The Assistant Chief Engineer is responsible to assist the Chief Engineer in the operation and maintenance of the building, to ensure a high standard of upkeep and maintenance, to the satisfaction of the building owner and guests / tenants.

Responsibilities:

• To assist the Chief Engineer to implement the execution of preventive maintenance and repair schedules of all machinery, equipment and facilities and see to the proper execution by employee staff or external agencies or contractors.
• To assist the Chief Engineer to prepare the duty roster of maintenance staff.
• To conduct daily briefing of staff and assign duties to staff to carry out the necessary building operation and engineering works.
• To assist the Chief Engineer in the execution of administrative duties such as inventory management, record keeping of engineering work / repair, etc.
• To assist the Chief Engineer to ensure good housekeeping standard of the engineering workshop and that all safety procedures and rules are adhered to.
• To assist the Chief Engineer to obtain quotations for all the necessary works by external agencies / contractors and for all necessary purchases from suppliers.
• To contribute towards cost management of the department and ensure that there are no wastage, negligence or dishonesty.
• To assist Chief Engineer in profits and losses costing and planning.
• To ensure that the staff in the department provides a high standard of engineering services which meets the expectations of the building owner / tenants / guests / shoppers
• In conjunction with the Chief Engineer, to ensure that that the maintenance staffs are adequately deployed and that they are properly trained to discharge their roles.
• Mentor, coach & orientate new as well as existing staff in their roles & responsibilities towards the department goals
• In conjunction with the Chief Engineer, to assist the maintenance staff retention and to take appropriate measure in furtherance of staff stability.
• To ensure that effective fire safety, work place safety practices and enforcement of local Health & Safety regulations are met.
• Ensure to assist department to comply all authorities' requirement
• To ensure that Hotel management is satisfied with the quality of services rendered by the Engineering department.
• To ensure that the Hotels guests receive an adequate level of engineering services that satisfies their concerns and needs.

Job Requirements:

• Candidate must possess a Polytechnic Diploma in Electrical, Mechanical or Building Services or equivalent. Preferably with Engineering Degree.
• Preferably with minimum 3 years or more of experience in Engineering management in similar capacity
• Able to deal with suppliers / contractors / government bodies
• Able to manage various projects at any point of time.
• Exposure to purchasing, cost control beneficial
• Able to use Microsoft Word, Excel of computer for preparing reports
• Sound Knowledge of Hotel Engineering and Management
• Sound knowledge in Mechanical / Electrical / Building Engineering
• Possess skills in maintaining, troubleshooting and repairing of building equipment
• Good communication skills (verbal and written), able to resolve any conflicts.
• Good coaching skill, ability to lead the junior maintenance staff.
• Willingness to learn and work as a team member
• Possess high level of integrity and respect for others
• Able to withstand huge pressure and stress towards work
• Outgoing personality
• Responsible to his work, hardworking, good initiative with cost saving in mind
• Self-confident, self esteem
• Good problem solving skills necessary
• Able to put in long hours when required and 24 hours standby for any technical problem occurring
• No criminal record
• No external commitment that clash with work

Job Description

• Day-to-day supervision on site
• Coordination and monitoring of progress amongst various subcontracting works
• Proficiency in CAD software, checking drawing discrepancies, coordinating with client’s representatives, consultants and sub-contractors on technical matters
• Attend meetings, inspections, liaison with QP's, government body and clients
• Responsible for the upkeep / submission of reports including safety and other compliance matters

Job requirement

• Prior experience with landed property construction in Singapore
• Experienced with Structural and architectural works for Building Construction
• Degree in Civil Engineering with relevant safety and construction certificate
• Kindly include project type in your resume

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

This role is required to managed and support 1-Net's IT Services business, including Cloud Services, Managed Services, DC services, and Business Continuity Management Services.

Responsibilities

• Providing 2nd/3rd level support to Network Services
• Problem resolution in customer network issues
• Plan, implement, review and project manage network infrastructure projects and operations
• Test, evaluate and recommend new networking products for customers
• Review and continuously enhance existing network services
• Improve network performance; optimize network usage and bandwidth usage and secure the core network
• Optimize routing policies and capacity management to ensure minimal network latencies and outages
• Secure network with relevant security policies
• Responsive to solve network issues, on standby 24x7
• Assist L1/L2 Engineers to handle customers' issues directly
• Recommend suitable and relevant solutions to solve customers' issues
• Provide maintenance support for all network infrastructure
• Provide monthly network infrastructure performance review report and capacity planning recommendations
• Ensure efficiency and effectiveness of the implemented solutions in meeting user's requirements and work processes and procedures.
• Ensure timeliness & quality of project delivery.
• Structured cabling system implementation and cross connect provisioning.

