• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Responsibilities:

- Systems design and selection of equipment instrumentation and controls.

- Reviewing of customers’ specifications requirement and drawings.

- Define specifications and scope of work to contractors.

- Startup, testing, commissioning and troubleshooting of plants.

- Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control. - Responsible for Single Line Drawing, Control Schematic drawings. - Develop engineering capabilities and work with sales team on project proposal and bidding.

- Reviewing of customers' specifications and drawings.

- Execution of projects.

- Preparation of tender activities.

Requirements:

- Recognised degree by PE Board in Electrical / Instrumentation Engineering.

- Minimum 3 years relevant working experience, preferably with experiences in FEED of LV/MV switchboards, MCC, MCB, Control Panels etc and in Water & Waste Water industries.

- Knowledge in Instrumentation and Control.

- Able to read & understand single line diagram and generate Bill of Materials from single line diagram.

- Knowledge on control, schematics, motor controls and materials take-off.

- Proficient in AutoCAD, Microsoft Office.

- Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.

- Those with relevant project management, process design, and service & maintenance experience will be an added advantage.

*** Please apply with detail resume, stating present and expected salary, date of availability and/or notice period required.

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

The Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

Operations Executive for a Glass Processing Company

Job Description & Requirements

• Assist and take charge of daily operational work, which can includes administrative, supply chain and production duties
• Following up with client's sales enquiries and following up on leads
• Handling of projects from start to end
• Liase with production team on orders and supply chain management
• Prepare, organize, collate and submit all required operational and HR documentation to achieve compliance guidelines and deadlines
• Forecast, plan and deploy manpower duties and schedules to meet the production requirements
• Support and track submission of reports, quotations, orders, fulfilment

Responsibilities:

• Develop membrane products, systems and processes for the applications in separation processes, e.g. Nano-filtration, Ultra-filtration etc.
• Execute product development process from bench-scale through commercialization, and continue technical support throughout production.
• Plan and execute lab, pilot and field tests.
• Interact with customers/clients/collaborators to identify new needs and initiate solutions.
• Work with R&D and business units to screen ideas/technologies and conceive technology solutions.
• Work with internal resources, suppliers and development partners to execute projects.
• Cross department and subsidiary or sister companies’ coordination and communication to ensure aligned execution of pilot test project.
• Document project work and report out to management.
• Close working with production team to understand existing product characteristics and explore for any potential application.
• Familiarize with the existing production process and support quality team on documentation preparation.

Requirements:

• Minimum Diploma/ Degree in Environmental Engineering, Chemical Engineering, or equivalent
• Proven strong team player with good interpersonal and communication skills
• Experience in membrane development, pilot testing, or water and wastewater treatment is highly desirable
• Microsoft words, excels, power point literate
• Fresh graduates may apply

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As an Associate Process Engineer, you will work on monitoring and sustaining process / SPC to ensure quality of products are meeting specification.

Your Job:

• Analyze SPC charts using SPACE
• Respond to all PR rules and follow CAS correctly.
• Work on basic annotation and achieve quality troubleshooting rate for SPC OOC points.
• Monitor all qualified processes using SPC and other statistical tools.
• Perform shift duties (12-hours shift) to support the running of production in the Module and ensure that integrity of the tools is in place to run the process.
• Assist Engineers in the qualification and fine tune of new processes and new equipment for production.
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements, and programs

Required Qualifications:

• Diploma in any Engineering streams
• Experience in wokring with Electronics / Manufacturing sectors
• 1-2 years of experience in working with SPC tools
• Good understanding of the SPACE
• Willingness to work in weekend / rotational shifts

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Introduction:

We are expanding our Fab Operations and are looking for Process Engineers, in this role you will sustain and improve process / SPC to meet quality, cost, productivity requirements. Process improvement to eliminate inherent process weakness to achieve company goals.

Your Job:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance.
• Do proper annotation to maintain quality troubleshooting rate for SPC OOC.
• Understand Cp and Cpk indices.
• Monitor critical SPC charts daily.
• Perform process window study and provide improvement plan to reduce OOC and improve CPK.
• Review ESPC charts using SPACE.
• Know all the rules for ESPC.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Raise PCRB and understand the requirement for PCRB opening, follow through with qual plan, analyze data using required software and CR closure.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues.
• Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline.
• Work closely with Equipment Engineer on new equipment acceptance.

