To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Duties & Responsibilities:

• To install, troubleshoot, repair service and maintenance for Chamber, Oven, Chiller & Semiconductor Testing Equipment.
• Provide technical support in the field.
• Prepare onsite for service schedules within budgets.
• Create and execute work plans and revise as appropriate to meet changing needs and requirements.
• Manage day-to-day operational aspects of the after sales service.
• Prepare progress reports, risk assessments and customer updates.
• Continually seek opportunities to increase customer satisfaction and deepen customer relationships.
• Manage sub-contractor and ensure work compliance with specifications.

Job Specifications:

• Diploma holder in Electronics/Electrical/Mechatronics Engineering or equivalent.
• Minimum experience of 1-2 years in the Refrigeration Industry.
• Knowledge and experience in brazing will be an added advantage.
• Willing to travel.
• Self-motivated and able to work independently, with minimum supervision.

JOB SCOPES

1. Develop detailed designs and specifications for HVAC systems, including air conditioning, heating, and ventilation systems.
2. Create and review blueprints, schematics, and system layout.
3. Select appropriate mechanical equipment and components based on system requirements and performance criteria.
4. Coordinate with other engineering disciplines, such as electrical and structural engineers, to ensure seamless system integration.
5. Oversee the installation of HVAC systems to ensure they are installed according to design specifications and industry standards.
6. Conduct system commissioning to verify that all components are functioning correctly and efficiently.
7. Troubleshoot and resolve mechanical issues in HVAC systems to minimize downtime and ensure reliable operation.
8. Design systems with a focus on energy efficiency and sustainability.
9. Evaluate and recommend energy-saving solutions and technologies to reduce operational costs and environmental impact.
10. Ensure that HVAC systems comply with local building codes, safety regulations, and industry standards.
11. Address any safety concerns related to the mechanical aspects of HVAC systems.
12. Manage HVAC projects from conception through to completion, including budget management, scheduling, and coordination with contractors and suppliers.
13. Monitor project progress and resolve any issues that arise during the implementation phase.
14. Communicate effectively with clients, project managers, and other stakeholders to understand their needs and provide technical support.
15. Provide training and documentation for system operation and maintenance.
16. Stay updated with the latest developments and technologies in HVAC systems.

Duties & Responsibilities:

• Prepare and provide proposal/offer to customers for Chamber, Oven, Chiller & Semiconductor Testing Equipment.
• Prepare onsite for service budgets.
• Prepare quotations and follow up on sales enquiries/proposals from customers, to meet the requirements.
• Manage day-to-day operational aspects of sales follow-up.
• Prepare progress reports and customer updates.
• Continually seek opportunities to increase customer satisfaction and deepen customer relationships.
• Manage sub-contractor and ensure work compliance with specifications.

Job Specifications:

• Diploma holder in Electronics/Electrical/Mechatronics Engineering or equivalent.
• A minimum experience of 1-2 years in the Refrigeration Industry.
• Good knowledge and experience in Sales.
• Willing to travel.
• Self-motivated and able to work independently, with minimum supervision.

Roles & Responsibilities

• Update monthly and weekly reports:
• Financial (billing of the operation, monitor deviations & improve reliability, support customer on cost controlling request)
• Operational (KPI, improvement of reporting accuracy, reporting of productivity, consistency)
• Improve these reports
• Automation
• Delegation to operations once they are easy-to-play solution
• Follow-up on customers ad-hoc requests (data inconsistency, new reports’ needs, spot analysis)
• Take part of the continuous improvement actions
• Warehouse Management System improvements
• Global program of lead-time reduction
• Global program of efficiency improvement (5S, lean management)

Requirements

• Bachelor/Master of Science in Supply Chain Management
• Strong in data crunching and analysis
• Excellent command of Excel and Access, SQL queries and database management structure
• Basic knowledge in lean management, Six Sigma, 5S
• Good communication skills

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

We are seeking a skilled Civil Engineer to support the site project. The candidate will also supervise concreting operations and manage estimation of Bill of Quantities, project progress claims and earthwork supervision. Proficiency in AutoCad to review and make necessary adjustment to project

drawings.