• In depth practical experience in LAN/WAN implementation which include router & switches setup and configuration.
• Knowledge and experience with networking protocols, including BGP, VXLAN EVPN, OSPF, IOX-XR, NX-OS
• Structured Network Infrastructure for Layer 2 & 3 support.
• Certification in CCNA, CCNP is highly preferred
• Shift work required

We are seeking highly skilled Commissioning, Qualification, and Validation (CQV) Engineers to provide risk-based CQV services for pharmaceutical and biopharmaceutical clients. This role offers opportunities to work across various areas, including process equipment, CIP/SIP (Clean-In-Place/Sterilize-In-Place), and process manufacturing systems, with a focus on maintaining compliance with regulatory standards.

Key Focus Areas:

1. CQV for Facilities, HVAC, and Equipment
2. CQV for Cleaning Validation

Responsibilities:

• Develop risk assessments, system impact assessments, protocols, and reports to support qualification and validation requirements, in line with regulatory standards and industry best practices.
• Create validation protocols using a science and risk-based approach to ensure compliance with regulatory requirements.
• Review, analyze, interpret, and summarize system and process performance data from executed activities for reporting and presentations to management.
• Investigate deviations, prepare detailed investigation reports, and create summary reports to ensure clear documentation of issues and their resolutions.
• Apply good judgment within defined practices and policies to select appropriate methods and techniques for obtaining solutions.
• Author or support the creation of test scripts for commissioning and qualification (CQ) of facilities, HVAC systems, manufacturing or analytical equipment.
• Conduct cleaning validation studies to ensure processes meet stringent regulatory requirements.
• Author or execute test scripts for DeltaV batch recipe testing, ensuring seamless integration with production processes.
• Draft DeltaV batch recipes, ensuring alignment with manufacturing specifications and process requirements.

Requirements:

• Experience with pharmaceutical and biopharmaceutical processes, including commissioning, qualification, and validation.
• Knowledge of DeltaV batch processes and recipe creation/testing is highly desirable.
• Proven expertise in facilities, HVAC, equipment, or cleaning validation is required for the respective roles.
• Strong analytical and problem-solving skills with a good understanding of industry regulations and standards.
• Experience with risk-based validation approaches and developing protocols in compliance with regulatory requirements.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy

Our client is a leading logistics company. They are looking for a Software Engineer to assist their IT team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Software Engineer is responsible for:

Duties

• Assist in all SDLC phases, including design, development, testing, maintenance, and support.
• Contribute to Agile processes and apply DevOps practices.
• Provide user training for effective system utilization.
• Analyze business processes to improve system efficiency and alignment with organizational goals.
• Collect and document system requirements, ensuring accuracy and data integrity.
• Customize ERP system, develop reports, and troubleshoot issues with cross-functional teams.

Requirements

• Bachelor's degree in Information Technology/ Computer Science or related field
• Min 3 years of experience in full stack software development, including 3 cycles of implementation
• Proven expertise in ERP system support, analysis and customization
• Strong troubleshooting skills and proficiency in SQL and database management
• Proficiency in specific ERP development tools and frameworks (e.g., BAQS, Dashboards, BPMs, UD fields)
• Experienced in developing application using .NET Framework, C# will be preferred
• Experience with Epicor, Navision and Microsoft development technologies like C/AL, Dynamics NAV/ Business Central, .NET and Azure will be advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Job description

Roles & ResponsibilitiesAnalytical Laboratory:

• Process control (Eg. Production parameter control)
• Quality control (Eg. Finished goods periodical testing)
• Familiar with the operations/technique of analytical instruments
• R&D of new processes on a lab-scale
• Maintain and control of laboratory analytical and testing records

Process:

• Perform First-Article testing for new customers or parts, prior to mass production
• Perform review/gap analysis on customer’s specifications for chemical processes, with adequate process control measures
• Involve in quality issues investigations, troubleshooting, root cause analysis and corrective action implementation
• Lead investigations for recovery action on any non-conformity
• Control of chemical logistics for entirety of production

