Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Principal Engineer, Supplier Quality is responsible for driving Quality performance of the suppliers to meet Sciex Product Quality requirements through supplier qualification processes, supplier control processes, aligned with supplier management strategies.

This position reports to the Senior Manager Supplier Quality and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Drive improvement of quality performance of suppliers and support NPD/NPI project, ensure resolution of the issues identified in NPI.
• Lead supplier qualification activities for new suppliers with Global Sourcing & Global Supply Chain.
• Plan and execute periodic audits at suppliers' site to ensure suppliers' QMS is meeting ISO standards, IPC standards, FDA QSR (GMP) and compliance to agreed process control plans
• Monitor supplier performance, review periodic quality data/reports/scorecards and related action plans
• Drive resolution of complex material quality issues by deep diving suppliers' root cause analysis and by working with suppliers to monitor corrective action and facilitating with internal support where required.

The essential requirements of the job include:

• Degree in Electrical/Electronics/Mechanical Engineering with of 5-8 years related experience in Supplier Quality Management, Process Engineering is preferred
• In Depth knowledge of PCBA manufacturing processes, familiar with IPC 610 standards
• Demonstrated experience on the performance of audits, lead-auditor certification preferred
• Familiar with problem solving tools such as 5 why root cause analysis, and Quality tools such as DFM, PFMEA, GR&R, Control Plan, SPC.
• Knowledge of ISO 9001, ISO13485 and FDA 21 CFR Part 820 will be added advantage

Travel Requirements:

• Ability to travel – 20-30%, and maybe travel on short notice

It would be a plus if you also possess previous experience in:

• Managing suppliers including supplier evaluation and supplier performance
• Broad knowledge of manufacturing operations and quality system practices in a Medical Device or Pharmaceutical company is preferred

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.

• Working Days: Monday - Saturday
• Working Timing: 0830am - 530pm
• Office Location: Sungai Kadut (Near Kranji)
• Salary range: $3500-$4500

Responsibilities

Project Management

• To resolve all technical and non-technical issues during the project lifecycle.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Minimize material wastage on-site and maximize machinery/equipment usage.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Achieve targeted progress of works to ensure the intended cash flow.

Technical Understanding

• Fully understand project drawings and scope of work.
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification may be considered for Project Manager post.

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

• Working Days: Monday - Saturday
• Working Timing: 0830am - 530pm
• Office Location: Sungai Kadut (Near Kranji)
• Salary range: $2500-$3500

Responsibilities

Project Management

• To resolve all technical and non-technical issues during the project lifecycle.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Minimize material wastage on-site and maximize machinery/equipment usage.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Achieve targeted progress of works to ensure the intended cash flow.

Technical Understanding

• Fully understand project drawings and scope of work.
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Project Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Perform activities such FAT/SAT and Installation verification for new equipment and modification of existing equipment.
• Review of Vendor Turnover Packages and Construction Trade Turnover Packages.
• Review Functional specifications
• Assist with execution of qualification protocols for IQ, OQ.
• Draft and execute commissioning protocols related to production equipment in upstream/downstream processes
• Support Change Control and deviation management processes
• Coordinates with other departments for efficient completion of projects.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Working Day: Mondays to Fridays: 8:30am to 6pm

Salary: $6800 – $8500

Location: Pandan Road Singapore (Clementi)

(We have company bus departing near Clementi MRT station)

Responsibilities:

• Report to the Project Director / Manager in charge of the WTW system.
• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Requirements:

• Min Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.
• Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

