This position is responsible for the efficient operation, maintenance and repair of the physical structure, utility services, equipment, fixtures, and furnishings of the hotel facilities.

• Work with supervisor or technicians to carry out planned preventive maintenance, corrective maintenance and repairs as per instructed by Engineer
• Responsible of all technicians under Duty Engineer care
• Carry out planned and unplanned maintenance programs for the various systems such as (not limited to) the following:
• Air-conditioning & electrical, refrigeration, FLS equipment, building maintenance including furniture & fixtures, parts renewal & repairs, kitchen equipment, low voltage (LV), guest rooms, F&B outlets, front/back of the house, plumbing & drainage.
• Comply with established safety practices while performing repair or retrofit of all electrical, mechanical, plumbing, HVAC, water treatment, etc. Operate, maintain and repairs all hotel systems, devices, controls, equipment, etc.
• Comply with all established procedures, e.g. Work Orders, Out-of-Order Rooms, Emergencies, etc.
• Carry out preventive maintenance, repair or retrofit of electrical, mechanical plumbing, fire protection, and life safety systems.
• Records and analyses daily operating logs and utilities.
• Handles emergencies in repair works.
• Carry out improvement, maintenance and repair work on all building services and equipment according to the standards and requirements.
• Perform daily startup, shutdown and inspection of building services and equipment according to the standards and requirements.
• Maintain tools and equipment, and perform Engineering housekeeping work.
• Be fully familiar of the Emergency Procedures, Policies and Standard Operating Procedures as established by the Hotel.
• Attend all briefings, meetings and trainings as assigned by management.
• Perform other duties as directed by the management.
• Ability to prioritize tasks and follow specified procedures
• Ability to work well with minimal supervision
• Resolve problem without waiting for ‘Spoon feeding’ idea.
• Good physical condition, strength and well
• Enforce and check general housekeeping and tidiness of workplace and workspace
• Respond quickly in the event of an emergency, notify appropriate personnel and follow safety protocol
• Basic understanding of mechanical and electrical system
• Ability to conduct basic troubleshoot, test, repair and service equipment
• Fast, efficient and accurate when escalating problem up to Engineers
• Willingness to work overtime if necessary
• Able to make judgement and decision when Engineer is not around
• Assist Engineer to follow up outstanding issue passed down

Qualifications / Experience

• Trade Certificate or a minimum of 2 year of relevant hands-on experience in area of expertise
• Reading, writing and oral proficiency in English language
• Good communication and customer contact skills
• Service oriented with an eye for details
• Ability to work effectively and contribute in a team
• Self-motivated and energetic
• Able to lead the team in absence of supervisor
• Required to come down on site is urgent issue arise
• Control of technician’s OT and work roster
• Required simple computer knowledge etc, word and excel

About the Company

Our Client is an information technology service provider offering consulting, systems integration, maintenance and managed services to enterprise customers

Responsibilities

We are looking for a Network Engineer to design, deploy and maintain network infrastructure and solutions for clients in various industries.

• Design and implement secure networking solutions;
• Install, configure, and manage network devices;
• Troubleshoot escalated network issues and work towards effective resolution;
• Maintain detailed technical documentation for all network-related configurations and procedures;
• Monitor and enhance network performance, ensuring high levels of availability and stability;
• Drive improvements in scalability, capacity, security, and overall system efficiency;
• Support project deployment, ensuring successful implementation of network solutions.

Requirements

• Tertiary education in information technology or any relevant discipline;
• Certification in networking technologies would be an advantage;
• At least 3 years of experience in network infrastructure, ideally within a systems integration environment;
• Strong knowledge of wired and wireless network deployment and related technologies;
• Familiarity with routing and switching protocols and practices;
• Excellent organizational skills and the ability to prioritize tasks effectively.

Employment Details

• This is a 1-year renewable contract, convertible to permanent.

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

Role Description

This is a full-time on-site role for a SOC L1 Analyst located in Singapore.

