Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Design of hydraulic schematics
• Sourcing and sizing of components
• Modelling and drafting using CAD software
• Generate the EBOM and prepare design documents
• Integrate and testing of hydro-pneumatics system

Requirements:

• Keen interest in Mobile System Hydraulics and Pneumatics engineering and technology
• Must be competent with CAD Software such as Unigraphics and SolidWorks
• Knowledge in drafting, geometric dimensioning & tolerancing (GD&T) preferred
• Able to read and interpret fabrication/ mechanical/ assembly drawings
• Able to read and interpret electrical/ hydraulics/ pneumatic schematics
• Strong analytical skills is a plus
• Possessing a valid class 3 license is a plus
• Able to work independently and effectively with peers, resourceful and keen to learn
• Must be a team player with good communication skills
• Willing to perform hands-on work in the workshop/on the vehicle

Jobs Description

Manager a team of drivers to fulfill order in an efficient manner, effective plan and schedule drivers' daily activities

Experience in haulier/ shipping industry/ preferred

Good Planner, Organised and able to manage a team of drivers

Jobs Requirements

Candidate must possess at least Secondary School/ "O" Level in Logistics/ Transportation or equivalent

At least 3 year(s) of working experience in the related field is required for this position

Good knowledge of PSA/ Local Regulatio on Container Trucking

Work under Pressure

Required Language(s): English Multilingual

Please forward detailed resume starting your qualifications experience, date of commencement, present and expected salaries

Experience in Haulier

Shipping Industries

We are looking for an Assistant Principal Engineer to join our ILS O&S Team. In this position, you will be responsible for in-service vehicle matters, item obsolescence and vehicle upgrading proposal. You will work closely with the Design and O&S team as well as the End Users in order to maintain the availability of the in-service vehicles.

Job Responsibilities:

• Meet up of End Users to understand their issues and matters on hand.
• Work with different departments, local vendors, overseas OEMS to submit design/pricing proposal.
• Monitor progress of outstanding issues and/or submitted proposals.
• Monitor allocated budget for the given year.

Job Requirements

• Degree in Mechanical Engineering.
• Knowledge and/or experience in mechanical design. Proposal writing and budgeting experience will be an advantage
• Self-motivated and able to work systematically
• Team player with good communication and presentation skill
• Singaporeans only

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

• Assist in organizing and scheduling manpower within the department
• Oversee projects technically, attend yard meetings as needed
• To lead a team of skilled machinists to perform precision on-site machining services on client equipment and machinery
• Set up and operate various In-situ machines for precision work
• Responsible for overseeing and coordinating all activities related to the in-situ crankshaft repairs and maintenance
• Lead and supervise a team of technicians and machinists in performing in-situ crankshaft repairs and maintenance.
• Perform tasks both on-premises and at customer sites, which could be local or international.
• Read and interpret technical drawings and documents to find repair solutions.
• Complete jobs within the shortest possible time frame and coordinate all aspects as directed by the Department Manager
• Regularly update your manager on manpower schedules and project progress. Clear communication ensures that all team members are aligned with project goals and timelines.
• Conduct machine tool preventive maintenance as needed.
• Use all prescribed safety equipment and comply with OSHA rules

Responsibilities:

• Assist the base manager in maintaining and achieving the KPIs for the availability of the boats at client’s base
• Perform pre and post operations inspections of boats in bases
• Carry out replacements of machineries and electrical circuitries
• Responsible for the well-being of the team during working hours including attendance, discipline, productivity, work quality, and safety
• Plan and coordinate with fellow colleagues on work to be performed
• Brief and deploy the team effectively through detail task planning and supervision on-site
• Timely update of man-hours into SAP system
• Prepare reports for work done
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task

Requirements:

• Diploma or NTC in Electrical Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to use hand tools and measurement tools to perform repairs and maintenance works onboard vessels
• Able to communicate effectively with internal and external stakeholders
• Proficient in MS Office for purpose reports writing and progress report updates

Other Information:

• Official Work Hours: 7.25am - 5pm
• 5 Days Week
• Work location: Gul Base (9 Pioneer Place), occasionally in Brani Base and Benoi Yard when required
• Taxi Transport claimable for early reporting of work at Gul

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Job Descriptions

1. Responsible for the defect management of the drying/sorting system to ensure the timely discovery, entry and timely acceptance of various defects
2. Check the operating status of drying and sorting system equipment from time to time every day.
3. Strictly implement safe working procedures, strengthen patrol inspections and make various records
4. Responsible for inspection and supervision of drying, sorting and maintenance contents
5. Cooperate with the squad leader to prepare running logs
6. Persist in doing a good job in 7S related work and complete other tasks assisgned bt the team leader
7. Any other duties and responsibilities to be assisgned by Superior and Management from time to time within the JE Group

Job Requirements

1. Independent and possess sound analytical and communication skills
2. 2 Years of relevant experience
3. Diploma and above
4. Working Location: Tuas South Avenue 2

HOW MIGHT YOU DEFY IMAGINATION?