Job Description

• Perform process design for chemical plants, storage terminals, industrial waste facilities in basic design, FEED and detailed engineering stage.
• Responsible for developing process engineering deliverables including PFD, P&ID, calculation reports, heat and mass balance, system descriptions, line list, simulation model, utility consumption list, process control philosophy, etc in accordance with project requirement and applicable codes/standard.
• To carry out process calculations such as hydraulic calculation, surge analysis, heat transfer calculation, pressure relief and blowdown analysis, utility consumption calculation, equipment sizing, etc.
• Develop firefighting design philosophy, fire water/foam demand calculation and fire water/foam network hydraulic simulation as per local regulation and international code/standard.
• Develop design basis and UFD for utility supply system and wastewater handling system.
• To participate in design review, Process Hazard Analysis, SIL Studies, 3D Modeling review and prepare close-out reports when required.
• Work closely and co-ordinate with other engineering disciplines for preparation of process deliverables and provide process parameter input as required.
• Provide regular update to Lead Process Engineer, Process Manager and Engineering manager on process related technical and engineering issues.

Requirements:

• Diploma and Bachelor’s Degree in Chemical,Process Engineering or equivalent
• Team player with strong analytical and communication skills
• Minimum 3 years of experience in oil & gas/petrochemical/water treatment /chemical plants
• Fresh Graduates are also welcome to apply

Roles & Responsibilities

• Assist in site acceptance tests, commissioning, and startup of transformers and switchgear (knowledge of UPS, VSDs, and PLCs is a plus).
• Perform preventive maintenance, repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide on-site technical support and post-sales solutions to customers.
• Resolve on-site repair and maintenance issues effectively.
• Share field feedback to improve and develop products.
• Manage procurement of spare parts from suppliers.

Job Requirements

• Field service experience, with hands-on skills to work independently on-site.
• Strong communication and analytical abilities.
• Willing to travel for business trips.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Key Responsibilities:

• Design power supply hardware (and/or embedded firmware) for various switching mode power converters (PFC, Flyback, Forward, Buck, Boost, Resonant topologies including LLC, series resonant, and Synchronous Rectification), ranging from 1,000W to 22,000W, for on-board/off-board charger.
• Theoretical analysis of concepts (calculation and simulation).
• Practical and detailed evaluation of all types of power circuits.
• Enhance and improve circuit performances such as Efficiency and Reliability.
• System design with creation 2D models and design 3D together with ME team.
• Schematic creation and PCB design support.
• As project key person to start from concept to mass production stage.
• Implement design for manufacturing and design for automation. DFx.
• Patent and technology creation, defining new power requirements.

Key Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years’ experience.
• Experience with EV chargers and onboard chargers (OBC) is a plus.
• Familiar with power measurement equipment.
• With solid technical know-how on the transformer, power Mosfet, PWM controller, and synchronous rectifier circuits.
• Understand the application of PID controllers and control loop analysis.
• Knowledge of EMC/IEC/UL/EN standards.
• Experience in schematic and PCB layout designs.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

COMPANY DESCRIPTION

About the Company

JERA Global Markets (JERAGM) is a leading utility-backed seaborne energy trader specialising in LNG, coal and freight. A joint venture between majority shareholder JERA Co., Inc. and EDF Trading, JERAGM's shareholders are among the world's major utilities.

JERAGM operates one of the largest energy portfolios in the world which gives it an in-depth understanding of the way local, regional and international energy markets behave. Its in-depth knowledge and market insights enable us to capture trading opportunities, optimise portfolios, create value and enhance security of supply for our customers.

Headquartered in Singapore, JERAGM has a global talent pool of close to 300 people across offices located in four strategic locations: Singapore, Japan (Tokyo), the UK (London) and the US (Houston).

JERAGM is strongly capitalised with over US$500 million in paid up capital and a total equity of US$4 billion. JERAGM has retained its A+ Stable rating from R&I, attributable to a robust business model and solid financial base.

RESPONSIBILITIES

JERA GM is implementing a series of new IT systems to reduce its reliance on its shareholders for IT services and to enable the rapid growth into a global leader in the trading of fossil fuels.

At the core of the system landscape is a set of vendor systems that support critical business activities such as trading, risk management, pricing, and logistics. JERA GM have and will continue to make significant investments building on top of these systems to tailor them to the specific needs of its business. Up until now, this work has been performed by teams of consultants. JERA GM would like to develop an in-house capability, so they can be self-sufficient in the ongoing development on this platform.