Responsibilities:

• Monitoring and analyzing security events, identifying potential threats, conducting investigations, and responding to security incidents
• Work closely with the end client SOC team to ensure the timely and effective detection, containment, and mitigation of security incidents
• Support security developments (such as evolving threats, new or enhanced security controls or changes to the technical infrastructure).
• Ensure that all Infrastructure related procedures, operation guide, architecture diagram, hardening baselines, security metrics, etc documents shall be reviewed annually or updated whenever there are changes within a month.
• Be responsible for strengthening Customer’s cyber security posture against cyber threats through vulnerability management, incident response and analysis, threat hunting and security operations.
• Manage Customer’s Cyber security operation and manage the reporting and handling of cyber security incidents.
• Perform Vulnerability Management leveraging on MVMS.
• Perform daily checks on the Endpoint Detection Response/Database Activity Monitoring dashboard for any abnormalities.
• On boarding of subscribed servers and infrastructure devices to MVMS.
• Provide supporting documents for audits.
• Perform Monthly Vulnerability Assessment, Quarterly Vulnerability Assessment for servers and network equipment.
• Work with application and infrastructure team to ensure compliance and regulatory requirements and industry standards.

Requirements:

• Diploma/degree in computer studies
• 2 years of experience working in a security operation, incident response, vulnerability management or related field.
• Demonstrated experience in network security, server security, endpoint security, web security etc.
• Strong knowledge of security principles, technologies, and industry best practices.
• Experience with log analysis, malware analysis, and network traffic analysis.
• Excellent analytical and problem-solving skills, with the ability to quickly identify and respond to security incidents, analyze complex security issues and develop effective solutions.
• Hands-on experience in security appliances such as IBM Guardium, MMVS, Carbon Black, Cyber Ark is a definite advantage.
• Experience in IT security/support operations with willingness to learn above mentioned tools are encouraged to apply. Experienced candidates will be considered for team lead role.
• Independent and capable of working in a high-pressure environment.
• Willing to work in rotational shift environment (including weekends and night shift).

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

JOB OVERVIEW:

Join our team at the exciting new golf driving range in Upper Jurong (Joo Koon), Singapore! We’re looking for a proactive Operations Assistant to help ensure smooth day-to-day operations at our state-of-the-art facility. From managing equipment to assisting guests, you'll play a key role in delivering an exceptional golfing experience. This is a great opportunity for someone who’s passionate about sports, customer service, and making sure everything runs like clockwork. If you're ready to be part of a dynamic team and contribute to the success of our growing facility, we want to hear from you!

CORE RESPONSIBILITIES:

• Assist in ensuring the smooth operation of the golf driving range, from equipment maintenance to cleanliness and service standards.
• Provide excellent customer service by addressing guest needs and maintaining a welcoming atmosphere.
• Support the operations team in managing daily tasks, including overseeing staff and assisting with scheduling.
• Monitor and maintain equipment, including simulators and tracking systems, ensuring they’re always in top working condition.
• Help enforce health and safety standards, ensuring compliance with operational guidelines and licensing requirements.
• Assist in organizing and executing fun member events, promotions, and corporate activities that attract and engage guests.

JOB SPECIFICATIONS:

• Diploma or higher qualification in Sports Management, Business, or a related field.
• 0-2 years of experience in operations or customer service, ideally in a golf or leisure environment.
• Familiarity with golf driving ranges and equipment (such as simulators and ball tracking systems) is a plus.
• Strong communication and team collaboration skills.
• Excellent attention to detail and a proactive attitude.
• A genuine passion for golf and creating great experiences for guests.

(2 years contract renewable)

• 5 days, 8.30am- 5.50pm
• Location: East, and client's site whenever required

1. Associate System Engineer

• Salary: S$ 2,800 ~ 3,000 + allowance

2. System Engineer

• S$ 3,500 + Allowance

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

• Well Established Company
• Basic $4000 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working days: Monday to Friday
• Working hours: 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turnkey manager to plan and execute plant shutdown
• Other ad-hoc duties as assigned

Requirements:

• Degree in Chemistry or Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)
EA Recruitment Pte Ltd
EA License No: 21C0492

Secretlab is an international gaming chair brand seating over 3 million users worldwide, with our key markets in the United States, Europe and Singapore, where we are headquartered.