Amgen is one of the world’s leading independent biotechnology companies. For over 4 decades, Amgen has pioneered biotechnology breakthroughs, to bring state-of-the-art medicines from laboratory to the patient. Amgen has not only discovered and developed innovative human therapeutics, but has invested in cutting edge manufacturing capability and support services to deliver these exciting therapies to medical teams around the world. Japan and Asia Pacific (JAPAC) is the fastest growing region in Amgen. Now we are hiring an Senior Manager (Process Development) in Singapore.

Senior Manager (Process Development)

What you will do

The successful candidate will apply subject matter expertise to support technology transfer and ongoing cGMP production of commercial protein biologics processes. Scope of work could include:

• Lead site PD activities for continuous improvement, productivity improvement, and product life cycle management.

• Lead and manage PD safety and compliance initiatives including inspection readiness.

• Manage and oversee PD related projects, ensuring they are completed on time, within scope, and budget. Analyze project outcomes to identify areas for improvement and drive continuous optimization.

• Represent PD on key projects or business processes.Stay abreast of industry trends and leverage expertise to ensure the success of the Amgen Singapore Site, focusing on reliability, efficiency, agility, and differentiation.

• Collaborate with cross-functional teams and network drug substance teams for process alignment by applying advanced technical principles and concepts.

• Site PD champion for digital literacy and new digital tools deployment for process monitoring, tech transfer, and facility modeling. Apply best practices to leverage data for more proactive and predictive approaches.

• Support regulatory filings, audits and inspections, and other CMC activities.

Win

What we expect of you

Basic Qualifications

· Doctorate Degree and 2 years of biologics process development or commercial-scale technical support experience Or

· Master’s Degree and 6 years of biologics process development or commercial-scale technical support experience Or

· Bachelor’s Degree and 8 years of biologics process development or commercial-scale technical support experience

Preferred Qualifications

· 6+ years in a technical role supporting manufacturing processes or 8+ years as a project manager for cross-functional teams within regulated environments (i.e., cGMP)

· Strong oral and verbal communication skills, interact effectively with diverse internal and external (suppliers) stakeholders.

· Knowledgeable in regulatory filings authoring and inspections. Experienced in biopharma product end to end lifecycle management (e.g product team lead).

· Familiarity in MoF single use facility operational aspects of commercial biopharma manufacturing and proficient in big data analysis.

· Working experience with capital / engineering project from early stage to project turnover.

· Stakeholder Communication: Maintain clear and effective communication with all project stakeholders in multicultural working environment, including providing regular updates and managing expectations.

· Agility and Learning: Promote a culture of agility and learning within project teams, encouraging innovation and adaptability in a dynamic business environment.

Thrive

What you can expect of us

As we work to develop treatments that take care of others, so we work to care for our teammates’ professional and personal growth and well-being.

• Vast opportunities to learn and move up and across our global organization
• Diverse and inclusive community of belonging, where teammates are empowered to bring ideas to the table and act
• Generous Total Rewards Plan comprising health, finance and wealth, work/life balance, and career benefits

Apply now

for a career that defies imagination

In our quest to serve patients above all else, Amgen is the first to imagine, and the last to doubt. Join us.

careers.amgen.com

Equal Opportunity Statement

Amgen is an Equal Opportunity employer and will consider you without regard to your race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

We will ensure that individuals with disabilities are provided a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request an accommodation.