Required Qualifications:

• Degree in electrical / electronic / Mechanical / Microelectronics / Chemical process Engineering / Chemistry / Physics
• 2 years of working experience in electrical / electronics industry
• Team Player
• Good ownership and accountability
• Good verbal and written communication skills
• Flexible and able to support overtime
• Self motivated, meticulous, and discipline
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Job responsibilities:

• Assist the Sales Team in reviewing technical documents and providing feedback.
• Prepare accurate cost estimates based on customer specifications and drawings.
• Generate quotations and perform follow-up actions to close sales.
• Provide technical and engineering support to sales personnel.
• Respond promptly to customer inquiries and technical specifications.
• Offer technical assistance to customer service related to product issues.
• Monitor and update the status of sales quotes and proposals.
• Update and maintain the costing master list.
• Assist in sourcing new materials and suppliers as required.
• Ensure compliance with QMS (Quality Management System), EHS (Environmental Health and Safety), and L&E (Labor & Ethics ) procedures.
• Support various sales-related projects and tasks as assigned.

Requirements:

- Diploma in Mechanical Engineering

- Preferably with 2 – 3 years working experience in the printing/label industries an advantage

- Proficient in Microsoft office and IT savvy

- Driven with positive mentality, strong initiative and a team player

- Resourceful, meticulous, willing to be hands on

- Possess strong communication, interpersonal, coordination and customer service skills

- Willing to learn and able to work under pressure in a fast pace environment

Responsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTOResponsibilities:

· Assist the project manager with on and off site meeting pertaining to the technical issues

· Responsible for submission of Architectural samples, shops drawing and other related documents to the consultants or authorities

· Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

· Proven problem solving and achievements work progress according to the work schedule

· Site supervision and able to coordinate well with sub-contractors, RE and RTO

Requirements:

· Degree in Civil/Structural Engineering (recognized by Singapore PE Board)

· Minimum 5 years’ of precast experience in commercial and condo building projects

· Meet customers and generate enquiries to develop potential spare parts / maintenance contract business, build and develop assigned accounts and relationship, site assessments, etc.

· Hunt for new potential customers, via cold calls, to meet and exceed sales order Intake.

· Promote sales of new pumps / replacements, spare parts (i.e., pump parts and mechanical seals) and maintenance contracts, to new and existing customers.

· Attend promptly to enquiries and understand customers’ needs in order to fulfil their requirements.

· Validate on commercial and technical requirements before generating quotations to customers, with close follow-ups up till quotation status being closed.

· Assist Sales Manager in strategic planning and statics collection for the sales progress.

· Correspond with factories, KSB companies and contractors / dealers for support; in relation with terms of price, technical support / service, and delivery.

· Utilise and update CRM (C4C) database on registered products to installed base and customer visits records.

· Ensure proper handover of purchase order (in terms of technical and commercial with supporting document / costing sheet) to sales admin for order processing.

· Any other ad-hoc duties as per assigned by HOD.

Roles & Responsibilities:

• Responsible for analysing wastewater samples using various analytical lab methods
• Perform lab equipment maintenance, troubleshooting, and calibration
• Develop methods for wastewater treatment according to customer’s requirements
• Develop test plans, drive testing execution, analyze, document results, and report to respective PIC.
• Lead and guide technician(s) priority, workload, technical understanding
• Learn critical market drivers/needs and understand product applications
• Manage projects or sub-projects including timelines and budgets and work in an interdisciplinary team
• Consolidate and analyse data for process quality control and reporting purposes, ensure compliance with relevant standards and regulatory requirements
• Facilitate laboratory equipment, accessories, and consumable purchase and inventory management
• Developing and maintaining an effective laboratory workforce by constantly improving work methods

Job Description:

• Oversee the day-to-day operations of facilities, ensuring a safe, efficient, and well-maintained environment.
• Coordinate maintenance and repair activities for buildings, grounds, and equipment.
• Manage relationships with external vendors, contractors, and service providers.
• Implement and enforce health and safety protocols.
• Identify cost-saving opportunities, and ensure fiscal responsibility.
• Implement energy-saving initiatives and sustainable practices.
• Implement and promote environmentally sustainable practices.
• Address tenant or employee concerns related to facilities.
• Maintain accurate records of facility-related activities.
• Generate reports on maintenance, expenditures, and key performance indicators.
• Execute maintenance projects, including preventive maintenance, equipment upgrades, and infrastructure improvements.
• Follow project scopes, timelines, and budgets, ensuring that the project milestones are met.
• Coordinate with internal teams to ensure the timely completion of projects.
• Monitor and report project progress and suggest necessary adjustments to ensure objectives are achieved.