We’re seeking an enthusiastic and driven Retail and Events Operations Associate to join our expanding Brand Experience team. As a key member of this dynamic team, you’ll play an essential role in delivering exceptional customer experiences, both on the ground and behind the scenes. This is a unique opportunity to be involved in both retail and event operations, directly contributing to the growth and impact of our brand.

The Brand Experience team operates with an entrepreneurial and collegial spirit- we pride ourselves on going the extra mile to create memorable moments for our customers. As a Retail and Events Operations Associate, you will play a crucial role in balancing sales targets with delivering an outstanding Secretlab experience.

In this role, you’ll engage with customers, promote and sell our products, and help ensure that our retail operations and onsite events run seamlessly. You will assist in managing retail logistics, overseeing inventory, and executing display plans for new product launches in our showroom.

Responsibilities

• Sales and Customer Engagement: Promote and sell Secretlab products in the showroom and during onsite events, while meeting individual sales targets and driving customer satisfaction through Google Reviews and direct interactions.
• Store Operations and Reporting: Execute daily showroom opening and closing procedures, manage settlement duties, and assist in preparing monthly performance reports, tracking metrics such as AOV, UPT, and conversions.
• Inventory and Showroom Management: Ensure showroom organization, manage inventory tracking, and support display plans for new product launches.
• Aftersales Support: Handle customer returns, cancellations, and delivery arrangements, ensuring excellent after-sales service and follow-up.
• Project Support and Activation: Assist with offline activations, brand experience projects, and manage showroom bookings/appointments to ensure smooth operations.
• Team Support and Continuous Improvement: Provide support to the Brand Experience team in daily improvement plans and assist with any additional responsibilities required for retail and event operations.

Requirements

• 2-3 years of experience in retail or sales, preferably in a high-end consumer product
• Proficiency in MS Office, including Excel and Powerpoint
• Proven ability to build and enhance customer experiences by engaging with customers, understanding their needs, and creating memorable interactions that align with the brand's values.
• Experience managing inventory, sales reports, and retail logistics.
• Strong knowledge of promotion mechanics, discount strategies, upselling, and cross-selling techniques.
• Strong communication and interpersonal skills.
• Strong ability to handle customer inquiries, concerns, and after-sales service issues with professionalism.
• Works effectively within a team to deliver cohesive and outstanding customer experiences across all touchpoints.
• Comfortable in a fast-paced retail environment with changing priorities and responsibilities.

Bonuses

• A proven track record of exceeding sales targets or driving revenue growth in a retail or sales environment.
• Event Management Experience: Previous experience in organizing or managing events, particularly in a retail, brand activation, or promotional context.
• Any prior experience in leading or mentoring teams, even in a small capacity, showing initiative and responsibility

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Key Roles and Responsibilities

• Prepare generating unit activities to come on stream in accordance with real time dispatch schedule.
• Respond appropriately to system defects, and rectify problems as required.
• Carry out all Plant operating activities, including isolation, in line with operational guidelines.
• Carry out all routine Plant tests and periodic auxiliary equipment changeover in accordance with approved procedures and schedules.
• Schedule, act and document authorities for maintenance work as required.
• Identify and report defective plant and equipment.
• Maintain accurate, up-to-date and timely records of all key operational activities.
• Closely monitoring the operational parameters in the DCS, carryout routine checklist, routine test and suggestion for improvements.
• Take up the role of Authorized Person (AP) as per the PTW procedure.
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

Major Challenges

• Start-up/Shut down Gas turbine and steam turbine as per start-up/shut down schedule.
• Act in emergency to avoid undue trips to process steam export and meet the load schedule without any non-conformance.
• Investigate plant abnormalities, and take corrective course of action during shift (plant trips, unit de-ration, occurrence of fire etc.)