Responsibilities:

• Install, configure, and maintain server operating systems (Windows/Linux/VMWare)
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup
• Perform routine system administration duties
• Monitor servers and troubleshoot issues
• Provide additional support when necessary (eg. backup and storage functions)
• Perform proper documents for all processes
• Recommend solutions and ensure all IT issues have been corrected, and maintain records of work performed
• Provide technical support across the company, including Singapore, regional offices, and retail stores
• Provide technical support to server and network infrastructure and perform regular upgrades to ensure systems remain updated
• Troubleshoot system failures or bugs, and provide solutions to restore functionality
• Assist with any ad-hoc tasks as assigned

Requirements:

• Minimum Diploma in Computer Science, Information Technology, or a similar field
• At least 2-3 years of working experience in the related field
• Experience in configuring, monitoring, and troubleshooting systems
• Able to communicate effectively in both oral and written aspects
• Able to work independently and in a team
• Possesses analytical skills and works well in a fast-paced environment

Computer Engineering Technical Skills

- Knowledge of operating systems

- Understand computer network and hardware

- Debugging and troubleshooting

- Strong written and verbal communication skills

- Interested and passion in robotics

Jobe Description

- Development and test new features for robotic systems

- Participate in the whole development cycle including design,

development and deployment

- Application of software product onto real-world industrial

environment

- Product fiscovery and evaluation of emerging technologies for robotic

use cases

• PLC & HMI system design and develop applications that effectively accomplish objectives and needs
• Analyse and edit existing PLC applications to improve functionality
• Test & simulate PLC applications extensively to ensure they are error and bug free
• Liaise with customer/end-users to identify technical requirements and develop solutions
• Create and present application prototypes that align with requirements
• Problem solving and troubleshooting skill
• Identify and evaluate technology solution to fulfil system requirements
• Determine project constraints including estimated time and costs
• Perform maintenance, troubleshooting and calibration on machines & equipment.
• Other duties/activities as assigned by management

Responsible to manage system development, implementation and support of EAI applications, including:

• Develops applications that effectively accomplish client objectives and user needs.

• Designs and writes code for applications and maintain applications databases.

• Analyzes and edits existing software applications to improve and optimize functionality, fix problems, and enable their use on new hardware platforms.

• Remodels and adapts applications as needed to optimize performance.

• Identifies specific client needs and preferences related to the application.

• Tests applications extensively to ensure they are error and bug-free.

• Installs applications and acts as technical advisor.

• Communicates with relevant internal technical stakeholders to obtain information on project limitations, performance requirements and interfaces.

• Consults with clients in the design phase to determine client needs.

• Produces software documentation following company/client software process and templates.

• Participates in software product review meetings and team meetings.

• Performs any other related task as required.

Key Requirement

• Bachelor's degree or equivalent in computer science or software engineering or related field.

• Seasoned Software Applications Engineering, Software Development experience, or related work experience.

• Seasoned experience with Programming Languages such as (but not limited to) ANSI C, C++, and Unix Korn Shell programming

• Seasoned experienced with Linux or Unix and Windows operating systems.

• Seasoned experience working with Oracle Tuxedo, IBM MQ Series.

• Experience in banking or financial industry

• Certification in various programming languages, for example (but not limited to) Java, Perl, Python, C++ preferred.

Responsibilities:

● Daily monitoring and compilation of robot performance and issues

● Oversee project operations and liaise with subcontractors and suppliers on project/deployment matters

● Prepare documents for purchasing order

● Handle ad-hoc duties e.g., delivery and robot transportation activation

Requirements:

● Education – Preferably Diploma and above

● Language – Strong communication skills in English (both oral and written)

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a novel near-eye display technology for augmented reality (AR).

Key Responsibilities

• Participate in the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Conduct research towards a novel near-eye display for augmented reality and develop a prototype.
• Coordinate procurement and liaison with vendors/suppliers and carry out other project related activities.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements

• A Bachelor/Master’s degree in computer, mechanics or related programmes.
• Knowledge and experience in near-eye display for VR/AR will be advantageous.
• Able to build and maintain strong working relationships with people within and external to the university.
• Show strong initiative and take ownership of work.
• Teamwork spirit

Key Competencies

• >= 2 years of research experience in near-eye display technologies for VR/MR.
• Teamwork spirit and ownership attitude.

PFU Asia Pacific Pte Ltd ("PAPL") is assigned as the control center in managing scanner sales and marketing within Southest Asia region.

Join us as Technical Support Engineer to be an integral part of our regional sales team, helping to drive the growth of the Ricoh document scanners.

Responsibilities

1.Post-sales support :

- Provide technical support to partner or customer after purchasing our product.

- Assist technical team of partner and customer to tackle and resolve technical issue.

- Dissemble and assemble scanner according to maintenance manual(training will be provided).

- Train and enable service partner to provide post-sales support to end-user

- Manage and process of warranty claims, demo/standby unit loan, spare part cannibalization, with system and paperwork.

- Installation and configuration of hardware and software products.

2. Pre-sales Support :

- Support sales activity as technical expertise.

- Assist sales team, partner or customer to win and deliver deals.