Responsibilities:

• Provide maintenance and support for Customers' IT Network Services.
• Hands-on experience in troubleshooting large, complex networks comprises of 10 to 20 nodes.
• Experience working with LAN/WAN/WLAN which include:

1. Cisco Wireless, Routers, Catalyst and Nexus Switches, Firepower, IPS/IDS, ISE, ASA, ESA, WSA, SMA
2. Alcatel Wireless and OmniSwitch
3. Arista Switches and Cloudvision
4. Fortinet, Checkpoint, SolarWinds NPM/NCM/NTA, F5 LTM and Aruba ClearPass
   

• Perform break-fix which include troubleshooting and problem identification for any network services.
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment.
• Perform the role of Project Lead / Coordinator in project management for small to medium size projects or Service Requests.
• Work closely with Service Delivery Manager to fulfil deliverables, service report and operational request.
• Establish TAC cases with the principal vendor for complex problem until its resolved.
• Mentor Tier 1 Engineers and conduct training to align the Engineers’ technical competency.

Requirements:

• Required to have minimum 3 – 5 years of hands-on network technical support experience in SI Environment.
• Cisco and Arista certification is preferred.
• Experience with LAN, WAN, WLAN, Data and Security networking in implementation, maintenance support and break-fix.
• Fast-paced environment
• Proven analytical and problem-solving abilities.
• Highly self-motivated and directed, with keen attention to detail.
• Experience working in a team-oriented, collaborative environment.
• Good communication and writing skills.
• Strong customer service orientation.
• Able to work in 24 x 7 standby duties

Work location: Jurong East

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

Responsibilities:

• Assist Piping Lead Engineer and execute the tasks assigned by Lead Engineer with no or minimum supervision.
• Lead a group of piping engineers and designers to execute the tasks assigned by Lead Engineer or/and monitor the work executed by engineering design house where applicable.
• Review and monitor engineering design progress related to piping work scopes.
• Prepare and raise technical query (TQF) and engineering variation order (EVO) related to piping for additional work scopes.
• Align the piping design output (such as piping isometric drawing, pipe spool drawing, etc) with construction team to ensure all the information required by construction teams are incorporated.
• Understand department and project specific design workflow.
• Understand Contract Specification and project requirement summary.
• Understand Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and piping routine requirements.
• Understand equipment layout plan (include escape route, maintenance space, mechanical handling, other equipment).
• Understand non-piping design related requirements such as fabrication, erection, painting, QA/QC, testing and commissioning.
• Responsible for ensuring that all works meet scope and technical quality of the project and comply with project requirements.
• Monitor P&ID revisions and ensure the compliance between piping 3D model with latest P&ID.
• Monitor design input need date and data required to execute the piping design works.
• Monitor 3D model clash and design review comments / punch lists.
• Monitor the comments from Client and Classification Society.
• Monitor all the piping related interface points.
• Monitor all the hotwork, tank’s coating and drydocking related activities where applicable.
• Monitor piping procurement status and surplus material due to drawing revision.
• Monitor all the hold items that affecting piping design completeness.
• Monitor and control the development of piping weight.
• Ensure proper communication and workflow are well established between piping stress team with pipe routine and pipe support designer team. Closely monitor the compliance between piping 3D model with the latest pipe stress analysis report.
• Review/comments piping arrangement, isometric and pipe supports drawings from piping designers.
• Review/comments on piping calculations carry out by other piping engineers/ subcontractors (e.g. pipe stress analysis report, flow master report, surge analysis report).
• Review/comments technical proposal from vendor.
• Review/comments vendor certified Document (VCD).
• Monitor and control drawing revisions especially when construction already started.
• Ensure proper communication and workflow are well established between piping designing team with construction team. Monitor the compliance between piping construction drawing (piping isometric and pipe support drawing) with the latest 3D model.
• Monitor the piping design database completeness (such as 3D model attributes, etc) to meet the project Digital Engineering requirements.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Onboard vessel to carry out inspection at site.
• Provide support to piping construction, QA/QC and other non-engineering design related activities such as inspection, coating, painting, welding, test packages, etc.

Requirements:

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Min. Bachelor Degree in Mechanical Engineering.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.
• Good knowledge in Piping Design.
• Good knowledge in International Standards related to Piping such as ASME, ASTM, API and Classification Society Rules and Regulations.
• Good skill in Excel is preferred.
• Experience in using AutoCAD, Naviswork, Smart Plant, Aveva, Cadmatic, etc. is preferred.