Key Decisions & Dimensions

• Carry out first-level maintenance as required.
• Carry out routine GT fuel changeover and equipment changeover without affecting the plant operation.
• Assist shift engineer in analyzing the problem encountered and find solution/procedure/practices to avoid the repetition.
• Monitor performance and maintain optimum unit efficient during operations.

Qualifications & Experience

• Minimum NITEC with relevant technical qualification
• Preferably two years of relevant experience

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Working days: Monday - Friday

Working hours: 9am-630pm (need to do OT to complete task on certain time)

Location: Jurong East

1. Operational Responsibilities:

• Coordinate daily HR operations, including scheduling, attendance, and employee records management.
• Support payroll processing by ensuring accurate attendance and leave records.
• Handle employee inquiries and provide timely resolutions to HR-related concerns.
• Oversee onboarding and offboarding processes, including preparing documentation and conducting orientation sessions.

2. Project Assistance:

• Collaborate with project managers to understand project requirements and timelines.
• Assist in sourcing and recruiting candidates for project-specific roles.
• Monitor and track the deployment of staff for various projects to ensure smooth operations.
• Prepare project-related reports, such as workforce allocation and budget tracking.
• Act as a liaison between the HR department and project teams to resolve staffing and administrative issues.

3. Communication and Coordination:

• Serve as the point of contact between HR, operations, and project teams.
• Coordinate with external stakeholders, such as vendors and agencies, for project-related hiring or operational needs.
• Maintain open communication with employees and management to ensure alignment with organizational goals.

4. Administrative Support:

• Maintain accurate and organized documentation for operations and projects.
• Schedule and organize meetings, training sessions, and other HR activities.
• Assist in compliance and audit preparations related to operational and project activities.

Requirements:

• Holds a Diploma or higher qualification.
• A team player with strong time management skills to complete tasks efficiently.
• Open to Singaporean candidates only.

Kindly email your CV to [email protected]. If you do not possess the above experiences, your application will still be considered on individual merits and you may be contacted for other job opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified. **

Ong Jun Kiat

Registration Number: R23117387

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Key Responsibilities:

1. Middleware Design & Implementation:Design and deploy middleware solutions to support enterprise application integration.
   Install, configure, and manage middleware technologies, such as WebLogic, WebSphere, Apache Kafka, or Oracle Fusion Middleware.
   
2. Integration & Automation:Develop and implement integration solutions using APIs, messaging, or event-driven architecture.
   Automate middleware deployment, monitoring, and maintenance using scripting or orchestration tools.
   
3. Monitoring & Troubleshooting:Monitor middleware performance and ensure high availability and reliability.
   Diagnose and resolve middleware-related issues in a timely manner.
   Conduct root cause analysis and implement preventive measures.
   
4. Security & Compliance:Ensure middleware solutions are secure and compliant with organizational policies and standards.
   Apply patches, updates, and security configurations to middleware components.
   
5. Collaboration & Support:Work closely with application developers, system administrators, and DevOps teams to align middleware solutions with business needs.
   Provide technical support and training for middleware technologies.
   
6. Documentation:Maintain accurate and comprehensive documentation for middleware configurations, processes, and standards.
   

Required Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Proven experience as a Middleware Engineer or in a similar role.
• Hands-on experience with middleware technologies (e.g., IBM WebSphere, Apache Kafka, Oracle WebLogic, or similar).
• Strong knowledge of enterprise integration patterns, API management, and service-oriented architecture (SOA).
• Proficiency in scripting languages (e.g., Python, Bash, or PowerShell).
• Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) and containerization technologies (e.g., Docker, Kubernetes).
• Excellent troubleshooting and problem-solving skills.

Preferred Qualifications:

• Certifications in relevant middleware or cloud platforms (e.g., AWS Certified Solutions Architect, Oracle Middleware Certification).
• Experience with CI/CD tools (e.g., Jenkins, GitLab CI/CD).
• Knowledge of database systems and SQL.