- Demonstration of hardware and software product.

- Assist in integration of own products with 3rd party solution.

- Training and enable partner on pre-sales technical capabilities.

- slight experience in programming will be advantage.

- Occasional overseas travel is required.

(Average 1 trip per quarter. Mainly to ASEAN, South Asia countries, or Japan)

We appreciate all applicants for their interest in this opportunity. However, only those shortlisted for interview will be contacted.

ob Responsibilities:

• Plan and execute system administration tasks, including installation, deployment, testing, and commissioning.
• Generate and maintain documentation such as maintenance reports and checklists.
• Create and regularly update technical documentation, covering system configurations and procedures.
• Coordinate with project teams and external clients to plan and execute system upgrades/maintenance projects.
• Conduct maintenance on VA servers, network equipment, and camera systems.
• Address user-reported IT issues promptly, delivering technical support as needed.
• Diagnose and resolve issues related to hardware, software, and network functionality.
• Implement security best practices to safeguard systems from threats and vulnerabilities.
• Apply updates and patches to operating systems, software applications, and drivers to ensure security and performance (Windows Server, RHEL).

Job Requirements:

• Minimum Diploma/Degree in Information Technology or similar function
• Minimum 1 year of experience in server/desktop maintenance or similar function
• Hands-on experiences in configure, troubleshoot Microsoft Windows Servers and Red Hat Linux Servers
• Level 2 Experience is required
• Familiar with system applications & networking concepts
• Proficiency in troubleshooting and problem-solving

Responsibilities

• To ensure smooth operation of site activities.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule

Qualifications

• Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification.
• Experience/Knowledge in structural steel works/ precast RC works/ Building/ MRT/ LTA is an advantage
• More than 8-years of site experience in Construction sector.
• Good team player and able to work independently
• BCSS Certificate
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

RESPONSIBILITIES (E.g. Job Scope) :

• Prepare method statements for Tunnel activities for submission, safe work procedures, risk register, daily/weekly reports, tunnel progress reports, and other tunnel related documentation.
• Maintain and monitor quality control and records.
• Prepare and carry out presentation of tunnelling works prior to commencement of works.
• Conduct daily site inspection and supervision of site works, ground improvement, ERSS, deep excavation, bored tunnelling works, tunnel internal structure construction and Adit/Cross Passage construction.
• Supervision work on a TBM machine controlling the tunnel labour in excavation and ring build
• Maintain site records of excavated volumes, grouting records and other construction work.
• Plan and monitor and track site progress, manpower mobilization and equipment deployment
• Ensure job safety analysis and site safety compliance
• Coordinate various subcontractors to ensure work runs smoothly
• Identify and assess any foreseeable risk arising from the workplace or work processes, minimize environmental impact associated with the construction activities.
• Ensure safe work procedures and environmental control measures are implemented at the work site
• Liaise with authorities, consultants and subcontractors.

REQUIREMENTS:

• Degree in Civil Engineering or equivalent
• At least 8 years’ experience in handling Tunneling projects
• knowledge in operate EPB TBM system with CREG machine, Terratec machine, Herrenknecht Machine, TBM SELI Technologies machine and Slurry TBM system with TBM Hitachi Machine
• Must be able to work under Compress Air for Cutterhead intervention works
• Knowledge in Autocad and able to use Autocad to draw drawings.
• Able to do shift work (12hours)

EMQ2 is seeking a highly qualified Software Development Engineer to join our team and work on projects that impact the lives of many. Our products, including Enterprise Login, Payment Gateways, and Training and Learning Management Systems, are used by over 1,000,000 users. We're looking for passionate professionals to grow and learn with us. If you have more experience, you may be considered for a senior role.

You will be

As a developer on our team, you will have the opportunity to work with the latest technologies and take on challenging projects that will both test and reward your skills. In addition to working on projects that align with your passions and helping you grow as a developer, you will play a key role in the design and implementation of high-quality software systems. Collaboration is a crucial aspect of this role, as you will work closely with other engineering teams, product management, and QA/DevOps to ensure that our products meet the needs and expectations of our customers.

By actively participating in and providing feedback on internal practices, you will also help to drive our commitment to continuous improvement and excellence. This may involve suggesting new ideas or approaches, or providing constructive feedback on current processes. We believe that by constantly striving for excellence, we can provide the best possible products and services to our customers.