This in-house capability needs to be able to extend, customise, configure and integrate these systems to meet the ongoing needs of the business. They will also support the development of new bespoke systems, such as for business intelligence and decision support, to meet needs not provided by the vendor systems.

The Core Platform Software Engineer will:

• Work to obtain excellent business knowledge of the full transaction cycle within a multi-commodity energy trading environment such that they can converse directly with users and other stakeholders with minimal hand-holding from Business Analysts.

• Develop new features on the company's credit system (Cubelogic) and ETRM (Energy Trading and Risk Management) system to support the company's growth (new products, new processes), in a Python/Azure (Databricks & ADF)/C# / SqlServer environment.

• Demonstrate a broad set of technical skills including expert database development and administration, Python/.NET/C# development and Powershell Automation/Devops skills.

• Build new features on the various applications that revolve around the Cubelogic/ETRM (APIs, loaders, reports, BI). It is most important that they have the ability and desire to rapidly pick up a diverse range of technical skills to support challenges as they arise. They will be actively required to work with challenges using technologies such as Azure IaaS/PaaS, Python, Databricks, Power BI.

• Apply their strong software engineering skills to:
  • Improve the ability to integrate vendor systems together.
  • Improve the ability to unit test customisations of vendor systems.
  • Improve the structure the source of such customisations.

• Work with JERA GM IT to evaluate the quality of the existing vendor system customisations and build out a prioritised backlog of improvements. Work to then safely improve the code estate to improve its flexibility and maintainability.

• Support efforts to improve end-to-end test automation and continuous integration across the application estate.

• Have a strong engineering focus and eye for high quality delivery. They will be expected to deliver high quality software and adhere to modern software engineering practices. They must also be driven to automate everything as this is ingrained in the culture of the team.

• Work within a hybrid internal/consultant/vendor team to deliver a backlog of new features, enhancements, bug fixes and integrations to support the ongoing needs of the LNG and Coal trading businesses. Demonstrate a strong ability to self-organise when required.

• Work collaboratively with the rest of the JERA GM technical team, whilst also demonstrating end-to-end ownership of entire problems where required.

• Show a highly proactive attitude in learning and immersing themselves in the vendor platforms with the aim of gaining an expert knowledge of how to develop and support extensions and integrations.

• Be comfortable with agile delivery modes such as Scrum or Kanban but also be flexible to work with whichever delivery approach works best for the problem at hand.

• Provide 3rd line production support.

Skills and Experience required

• 5-10 years of overall experience with advanced level of coding experience in either Python or C# with good knowledge of other.
• Strong experience in SQL, & PowerShell
• Modern cloud-based system architectures and technologies such as Data Lakehouse using Databricks, Azure functions and ADF
• Experience with C# .NET
  • Good understanding of the core language and framework
  • Service oriented development (WCF, Rest API, GraphQL)
  • Data access development (ADO.NET, EF or equivalent such as NHibernate)
• Extensive SQL Server database design and development skills (excellent SQL skills assumed). A good working knowledge of database performance optimisation is also required.
• Familiar with knowledge of Azure services including VNET, Key-Vaults, Azure Data Factory, ADLS Gen2, Virtual Machines, App Services, Storage Accounts and Azure Active Directory
• Orchestrating data pipelines using Azure Data factory
• Strong conceptual understanding of Big Data, Map-Reduce, Spark, file formats such as Parquet, Avro, ORC etc.
• Reporting tools such as Power BI
• Knowledge of JavaScript/UI framework like Angular/React.
• Cloud experience in Azure or AWS
• Experience with Windows Server infrastructure
• Experience working with agile delivery methodologies such as SCRUM or Kanban.
• Experience with Microsoft-based BI stack, including SSIS, SSRS and Power BI is desirable.
• Experience with Azure PaaS and IaaS and corresponding automation toolkits is desirable.
• Experience in Allegro ETRMs is desirable.
• Experience in Cubelogic is desirable.
• Proven work experience in the energy trading, commodities trading or corporate banking sector

• Highly motivated to continually develop skills and techniques to ensure the best tools are used for the job. Support, resources and technical mentoring will be provided by JERA GM as required.