We are seeking a highly skilled and detail-oriented Electrical Engineer to join our team, with expertise in electrical panel design, fabrication and knowledge of PLC and HMI. The ideal candidate will have a strong technical background and hands-on experience in manufacturing processes.

Key Responsibilities:

• Electrical Panel Design & Fabrication:
  • Design and layout electrical control panels, ensuring compliance with industry standards, client requirements, and operational needs.
  • Specify and select appropriate components such as PLCs, protection relays, circuit breakers, and other devices based on technical and functional requirements.
  • Oversee panel fabrication processes, including material selection, wiring, and assembly, to ensure adherence to design specifications and quality standards.
• Schematic Drawings & Documentation:
  • Develop and produce detailed electrical schematics, wiring diagrams, and single-line diagrams using CAD tools (e.g., AutoCAD Electrical).
  • Create comprehensive Bill of Materials (BOMs) and maintain accurate project documentation.
• PLC Programming & Integration:
  • Program, configure, and integrate PLC systems to support panel functionality.
  • Design control logic and troubleshoot issues during system testing and commissioning.
• Project Management & Collaboration:
  • Work closely with project managers, mechanical engineers, and production teams to meet deadlines and quality expectations.
  • Provide technical support during the installation and commissioning of electrical panels.
• Compliance & Standards:
  • Ensure designs and fabricated panels comply with relevant electrical codes, standards, and safety regulations (e.g., IEC, NEC, UL).
  • Conduct regular reviews to ensure compliance with updates in industry standards and practices.

Qualifications:

• Bachelor’s degree in Electrical Engineering or a related field.
• Extensive experience in electrical panel design, schematic drawings, and panel fabrication.
• Hands-on knowledge of PLC programming, configuration, and integration.
• Skilled in using CAD software (e.g., AutoCAD Electrical, EPLAN, SolidWorks Electrical).

Strong understanding of electrical systems, components, and industry standards.

Responsibilities:

• Maintain Troubleshoot, repair, services & maintain.
• Perform on-site and in-house Conyrol and services / repair.
• Complying with service standards, work instructions and customers' requirements.
• Servicing works (maintenance service, chemical treatment, overhaul treatment and etc.)
• Carry out preventive and breakdown maintenance.
• Trouble shoot and resolve technical issues.
• Testing and commissioning of the equipment.
• Report all problems identified during preventive maintenance and carry out repair works.
• Ensure drain pipe is free of dust/dirt and draining properly.
• Performing jobs promptly and efficiently.
• Lead the team of technicians to carry out work efficiently.
• Send workers from Place of Stay to various work sites and vice versa.
• Purchase, collection and delivery of materials/goods from supplier or vendor to sites.
• Perform loading and unloading of goods/materials.
• Ensure timely delivery of goods/materials to sites.
• Perform basic maintenance / upkeeping of vehicle.
• Any other duties as assigned.

Requirements:

• Preferably at least 4 years of relevant supervisory and hands-on experiences in maintenance, troubleshooting and systems.
• Must be independent and must be able to lead the team of technicians.
• Able to work under pressure and in a fast-paced environment.
• Physical work required and be able to work long hours.
• Class 3 with forlift licence.
• Diploma/Degree education on field.
• All races welcome.

Summary

Responsible for designing and implementing test hardware and software to validate product functionality, performance, and reliability. Strong problem-solving, organizational, and communication skills are crucial for success in this role.

Responsibilities

• Design, develop, and implement test hardware and software for validating product functionality, performance, and reliability.
• Create automated test systems and procedures to ensure consistent and repeatable test results.
• Develop, troubleshoot, and maintain test fixtures, equipment, and associated software for in-house and production testing.
• Collaborate with design and manufacturing teams to identify and address test-related issues.
• Analyze test data to identify trends, troubleshoot issues, and recommend improvements to product design or test processes.
• Document test plans, procedures, results, and maintenance requirements.
• Ensure test systems comply with industry standards and safety regulations.
• Continuously improve test processes and tools to reduce testing time and increase reliability.