Ideally, should have

• Strong communication skills to work with clients and team members
• Passion for learning and growing as a developer
• Grit and determination to overcome challenges and strong problem-solving skills to solve complex problems
• Ownership of work and desire to deliver high-quality solutions
• Capable of understanding the business requirements, working closely with customers, product management, and engineering to develop customer-centric solutions
• Experience in Agile Software Development Methodologies or at least theoretical knowledge and classroom experience
• Experience in Software Development and Design with frontend technologies like ReactJS, NextJS, VueJS or React Native
• Experience in Source Control Management (SCM) tools such as Git
• Experience with web services and RESTful APIs
• Ability to work independently and collaboratively as part of a team in a flexible and fast-paced environment

It would be a plus if you also have:

• Experience working with Design Language System, design patterns and tokens
• Experience in using Continuous Integration and Continuous Deployment (CI/CD) tools
• Experience in backend technology stack like Java Springboot, ASP .NET or NodeJS
• Experience in using and developing with SQL databases (e.g. Microsoft SQL, MySQL)
• Experience in using and developing with Docker
• Experience in using and developing with Amazon Web Services (AWS)

Our Benefits:

• Competitive remuneration package
• Flexible work schedule and remote work options
• Career progression opportunities
• Medical Insurance Coverage
• Open & Transparent Culture with a flat hierarchy

How to Apply

Interested candidates, please send your resume to [email protected]

Our Recruitment Process

After submitting your resume, we will personally review it and invite qualified candidates to take a technical test. The test should take no more than 60 minutes and will be based on the skills required for the position.

If you pass the test, you will be invited for a technical interview with the hiring manager. The interview will be a 60-minute session where we will discuss your experience and knowledge in the field.

Based on the outcome of the interview, the hiring manager will decide if you are suitable for the position. If that's the case, our HR team will contact you with an offer and the next steps.

Assistant Engineer (Electrical)

• Execute Preventive & Proactive maintenance of Electrical systems and monitoring of status of machines.
• Attend to Equipment breakdowns, Servicing and Troubleshooting of Plant Equipments and Machineries.
• Conducting root cause analysis into failures of machines, exchanging or repairing spare parts, liaising with vendors and ensuring post-repair efficiency.
• Involved in the installation of new Equipments during plant expansion.
• Carry out Equipment improvement projects and modifications.
• Assist and support Spare parts management, procurement and also maintaining minimum spares to reduce breakdown time.
• Familiar with safe work procedures.
• Responsible for safe practices when executing required task in the plant.
• Perform other duties as assigned.

Requirements

• Diploma in Electrical / Electronics Engineering and minimum 3 years of relevant experience
• Familiar with automatic control engineering
• Good knowledge of Siemens PLC S5 and S7
• Knowledge in frequency converters, Siemens Masterdrives and Micromaster
• Knowledge of MS Office is a must, SAP will be an added advantage
• Ability to read complex circuit diagrams
• Basic knowledge in mechanics, pneumatics and hydraulics
• Strong personality with a hands-on attitude
• Ability to work rotating shift and perform overtime on weekdays & weekends
• Self- motivated, flexible and capable of working in a fast-paced environment.
• Good verbal and written communication skills

Want to be part of a fun and exciting team in one of the fastest growing IT companies in Singapore? Xtremax is an established IT company that provides IT services such as website development and design to government agencies and private companies to help them transform their digital experience. We are expanding and actively looking for an experienced and highly motivated individual for the Technical Support role.

Responsibilities:

• Provide customer support by answering phone and email enquiries
• Primary investigation, information gathering before escalating to internal team for further diagnosis
• Manage operational issues/risks in a timely manner; escalating when necessary
• Keep track of service requests to meet service KPIs
• Follow standard operating procedures, and respond professionally
• Communicate effectively between customers and development team on escalated issues
• Understanding of issues raised by customer
• Good sense of ownership to customers’ reported issues and track them through resolution and bring to closure of ticket raised
• Serve as a key point of contact based on agencies assigned
• Cross functional collaboration: You are required to work with different teams within our organisation to meet the needs of our business.
• Escalate critical issues / roadblocks to the Technical Support Team Lead

Requirements

• Minimum polytechnic diploma in IT, computer engineering, or relevant experience
• Preferably have knowledge in cloud services (eg. Microsoft 365, Amazon Web Services, Microsoft Azure, Google Cloud)
• Preferably have knowledge in ticketing system (JIRA)
• Good interpersonal and communication skills
• Strong analytical and problem solving/troubleshooting skills
• Strong interest in technology
• Ability to communicate highly technical information to both technical and non-technical customer audience
• Ability to work independently and as a team in a dynamic environment

By submitting your resume/CV, you consent and agree to allow the information provided to be used and processed by or on behalf of Xtremax Pte Ltd for purposes related to your registration of interest in current or future employment with us and for the processing of your application for employment.