Qualifications:

• Diploma or Degree in Engineering or equivalent.
• Minimum 2 years’ experience in M&E.

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Your Job:

• Plan and execute all Preventive Maintenance regime for Mechanical related system.
• Supervise and coordinate work with vendors on Preventive Maintenance, Corrective Maintenance, Breakdown Maintenance and Ad-hoc Maintenance.
• Assist system Engineers on Mechanical system trouble shooting such as, process exhaust system, HVAC, Chilled Water system, Chilles etc.
• Assist Engineer in coordinating general mechanical repair works such as motors, pumps bearing replacement, pumps mechanical seal replacement, heat exchanger cleaning, pump overhaul etc.
• Assist Engineer in Mechanical predictive maintenance work such as vibration monitoring.
• Assist Engineer Corrosion control program such as piping thickness monitoring, corroded piping replacement program, equipment structure in cooling tower, scrubber yard, roof top area.
• Specialize in one of the M & E, systems to improve, enhance PM activities and provide suggestion on system design.
• Attend all schedule training for GlobalFoundries compulsory courses and in-house training conduct by vendors.
• Participate in weekly meeting for job planning, outstanding works/issues discussion and share knowledge and group discussion on resolving issues or incident.
• Prepare daily Permit to Work and verify on site and ensure good housekeeping before and after maintenance works.
• Ensure safety regulations are complied.

Required Qualifications:

• ITC / Diploma / Degree course (Mechanical / Electrical & Controls / Chemical Engineering
• At least 2 years of work experience on M&E
• Hands-on working skills e.g., troubleshooting skills

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Responsibilities:

1. Mandatory Reporting & Compliance (ECA, WEMP, GHG, etc.)

• Prepare and submit Energy Management System (EnMS) reports.
• Ensure compliance with Minimum Energy Efficiency Standards (MEES) for water-cooled chilled water systems.
• Update and submit the Energy Efficiency Improvement Plan (EEIP) and Energy Reports as per regulatory requirements.
• Conduct annual energy reviews and support ISO50001 certification processes.
• Monitor and report water usage including recycling and reuse systems.
• Analyze GHG emissions data monthly and prepare yearly submissions for third-party verification.
• Report on Corporate Environmental Performance Management (CEPM) and align with Net Zero and Renewable Energy targets.

2. Corporate Environmental & Sustainability Initiatives:

• Track and report environmental indicators such as power, water, and waste consumption.
• Develop gap analyses and enhancement plans to improve eco-efficiency and recycling rates.
• Support corporate audits and sustainability projects, and environmental goal tracking.

3. Facility Monitoring & Data Management:

• Integrate facility monitoring systems into the Maintenance Management System (IFMS Dashboard).
• Develop automated preventive maintenance schedules and inventory tracking.
• Oversee daily monitoring logs and production support using SharePoint for data analysis and reporting.

Requirements:

• Degree in Environmental Science, Sustainability, Engineering, or a related Engineering field.
• Proven experience in Energy Management, Environmental Sustainability, and Corporate Responsibility reporting.
• Strong technical skills in data analysis, with proficiency in tools such as BMS, SharePoint, and digital metering systems.
• Excellent communication and reporting skills with attention to detail.
• Experience in maintenance management systems and facility monitoring tools.
• Knowledge of regulatory frameworks such as NEA and PUB compliance standards.
• Familiarity with ISO50001, GHG Protocol, and other sustainability frameworks will be an advantage.

For over 50 years, SCIEX has been developing groundbreaking technologies and solutions in mass spectrometry and capillary electrophoresis. Our products enable our customers to quickly respond to environmental hazards, better understand biomarkers relevant to disease, improve patient care in the clinic, bring relevant drugs to market faster and keep food healthier and safer. At SCIEX, you’ll find a rewarding role that amplifies your impact on the world and helps you realize life’s potential.