Requirements

• Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field from a recognized institution.
• Minimum of 5 years of experience in developing test hardware and software, preferably for complex electromechanical systems.
• Strong proficiency in programming languages such as Python, LabVIEW, MATLAB, or C/C++.
• Knowledge of hardware design and schematic interpretation to develop custom test fixtures.
• Experience with data acquisition systems, signal processing, and instrumentation.
• Familiarity with communication protocols (e.g., I2C, SPI, UART, Ethernet) and interfaces (e.g., GPIB, USB).
• Ability to integrate sensors, actuators, and control systems into test setups.
• Experience in using software tools for simulation, debugging, and automation.
• Ability to analyze complex technical problems and develop innovative solutions.
• Strong troubleshooting skills for both hardware and software in testing environments.

Main Duties:

• Oversee the construction activities and progress, plan, implement and monitor work
• Schedule in accordance to the master and detailed work program
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle of technical and engineering problems
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Supervise ongoing site activities closely

Summary

Responsible for designing, developing, and maintaining automated systems to enhance production efficiency and accuracy. Strong analytical and problem-solving skills are essential.

Responsibilities

• Design, develop, and implement automated systems to improve production efficiency and accuracy.
• Work closely with cross-functional teams to identify automation opportunities in manufacturing and assembly processes.
• Program and maintain PLCs, robots, and other automated equipment.
• Develop user-friendly interfaces and dashboards for monitoring and controlling automated systems.
• Conduct troubleshooting, debugging, and performance tuning for automated equipment.
• Stay updated on advancements in automation technology to recommend and implement innovative solutions.

Requirements

• Recognized degree in Mechanical Engineering, Electrical Engineering, or Automation Engineering.
• At least 5 years of experience in industrial automation, including hands-on experience with PLCs, robotics, and sensors.
• Proficiency in programming languages such as Python, C++, or ladder logic for PLCs.
• Knowledge of Industry 4.0 principles and IoT integration.
• Strong analytical and problem-solving skills.

We are seeking a skilled and motivated Middleware Engineer to design, implement, and maintain middleware solutions that enable seamless integration between applications, services, and systems. The ideal candidate will have a deep understanding of middleware technologies, system architectures, and enterprise integration patterns. You will collaborate with cross-functional teams to ensure the performance, reliability, and scalability of middleware platforms.

Key Responsibilities:

1. Middleware Design & Implementation:Design and deploy middleware solutions to support enterprise application integration.
   Install, configure, and manage middleware technologies, such as WebLogic, WebSphere, Apache Kafka, or Oracle Fusion Middleware.
   
2. Integration & Automation:Develop and implement integration solutions using APIs, messaging, or event-driven architecture.
   Automate middleware deployment, monitoring, and maintenance using scripting or orchestration tools.
   
3. Monitoring & Troubleshooting:Monitor middleware performance and ensure high availability and reliability.
   Diagnose and resolve middleware-related issues in a timely manner.
   Conduct root cause analysis and implement preventive measures.
   
4. Security & Compliance:Ensure middleware solutions are secure and compliant with organizational policies and standards.
   Apply patches, updates, and security configurations to middleware components.
   
5. Collaboration & Support:Work closely with application developers, system administrators, and DevOps teams to align middleware solutions with business needs.
   Provide technical support and training for middleware technologies.
   
6. Documentation:Maintain accurate and comprehensive documentation for middleware configurations, processes, and standards.
   

Required Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Proven experience as a Middleware Engineer or in a similar role.
• Hands-on experience with middleware technologies (e.g., IBM WebSphere, Apache Kafka, Oracle WebLogic, or similar).
• Strong knowledge of enterprise integration patterns, API management, and service-oriented architecture (SOA).
• Proficiency in scripting languages (e.g., Python, Bash, or PowerShell).
• Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) and containerization technologies (e.g., Docker, Kubernetes).
• Excellent troubleshooting and problem-solving skills.