You also represent to us that you have obtained the consent of your referees when you disclose to us their personal data for the purpose of conducting reference checks.

The personal data held by us relating to your application will be kept strictly confidential and in accordance with the PDPA. You may also refer to our Privacy Policy for more details here: https://www.xtremax.com/privacy-policy

We regret to inform you that should you not consent to providing the necessary data required for us to process your application, your application will be considered void.

Apply for this job

Job Description:

Facilities Operations and Management

• Lead the planning, be hands-on construction supervision and maintenance of facilities, equipment, and buildings
• Design and lifecycle management of all facilities and equipment
• Maintain documentation related to electrical systems, including schematics and maintenance records
• Develop and maintain workspace (clean room, lab & offices) that builds a work environment enabling collaboration, innovation, productivity, and destination of choice
• Ensure high level of service for transportation, pantry, and other services
• Lead all aspects of building space allocation and layout, communication services and facilities expansion
• Lead Singapore office access and security control in partnership with Asia Regional Security lead
• Ensure all facilities meet established environmental and safety control requirements in partnership with Asia EHS team
• Collaborate with the business continuity team on disaster preparedness policies and procedures
• Manage the portfolio KPIs, space utilization rate and budget spend
• Lead and implement Integrated Facility Management outsourced for Singapore

Space Planning and Projects

• Develop space roadmaps for cleanroom, lab, and offices to meet business needs
• Lead site planning and design for new building construction, remodels, cleanroom, and lab installs, capacity planning, space planning, and engineering
• Develop and manage budget/timeline for projects

Real Estate Management

• Drive proactive planning and management of the Singapore real estate portfolio and leases
• Manage the site selection, negotiate, and execute lease agreements

Vendor Management

• Lead oversight of the performance of service providers, contractors, vendors, and suppliers
• Partner with Indirect Procurement to select and manage vendors for construction and operations based on procurement guidelines and standards

Data Analytics

• Compile market data, forecast, budget, and other analysis to support real estate investment opportunities
• Create and benchmark industrial peers’ key operational and service levels KPIs

Qualifications

• Bachelor's Level Degree with at least 5 years of experience (preferably in Electrical)
• Possess Singapore Certified Energy Manager (SCEM)
• Strong understanding of energy auditing, energy modelling, and energy efficiency technologies
• Demonstrated ability to partner effectively with business groups and align with company’s goals and objectives
• Deep understanding of real estate and facilities ecosystem: strategic sourcing, supply chain management, people management, facilities management, lease transaction management, design, construction, and project management
• Experience in leading country level network of sites, including knowledge in Singapore and international commercial real estate markets and regulations from proposal to build.
• Held position(s) in relevant or manufacturing environments
• Experience in operation and maintenance of transformers, LV/MV switchboards, UPS, motors, frequency converters, and power distribution
• Ability to study protection circuits, single line drawings, and control circuits
• Knowledge of low voltage systems including fire protection
• Compulsory knowledge of HV, LV, transformers, switchboards, and breakers
• Manage projects related to electrical infrastructure upgrades and improvements
• Experience in project installation of electrical distribution systems
• Strong communication and presentation skills with senior leaders
• Proficient with organizing and using data and financial analyses support and influence decision-making
• Ability to travel up to 30% of the time

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction.
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficientcy

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered (eg.M&E professional services, Green Mark Related work etc.)

REQUIREMENTS :

• Candidate must possess at least Diploma/Bachelor's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): English
• At least 2 Year(s) of working experience in an M&E Consulting firm.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD/BIM software is an added advantage.
• Able to work as a team, assertive , independent and proactive.
• Candidate without relevant working experience but with good interpersonal skills will be considered.

Interested candidates please submit updated resume via "APPLY NOW".

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Job Responsibilities:

• Technical support including full range of enterprise products, network technical solution, highlights proposal and etc.
• To handle clients’ inquiries and technical related issues.
• Collaborate with the team and others to identify, troubleshoot and find resolutions for technical problems.
• Responsible for new product test
• Promote solutions and deliver formal technical proposals / presentations to clients.
• Complete other tasks assigned by leaders and management.

Job Requirements:

• Experienced in networking product like Switch, Wireless Access Point, Router and other networking related product.
• Good knowledge in the fields of Business Network system such as Gateway, Switch, AP and IP CCTV.
• At least 2 years work experiences on Business Network domain or technical domain.
• Ability to speak in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters
• Experienced in handling and troubleshoot technical issues.
• Possess CCNA/CCNP and other networking certificate would be an added advantage.

Deskside/Desktop Support Engineer

We are looking for experienced junior and senior full-time deskside engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: West, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]