A welding supervisor in Singapore manages welding operations on construction sites, ensuring that projects are completed on time and within budget. Their responsibilities include:

• Supervising welding activities: Ensuring that welding work meets quality standards, project specifications, and safety protocols
• Scheduling and assigning tasks: Optimizing workflows to meet project timelines
• Inspecting welding work: Verifying that welding work is structurally sound and complies with regulatory standards
• Providing technical guidance: Training welders to improve their performance and skills
• Collaborating with other teams: Working with project managers, engineers, and other construction supervisors to integrate welding activities into the broader project plan
• Maintaining records: Monitoring and recording welding progress, equipment usage, and team performance
• Ensuring proper equipment use: Ensuring that welding equipment is properly used, maintained, and calibrated
• Identifying and addressing issues: Identifying potential issues on-site and taking corrective action
• Maintaining a safety culture: Enforcing health and safety regulations, promoting safe work practices, and conducting safety briefings

JOB TASKS AND SPECIFICATIONS

1. Recruitment and onboarding of new hires; assist with the recruitment process – review and shortlisted resumes, schedule interviews, facilitate pre-employment screening checks. Support the effective onboarding of new hires.
2. Employee Off-boarding; assist in off-boarding of leavers.
3. Maintaining physical and digital files for employees, and employee records in HRIS.
4. Assist in Work Pass (WP, SPass, EPass) application, renewal, and cancellation.
5. Keep track of staff confirmation, promotion, salary adjustment, Contract renewal, etc., and preparation of related letters.
6. Provide support to employees in various HR-related topics such as leave, benefits, compensation, claims, and queries related to systems, and resolve any issues that may arise.
7. Help to organize events and implement initiatives to promote employee engagement and develop a positive and cohesive culture.
8. Preparation of Monthly HR reports and consolidating of Regional HR reports for Quarterly Management meetings.
9. Administration of Medical and Flexi Benefits of Employee, including enrolment and terminations.
10. Completion of Surveys and MOM Business Census, if any.
11. Conduct salary benchmark
12. Other admin tasks and ad hoc duties as and when assigned by superiors.

JOB REQUIREMENTS

• Minimum 3 years of experience in a related field
• Hands-on experience with all work pass (WP, SP, EP) matters
• Microsoft Office skills (Excel and Words)
• Good interpersonal skills, positive attitude, and excellent team player
• Organize at work and have an eye for detail
• Strong verbal and written communication skills
• Good knowledge of statutory regulations

Fulfilship Pte Ltd is a growing e-commerce fulfilment company.

Our mission is to help SME grow and scale both domestically and internationally.

-Oversees a company's operational workflow, inventory, equipment and people.

-Resolve operational issues and disputes promptly, or prevent it from

even occurring.

-Maintain constant communication with managers, staffs, and

merchants to ensure proper operations of the company with brief

summary to the Management.

-Submit proposals or suggestions with supporting back up examples

which can improve the workflow and increase profit margins within

the organisation.

-Develop, implement, and maintain quality assurance protocols, this

includes a proper onboarding documentation process for all

departments (Operational Handbook).

-Increase the efficiency of existing processes and procedures to

enhance the companys internal capacity.

# 5.5 work days per week, OT when necessary.

# Mondays to Fridays: 9:00 am to 6:00 pm, excluding Sundays and Public Holidays.

# Saturdays: 9:00 am to 1:00 pm.

# Easily accessible: 3 bus stops away from Joo Koon MRT Station/Bus-Interchange.

# 10 days Annual Leave.

# Condusive working environment.

# Team Bonus/es.

Skills

Management Skills Multi Tasking Warehousing.

Overall responsible for the daily operations, including physical operations - receiving, storing, picking, packing, inventory management and worker-shift management.

Meet warehouse operational SLA's by general management, problem-solving and employee coaching/training.

Strong excel knowledge & passion to go above and beyond. ure operational efficiency, safety and accuracy.

Analysis of the data reports to identify performance bottlenecks and improve the performance.

Continuously improve the throughput and attain a sustained level of delivery performance improvement.

Strong excel knowledge & passion to go above and beyond.

What We Offer

Experience the Liebherr Culture and Belief of “One Passion. Many Opportunities.” Immerse in our diversified workforce and make a meaningful, real-world impact with our organisation. We offer a competitive starting salary along with comprehensive medical and dental benefits. Additional perks include two-way transportation provided to/from Clementi MRT, a friendly and nurturing environment and good work-life balance.

The Job

The primary focus of this position is to lead and manage the MRO operations (Pt 145), within the LSI Aerospace division. This position will provide key leadership and accountability for MRO operations and the overall performance of each employee of the department. As a key part of the management team, the MRO Operations Manager will be active in the definition, development and execution of operational policies, top performance, sustained growth and development of MRO activities for Liebherr products and services.