• Highly motivated to deliver results and ‘go the extra mile' to meet deadlines.

• Able to multi-task with minimal supervision and highly structured and organised in the way tasks are approached.

• Excellent communication skills.

• Strong academic background, educated to degree level and/or equivalent professional qualification or relevant business experience.

Job Purpose

The Assistant Engineer’s job scope shall include leading a team of Technical Officer(s) to perform Preventive Maintenance (PM), Corrective Maintenance (CM), Overhaul (OH) and Engineering Support (ES) on all SMRT Thomson-East Coast Line (STEL) Trains, Depot and Workshop equipment so as to provide a safe, reliable and comfortable journey for our commuters.

Responsibilities

• Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.
• Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.
• Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.
• Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.
• Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.
• Ensure spares, tools and equipment used are in good condition and calibrated if necessary.
• Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.
• Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System
• Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.
• Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.
• Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.
• To support the group during incidents, accidents and emergencies.
• Ensure excellent housekeeping are maintained within all work areas.
• Maintain a high level of work discipline and standards.
• Perform any other task as assigned.

Qualifications & Work Experience

• Diploma in Electrical, Mechanical or Mechatronics Technology/ Engineering from a recognized institution.
• Preferably 5 year’s relevant experience in the railway environment.

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Physically Fit, able to carry at least 10kg machine parts

Work Place : Pasir Ris (2 weeks training @ Woodlands)

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

OT available

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for System Engineers to join their team and contribute to their ongoing success.

Location: Various Project Locations

Working hours: Monday to Friday, Standard Office Hours

Responsibilities:

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities promptly and effectively
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements:

• Min. Diploma in Computer Science, IT Management or related fields
• Fresh graduates keen on building their career in hands-on system engineering are welcome
• Some experience in Windows server OS, Unix/Linux OS & VM environment is a bonus
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good knowledge on VPN, firewall appliances
• Possess working knowledge with Cisco routers/switches would be an advantage

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Responsibilities:

- To review the tender specification requirement & suppliers quotation compliance.

- To work with Project Manager to confirm system design & procurement

- To ensure equipment installation & alignment as per project requirements

- To organize daily works, ensuring work performed on site comply with safety standards and with local authority requirements

- Monitor project progress & conduct site inspection

- To attend to technical meetings to ensure all aspects & requirements were taken care of

- To liaise with relevant parties to ensure efficient & timely delivery of assignment

- To prepare & submit site progress report & all other necessary project documentation

- Attend meetings and conduct site inspection with relevant parties to resolve technical/site issues

- Ensure timely handover of project

- Other project-related tasks as deemed necessary

Requirements:

- Diploma/Degree in relevant industry. Safety certifications an added advantage

- Min. 1-5 years working experience in Fire Protection/Sprinkler system in a construction firm

- Good knowledge of project management principles

- Proficient in communication skills at an operational level

- Able to work independently with minimal supervision

- Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking site workers, subcons/vendors

- Singaporean or Singapore PR preferred

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with thousands of engineers globally supporting projects. They have an international presence worldwide and are looking out for Maintenance Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio

Working hours: Monday to Friday, Standard Office Hours (Occasionally require standby after office hours)

Responsibilities:

• Perform corrective maintenance works for Card Access System, CCTV System, Networks, Windows/Linux Servers and Integrated Security Systems.
• Ensure that deployed system functionalities are in working condition.
• Provide onsite support for integrated security systems
• Perform routine maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements.
• Collate reports and checklist of PM works for billing purpose and CM works report for filing.
• Monitor spare parts availability to support and meet downtime of system.
• Monitor the end-of-life or end-of-service for equipment installed.
• Co-ordinate with sub-contractors and customer on site matters, work schedule and quality of work.
• Support contract administration works (Ordering, billing milestone, O&M submission, Operation Manual submission, maintenance checklist and asset list).
• Assist A&A work / Variation Order work for sites during maintenance cycle