Waste-water treatment plant (WTP):

• Manage and maintain WTP at optimum system performance for treatment of chemical waste
• Troubleshoot WTP system issues when waste discharge is non-compliant to Trade Effluent standards
• All other tasks that might be assigned from time to time

Responsibility:

• Responsible for provision, deployment, configuration, and administration of many different pieces of network and security-related hardware and software.
• Responsible for evaluate, test, and troubleshoot technologies when new technologies are onboard
• Responsible for provide technical support for resolution of customer problems, incidents, issues, requests, and queries
• Responsible for IT Governance on Network Security with monitoring and control tasks to ensure processes and implementations are executed correctly
• Experience with firewall rules implementation and troubleshooting upon incidents.
• Involve in update/upgrade/migration of security tools used by the team
• Manage cybersecurity projects & coordinate with customer to deliver security solutions and initiatives timely.
• Monitor, investigate and develop strategies to lead security incident responses efforts and recover from security breaches.
• Any other ad-hoc duties as assigned by supervisor

Requirements:

• Bachelor Degree/Diploma in Information Security or related field;
• Applicants with at least 2-4 years of relevant experience
• Preferably with Vulnerability Assessment & Risk Assessment experience
• Strong knowledge and understanding of IT infrastructure and security operations
• Knowledge and understanding of Endpoint security, IDPS, WAF, APT, FW, Cloud Security

Interested applicants, please Email , and look for

Jensen Fang Lifa

[email protected]

Recruit Express Pte Ltd

EA License No. 99C4599

EA Personnel Registration Number: R2197080

We regret that only shortlisted candidates will be contacted.

Job Summary

We are seeking an MES Syncade Automation Engineer to join our on-site, multi-disciplinary team. This role plays a critical part in the design, testing, and troubleshooting of recipes in Syncade, ensuring seamless compliance with regulatory standards throughout the project lifecycle up to production handover.

Key Responsibilities

• Collaborate with project teams to support and align with product and production-specific requirements.
• Design, test, and modify recipes under change control during design, start-up, qualification, and production stages.
• Ensure compliance with cGMP by documenting electronic batch records (eBR), standard operating procedures (SOP), and operational reports.
• Identify and implement process improvements while adhering to safety, hygiene, environmental, and quality regulations within your area of responsibility.

Job Requirements

Essential Skills

• Extensive experience with Emerson Syncade and DeltaV.
• Proficiency in Recipe Authoring and Troubleshooting within Syncade; experience with other MES platforms is a plus.
• Strong experience in Bioprocess Automation.
• Solid understanding of GMP regulations.
• Good experience in Commissioning and Qualification.

Nice to Have Skills

• Experience working in the Life Sciences Industry.

Qualifications

• Master’s or Bachelor’s degree in a relevant engineering discipline.
• Proven expertise in structured and well-organized work practices with a focus on innovative solutions.
• Strong interpersonal and team collaboration skills.
• In-depth understanding of IT and process control systems, with a sharp eye for operational optimization opportunities.
• Effective communication skills at all organizational levels, both internally and externally.
• Demonstrated ability to take ownership of systems and work responsibly.

Are you a Mechanical Engineer with expertise seeking to make a valuable contribution to the success of a product?

Super Tomato is a company that offers a comprehensive range of automation services, including design, fabrication, and assembly, for our corporate clients. Our expertise lies in automation and robotics.

We are currently looking for a motivated and competent Mechanical Engineer to design our upcoming product.

As a Mechanical Design Engineer at Super Tomato, you will play a crucial role in designing our next product. You will be responsible for every stage of the process, from ideation and prototyping to design validation, manufacturing, and reliability testing.

Your task will be to solve a given problem statement and conduct research to 3D print, test, and eventually bring it for fabrication and final assembly.

Your experience with mechanisms will be critical as it is required in significant part of our projects.

This product will have a significant impact on the public, as it will be deployed in high-traffic areas. You will be able to build a robust portfolio and showcase your skills.

If you are shortlisted, we will invite you to our office for a physical viewing of the product.

