIONAL QUALIFICATIONS

Diploma in Electrical Engineering, or related industrial engineering field.

EXPERIENCE & SKILL FACTORS

• Min 2 years’ working experience, prefer in project management.
• Some hands-on experience of electrical SWBD and system assembly & installation.
• Familiar with local codes, regulations and procedures.
• IT skills (MS Office). AutoCAD preferred.
• Good communication and people relation skills.
• Leadership, ownership, team player, self-motivated.
• Attention to details and eager to learn new technology

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description:

• Day-to-day customer service and procurement activities - Responsible for managing daily customer service operations and manage entire supply chain process from procurement to distribution to ensure timely and cost-effective delivery of products.
• Demand planning - Work closely with sales and marketing teams to forecast demand accurately.
• Production Planning - Collaborate with Operations team to develop production schedules and optimize the production planning that align with demand forecasts.
• Inventory Management - Work within the team to implement robust inventory control measures to maintain optimal stock levels. Monitor and analyze inventory turnover, taking proactive measures to prevent shortages or overstock situations.
• Logistics Coordination - Coordinate logistics activities, including transportation, shipping, and customs clearance. Optimize transportation routes and methods to reduce costs and enhance efficiency.
• Relationship Management - Build and maintain strong relationships with local and overseas suppliers and customers. Develop good vendor management with warehouse personnel for effective inventory control.
• Licensing - Manage all license requirements for Import/Export & transportation with compliance to Government Authority of Singapore.
• Collaboration and Communication - Work with product management team to review product specification/technical data. Collaborate with quality control teams to ensure that all products meet industry standards and customer specifications.
• Perform any other ad hoc tasks assigned by Team leader / Management.

Job Requirements:

• Degree in Chemistry / Chemical Engineering or any Engineering field.
• Minimum of 2 Years of working experience in a related field.
• Preferably with related experience in Chemical Distribution/ Semiconductor industries.
• Excellent written and spoken communication skills in English and ideally proficient in Chinese (in order to negotiate and handle queries with overseas Mandarin speaking suppliers/vendors in regards with the import & export shipment arrangement matters).
• Hands on experience using SAP/Navision system, strong in Microsoft Office, especially Excel would be an advantage.
• Experience in ISO9001, ISO14001 and ISO 45001.
• Ability to prioritize workload, make systematic decisions under pressure.
• Possess an entrepreneurial ‘can do’ mindset, able to work in a start-up environment.
• Possess excellent interpersonal skills, strong problem-solving skills and sense of ownership.
• Willing to travel if required.