Requirements:

• Min. 2-3 years working experience in maintenance for security systems and servers
• Min. NITEC in Building Maintenance / Engineering fields
• Proficient in troubleshooting for CCTV, Door Access and Alarm systems
• Have performed 24/7 standby work before

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

• Position: Senior Mechanical & Electrical (M&E) Engineer
• Building Contractor - Residential, Commercial & Renovation
• Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm
• Office near City Hall MRT, Singapore
• Basic Salary: $5000 to $6000 + Bonus

Requirements

• At least 3 years relevant experience

Job Scopes

• Generate M&E co-ordination shop drawings.
• Evaluate and resolve M&E problems with consultants and sub-contractors.
• Attend principal meetings with client and consultants.
• Prepare M&E progress report or any other reports required by the client or consultants.
• Collect operational manuals from suppliers / sub-contractors on completion of project for submission.
• Check and ensure compliance with the requirements of ISO 9000, ISO 14001 and OHSAS 18001.
• Collaborate with site engineer to resolve problem and co-chair meeting monthly.
• Propose risk assessments based on tender drawings and documents.
• Develop VCED, including cost-effective solutions for M&E.
• Review M&E work schedules and lead times to create suitable project schedules using Microsoft Project (or equivalent) for tender projects.
• Assist in tendering work by proposing appropriate architectural and C&S solutions, including necessary plinths, access panels, structural openings, dog houses, make-good areas, and other related elements.
• Attend site surveys and ensure proper methods of statement and material shifting are in place.
• Review all VOs on-site and evaluate costs based on POs and tender clarifications.
• Collaborate with the Planning and QS Departments on related matters.
• Prepare Tender presentation slides and present M&E-related items to the client during interviews.
• Full M&E functions as designated and not limits to other general assigned duties.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

• Position: Senior Mechanical & Electrical (M&E) Engineer
• Building Contractor - Residential, Commercial & Renovation
• Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm
• Office near City Hall MRT, Singapore
• Basic Salary: $5000 to $6000 + Bonus

Requirements

• At least 3 years relevant experience

Job Scopes

• Generate M&E co-ordination shop drawings.
• Evaluate and resolve M&E problems with consultants and sub-contractors.
• Attend principal meetings with client and consultants.
• Prepare M&E progress report or any other reports required by the client or consultants.
• Collect operational manuals from suppliers / sub-contractors on completion of project for submission.
• Check and ensure compliance with the requirements of ISO 9000, ISO 14001 and OHSAS 18001.
• Collaborate with site engineer to resolve problem and co-chair meeting monthly.
• Propose risk assessments based on tender drawings and documents.
• Develop VCED, including cost-effective solutions for M&E.
• Review M&E work schedules and lead times to create suitable project schedules using Microsoft Project (or equivalent) for tender projects.
• Assist in tendering work by proposing appropriate architectural and C&S solutions, including necessary plinths, access panels, structural openings, dog houses, make-good areas, and other related elements.
• Attend site surveys and ensure proper methods of statement and material shifting are in place.
• Review all VOs on-site and evaluate costs based on POs and tender clarifications.
• Collaborate with the Planning and QS Departments on related matters.
• Prepare Tender presentation slides and present M&E-related items to the client during interviews.
• Full M&E functions as designated and not limits to other general assigned duties.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Permanent, 5days, Paya Lebar

Our client

MNC in air conditioning and humidification system solution serving high tech industry.

Responsibilities:

· To Conduct assessments of hvac designs to ensure that they meet the required specifications and standards within allotted timeline.

· To verify and prove that hvac systems in data centre build and function according to the requirement.

· To execute, lead n manages the commissioning process across all projects, from start-up, designing, construction, acceptance, functional performance and systems testing to operational turnover.