The position holder will be the key focal point for resolution of issues related to MRO operations beyond daily routine; as well as for the development of solutions according to (internal & external) customer requirements. Maintaining and improving overall performance, cost-effective operations and profitability will be the driving factors. This role requires management of requirements, processes, departments and employees, and establishment of solutions and activities to achieve results, based on goals and objectives directed by senior management of the Aerospace division.

What You Can Expect of the Job

• You’ll develop, assist & direct assigned managers to effectively lead department employees in achieving goals and objectives. Establish, maintain and improve operations and performance in line with company targets, and operational expectations to meet customer satisfaction goals.
• You’ll always maintain a safety conscious working environment, to meet or exceed industry and regulatory standards relative to Aerospace MRO operations.
• You’ll develop and implement continuous improvement initiatives (e.g. LEAN) to enhance profitability, productivity and efficiency of LSI MRO operations.
• You’ll implement and operate, in collaboration with other stakeholders (e.g. LSI finance controlling, sales, customer service, GM) tools and methodologies for management of relevant KPI, such as costs, efficiency, performance.
• You’ll develop and implement strategy, programs and initiatives to manage and improve employees’ attendance, knowledge, productivity, working skill sets, performance and retention, e.g. through developmental programs, and training.
• You’ll take a leading role in planning of budget, staff/skill development and related reviews, make recommendations relative to respective operations.
• You’ll oversee the facilities’ heavy mechanical & test equipment to ensure operational up time and minimize disruptions. Conduct risk assessment, make recommendations and implement scheduled maintenance for effective cost management of equipment.
• You’ll participate / assist in vendor negotiations and selection.
• Any other task assigned by the General Manager.

What We Expect of You

• Degree in Mechanical or Aeronautical Engineering (or equivalent) with at least 5 - 7 years with aerospace MRO and/or OEM engineering experience and at least 3 - 5 years of demonstrated leadership track record.
• Good knowledge of processes (production and/or repair), technologies, aircraft components (e.g. pneumatic, hydraulic, heat exchangers, avionics/electronics, composites) and subsystems (e.g. air management, flight control and actuation, landing gear).
• Solid experience in repair and overhaul processes, procedures, technologies. Good understanding of repair station environment operating under relevant regulatory standards (e.g. FAA, EASA, CAAS, CAAC).
• Sufficiently qualified, experienced and eligible for approval by the regulatory authorities.
• Strong analytical skills in examining, assessing and re-engineering operations and procedures, formulating, developing and implementing policies and procedures.
• Commitment to foster a cooperative work environment; lead in conflict avoidance/resolution and mediation skills
• Strong interpersonal and communication skills and demonstrated ability to work effectively with a wide range of stakeholders at various hierarchical levels.
• Practical proficiency in relevant ERP/IT applications, such as MS office suite, BaaN, e-Lirom.
• Required to attend meetings, seminars, exhibitions, customers’ visits, product training and company functions.
• Required to travel in support of business activities.
• Exposed to a combination of normal office and shop environments

Who We Are

Liebherr-Aerospace is a leading European manufacturer and global supplier of Air Management, Flight Control, Actuation and Landing Gear systems as well as Gearboxes. Liebherr-Aerospace’s dedicated regional service centre, Liebherr-Singapore, provides a wide range of support services to the aviation industry in Asia-Pacific.

• The Aseptic Operations leads all compounding and sterile fill activities. The role is also responsible for secondary packing of final finished goods.

• Ensuring safe work environments, enforcing operational discipline, and monitoring aseptic behaviors.

• Efficiently utilize tools and metrics (KPI’s) to monitor staff productivity, deliverables, timelines, and quality of work product to adjust staffing levels and operational processes as needed to ensure operational effectiveness.

• Support investigations, own CAPAs, and drive continuous improvements throughout operations.

• Responsible for developing staffs’ performance goals, maintaining positive employee morale and relations and managing paid time off

• Understanding of the importance/impact of cGMP standards.

• Responsible for handling disciplinary actions and/or Performance Improvement Plans, terminations, escalating complex employee issues to their manager or human resources and ensuring a fair and consistent approach with all team members.

• Identifying potential process/product improvements and working collectively with cross-functional teams to implement process/procedure updates.

• Demonstrates strong industry knowledge and comprehensive understanding of business processes.

• Demonstrates technical/functional expertise in applicable discipline and acquires knowledge in related disciplines.