Responsibilities

• Hands-on assembly
• Designing products from scratch
• Sizing of components
• Communicating effectively with the vendor
• Conduct thorough testing of designs
• Cost-down

Qualifications

Having prior experience in designing mechanisms is highly desirable for this position. In addition, if you possess experience working with systems that are involved in food handling, that would be a great advantage.

NBCUNIVERSAL INTERNATIONAL

We create world-class content, which we distribute across our portfolio of film, television, and streaming, and bring to life through our theme parks and consumer experiences. We own and operate leading entertainment and news brands, including NBC, NBC News, MSNBC, CNBC, NBC Sports, Telemundo, NBC Local Stations, Bravo, USA Network, and Peacock, our premium ad-supported streaming service. We produce and distribute premier filmed entertainment and programming through Universal Filmed Entertainment Group and Universal Studio Group, and have world-renowned theme parks and attractions through Universal Destinations & Experiences. NBCUniversal is a subsidiary of Comcast Corporation.

Here you can be your authentic self. As a company uniquely positioned to educate, entertain and empower through our platforms, Comcast NBCUniversal stands for including everyone. Our Diversity, Equity and Inclusion initiatives, coupled with our Corporate Social Responsibility work, is informed by our employees, audiences, park guests and the communities in which we live. We strive to foster a diverse, equitable and inclusive culture where our employees feel supported, embraced and heard. Together, we’ll continue to create and deliver content that reflects the current and ever-changing face of the world.

CNBC INTERNATIONAL

CNBC is the world’s number one business and financial news network. Its mission is to help the influential and aspirational make astute decisions to get ahead by providing live market updates, breaking news, in-depth analysis and exclusive interviews.

CNBC’s vast portfolio includes CNBC.com, the online destination for global business; CNBC PRO, the network’s premium subscription service that provides real-time global market data and market analysis, as well as a growing slate of live and virtual events where consumers can experience CNBC’s award-winning journalism, live.

With headquarters in New Jersey, London, Singapore, and Abu Dhabi, CNBC provides a truly global 24-hour business briefing for senior business leaders, the financial community and those with assets to invest or protect. Today the channel is available in more than 392 million homes worldwide. CNBC also boasts a growing audience across its social media and digital video platforms.

Visit www.cnbc.com for more information.

NBCUniversal is the parent company of CNBC.

OVERVIEW

As a Broadcast Engineer, you will be responsible for ensuring the seamless operation and optimal performance of all broadcast equipment and systems. Your role will involve maintaining high technical standards to guarantee the continuous and uninterrupted transmission of our originated channels. You will play a pivotal role in ensuring that all systems are fully operational, facilitating smooth broadcasting and minimal downtime. You will be the backbone of our broadcast operations, ensuring everything runs efficiently across CNBC Asia Pacific’s platforms.

KEY RESPONSIBILITIES

• Oversee the maintenance, troubleshooting, and operation of broadcast equipment and contribute to new installation projects
• Lead assigned engineering projects, managing the planning, design, and implementation phases
• Maintain and update system and infrastructure diagrams to ensure they reflect any changes to the facility or infrastructure
• Ensure continuous, uninterrupted operation of CNBC Asia Pacific’s originated channels
• Maintain and ensure the full operational functionality of production systems to support scheduled production activities
• Ensure post-production systems remain fully operational to meet post-production schedule
• Address and resolve technical issues promptly to minimize disruption to broadcast operations
• Perform routine and critical maintenance on on-air transmission equipment, studio equipment, Uninterruptible Power Supply (UPS), air conditioning and computers, ensuring timely and efficient service
• Perform front line maintenance for Mechanical & Electrical (M&E) systems, including air conditioning and UPS systems
• Liaise with external suppliers, manufacturers and third-party service providers as required to source fixes for any identified gaps
• Provide proactive, engaged technical support to the Engineering team and ensure all systems remain up-to-date and functional.

ESSENTIAL REQUIREMENTS

• Relevant experience in maintaining broadcast or mission critical IT systems
• Familiarity with video transcoding technology, video formats and codecs and file-based systems/workflows
• Proven ability to solve complex technical issues and a passion for continuous learning and tackling new challenges
• Ability to plan, prioritize and manage multiple tasks simultaneously, while effectively resolving problems
• Strong team player with excellent communication skills
• Willingness to work shifts including early mornings, late evenings, weekends and public holidays
• Willingness to serve as the on-call duty engineer, covering after office hours, weekends and public holidays.