· Management of 3rd party commissioning agents, supplier, contractor, client to resolve any issues on site

· To perform project closeout and handover

· To produce Commissioning Report for each project.

Requirements:

· Diploma in Mechanical Engineer or related disciplines.

· 5 years’ experience in hvac data centre of commissioning management or hvac data centre design management

· Proficient in data centre safety and industry standards

· 5years’ experience in physical M&E equipment in data centre (especially hvac0

· Speaks and write 2 languages.

For better response, pls apply via job page

https://recruitmentalliance.zohorecruit.com/jobs/Careers

click job opening, click relevant position

We regret that only shortlisted candidates will be notified

• Processing PO to supplier
• Coordination on income and outgoing shipment
• Prepare documents including DO & Invoice & packing list to customer
• Assists in year end stock take.
• Preparation quotation, follow up with customer on every quotation and report.
• Packing, testing and assemble of equipment.
• Proficient in Microsoft Office.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Key Responsibilities:

• Design, develop, and maintain scalable cloud-native applications using .Net Core (C#), Web API, and modern technologies
• Build seamless front-end experiences with Reactjs, Nextjs, and integrate with back-end services
• Develop data access layers using Entity Framework Core and integrate with PostgreSQL and AWS Redshift databases
• Deploy, monitor, and manage applications on cloud platforms (AWS, Azure), utilizing services like Lambda, API Gateway, S3, and CloudWatch
• Develop and maintain containerized applications using AWS EKS or Openshift
• Collaborate with cross-functional teams to design, develop, and ship new features
• Ensure high-performance, quality, and responsiveness of applications
• Maintain code quality through reviews, unit tests, and best practices
• Troubleshoot, debug, and upgrade existing software
• Stay current with emerging technologies to improve efficiency and scalability

Requirements:

• Education: Degree in Computer Science, Information Technology, or related field
• Technical Experience:
  • .Net Core (C#) and Web API
  • Entity Framework Core
  • Nextjs, Reactjs, and Nodejs
  • Database experience (Postgres, AWS Redshift)
  • Cloud-native app development (AWS/Azure preferred)
  • Container platforms (AWS EKS, Openshift)
• Nice to Have: Familiarity with Python

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

Responsibilities :

• Establish Detection to have 100% Inline visibility and Inline control

• Improve Detection strategy, system, and methods to continuously strengthen detection performance.

• Enhance Detection capability and strategy to enable Yield improvement, improve Cycle of Learning and strengthen Defense Line.

• Establish and improve BKM (Best Known Method) related to RAM Detection performance, RAM detection cost and RAM supplier engagement

• Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.

• Set up process parameters for Inspection and Measurement equipment.

• Plan and Evaluate through supplier demo, tool evaluation or H2H (head to head) and Promote new equipment/ material through TOR (Tool of Record) process.

• Implement abnormal analysis and improvement.

• Facilitate and drive global peer groups (HVM and TD) to ensure alignment on strategy and roadmap to achieve area objectives

• Prioritize resources (internally across network and/or externally with Suppliers) to close any gaps.

• Lead Copy Smart Team (CST) and hold the teams accountable to deliver to timelines/commitments. Support cross sites alignment activities through CST and provide strategic direction for the team.

• Set Business Process to handle your area(s) of responsibility to meet the expectations of programs and business processes and adhere to the standards required by those programs and processes.

• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.

• Be part of the team to handle global business for RAM area, including Tool of Records (TOR), Model of Records (MOR), Manufacturing Tool Evaluation Program (MTEP), DOC2, Executive Review Meeting (ERM), Supplier Change Notice (SCM) documentation etc.

• Keep Acceptance Documentation and Configuration Specs (ADCS) updated to current TOR configuration in your area(s) of responsibility.

• Handle projects with proper Project Management process with metric to track project success.

• Initiate, develop, drive and support strategies that not only benefit one site, but Micron network as a whole.