• Utilize industry technical/functional experience to help develop standard operating procedures.

REQUIREMENTS:

• Able to establish robust processes, develop performance standards, track performance through fact driven exercises, and implement solutions to drive continuous process improvements.

• Demonstrates skills to solve complex problems in highly regulated environments.

• Previous experience working with auditors, inspectors, and regulatory agencies.

• Able to articulate difficult and complex situations in a comprehensive and succinct manner utilizing professional tools, and deliberate facts.

• Ability to drive a culture of partnership and accountability.

EDUCATION & EXPERIENCE :

• Minimum of a Bachelor Degree in a life science, pharmacy, or engineering discipline required. Advanced degree/certification preferred. It will be an advantage to the candidate if he/she is a registered pharmacist in Singapore.

• 5-8 years manufacturing or engineering experience, preferably in sterile manufacturing and a good understanding of quality and compliance standards of various agencies, including US-FDA, European EMA and China NPMA.

• 3-5 years management experience; with no fewer than 20 direct/indirect reports.

• Proven effective verbal and written communication skills

• Experience working with SAP, QMS such as TrackWise

Stashworks Pte. Ltd. is a growing e-commerce fulfilment company.

Our mission is to help SME grow and scale both domestically and internationally.

Roles and Responsibilities

-Oversees a company's operational workflow, inventory, equipment and people.

-Resolve operational issues and disputes promptly or prevent it from even happening.

-Maintain constant communication with managers, staff, and merchants to ensure proper operations of the company with brief summary to the Management.

-Submit proposals or suggestions with supporting back up examples which can improve the workflow and increase profit margins within the organisation.

-Develop, implement, and maintain quality assurance protocols, this includes a proper onboarding documentation process for all departments (Operational Handbook).

-Increase the efficiency of existing processes and procedures to enhance the companys internal capacity.

Skills

Overall responsible for the daily operations, including physical operations - receiving, storing, picking, packing, inventory management and worker-shift management.

Meet warehouse operational SLA's by general management, problem-solving and employee coaching/training.

On-site coordination with operations backend teams to ensure operational efficiency, safety and accuracy.

Analysis of the data reports to identify performance bottleneck and improve the performance.

Continuously improve the throughputs and attain a sustained level of delivery performance improvement.

Strong Excel knowledge and passion to go above and beyond.

Proficient in Management Skills Multi Tasking Warehousing will be better.

# 5.5 work days per week, OT when necessary.

# Mondays to Fridays: 9:00 am to 6:00 pm, excluding Sundays and Public Holidays.

# Saturdays: 9:00 am to 1:00 pm.

# Easily accessible: 3 bus stops away from Joo Koon MRT Station/

bus-Interchange.

#10 days Annual Leave.

# Condusive working enviornment.

# Team Bonus/es.

Stashworks Pte. Ltd. is a growing e-commerce fulfilment company.

Our mission is to help SME grow and scale both domestically and internationally.

Roles and Responsibilities

-Oversees a company's operational workflow, inventory, equipment and people.

-Resolve operational issues and disputes promptly or prevent it from even happening.

-Maintain constant communication with managers, staff, and merchants to ensure proper operations of the company with brief summary to the Management.

-Submit proposals or suggestions with supporting back up examples which can improve the workflow and increase profit margins within the organisation.

-Develop, implement, and maintain quality assurance protocols, this includes a proper onboarding documentation process for all departments (Operational Handbook).

-Increase the efficiency of existing processes and procedures to enhance the companys internal capacity.

Skills

Overall responsible for the daily operations, including physical operations - receiving, storing, picking, packing, inventory management and worker-shift management.

Meet warehouse operational SLA's by general management, problem-solving and employee coaching/training.

On-site coordination with operations backend teams to ensure operational efficiency, safety and accuracy.

Analysis of the data reports to identify performance bottleneck and improve the performance.

Continuously improve the throughputs and attain a sustained level of delivery performance improvement.

Strong Excel knowledge and passion to go above and beyond.

Proficient in Management Skills Multi Tasking Warehousing will be better.

# 5.5 work days per week, OT when necessary.

# Mondays to Fridays: 9:00 am to 6:00 pm, excluding Sundays and Public Holidays.

# Saturdays: 9:00 am to 1:00 pm.

# Easily accessible: 3 bus stops away from Joo Koon MRT Station/

bus-Interchange.

#10 days Annual Leave.

# Condusive working enviornment.

# Team Bonus/es.