DESIRED ATTRIBUTES

• Minimum 5 years of experience working in a similar role
• Hands on experience and knowledge with equipment such as Grass Valley Stratus/Edius System, Morpheus Ice, VizRT, GV Router/Multiviewer/Orbit, Ross systems and MediaKind systems
• Ability to read/update technical AutoCad drawings
• Familiarity with video transcoding technology, video formats and codecs, and file-based workflows
• Knowledge of or experience with Uplink Compression system, Video Contribution/ Distribution systems
• Knowledge of or experience in a broadcast live production environment.

The responsibilities associated with this position are not limited to the above description and may be modified at any time by the Company.

ADDITIONAL INFORMATION

As part of our selection process, external candidates may be required to attend an in-person interview with an NBCUniversal employee at one of our locations prior to a hiring decision. NBCUniversal's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law.

If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access nbcunicareers.com as a result of your disability. You can request reasonable accommodations by emailing [email protected].

Job Responsibilities

• Manage and be fully responsible for the delivery of TSI/Telecoms Package
• Support the Telecoms Lead Engineer in all other Telecoms activities
• Develop Telecoms Systems Specifications, TSI Scope of Work, and Bill of Materials
• Prepare Telecoms systems block diagram sketches
• Review telecoms systems studies such as PAGA coverage study, radio coverage study, VSAT link calculation, fibre optic link budget, etc.
• Prepare requisitions and perform Technical Bid Evaluation of Telecoms Systems
• Perform Telecoms power consumption, heat dissipation, weight estimation
• Liaise with client to resolve engineering comments and provide solution
• Coordinate with other disciplines and contractors on systems interfaces

Job Requirements

• Bachelor's Degree in Electrical & Electronics Engineering (Telecommunications)
• Minimum of 15 years of relevant experience in Telecoms Detailed Engineering in the Oil and Gas industry, with at least 8 years' experience in Telecoms Package management
• Knowledge of international regulations, codes, and standards affecting Telecoms Systems
• Knowledge of Telecoms studies and calculations
• Proficient in writing Telecoms specifications
• Team player who can interact effectively with colleagues from other disciplines, clients, and suppliers

Job Responsibilities

• Responsible for the delivery of the TSI/Telecoms Package
• Support the Telecoms Lead Engineer in all other Telecoms activities
• Develop Telecoms Systems Specifications, TSI Scope of Work, and Bill of Materials
• Prepare Telecoms systems block diagram sketches
• Review telecoms systems studies such as PAGA coverage study, radio coverage study, VSAT link calculation, fiber optic link budget, etc
• Prepare requisition and perform technical bid evaluation of Telecoms Systems
• Perform telecoms power consumption, heat dissipation, and weight estimation
• Liaise with clients to resolve engineering comments and provide solutions
• Coordinate with other disciplines and contractors on systems interfaces

Job Requirements

• Bachelor's Degree in Electrical and Electronics Engineering (Telecommunications)
• Minimum of 12 years of experience in Telecoms Detailed Engineering in the Oil and Gas industry, preferably on offshore projects
• Knowledge of international regulations, codes, and standards affecting Telecoms Systems
• Knowledge of Telecoms studies and calculations
• Proficient in writing Telecoms specifications
• Team player who can interact effectively with colleagues from other disciplines, clients, and suppliers

Senior Infrastructure Engineer (WINTEL / RHEL / MCSA) - CPIB - Very Senior / Acting TL role

Provide operation and administration support on system infrastructure according to the agreed service levels.

• System administration;

• Backup and recovery administration;

• Server security administration;

• Performance and fault management;

• Report requirements; and

• Server management support.

Type of system infrastructure includes:

• Physical Servers;

• Virtual Machines (VMware, Hyper-V);

• Windows Active Directory (AD, DNS, DHCP, Group Policy) <- This is a must.

• Storage (SAN);

• Backup (Veritas, Backup-exec, backup appliance).