SCIEX is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

Learn about the Danaher Business System which makes everything possible.

Are you looking to use your knowledge and experience to empower our customers to solve the most impactful analytical challenges in quantitation and characterization?

The Manufacturing Test Engineer is responsible for setting up an efficient manufacturing test process by developing procedures (automated testing) to test mass spectrometer instruments and improving First Pass Yield continuously to meet the organization objectives. You will gain new product knowledge of mass spectrometer in theory and practical as well as enhancing your technical competency in engineering fields.

This position is part of the Manufacturing Engineering Department and will be located in Marsiling Industrial Estate, Singapore.

In this role, you will have the opportunity to:

• Develop the commissioning and final tests procedures (automated testing) to meet system requirements.
• Improve and modify manufacturing test software.
• Apply Problem Solving Process to define problem statements, investigate to root causes, verify countermeasures and ensure sustainment.
• Improve the First Pass Yield and parts DPPM failures in Manufacturing.
• Assist instrument installation escalation calls in the field through site visit/remote access if required.
• Expand PCBA troubleshooting skills to detect defective Electrical/Electronics components.
• Perform First Article Evaluation of Electrical/Electronic parts and software.

The essential requirements of the job include:

• Degree in Electrical and Electronics Engineering.
• 1-2 years of experience working in ISO 13485 manufacturing environment. Fresh graduates are encouraged to apply.
• Hands on experience in using measuring equipment like digital multimeter, oscilloscope, function generators, etc. during his/her university studies.
• Understand PCBA manufacturing process, able to read the PCBA schematic diagram and perform troubleshooting.
• Good knowledge in analog and digital electronics is desired.

Travel, Motor Vehicle Record & Physical/Environment Requirements:

• Ability to travel to North America for 1-2 months during project.
• Ability to lift, move or carry equipment up to 10kg daily.

It would be a plus if you also possess previous experience in:

• IPC-610 on Printed Circuit Board Assemble manufacturing process
• Operation and Application on mass spectrometer instruments

SCIEX, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at danaherbenefitsinfo.com.

N/A

At Danaher we bring together science, technology and operational capabilities to accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. Our global teams are pioneering what’s next across Life Sciences, Diagnostics, Biotechnology and beyond. For more information, visit www.danaher.com.

At Danaher, we value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction

ESD and latchup development engineer to work on Singapore technologies including by not limited to 180nm through 40nm programs developing novel ESD device solutions. Position will include customer interface/support, defining/implementing ESD and latchup test structures, characterizing and modeling ESD devices and producing ESD design guides used to support customers.

Your Job

· ESD device design rule and high current model release for 180~28nm CMOS/BCD technology

· HV (12~85V, 100/200V) ESD device development and characterization in 180~28nm CMOS/BCD technology

· ESD device compact modeling

· ESD reference guide creation

· Customer support for ESD inquiries

· ESD device TCAD simulation

Required Qualifications:

· PhD in Electronic Engineering, Master/Bachelor degree in Electronic Engineering

· Good Team player

· Working in Singapore

Preferred Qualifications:

● Python

● C++

● VLSI study and intern experience

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As device modeling engineer, the candidate is to analyze/interpret test results, develop and deliver SPICE models for Process Design Kits development. Candidate should have strong interests and willing to learn Semiconductor physics and able to work with various departments/customers to deliver final product or to resolve issues. The quality of our delivery plays an important role in a customer’s 1st time design success.

Your Job:

• Analyze and represent semiconductor devices with industry standard models.
• Applies knowledge of semiconductor physics and devices to evaluate and analyze test results
• Works closely with device and other modeling engineers to interpret test results and debug device and measurement issues
• Prepares reports summarizing results or to make technical recommendations.
• Work and collaborate other projects and/or assignments as needed
• Some basic programming is needed for data analysis. Preferred python

Other Responsibilities:

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications

• Bachelor's in Electrical & Electronics Engineering or Masters degree
• Min 2 Years of Experience
• Open to considering candidates with no prior experience
• Please indicate % of travel 0%
• Fluency in English Language – written & verbal

Preferred Qualifications:

• Master's in Electrical & Electronics Engineering

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add a Senior Engineer, Facility Engineering in Singapore. The position will be based in our GES Site in Marsiling.