Preferred Qualifications:

• Certifications in relevant middleware or cloud platforms (e.g., AWS Certified Solutions Architect, Oracle Middleware Certification).
• Experience with CI/CD tools (e.g., Jenkins, GitLab CI/CD).
• Knowledge of database systems and SQL.

Key Competencies:

• Strong communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• High attention to detail and commitment to delivering quality solutions.

1. JOB DESCRIPTION

Job Title

Sales Engineer

Occupation

Sales & Marketing Engineer

Job Description & Requirements

Job Description:

We are seeking a highly motivated and skilled Mechanical Sales Engineer to join our team. As a Mechanical Sales Engineer, you will be responsible for driving sales and promoting our mechanical products and solutions to customers in Singapore. Your primary focus will be on developing new business opportunities, managing customer relationships, and achieving sales targets.

Responsibilities:

1. Develop and implement effective sales strategies to promote mechanical products and solutions.
2. Identify and target potential customers, including conducting market analysis and research.
3. Build and maintain strong relationships with existing and new customers, ensuring customer satisfaction.
4. Collaborate with the engineering team to provide technical support and product knowledge to customers.
5. Prepare and deliver professional sales presentations and demonstrations to potential clients.
6. Negotiate and close sales deals, ensuring profitable business growth.
7. Monitor market trends and competitor activities to identify new business opportunities.
8. Collaborate with the business development team to develop and execute sales plans.
9. Provide regular sales reports and updates to management.

Requirements:

1. Diploma in Mechanical Engineering or related field.
2. Proven experience in technical sales, preferably in the mechanical industry.
3. Strong customer relationship management (CRM) skills.
4. Excellent negotiation and communication skills.
5. Ability to analyze market trends and identify business opportunities.
6. Knowledge of mechanical engineering principles and products.
7. Demonstrated ability to achieve sales targets and drive business growth.
8. Proficient in presentation skills and delivering persuasive sales pitches.
9. Self-motivated and able to work independently as well as in a team.
10. Singaporean citizenship or valid work permit.

If you are a dynamic and ambitious individual with a passion for sales and mechanical engineering, we invite you to apply for this exciting opportunity. Please submit your resume, along with a cover letter highlighting your relevant experience and achievements.

Oversight day to day site progress on mechanical and electrical installations in fire protection system

Materials take off for mechanical and electrical installation in fire protection system and place order to managament

Coordination between multiple trade on site installation

Liaise with main contractor for project scheduling

Update shop drawing in cad file for as built creation and update main contractor

Represent company on site progress meeting

Respond emergency calls from maintenance sites and activate manpower

Responsibilities:

• Agree to detailed programmes of work - time chart and representation on site plans
• Check that all necessary drawings and instructions have been given to contractors and authorisations obtained, in accordance with the agreed programme
• Check that materials are ordered in good time and permits OK.
• Check that all construction work is carried out in a safe manner, and that the site is kept secure
• See that requirements of specifications in regard to materials and workmanship are complied with by contractors. This includes sample tests of material and workmanship.
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect for issuance of Architect's Instruction or Architect's clarification.

Requirements:

• At least 4 to 6 years or more relevant experience
• A recognised university degree in Civil Engineering

Job Description:

• Liaise with sub-contractors on day-to-day site operations.
• Proactively manage any changes in project scope.
• Identify and resolve any site issues with other trades.
• Ensure the project meets clients' quality standards.
• Able to interact with all levels of stakeholders.
• Attend regular consultant meeting

Job Requirements:

• Recognized Washington Accord Univeristy of Degree in Civil Engineering.
• Min 5 years of local working experience.
• Good computer literacy.
• Self-motivated and able to work independently.

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

• 
  
• To be involved in the planning and designing of civil and structural engineering works
• To prepare the design and technical specifications for tenders; as well as tender documents for the bidding of civil and structural engineering projects
• To supervise in the civil and structural works
• To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients
• Any ad-hoc duties as per assigned

1) At least two years working experience

2) Able to use engineering software Staad pro, SAFE, Plaxis

3) Able to work independently under the guidance of senior / principle engineer