Type of Operating System includes:

• Windows Server 2016/2019/2022

• Experience with RedHat Linux is a bonus

Requirements

• Minimum 3 years’ experience in Microsoft Server administration

• Microsoft Certified Solutions Associate (MCSA)

• Have a solid technical skill with diversity of thought and creative solutions that are in the best interests of our customers globally.
• Develop, test, and debug automated tasks (Apps, Systems, Infrastructure)
• Troubleshoot priority incidents, facilitate blameless post-mortems.
• Work with development teams throughout the software life cycle ensuring sustainable software releases.
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions.
• Lead and participate in performance tests; identify bottlenecks, opportunities for optimization, and capacity demands.
• Adhere to firm-wide architecture standards, risk management and security policies.
• Team player and ability to work in Global Team setup, product owners and business team to develop, build & support application.
• Communicate and collaborate on development items with global team, as well as raise/work to resolve issues impacting development.
• Participate in quality assurance, peer reviews and code reviews Qualifications.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• A successful history of manipulating, processing, and extracting value from large datasets.
• Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.
• Experience supporting and working with cross-functional teams in a dynamic environment.
• Up to date with latest ongoing technologies in the industry
• Well-spoken/Articulate and Emotionally intelligent
• Well connected to industry members, attends developer and tech meetups.
• Strong understanding of DevOps practices, tools, and techniques.
• Degree in Computer Science/ IT or other related fields
• Experienced deploying application in a containerized environment using Docker/Kubernetes/PCF/Openshift/AWS etc.
• In-Depth OS experience (RHEL, Ubuntu, Windows Server) with strong debugging, troubleshooting, and problem-solving skills.
• Experience in site reliability engineering in one of the following languages: Python, Java, PowerShell, shell scripting.
• Hand-on experience especially in deployment, monitoring and operations, such as Prometheus, Splunk, Elasticsearch, Grafana
• Strong working knowledge of modern development technologies and tools such Agile, CI/CD, Git, Terraform and Jenkins.
• Build processes supporting data transformation, data structures, metadata, dependency, and workload management.
• Good understanding of networking protocols and cybersecurity best practices in public cloud environment
• Advanced working SQL knowledge and experience working with RDBMS, Hadoop, and NoSQL DB.
• Experience performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.

Senior Application Engineer

• Company: SemiCon
• Salary: $ 4,200 - $ 5,800 (Dep on experiences)
• AWS + VB + PB
• Benefits: Dental and Medical claim
• Monday - Friday, 8.30am - 5.30pm
• Location: Ang Mo Kio

Job Responsibilities:

• Define and Document Equipment process requirement and specification
• Perform Process characterization to optimize critical process paths in order to meet equipment specification
• Review, simplify and optimize Internal Buy Off specification for equipment together with Quality Assurance Department
• Participate in continuous process improvement activities to enhance Equipment capability
• Support Equipment manufacturing activities by helping to trouble-shoot and resolve process-related issues
• Support other internal departments to handle customers’ process related issues and recommend technical solutions
• Perform data analysis using statistical techniques and conduct process capability studies
• Transfer process knowledge to in house Engineers and Technicians to ensure optimal equipment performance
• Equipment UPH projection calculation base on specific process parameter

Job Requirements:-

• Degree in Production / Mechanical / Material Science Engineering
• At least 3 years experience in an equipment manufacturing environment with a process engineering and background
• Strong interest in the development of new manufacturing processes
• Experience in process design and control in the area of laser marking process
• Knowledge in Material Science will be added advantage
• Knowledge in cycle time calculation
• Trained in SPC, DOE and other statistical tools

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.We regret only shortlisted candidates will be notified.

Kok Jean Ray

Registration Number: R22110935

EA Licence No: 16C8004 (Elitez Pte Ltd)

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Manually fixing and unblocking bad changes server releases
Correcting, rolling-back, and fixing forward config changes
Reducing flaky integration tests
Fixing and re-enabling tests disabled for flakiness
Migrating integration tests to a new stack
Fixing bug and alert routing to correct team
Surfacing frequent pain points and errors for automated fix and/or mitigation.
The team will provide training, examples, documentation, and support via chat/GVC as needed for this person to succeed.

Exp: 4-6 years or 6-8 years of experience

Java development: JUnit, Bazel, Guice, Protobuf, gRPC
CI/CD: Jenkins, Docker, Kubernetes
Alerting/Monitoring: Prometheus, Grafana

Engineer (VSAT /Telecommunication) AMK

Occupation

TELECOMMUNICATIONS ENGINEER

Job Description & Requirements

Job Responsibilities:

• To perform corrective maintenance works, with given documents, diagrams etc, of integrated systems consisting of electrical, mechanical and electronic subsystems
• To perform preventive maintenance works at customer’s premises located in outdoor areas
• To perform diagnostic and evaluation bench test on RF equipment using common engineering tools and measuring equipment.
• To perform installation works with available Acceptance Test Procedures (ATP)
• To perform technical writing for documents like service reports, work procedures and manuals where applicable.