As a Senior Engineer, Facility Engineering, you will:

Lead in Facilities Management (FM) on soft and hard service for site. Planning and scheduling in carrying out daily facilities support functions for Facilities Management. Possess experience leading a small team of both administrative/technical staff. Lastly, experienced in energy saving and improvement and Project Management (Renovations)

The key responsibilities are as below:

• Experience in Integrated Facilities Management in both soft and hard services.
• To take up as site Fire Safety Manager as requirement set by SCDF.
• Daily building walkabout to pick up and address maintenance and safety gaps.
• Coordination and effective communication with internal users, service partners as well as vendors for work.
• Prepare site related SOPs and guides to train technical personnel.
• Able to prepare Request for Quotes, source quotations and to prepare justification and summary papers for management approval.
• Raise Purchase Request / executive summary for management approval.
• Assist in preparing Master Maintenance Schedule, follow up maintenance schedule
• Ensure work delivery is of highest quality from vendors.
• Coordinate closely with HQ FM on Facilities Management approaches.
• Conduct tool box / safety briefing to vendors before commencement of work.
• Submission of Monthly Management Report (MMR) and ESG monthly reports.
• Respond to internal customer and external vendors service enquiries and closing.
• Perform any other duties relating to facilities management as assigned by the Company.

What skills and experiences are we looking for?

• Degree in Engineering / Facilities Management.
• Manufacturing environment / Managing Agent background preferred.
• With at least 5 to 8 years relevant experience in Facilities / Building environment.
• Problem solving with good solution approach to work and staffing matters.
• Fire Safety Awareness Course
• WSHO (Advantageous but not a must)
• Effective communicator, highly resilient and able to work under pressure
• Hands on in equipment maintenance and trouble-shooting.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Overall Job Objectives

Assists the PM to oversee the construction activities, progress, planning, implementing, and monitoring of work schedules in accordance with the master and detailed work programme

Core Responsibilities

1. Attend site meetings and inspection

2. Preparation of documentation including project status report, method of statement and work procedure for the project.

3. Planning, executing, monitoring and control of the project.

4. Liaising and coordinating with all parties such as clients, consultants, consultants’ representatives, site supervisors, and sub-contractors

5. Handing of technical and engineering problems

6. Supervise ongoing site activities closely

7. Ensuring that the quality control of the project is met

8. Ensure that all the construction safety rules and regulations are being observed

9. Prepare necessary work and safety permits, submission documents and drawings once work are completed.

10. Any other ad-hoc tasks assigned

Job Specifications

1. Degree in Engineering or related disciplines

2. Able to read/understand/execute work based on construction drawings

3. Good communication, interpersonal and collaboration skills

4. Minimum 3 years of relevant experience.

Brief Summary (of the role):

Edmund Optics Singapore is moving towards increasing process automation and is looking for an Automation Engineer with the passion and interest to learn and contribute in transforming current processes with automated solutions to enhance our competitiveness in the high-end optical components market. He/she will be working closely with internal and external partners.

Job Description (of the role):

· Assist the design, development, configuration and implementation of mechanical/electronic systems, which will optimize efficiencies, stabilize yield and enhance EO’s capabilities, from concept to pilot

· Recommend, acquire, implement and optimize mechanical/electronic components

· Provide timely support to the relevant OPs teams on the running of processes through pilot phase and into production phase and create and maintain solution documentation

Qualifications Required:

· Degree in Mechanical Engineering, Mechatronics, Electrical and Electronics Engineering or other relevant Engineering or Physics field

Skills & Abilities Required:

· Proven track record of developing and implementing automation solutions

· Demonstrable experience setting up programmable logic controller (PLC), single-board computers and/or robotic or automated systems, preferably in an industrial environment would be advantageous

· Results oriented and possessing a hands-on attitude

· Solid team player, strong interpersonal skills in a multidisciplinary and multicultural environment

· Analytical problem solving and attention to detail

· Highly self-driven and ability to work independently

For interested applicants, please send your resume to [email protected]

Technical Engineer

Key Responsibilities

1. System Design and Development

· Design and implement solutions involving barcode scanners, RFID readers, and card-based access control systems.