• Identify and share Best Known Method (BKM) across sites and track compliance to agreed upon alignment to BKMs.

• Track Fab performance metrics for benchmarking purposes. Identify gaps and area of improvements for Fabs.

• Partner with Technology Development and Global Procurement to drive suppliers' competitiveness in RDA and Metrology area to reduce CapEx and OpEx.

• Provide tactical support and coordination for the Fabs as required for issues of People, Safety, Time to Mature cummulative Yield, Quality, Cost, and Cycle Time.

• Engage and drive suppliers on Tool roadmap (MRM), Technology sharing, and other projects

Requirements :

• Masters/Bachelors in Engineering

• Relevant working experiences in RDA and/or Metrology

• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals. Work with suppliers to address issues of spares delivery, quality, performance and change management.

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management, and Purchasing.

• Promote worldwide sharing and transfer of area-specific domain knowledge

Working Location : 1, North Coast Drive, Singapore 757432

Key Responsibilities:

• Conduct site acceptance tests, oversee commissioning processes, and assist with the start-up of Insulating Glass machinery.
• Interface with customers for after-sales service, identify their needs, and provide tailored solutions.
• Address and resolve on-site maintenance issues by troubleshooting and offering technical support.
• Work collaboratively with customers to fulfill repair schedules effectively.
• Deliver training sessions to help customers optimize product performance.
• Provide feedback from the field to engineering and production teams for product improvements or new designs.
• Ensure compliance with validation processes, including product applications, controls, and documentation.

Requirements:

• Must be very willing to travel as there are times the travelling can take up to 8 weeks.
• Physical ability to handle heavy machinery parts and tool kits (>30kg).
• Ability to read and interpret technical drawings.
• Prior working experience in a technical servicing role is a must.
• Hands-on experience in servicing and the ability to work independently at job sites.
• Willingness to travel for service assignments within the SEA region.
• Strong problem-solving skills and a customer-focused mindset.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Description

• Oversee ICA (Instrumentation, Control and Automation) related design for process plant (water/wastewater plant, incineration plant, etc.), from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimize the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Review project specifications, technical proposal/design documentations from the ICA subcontractor/supplier and liaise with project consultant / client for the approval of technical documentations/drawings.
• Support ICA related procurement work, develop cost estimates for ICA products and ICA works, and prepare the schedule for ICA works.
• Oversee project coordination, ensuring project is on schedule and is running smoothly, including handling technical matters at site, managing ICA subcontractor/supplier and working on site with clients and other stakeholders.
• Supervise installation and testing and commissioning of ICA works.
• Perform other duties as assigned by the management.

Requirements

• Minimum 4 years of experience in process plant electrical EPC work with Degree in Electrical , Electronic or Instrumentation Engineering or related Engineering Discipline. For Diploma holder, minimum 6 years of experience is required. For senior position, candidate must have at least 8 years of experience.
• Familiar with relevant code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D/Bentley is preferred.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• In-depth knowledge of control system architectures, such as PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater or incineration related control system.
• Relevant experience in ICA design and site work for water, wastewater treatment and incineration works.
• Able to work in Tuas area.

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Location: Tuas Link
Working hours: Mon to Fri, 8am to 5pm
Salary: Up to $4,000

Job scope:
• Oversee the maintenance of the building, facilities and security of the site.
• Coordinate and perform inspections, testing, routine maintenance and repairs on all site equipment (such as electricity, fuel & water supply, HVAC, security and fire safety systems).
• Provide updates to the Facility Manager regarding issues to be addressed, ensuring that critical systems are fully operational.
• Liaise and supervise contractors on-site during maintenance and repair activities.

Requirements:
• Min. Diploma in facilities management or any relevant engineering discipline
• Singaporean or PR only

Please email your updated resume with your last drawn salary, notice period and expected remuneration to [email protected] to apply.

Sylvie Yong (R1769137)
The HR Ecology Pte Ltd (13C6391)