Job Requirements:

• Diploma in Mechatronics or Electronics and Tele-Communication or Avionics
• Proficiency in operating RF / MV and electronics test and measuring equipment
• Proficient in the use of test measuring equipment like multi-meter, spectrum analyzer, fibre optic tester etc
• Proficient in operating simple tools like drills, soldering iron etc
• Prior experienced in system maintenance works, operation of Satellite Communications Equipment/TCP / IP networking is an additional advantage
• Preferably to possess Class 3 (Manual) driving licence
• Good communication skills, self-motivating, analytical mind, love of outdoor work and good team player
• Singaporeans Only
• Working location: Ang Mo Kio Area

Maestro HR

damien lee tian hong

R1106726

16C8462

Mechanical Component Engineer

Do you enjoy being part of team that provides high-quality services for our customers?

Would you like to be in a team delivering world class service to our customers?

Be part of a successful Customer Service team

Baker Hughes Valves is a global technology company that designs, develops and manufactures the highest quality, most accurate and reliable control valves and safety valves products, services and solutions to our customers across a large range of process industries.

Partner with the best

As a Mechanical Component Engineer, you will be in charge of BoM and technical support for Pressure Safety Valves (Consolidated) and Control Valves (Masoneilan). You will also provide a global engineering support focused on Channel Partners and Aftermarket Centers for the selection, repair, maintenance, and replacement of Masoneilan and Consolidated products.

As a Mechanical Component Engineer, you will be responsible for:

• Executing design and analysis of assigned projects to develop valves meeting customer application needs, specification requirements, complying with local design/product standards.
• Reviewing customer specifications and “translating” customer specification in to order instructions for manufacturing of valves.
• Providing Retrofit solutions, with bills of material, drawing information, test specifications and processing instructions to meet quality and manufacturing requirements.
• Creating the design review process, ensuring accuracy, quality and design for manufacturability goals are met.
• Enabling the use of design tools (like 2D / 3D CAD (SolidWorks / ProE / UG), Excel, and in-house design calculations.
• Engaging with sales to support the quotation activities.
• Identifying, Own and Enable such initiatives which are in line with business objectives.

Fuel your passion

To be successful in this role you will:

• Have a Bachelors in mechanical / mechatronics from an accredited uni, (or a diploma / GED with at least 4 yr of experience in Engineering/Technology)
• Have 0-2 yr of Mechanical Engineering experience
• Be proficient in SolidWorks or similar Computer Aided Design software
• Possess knowledge of basic mechanical engineering design principles
• Have knowledge of geometric dimension and tolerance as it relates to individual parts and overall assemblies
• Be able to work independently and have good problem-solving skills.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

This role is a Full Time Regular, live in country

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities
• Comprehensive private medical care options
• Safety net of life insurance and disability programs
• Tailored financial programs
• Additional elected or voluntary benefits

About Us!

The mission of Housing & Development Board (HDB) is to provide affordable, quality housing and a great living environment where communities thrive. To achieve its mission, HDB aims to be data-driven to the core and adopt evidence-based decision making in developing better housing policies service, improving service delivery and optimising operations.

What Will You Do?

As a data engineer, you will play a key part in helping HDB begin its journey to be data-driven to the core. In this role, you will assume the following responsibilities:
• Create and maintain data architectures that meets the needs of HDB.
• Build and maintain data platforms required for storage, extraction, transformation, and loading of data from a wide variety of data sources.
• Improve discoverability and distribution of analytical data to data analysts and data scientists.
• Implement best practices in data security throughout the lifecycle of analytical data.