· Develop integration plans for speedgates with these technologies to ensure seamless functionality.

· Evaluate and recommend appropriate hardware and software solutions to meet project requirements.

· Create technical documentation, including schematics, workflows, and system architecture.

2. Installation and Configuration

· Configure and install barcode scanners, RFID readers, and access control card systems.

· Oversee the physical installation of speedgates and their associated components.

· Calibrate devices for optimal performance and accuracy.

· Ensure compliance with safety and security standards during installation.

3. Integration

· Integrate barcode, RFID, and card systems with speedgates and other access control systems.

· Implement software and firmware updates for all components.

· Develop APIs or use existing interfaces to connect devices with management software or enterprise systems.

4. Troubleshooting and Maintenance

· Perform diagnostics on malfunctioning devices or systems to identify and resolve issues.

· Conduct regular maintenance on barcode scanners, RFID readers, card systems, and speedgates.

· Monitor system performance and propose upgrades or replacements when needed.

· Respond to technical support queries and provide on-site or remote assistance.

5. Testing and Quality Assurance

· Conduct tests to validate the accuracy and reliability of barcode and RFID readings.

· Ensure the synchronization of all integrated systems, including speedgates.

· Perform stress testing to confirm the system's ability to handle high traffic and loads.

6. Project Management and Collaboration

· Collaborate with architects, developers, and security teams to deliver integrated solutions.

· Manage timelines, budgets, and deliverables for related projects.

· Train end-users and provide documentation for system operation and troubleshooting.

7. Innovation and Research

· Stay updated on emerging technologies in barcodes, RFID, and access control systems.

· Explore opportunities for automation and efficiency improvements using these technologies.

· Recommend innovative solutions that enhance operational efficiency and user experience.

---

Required Skills

· Strong understanding of barcode technologies (e.g., QR codes, linear codes) and RFID systems (active, passive tags).

· Proficiency in card system technologies, such as smart cards and magnetic stripe cards.

· Knowledge of speedgate mechanics and automation.

· Programming skills for system integration (e.g., Python, C++, Java, or relevant API languages).

· Familiarity with networking and data communication protocols (TCP/IP, Wi-Fi, NFC, etc.).

· Hands-on experience with diagnostic tools and troubleshooting.

We are seeking a talented and motivated Software Engineer to join our dynamic team. In this role, you will contribute to the development and enhancement of cutting-edge software solutions tailored for high-tech products in the semiconductor manufacturing industry. Collaborating closely with the Software Manager and an Agile Scrum team, you will be instrumental in designing, implementing, and optimizing robust software applications that integrate seamlessly with advanced hardware systems.

Key Responsibilities:

• Design, develop, and enhance software architecture for scalable, high-performance applications.

• Integrate hardware control systems and sensor data acquisition modules into the software platform.

• Work closely with team members in a Scrum environment, reporting progress to the Software Manager.

• Write, debug, and maintain high-quality source code, and conduct comprehensive unit testing to ensure software robustness.

• Present developed features to stakeholders, including team members and product managers, and incorporate feedback for continuous improvement.

• Provide technical support and on-site debugging to resolve issues as needed.

Requirements:

• Bachelor’s, Master’s, or Ph.D. in Computer Science, Computer Engineering, Electronics, Automation, or a related technical field from a recognized institution.
• At least 5 years of hands-on programming experience in C#, .Net/WPF, and C++ on the Windows platform.
• Proven expertise in object-oriented design patterns for scalable, high-performance software applications.
• Significant experience in integrating commercial system software with hardware in production environments.
• Proficiency in multithreading technologies.
• Experience with digital data acquisition and data processing using high-speed digitizer cards, frame grabbers, or similar technologies.
• Familiarity with capital equipment especially defect inspection and metrology machines.
• Experience in factory automation and MES development is highly advantageous.
• Prior experience working in Scrum Agile development teams is preferred.

If you are passionate about developing innovative software solutions, thrive in a collaborative environment, and aspire to make an impact in the semiconductor manufacturing industry, we invite you to be part of our team. Take this opportunity to shape the future of high-tech solutions with us!