You will be a Great Fit if you:

• Background in Information Systems (IS), Computer Science or related field in a reputed institution.
• 3 years relevant experience in designing and maintaining data platforms such as data lakes, data warehouses and the associated data pipelines is preferred.
• Proficient in creating and maintaining complex data pipelines using tools such as Microsoft SQL Server Integration Services (SSIS).
• Knowledge of data platforms such as Spark, Flink, Kafka, SQL and NoSQL databases, Airflow
• Knowledge of the latest developments in data engineering and best practices in data management.
• Knowledge of analytical tools is an advantage e.g., SAS Viya, Tableau, PowerBI, Amazon SageMaker, ArcGIS Pro
• Knowledge in cloud computing, design and development is an advantage e.g., AWS, Azure, GCP
• Knowledge of cloud technologies in data platforms is a plus e.g. Snowflake, AWS Redshift, Google BigQuery, Azure Synapse.
• Strong project management and organization skills.
• Possess an eagerness to learn and impart new skills.
• Be a good team player.

Good to Have:

- Great Attitude to bring the best out our team
- Team Player; we work together as a team
- Possess an eagerness to learn and impart new skills
- Autonomous & Take ownership

Fresh graduates are welcomed.

Successful candidates will be offered a 1+1 year contract in the first instance. Conversion to perm is dependent on good performance.

Find out more about a career with HDB at www.hdb.gov.sg/cs/infoweb/about-us/careers

Please apply for the job through the Careers@Gov job portal as linked:

https://www.careers.hrp.gov.sg/sap/bc/ui5_ui5/sap/ZGERCFA004/index.html#/JobDescription/15488252/f7e66340-f414-1edf-b4b0-355f29ab3387

Job Description:

- Overseeing project progress and provide regular updates to management.

- Processes monthly progress claim for submission.

- Attending On-Site meetings whenever required.

- Thorough understanding of relevant industry, products, equipment and services provided to client.

- Develop long-term relationships with clients, through managing and interpreting their requirements.

- Sales of our products & facility management services

- Other duties as assigned

Job Requirements:

- Candidates with a locally recognized diploma or bachelor's degree in Engineering (Mechanical/Electrical) are highly welcome.

- Able to read and write in proficient English

- Prior experience in the construction related field is highly preferred

The Challenge

• Expand coverage in Contamination Control in fab process. Litho, Etching, CVD, Mini-E tools and critical process in UPW.
• Able to manage and harmonise pressure arising from leadtime, yield and uptime focused customer base.
• Maintain and grow customer base ranging from large multi-national accounts to smaller privately owned entities
• Manage complex sales with ability to sell across multiple levels within accounts
• Plan and execute sales efforts to meet or exceed corporate sales and revenue goals

· Identify, quantify and develop new opportunities through prospecting and networking

· Develop and facilitate close relationships with key customers

• Develop and maintain accurate account records, action plans, and sales forecasts
• Manage time and travel schedules to achieve maximum sales coverage effectively
• Perform and coordinate instrument demonstrations to gain customer confidence
• Use and maintain CRM account and opportunity records
• Keep management informed with regular reports on planned activities, account trends, economic conditions and competitive activities
• Share insights on new product or service opportunities based on continuous customer interactions and relationships
• Perform other related duties as assigned relating to Kaizen

The Ideal Candidate Profile

• Diploma or Bachelor’s degree in Engineering or Science.
• >2 years direct instrumentation sales experience into the semiconductor market
• Strong technical background
• Competency with customer relationship management tools (Salesforce preferred)
• Experience with structured sales techniques (Miller Heiman experience helpful)

The Talent and Key Responsibilities:

• Proven experience in a network support role, with a strong focus on datacenter and building networks.
• In-depth knowledge of firewall management and experience with firewall technologies, including Checkpoint and Palo Alto.
• Proficiency in supporting a variety of network devices, including Cisco routers and switches.
• Familiarity with WAN and LAN technologies, including routing protocols and network segmentation.
• Strong troubleshooting and analytical skills, with the ability to diagnose and resolve complex network issues.
• Relevant certifications in network technologies, such as CCNA, CCNP, Check Point Certified Systems Administrator (CCSA), and Palo Alto Networks Certified Network Security Engineer (PCNSE), are advantageous.

We regret that only shortlisted candidates will be notified.

Please kindly send in your updated CV (please include your current salary package with full breakdown and expected salary) to [email protected]. Your interest will be treated in strict confidence.

People Profilers Pte Ltd

DID: 6950 9738

http://www.peopleprofilers.com

Lim Yi Tian, Candy

EA License No. 02C4944
Registration No. R1109829